Enhanced Evaporation of Ternary Mixtures in Porous Medium with Microcolumn Configuration

The high surface area of porous media enhances its efficacy for evaporative cooling,however,the evaporation of pure substances often encounters issues including local overheating and unstable heat transfer.To address these challenges,a volume of fluid(VOF)model integrated with a species transport model was developed to predict the evaporation processes of ternary mixtures(water,glycerol,and 1,2-propylene glycol)in porous ceramics in this study.It reveals that the synergistic effects of thermal conduction and convective heat transfer significantly influence the mixtures evaporation,causing the fluctuations in evaporation rates.The obtained result shows a significant increase in water evaporation rates with decreasing the microcolumn size.At a pore size of 30μm and a porosity of 30%,an optimal balance between capillary forces and flow resistance yields a peak water release rate of 96.0%.Furthermore,decreasing the glycerol content from 70%to 60%enhances water release by 10.6%.The findings in this work propose the approaches to optimize evaporative cooling technologies by controlling the evaporation of mixtures in porous media.

A Formulation of the Porous Medium Equation with Time-Dependent Porosity: A Priori Estimates and Regularity Results

We consider a generalized form of the porous medium equation where the porosity ϕis a function of time t: ϕ=ϕ(x,t): ∂(ϕS)∂t−∇⋅(k(S)∇S)=Q(S).In many works, the porosity ϕis either assumed to be independent of (or to depend very little of) the time variable t. In this work, we want to study the case where it does depend on t(and xas well). For this purpose, we make a change of unknown function V=ϕSin order to obtain a saturation-like (advection-diffusion) equation. A priori estimates and regularity results are established for the new equation based in part on what is known from the saturation equation, when ϕis independent of the time t. These results are then extended to the full saturation equation with time-dependent porosity ϕ=ϕ(x,t). In this analysis, we make explicitly the dependence of the various constants in the estimates on the porosity ϕby the introduced transport vector w, through the change of unknown function. Also we do not assume zero-flux boundary, but we carry the analysis for the case Q≡0.

Casson Nanofluid Flow with Cattaneo-Christov Heat Flux and Chemical Reaction Past a Stretching Sheet in the Presence of Porous Medium

In the current work,inclined magnetic field,thermal radiation,and the Cattaneo-Christov heat flux are taken into account as we analyze the impact of chemical reaction on magneto-hydrodynamic Casson nanofluid flow on a stretching sheet.Modified Buongiorno’s nanofluid model has been used to model the flow governing equations.The stretching surface is embedded in a porousmedium.By using similarity transformations,the nonlinear partial differential equations are transformed into a set of dimensionless ordinary differential equations.The numerical solution of transformed dimensionless equations is achieved by applying the shooting procedure together with Rung-Kutta 4th-order method employing MATLAB.The impact of significant parameters on the velocity profile f(ζ),temperature distributionθ(ζ),concentration profileϕ(ζ),skin friction coefficient(Cf),Nusselt number(Nux)and Sherwood number(Shx)are analyzed and displayed in graphical and tabular formats.With an increase in Casson fluid 0.5<β<2,the motion of the Casson fluid decelerates whereas the temperature profile increases.As the thermal relation factor expands 0.1<γ1<0.4,the temperature reduces,and consequently thermal boundary layer shrinks.Additionally,by raising the level of thermal radiation 1<Rd<7,the temperature profile significantly improves,and an abrupt expansion has also been observed in the associated thermal boundary with raise thermal radiation strength.It was observed that higher permeability 0<K<4 hinders the acceleration of Casson fluid.Higher Brownian motion levels 0.2<Nb<0.6 correspond to lower levels of the Casson fluid concentration profile.Moreover,it is observed that chemical reaction 0.2<γ2<0.5 has an inverse relation with the concentration level of Casson fluid.The current model’s significant uses include heat energy enhancement,petroleum recovery,energy devices,food manufacturing processes,and cooling device adjustment,among others.Furthermore,present outcomes have been found in great agreementwith already publishedwork.

Heat-Generating Effects Involving Multiple Nanofluids in a Hybrid Convective Boundary Layer Flow on the Sloping Plate in a Porous Medium

The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.

Flow and Heat Transfer of a Dusty Williamson MHD Nanofluid Flow over a Permeable Cylinder in a Porous Medium

This study investigates the flow and heat transfer of dusty Williamson (MHD) Nanofluid flow over a stretching permeable cylinder in a porous medium. Dusty Williamson Nanofluid was considered due to its thermal properties and potential benefits of increasing the heat transfer rate. Firstly, partial differential equations are transformed into coupled non-linear ordinary differential equations through a similarity variables transformation. The resulting set of dimensionless equations is solved analytically by using the Homogony Perturbation Method (HPM). The effects of the emerging parameters on the velocity and temperature profiles as well as skin-friction coefficient and Nusselt number are publicized through tables and graphs with appropriate discussions. The present result has been compared with published papers and found to be in agreement. To the best of author’s knowledge, there has been sparse research work in the literature that considers the effect of dust with Williamson Nanofluid and also solving the problem analytically. Therefore to the best of author’s knowledge, this is the first time analytical solution has been established for the problem. The results revealed that the fluid velocity of both the fluid and dust phases decreases as the Williamson parameter increases. Motivated by the above limitations and the gaps in past works, therefore, it is hoped that the present work will assist in providing accurate solutions to many practical problems in science, industry and engineering.

Simulation of porous medium engine using a detailed chemical kinetics model

The Senkin code of package is used to simulate the the Chemkin chemical kinetics combustion process of a porous medium（PM） engine fueled by n-heptane. The code is modified to incorporate the Woschni heat transfer correlation and heat transfer model within a porous medium. A detailed chemistry mechanism of NOx formation is coupled with the detailed chemical kinetics mechanism of n-heptane. The code is applied to a zero- dimensional single-zone model of engine combustion. Influences of operating parameters on the performance of the PM engine are discussed. With the increase in the intake temperature and compression ratio, or with the decrease of the excess air ratio, the ignition timing of the PM engine obviously advances. It is found that the porous medium acting as a heat recuperator can considerably preheat the fuel-air mixture, which promotes the ignition and combustion in the cylinder. And the initial PM temperature is a critical factor controlling the compression ignition of the mixture.

Analytical solutions for dynamic pressures of coupling fluid-solid-porous medium due to P wave incidence

Wave reflection and refraction in layered media is a topic closely related to seismology,acoustics,geophysics and earthquake engineering.Analytical solutions for wave reflection and refraction coefficients in multi-layered media subjected to P wave incidence from the elastic half-space are derived in terms of displacement potentials.The system is composed of ideal fluid,porous medium,and underlying elastic solid.By numerical examples,the effects of porous medium and the incident wave angle on the dynamic pressures of ideal fluid are analyzed.The results show that the existence of the porous medium,especially in the partially saturated case,may significantly affect the dynamic pressures of the overlying fluid.

Slip flow of Maxwell viscoelasticity-based micropolar nanoparticles with porous medium: a numerical study

This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropolar is considered. Moreover, a porous medium saturates the stretching sheet. A set of similarity variables is introduced to derive the dimensionless ordinary differential equations of velocity, concentration, and temperature profiles. The numerical solution is computed by using the MATLAB bvp4c package. The salient flow features of velocity, concentration, and temperature profiles are described and discussed through various graphs. It is observed that with an increase in the slip parameter, the micro-rotation velocity also increases. The temperature of nanoparticles gets maximum values by varying the viscoelastic parameter and the porosity parameter while an opposite trend is noted for the micro-rotation parameter. The local Nusselt number and the local Sherwood number increase by increasing the viscoelastic parameter, the porosity parameter, and the slip velocity parameter. The graphical computation is performed for a specified range of parameters, such as 0 ≤ M ≤ 2.5, 0 ≤σm ≤ 2.5, 0 ≤ K1 ≤ 1.5, 0.5 ≤ Pr ≤ 3.0, 0 ≤σ≤ 1.5, 0.5 ≤ Sc ≤ 2.0, 0.2 ≤ Nb ≤ 0.8, and 0.2 ≤ Nt ≤ 0.8.

ON THE INTERACTION OF WATER WAVES AND SEABED BY THE POROUS MEDIUM MODEL

The interaction of water waves and seabed is studied by using Yamamoto's model, which takes into account the deformation of soil skeletal frame, compressibility of pore fluid flow as well as the Coulumb friction. When analyzing the propagation of three kinds of stress waves in seabed, a simplified dispersion relation and a specific damping formula are derived. The problem of seabed stability is further treated analytically based on the Mohr-Coulomb theory. The theory is finally applied to the coastal problems in the Lian-Yun Harbour and compared with observations and measurements in soil-wave tank with satisfactory results.

Measurement of Two Phase Flow in Porous Medium Using High-resolution Magnetic Resonance Imaging

Measurement of two phase flow in porous medium for sequestration was carried out using high-resolution magnetic resonance imaging (MRI) technique. The porous medium was a packed bed of glass beads. Spin echo multi sequence was used to measure the distribution of CO2 and water in the porous medium. The intensity images show that the fluid distribution is non-uniform due to its viscosity and pore structure of porous medium. The velocity distribution of fluids is calculated from the saturation of water and porosity of porous medium. The experimental results show that fluid velocities vary with time and position. The capillary dispersion rate donated the effects of capillary, which was largest at water saturations of 0.45. The displacement process is different between in BZ-02 and BZ-2. The final water residual saturation depends on permeability and porosity.

Utilization of Maxwell-Cattaneo law for MHD swirling flow through oscillatory disk subject to porous medium

The present study aims to investigate the salient features of incompressible, hydromagnetic, three-dimensional flow of viscous fluid subject to the oscillatory motion of a disk. The rotating disk is contained in a porous medium. Furthermore, a time-invariant version of the Maxwell-Cattaneo law is implemented in the energy equation. The flow problem is normalized by obtaining similarity variables. The resulting nonlinear system is solved numerically using the successive over-relaxation method. The main results are discussed through graphical representations and tables. It is perceived that the thermal relaxation time parameter decreases the temperature curves and increases the heat trans- fer rate. The oscillatory curves for the velocity field demonstrate a decreasing tendency with the increasing porosity parameter values. Two- and three-dimensional flow phenom- ena are also shown through graphical results.

Characterizations of PSD Fractal of Porous Medium

A volume-based method for measuring particle-size distribution (PSD) fractal dimensions of porous mediums was developed by employing laser size-analyzing technology. Compared with conventional approaches of using hydrometer or screen to determine PSD, this method can avoid calculation errors and measure smaller size-scale porous medium. In this paper the experimental porous mediums were brown soil, kaolin and sand soil. A micro-order of magnitude (10 -5 m) in particle-size interval could be shown in PSD results of brown soil and kaolin. The experiments indicated that brown soil had a nearly mono-fractal PSD character, while kaolin and sand soil showed multi-fractal PSD characters. By the adsorption isotherm experiments, the PSD fractal dimensions of the sand soil were also found to keep a linearly increasing relation with the linear adsorptive parameters of the soils in different intervals to adsorb benzene from aqueous solution.

Heat and Mass Transfer in MHD Visco-Elastic Fluid Flow through a Porous Medium over a Stretching Sheet with Chemical Reaction

This paper presents the study of convective heat and mass transfer characteristics of an incompressible MHD visco-elastic fluid flow immersed in a porous medium over a stretching sheet with chemical reaction and thermal stratification effects. The resultant governing boundary layer equations are highly non-linear and coupled form of partial differential equations, and they have been solved by using fourth order Runge-Kutta integration scheme with Newton Raphson shooting method. Numerical computations are carried out for the non-dimensional physical parameters. Here a numerical has been carried out to study the effect of different physical parameters such as visco-elasticity, permeability of the porous medium, magnetic field, Grashof number, Schmidt number, heat source parameter and chemical reaction parameter on the flow, heat and mass transfer characteristics.

Revisiting the methods for gas permeability measurement in tight porous medium

Permeability is a key parameter to describe fluid transport properties of porous medium; however, the permeability measurement is extremely difficult for tight porous medium, e.g. fine-grained rock or dense soil. In this paper, three methods for gas permeability measurement, i.e. steady state method, pulse decay method(PDM) and pressure oscillation method(POM), are first reviewed and then their advantages and drawbacks are discussed. Both analytical and numerical solutions of gas permeability are presented for the tight porous medium. The results show that the analytical method is relatively simple but only valid under certain conditions, whilst the numerical method is more robust and generic, which can take into account several factors such as porosity, saturation, gas leakage, and unconventional boundary conditions. The influence of the effective porosity on the permeability determination is further analyzed using the proposed numerical method. In this study, new pressure data interpretation procedures for PDM and POM are proposed, and the obtained results can serve as a guidance to define a proper method for permeability measurement of the tight porous medium.

COMPLEXITY OF ASYMPTOTIC BEHAVIOR OF SOLUTIONS FOR THE POROUS MEDIUM EQUATION WITH ABSORPTION

In this paper we analyze the large time behavior of nonnegative solutions of the Cauchy problem of the porous medium equation with absorption ut - △um ＋ yup = 0,where γ≥0,m〉 1and P〉m＋2/N We will show that if γ=0 and 0〈μ〈 2N/n（m-1）＋2 or γ 〉 0 and 1/p-1 〈 μ 〈 2N/N（m-1）＋2 then for any nonnegative function φ in a nonnegative countable subset F of the Schwartz space S（RN）, there exists an initial-value u0 ∈ C（RN） with limx→∞ uo（x）= 0 such that φ is an w-limit point of the rescaled solutions tμ/2u（tβ, t）, Where β = 2-μ（m-1）/4.

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic （MHD） flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper （Cu）, Silver （Ag）, Alumina （A1203） and Titanium Oxide （TiO2）. Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.

Melting heat transfer with radiative effects and homogeneous–heterogeneous reaction in thermally stratified stagnation flow embedded in porous medium

The present article deals with thermally stratified stagnation-point flow saturated in porous medium on surface of variable thickness along with more convincing and reliable surface condition termed as melting heat transfer.Homogeneous–heterogeneous reaction and radiative effects have been further taken into account to reconnoiterproperties of heat transfer.Melting heat transfer and phenomenon of homogeneous–heterogeneous reaction have engrossed widespread utilization in purification of metals,welding process,electroslag melting,biochemical systems,catalysis and several industrial developments.Suitable transformations are utilized to attain a scheme of ordinary differential equations possessing exceedingly nonlinear nature.Homotopic process is employed to develop convergent solutions of the resulting problem.Discussion regarding velocity,thermal field and concentration distribution for several involved parameters is pivotal part.Graphical behaviors of skin friction coefficient and Nusselt number are also portrayed.Concentration of the reactants is found to depreciate as a result of strength of both heterogeneous and homogeneous reaction parameters.With existence of melting phenomenon,declining attitude of fluid temperature is observed for higher radiation parameter.

HOMOGENIZATION OF A STATIONARY NAVIER-STOKES FLOW IN POROUS MEDIUM WITH THIN FILM

The article studies the homogenization of a stationary Navier-Stokes fluid in porous medium with thin film under Dirichlet boundary condition.At the end of the article,＂Darcy＇s law＂is rigorously derived from this model as the parameter ε tends to zero,which is independent of the coordinates towards the thickness.

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation(absorption)

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.

Linear stability of triple-diffusive convection in micropolar ferromagnetic fluid saturating porous medium

The triple-diffusive convection in a micropolar ferromagnetic fluid layer heated and soluted from below is considered in the presence of a transverse uniform magnetic field. An exact solution is obtained for a flat fluid layer contained between two free boundaries. A linear stability analysis and a normal mode analysis method are carried out to study the onset convection. For stationary convection, various parameters such as the medium permeability, the solute gradients, the non-buoyancy magnetization, and the micropolar parameters （i.e., the coupling parameter, the spin diffusion parameter, and the micropolar heat conduction parameter） are analyzed. The critical magnetic thermal Rayleigh number for the onset of instability is determined numerically for a sufficiently large value of the buoyancy magnetization parameter M1. The principle of exchange of stabilities is found to be true for the micropolar fluid heated from below in the absence of the micropolar viscous effect, the microinertia, and the solute gradients. The micropolar viscous effect, the microinertia, and the solute gradient introduce oscillatory modes, which are non-existent in their absence. Sufficient conditions for the non-existence of overstability are also obtained.