[Objective] The aim was to observe the antibacterial effect of nano-scale Titanium dioxide on parasitic bacterium of Nanfeng Citrus in storage period.[Method] Nano-scale Titanium dioxide was prepared by dibutyl phthal...[Objective] The aim was to observe the antibacterial effect of nano-scale Titanium dioxide on parasitic bacterium of Nanfeng Citrus in storage period.[Method] Nano-scale Titanium dioxide was prepared by dibutyl phthalate through sol-gel method under anhydrous conditions,and orthogonal experiment was used to determine optimum conditions for nano-scale Titanium dioxide preparation,and structure characterization of nano-scale Titanium dioxide was carried out by X-Ray diffractometer.Oxford cup method was used to explore inhibition effect of nano-scale Titanium dioxide suspension on the activity of normal parasitic bacterium of Nanfeng Citrus.Simultaneously,the empirical preservation test was carried out.[Result] The average diameter of nano-scale Titanium dioxide powder attained to 14.6 nm,actual average yield could reach 90.83% with RSD（Relative Standard Deviation）of 0.86%.[Conclusion] Nano-scale Titanium dioxide had good antibacterial effect on the parasitic bacterium of Nanfeng Citrus in storage period.展开更多
To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu allo...To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.展开更多
With the device size gradually approaching the physical limit, the small changes of the Si(001)/SiO 2 interface in silicon-based devices may have a great impact on the device characteristics. Based on this, the bridge...With the device size gradually approaching the physical limit, the small changes of the Si(001)/SiO 2 interface in silicon-based devices may have a great impact on the device characteristics. Based on this, the bridge-oxygen model is used to construct the interface of different sizes, and the finite size effect of the interface between fine electronic structure silicon and silicon dioxide is studied. Then, the influence of the finite size effect on the electrical properties of nanotransistors is calculated by using the first principle. Theoretical calculation results demonstrate that the bond length of Si-Si and Si-O shows a saturate tendency when the size increases, while the absorption capacity of visible light and the barrier of the interface increase with the decrease of size. Finally, the results of two tunneling current models show that the finite size effect of Si(001)/SiO 2 interface can lead to a larger change in the gate leakage current of nano-scale devices, and the transition region and image potential, which play an important role in the calculation of interface characteristics of large-scale devices, show different sensitivities to the finite size effect. Therefore, the finite size effect of the interface on the gate leakage current cannot be ignored in nano-scale devices.展开更多
文摘[Objective] The aim was to observe the antibacterial effect of nano-scale Titanium dioxide on parasitic bacterium of Nanfeng Citrus in storage period.[Method] Nano-scale Titanium dioxide was prepared by dibutyl phthalate through sol-gel method under anhydrous conditions,and orthogonal experiment was used to determine optimum conditions for nano-scale Titanium dioxide preparation,and structure characterization of nano-scale Titanium dioxide was carried out by X-Ray diffractometer.Oxford cup method was used to explore inhibition effect of nano-scale Titanium dioxide suspension on the activity of normal parasitic bacterium of Nanfeng Citrus.Simultaneously,the empirical preservation test was carried out.[Result] The average diameter of nano-scale Titanium dioxide powder attained to 14.6 nm,actual average yield could reach 90.83% with RSD（Relative Standard Deviation）of 0.86%.[Conclusion] Nano-scale Titanium dioxide had good antibacterial effect on the parasitic bacterium of Nanfeng Citrus in storage period.
基金Funded by the National Natural Science Foundation of China(No.51905215)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCX23_1233)+1 种基金Major Scientific and Technological Innovation Project of Shandong Province of China(No.2019JZZY020111)the National College Students Innovation and Entrepreneurship Training Program of China(No.CX2022415)。
文摘To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.
基金The National Natural Science Foundation of China(No.61774014)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYZZ15_0331)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.19KJB510060)
文摘With the device size gradually approaching the physical limit, the small changes of the Si(001)/SiO 2 interface in silicon-based devices may have a great impact on the device characteristics. Based on this, the bridge-oxygen model is used to construct the interface of different sizes, and the finite size effect of the interface between fine electronic structure silicon and silicon dioxide is studied. Then, the influence of the finite size effect on the electrical properties of nanotransistors is calculated by using the first principle. Theoretical calculation results demonstrate that the bond length of Si-Si and Si-O shows a saturate tendency when the size increases, while the absorption capacity of visible light and the barrier of the interface increase with the decrease of size. Finally, the results of two tunneling current models show that the finite size effect of Si(001)/SiO 2 interface can lead to a larger change in the gate leakage current of nano-scale devices, and the transition region and image potential, which play an important role in the calculation of interface characteristics of large-scale devices, show different sensitivities to the finite size effect. Therefore, the finite size effect of the interface on the gate leakage current cannot be ignored in nano-scale devices.
