Agglomerating Growth of One-Dimensional Carbon Nano-Materials Synthesized from Ethanol Flames

One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically aligned＂ and ＂wrinkling-pileup＂. The present work studied the agglomerating process and the growth mechanism by using scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is thought that the size and distribution of the catalyst particles produced from pretreatment of the substrates play a key role during the formation of agglomerations. It is expected that the steady growth of ODCNMs in flames will be improved through the preparation of the catalysts.

China National Standards on Nano-Materials Issued for the First Time

On February 28th, 2005, AQSIQ (the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China), and SAC (the Standardization Administration of P. R. China)jointly hosted the press conference on seven items of national standards on nano-materials in Beijing. The seven items of national standards were approved on Sept. 29th and Dec. 27th, 2004 respectively by SAC, and publicized in Jan. 2005. They will be formally put into practice from April 1st, 2005.

Dynamic quasi-continuum model for plate-type nano-materials and analysis of fundamental frequency

A dynamic quasi-continuum model is presented to analyze free vibration of plate-type cubic crystal nano-materials.According to the Hamilton principle,fundamental governing equations in terms of displacement components and angles of rotations are given.As an application of the model,the cylindrical bending deformation of the structure fixed at two ends is analyzed,and a theoretical formula evaluating the fundamental frequency is obtained by using Galerkin's method.Meanwhile,the solution for the classical continuous plate model is also derived,and the size-dependent elastic modulus and Poisson's ratio are taken in computation.The frequencies corresponding to different atomic layers are numerically presented for the plate-type NaC l nano-materials.Furthermore,a molecular dynamics(MD)simulation is conducted with the code LAMMPS.The comparison shows that the present quasi-continuum model is valid,and it may be used as an alternative model,which reflects scale effects in analyzing dynamic behaviors of such plate-type nano-materials.

Transition metal embedded in nonmetal-doped T-carbon [110]: A superior synergistic trifunctional electrocatalyst for HER, OER and ORR

The design of efficient and low-cost multifunctional electrocatalysts for hydrogen evolution reaction(HER), oxygen evolution reaction(OER) and oxygen reduction reaction(ORR) is critical for the development of clean energy. Two-dimensional(2D) carbon-based nano-materials are becoming more and more popular in heterogeneous catalysis due to their cost-effective and multi-scale tunability as single-atom catalysis(SACs) substrates. In this paper, by using first-principles calculation, we designed and demonstrated a novel macropore T-carbon [110](TC) monolayer as 2D electrocatalyst substrate for HER/OER/ORR, and the synergistic modification of the transition metal and nonmetal atoms(TM-X) were investigated to enhance the multifunctional electrocatalytic performance. We screened out the Co embedded in N-doped TC(Co3@N-TC) from 30 TM@X-TC monolayers as a trifunctional electrocatalysts, which exhibits superior performance for HER/ORR/OER on both thermodynamic and kinetic scales, and with excellent thermal and electrochemical stability. Then, the TC monolayer is naturally macropore with a diameter of 5.36 A and exhibits excellent adsorption capacity for the intermediates and products of the redox reactions. Moreover, we revealed the origin of the electrocatalytic activity using the crystal orbital Hamilton population(COHP) and the molecular orbitals(MOs). The d orbital of Co3@N-TC is significantly hybridized with the p orbital of the intermediates, so that the lone electrons initially occupied in the antibonding state pair up and occupy the downward bonding state, allowing *OH to be appropriately adsorbed onto the TC monolayer. This work not only demonstrates that the TM@X-TC monolayer is a superior synergistic trifunctional electrocatalyst, but also reveals a macropore monolayer material with potential applications in electrocatalysis.

Preparation and electrochemical performance of nano-scale Ni(OH)_2 doped with zinc

Nano-scale Ni（OH）2 doped with Zn was prepared by precipitation transformation method and characterized by XRD and TEM. The electrochemical performance was investigated by cyclic voltammetry （CV） and constant current technology. The measurement results indicate that the lattice parameters of nano-scale Ni（OH）2 are changed and the agglomeration of particles becomes obvious with the increased Zn-doped content. Compared with un-doped one, the discharge specific capacities ofnano-scale Ni（OH）2 doped with 10% Zn are enhanced by 8% and 6%, respectively, at the discharge rate of 0.2C and 3C. After 110 cycles, the discharge specific capacity of the sample doped with 10% zinc is still above 85% of its initial capacity discharged at 0.2C. Therefore, a suitable Zn-doped content is beneficial to improving the discharge performance of nano-scale Ni（OH）2.

A comprehensive review of the effect of different kinetic promoters on methane hydrate formation

Gas hydrates have recently emerged as a better alternative for the production,storage,and transportation of natural gases.However,factors like slow formation rate and limited storage capacity obstruct the possible industrial application of this technique.Different types of promoters and synergists have been developed that can improve the kinetics and storage capacity of gas hydrates.This review focuses on different kinetic promoters and synergists that can be utilized to enhance the storage capacity of hydrates.The main characteristics,structure and the possible limitations of the use of these promoters are likewise portrayed in detail.The relationship between structure and storage capacity of hydrates have also been discussed in the review.Current status of production of gas from hydrates,their restrictions,and future difficulties have additionally been addressed in the ensuing areas of the review.

Synthesis and biochemical properties of fluorescent/magnetic bifunctional starch particles

Magnetic starch particles （MSPs） were synthesized in water-in-oil mieroemulsion at room temperature. MSPs were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectrometry （FTIR）, zeta potential system, thermogravimetric analysis （TGA） and vibrating sample magnetometry （VSM）. The average diameter of the MSPs was 220 nm, dispersed with well-proportioned size and magnetic resonance, the saturation magnetization was 3.64 A.mR/kg. MSP was coated with poly-L-lysine （PLL）, and then the surface of PLL-MSP was combined with fluorescein isothiocynate （FITC）. Results show that fluorescent/magnetic starch particles （FMSPs） are of stable photo-bleaching capability compared with free FITC, with low bio-toxicity and certain function of magnetic separation. It is expected that FMSPs are bifimctional nano-materials including fluorescence labelling and magnetic separation.

Experimental Research on Toluene Degradation in Plasma as the Driving Force of Nanomaterials

Plasma technology has some shortcomings, such as higher energy consumption and byproducts produced in the reaction process. However non-thermal plasma associated with catalyst can resolve these problems. So this kind of technology was paid more and more attention to treat waste gas. In this paper, we make use of this technology to decompose toluene under different electric field and packed materials. At the same time, the mechanism of toluene decomposition using plasma and catalyst is discussed. The experimental results show toluene decomposition increases with electric field strength increasing and flow velocity and initial concentration decreasing. There are four conditions in plasma: without packed materials (1);with packed materials (2);with BaTiO3 in the surfaces of packed materials (3);and with nanometer Ba0.8Sr0.2Zr0.1Ti0.9O3 (4). Toluene decomposition represents a obvious trend, that is, η(4) > η(3) > η(2) > η(1). The best decomposition efficiency of toluene arrives at 95%.

High temperature oxidation of chromium with nanometric ceria sol-gel coating

Isothermal oxidation behavior of chromium with and without nanometric sol-gel CeO2 coating is studied at 1000℃ in air. Scanning electron microscopy （SEM） and transmission electron microscopy （TEM） are used to examine the surface morphology and microstructure of their oxide films. It is found that ceria coating greatly improves the anti-oxidation property of chromium. Laser Raman spectrometer and X-ray diffraction spectrometer （XRD） are also used to study the stress level in oxide films formed on ceria-coated and ceria-free Cr. The difference in oxidation behavior is mainly attributed to the fact that ceria greatly reduces the growth speed and grain size of Cr2O3 film, and this fine grain-sized Cr2O3 film probably has better high temperature plasticity, i.e. oxide film can relieve parts of compressive stress by means of creeping. XRD and Raman testing results both show the stress declination due to nano-CeO2 application, and their deviation is analyzed conceming to the rare earth effect.

FORMING AND PRECISION MACHINING TO NANOMATERIALS LUMP

The technology of forming and machining lump nano-materials has beeninvestigated. Grinding, abrasive machining test has been conducted to Fe, Co, Ni and Al lumpnano-materials. Experiments have been done to measure grinding force, grinding thermal, machiningroughness and micro-hardness. Image analysis is carried out by metallographic and scanning tunnelmicroscopic microscope. Researches provide the basis data for forming and machining lumpnano-materials.

The Influences of Ultrasonic on Embedding Nano Particles into Porous Fabric Materials

The feasibility of embedding 40nm ZnO particles into porous textile material by using ultrasonic and its influence factors were studied. Through investigations, it is proved that the higher the concentration of nanoparticle suspension is, the higher the weight of embedding percentage (EPW) is. However, the increasing trend of EPW will minish quickly when the concentration exceeds 1%. In addition, the longer the process time of ultrasonic is, the higher EPW is. EPW is always higher when the distance between film and ultrasonic transducer is 1/2λ and 3/2λ, and lower when the distance is 1λ and 2λ. For 40nm ZnO particles, EPW of the film effected by ultrasonic with the frequency of 42kHz reaches the maximum.

Effect of PVP, PVA and POLE surfactants on the size of iridium nanoparticles

Commonly transition metal nano particle are synthesized by physical, chemical or electrochemical methods. In the present work colloidal iridium nanoparticles were synthesized by chemical oxidation method with different surfactants like poly vinyl pyrrolidone (PVP), poly vinyl alcohol (PVA) and poly oxyethylene lauryl ether (POLE). It was found that shape and size of Ir-nano particles resulted were related to kind of capping agent (surfactant) used. The characterization of the synthesized nano particle has been carried out by UV-vis, X-ray diffraction (XRD), FT-IR, scanning electron microscopy (SEM) and transmission electron microscopic (TEM) techniques. UV-vis and FT-IR confirm the oxidation of IrCl3 into IrO2 while XRD confirms the amorphous nature of the iridium nanoparticles synthesized. The morphology and size of the particle were confirmed by TEM. The average particle size determined by Scherrer equation was about 4.12 nm to 4.23 nm with PVP, 2.74 to 3.36 nm with PVA and 20.41 to 42.25 nm with POLE. Poly oxyethylene lauryl ether particles were not further analyzed because of their large size and less stability. Further particle size was confirmed with TEM, which was 4.5 nm with PVP and 7.0 nm with PVA. The particles are spherical with no agglomeration tendency.

Ornaments as Means of Efficient Reinforcement in Heritage Buildings

Heritage consists of those items people have inherited and want to keep, as they give them the sense of the past of their cultural identity, but these items, especially the buildings, could not face deteriorations during their period of life, such as the change of loads, the act of the environmental conditions, the effect of the duration time of the materials and the misuse of the occupants. They need special treatments and reinforcements to keep the structural state or to gain extra forces to receive the new loads. But the traditional ways of reinforcement do not prove endless solutions as the most means of the deteriorations from the nature. So, the liability issue is how to find the least reinforcement within the means of technology with the least deterioration and in a less time or by other ways efficiently. The hypothesis considers that the ornaments in some heritage buildings are found in critical levels of the construction which can share in an efficient way in the reinforcement processes of such buildings.

Synthesis and Characterization of Copper Substituted Nickel Nano-Ferrites by Citrate-Gel Technique

Mixed Copper substituted Nickel nano-ferrites having the chemical formula Ni1-xCuxFe2O4 (where x = 0, 0.2, 0.4, 0.6, 0.8, 0.9 and 1.0) were synthesized by citrate gel technique. The crystal structure characterization and morphology were investigated by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). An elemental composition of the samples were studied by energy dispersive X-ray Spectroscopy (EDS). Lattice parameter, X-ray density, Volume of the Unit Cell and The values of the hopping length for octahedral (dB) and tetrahedral (dA) sites were calculated. The observed results can be explained on the basis of composition.

Development of Nanopowder Synthesis Using Induction Plasma

The application of induction plasma technology developed for the synthesis of nano- metric powders is summarized. A brief description of the scientific basis for the induction plasma processes is given, followed by the presentation of an induction plasma system developed by Tekna, together with various examples of the nanopowders synthesized using its facilities. The advantages of the induction plasma process over alternative techniques and its adaptability into industrial- scale operation is particularly illustrated. Some specific issues related to the nanopowder synthesis process are also discussed.

一种新型简捷式疲劳裂纹修复仪概念设计（英文）

疲劳是零件或结构失效的主要原因.为此设计了一种操作灵活的新型疲劳裂纹修复仪,其可通过可编程控制器和机械臂实现自动工作.纳米材料在低于零件或结构熔点的温度下被用以修复裂纹.裂纹修复仪主要由机身、手柄、相机、喷嘴和活塞组成.其利用激光作为热源,温度传感器对温度进行检测并对纳米材料流通道进行控制.来自外部光源的激光通过喷嘴中心孔照射到工件裂纹处,喷嘴中心孔被粉末通道的出口环绕,粉末出口的方向和激光的焦点重合,在激光加热工件之后喷上粉末,并在材料沉积工序之后进行压力冲击.距离传感器能够使修复过程随着裂纹的发现和探测来进行.本设计结构紧凑,原理简单,可以高效完成裂纹修复.

The Influence of Transmutation Conditions on the Adulteration Performance of Nano-scale Nickel Hydroxide

Spherical Nano-scale nickel hydroxide was prepared through precipitation transmutation method by controlling the transmutation conditions in this paper. The measurement results of XRD and TEM indicate that the crystallization of the nano-scale nickel hydroxide isβ-style and its shape is spherical with a diameter of 40～70 nanometer. The adulteration experiment shows that the adulteration ratio of nano- scale Ni(OH) 2 in common spherical micrometer-scale Ni(OH) 2 exists a optimal value (1∶9). And at this point, the utilization ratio of Ni(OH) 2 in electrodes can be raised by 10%, and the nano-scale nickel hydroxide with sphericity shape shows a better adulteration performance than that with needle shape.

Electrochemical performance of nano-scale β-Ni(OH)_2 prepared at different transformations of pH value

The influence of transforming pH values on the electrochemical performance of nano-scale Ni （OH）2 was analyzed. The measurement results of XRD indicate that the nano-scale Ni （OH） 2 prepared at different transformations of pH value is β （ Ⅱ ）-phase with different crystal lattice parameters. Cyclic voltammograms （CV） and electrochemical impedance spectroscopy（EIS） measurement results show that transformations of pH value affect the proton diffusion coefficient （D） and charge-transfer resistance （Re,） of the material. The simulation of.cell experiment shows that the sample prepared at a pH of 10. 1 exhibits the maximum specific capacity （327.8 mAh/g） and higher discharge platform, the discharge performance of electrodes depends on both D and Rct, so the kinetics characteristics that electrodes reaction is controlled by both mass-transfer step and charge- transfer step are put forward.

Preparation and Photo-properties of Nanosize ZnS and Zn(en)_2S

The precursore Zn（en）2S （en=ethylenediamine） were prepared via a solvothermal process from elemental sulfur and zinc using ethylenediamine as a solvent. Detailed characterizations of the infrared （IR） absorption spectrum, powder X-ray diffraction （XRD） and thermogravimetric analysis （TG） confirmed two en coordinated with Zn2+ to form a complex cation. The morphological property was also characterized by transmission electron microscopy （TEM ） and electron diffraction analysis （ED）. Phase-pure hexagonal wurtzite ZnS products were obtained by annealing the precursor in nitrogen stream at about 900 ℃. Zn（en）2S showed a nanosize of about 30 nm, and ZnS of about 60 nm. The fluorescence spectra were also studied. PL results showed that Zn（en）2S excited a fluorescence at 452 nm.

Intelligent nanomaterials for cancer therapy:recent progresses and future possibilities

Intelligent nanomedicine is currently one of the most active frontiers in cancer therapy development.Empowered by the recent progresses of nanobiotechnology,a new generation of multifunctional nanotherapeutics and imaging platforms has remarkably improved our capability to cope with the highly heterogeneous and complicated na-ture of cancer.With rationally designed multifunctionality and programmable assembly of functional subunits,the in vivo behaviors of intelligent nanosystems have become increasingly tunable,making them more efficient in performing sophisticated actions in physiological and path-ological microenvironments.In recent years,intelligent nanomaterial-based theranostic platforms have showed great potential in tumor-targeted delivery,biological barrier circumvention,multi-responsive tumor sensing and drug release,as well as convergence with precise medication approaches such as personalized tumor vaccines.On the other hand,the increasing system complexity of anti-cancer nanomedicines also pose significant challenges in charac-terization,monitoring and clinical use,requesting a more comprehensive and dynamic understanding of nano-bio interactions.This review aims to briefly summarize the recent progresses achieved by intelligent nanomaterials in tumor-targeted drug delivery,tumor immunotherapy and temporospatially specific tumor imaging,as well as impor-tant advances of our knowledge on their interaction with biological systems.In the perspective of clinical translation,we have further discussed the major possibilities provided by disease-oriented development of anti-cancer nano-materials,highlighting the critical importance clinically-oriented system design.