For All-Solid-State battery applications, Mg2＋-ion conducting polymer electrolytes and Mg-metal electrode are currently considered as alternate choices in place of Li＋-ion conducting polymer electrolytes/Li-metal el...For All-Solid-State battery applications, Mg2＋-ion conducting polymer electrolytes and Mg-metal electrode are currently considered as alternate choices in place of Li＋-ion conducting polymer electrolytes/Li-metal electrode. Present paper reports fabrication of All-Solid-State battery based on the following Mg2＋-ion conducting nano composite polymer electrolyte （NCPE） films： [85PEO： 15Mg（C104）2] ＋ 5% TiO2 （〈 100 nm）, [85PEO： 15Mg（CIO4）2] ＋ 3% SiO2（-8 nm）. [85PEO： 15Mg（CIO4）2] ＋ 3% MgO （〈 100 nm）, [85PEO：15Mg（C1O4）2] ＋ 3% MgO （-44 μm）. NCPE films were prepared by hot-press technique. Solid Polymer Electrolyte （SPE） composition： [85PEO： 15Mg（CIO4）2], identified as high conducting film at room temperature, has been used as ISt--phase host and nano/micro particles of active （MgO）/passive （SiO2, TiO2） fillers as IInd-phase dispersoid. Filler particle dependent conductivity studies identified above mentioned NCPE films as optimum conducting composition （OCC） at room temperature. Ion transport behavior of SPE/NCPE film materials was investigated previously. Present paper reports materials characterization and cell performance studies on All-Solid-State batteries： Mg （Anode） Ⅱ SPE or NCPE films tt C＋MnO2＋Electrolyte （Cathode）. Open circuit voltage （OCV） obtained was in the range： 1.79-1.92 V. The batteries were discharged at room temperature under different load conditions and some important battery parameters have been evaluated from plateau region of cell-potential discharge profiles. All the batteries performed quite satisfactorily specially under low current drain states.展开更多
A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effec...A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effect of metal as a liquid fuel, we report here the impact of the thermal and electrochemical oxidation behavior of nano Sn （-100 nm）, comparing with micro-sized （-5 μm） and macro-sized （4350 μm） Sn. The thermogravimetric analysis and the monitoring OCV test indicate that the distinct property of nano-sized Sn results in a favorable thermal oxidation behavior near the melting point and a promising power performance due to enhanced fuel transport to the anode. However, the accumulated Sn oxide at the reaction interface during a discharge test towards the limitation of further electrochemical oxidation.展开更多
文摘For All-Solid-State battery applications, Mg2＋-ion conducting polymer electrolytes and Mg-metal electrode are currently considered as alternate choices in place of Li＋-ion conducting polymer electrolytes/Li-metal electrode. Present paper reports fabrication of All-Solid-State battery based on the following Mg2＋-ion conducting nano composite polymer electrolyte （NCPE） films： [85PEO： 15Mg（C104）2] ＋ 5% TiO2 （〈 100 nm）, [85PEO： 15Mg（CIO4）2] ＋ 3% SiO2（-8 nm）. [85PEO： 15Mg（CIO4）2] ＋ 3% MgO （〈 100 nm）, [85PEO：15Mg（C1O4）2] ＋ 3% MgO （-44 μm）. NCPE films were prepared by hot-press technique. Solid Polymer Electrolyte （SPE） composition： [85PEO： 15Mg（CIO4）2], identified as high conducting film at room temperature, has been used as ISt--phase host and nano/micro particles of active （MgO）/passive （SiO2, TiO2） fillers as IInd-phase dispersoid. Filler particle dependent conductivity studies identified above mentioned NCPE films as optimum conducting composition （OCC） at room temperature. Ion transport behavior of SPE/NCPE film materials was investigated previously. Present paper reports materials characterization and cell performance studies on All-Solid-State batteries： Mg （Anode） Ⅱ SPE or NCPE films tt C＋MnO2＋Electrolyte （Cathode）. Open circuit voltage （OCV） obtained was in the range： 1.79-1.92 V. The batteries were discharged at room temperature under different load conditions and some important battery parameters have been evaluated from plateau region of cell-potential discharge profiles. All the batteries performed quite satisfactorily specially under low current drain states.
基金the financial support from the R&D Convergence Program of NST (National Research Council of Science & Technology) of Republic of Korea
文摘A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effect of metal as a liquid fuel, we report here the impact of the thermal and electrochemical oxidation behavior of nano Sn （-100 nm）, comparing with micro-sized （-5 μm） and macro-sized （4350 μm） Sn. The thermogravimetric analysis and the monitoring OCV test indicate that the distinct property of nano-sized Sn results in a favorable thermal oxidation behavior near the melting point and a promising power performance due to enhanced fuel transport to the anode. However, the accumulated Sn oxide at the reaction interface during a discharge test towards the limitation of further electrochemical oxidation.
