Biodegradable starch/poly （vinyl alcohol）/nano-titanium dioxide （ST/PVA/nano-Ti02） nanocomposite films were prepared via a solution casting method. Their biodegradability, mechanical properties, and thermal proper...Biodegradable starch/poly （vinyl alcohol）/nano-titanium dioxide （ST/PVA/nano-Ti02） nanocomposite films were prepared via a solution casting method. Their biodegradability, mechanical properties, and thermal properties were also studied in this paper. A general full factorial experimental approach was used to determine effective parameters on the mechanical properties of the prepared films. ST/PVA/TiO2 nanocomposites were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results of mechanical analysis show that ST/PVA films with higher contents of PVA have much better mechanical properties. In thermal analysis, it is found that the addition of Ti02 nanoparticles improves the thermal stability of the films. SEM micrographs, taken from the fracture surface of samples, illustrate that the addition of PVA makes the film softer and more flexible. The results of soil burial biodegradation indicate that the biodegradability of ST/PVA/TiO2 films strongly depends on the starch proportion in the film matrix. The degradation rate is increased by the addition of starch in the films.展开更多
This paper reports that the thermochromic vanadium dioxide films were deposited on various transparent substrates by radio frequency magnetron sputtering, and then aged under circumstance for years. Samples were chara...This paper reports that the thermochromic vanadium dioxide films were deposited on various transparent substrates by radio frequency magnetron sputtering, and then aged under circumstance for years. Samples were characterized with several different techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, and Raman, when they were fresh from sputter chamber and aged after years, respectively, in order to determine their structure and composition. It finds that a small amount of sodium occurred on the surface of vanadium dioxide films, which was probably due to sodium ion diffusion from soda-lime glass when sputtering was performed at high substrate temperature. It also finds that aging for years significantly affected the nonstoichiometry of vanadium dioxide films, thus inducing much change in Raman modes.展开更多
Silicon dioxide （SiO2） films were prepared on sapphire （α-Al2O3） by radio frequency magnetron reactive sputtering in order to increase both transmission and rain erosion resistant performance of infrared domes of...Silicon dioxide （SiO2） films were prepared on sapphire （α-Al2O3） by radio frequency magnetron reactive sputtering in order to increase both transmission and rain erosion resistant performance of infrared domes of sapphire. Composition and structure of SiO2 films were analyzed by X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The transmittance of uncoated and coated sapphire was measured using a Fourier transform infrared （FTIR） spectrometer. Rain erosion tests of the uncoated and coated sapphire were performed at 211 m/s impact velocity with an exposure time ranging from 1 to 8 min on a whirling arm rig. Results show that the deposited films can greatly increase the transmission of sapphire in mid-wave IR. After rain erosion test, decreases in normalized transmission were less than 1% for designed SiO2 films and the SiO2 coating was strongly bonded to the sapphire substrate. In addition, sapphires coated with SiO2 films had a higher transmittance than uncoated ones after rain erosion.展开更多
Cerium dioxide, CeO2, is a potentially superior material in a myriad of areas, and many methods have been proposed to deposit single crystal CeO2 thin films. A novel fabrication technique utilizing dual plasma generat...Cerium dioxide, CeO2, is a potentially superior material in a myriad of areas, and many methods have been proposed to deposit single crystal CeO2 thin films. A novel fabrication technique utilizing dual plasma generated by metal vacuum arc (MEVVA) and radio frequency (RF) is discussed in this paper. We have recently conducted a systematic investigation to determine the optimal process window to deposit CeO2 thin films'on Si(100) substrates. The X-ray diffraction results show the existence of CeO2(100) in the as-deposited sample.展开更多
Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffracti...Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）. TiO2 films deposited under atmosphere pressure show preferred orientation, and exhibit columnar-like structure, while TiO2 films deposited under low gas pressure show no preferred orientation. The columnar-like structure with preferred orientation exhibits higher photocatalytic efficiency, since the columnar structure has larger surface area. However, it contributes little to the improvement of hydrophilicity. DBD-CVD is an alternative method to prepare photocatalytic TiO2 for its well-controllable property.展开更多
Vanadium dioxide(VO_(2))is a strongly correlated material,and it has become known due to its sharp metal-insulator transition(MIT)near room temperature.Understanding the thermal properties and their change across MIT ...Vanadium dioxide(VO_(2))is a strongly correlated material,and it has become known due to its sharp metal-insulator transition(MIT)near room temperature.Understanding the thermal properties and their change across MIT of VO_(2)thin film is important for the applications of this material in various devices.Here,the changes in thermal conductivity of epitaxial and polycrystalline VO_(2)thin film across MIT are probed by the time-domain thermoreflectance(TDTR)method.The measurements are performed in a direct way devoid of deposition of any metal thermoreflectance layer on the VO_(2)film to attenuate the impact from extra thermal interfaces.It is demonstrated that the method is feasible for the VO_(2)films with thickness values larger than 100 nm and beyond the phase transition region.The observed reasonable thermal conductivity change rates across MIT of VO_(2)thin films with different crystal qualities are found to be correlated with the electrical conductivity change rate,which is different from the reported behavior of single crystal VO_(2)nanowires.The recovery of the relationship between thermal conductivity and electrical conductivity in VO_(2)film may be attributed to the increasing elastic electron scattering weight,caused by the defects in the film.This work demonstrates the possibility and limitation of investigating the thermal properties of VO_(2)thin films by the TDTR method without depositing any metal thermoreflectance layer.展开更多
We report a new and simple preparation method of the visible light responsive Titanium dioxide (TiO2) photocatalytic films using sol-gel method and ultraviolet light (UV) irradiation. Proposed films were prepared on f...We report a new and simple preparation method of the visible light responsive Titanium dioxide (TiO2) photocatalytic films using sol-gel method and ultraviolet light (UV) irradiation. Proposed films were prepared on fused silica plates using titanium tetra-isopropoxide, urea, 2-methoxyethanol, water and UV irradiation. The 650°C-annealed films were carbon-containing anatase type TiO2, not carbon-doped ones. The prepared films absorbed visible light with wavelengths longer than 400 nm. Also, organic dyes were effectively photodegradated by visible light irradiation in the presence of these films.展开更多
The preparation of a new mineral composite material, calcium carbonate particles coated with titanium dioxide, was studied. The mechanism of the preparation process was proposed. The new mineral composite material was...The preparation of a new mineral composite material, calcium carbonate particles coated with titanium dioxide, was studied. The mechanism of the preparation process was proposed. The new mineral composite material was made by the mechanoehemieal method under the optimum condition that the mass ratio of calcium carbonate particles to titanium dioxide was 6.5：3.5. The mass ratios of two different types of titanium dioxide （anatase to rutile） and grinding media to grinded materials were 8：2 and 4：1 respectively, and the modified density was 60%. Under this condition, the new material was capable of forming after 120-min modification. The hiding power and oil absorption of this new material were 29.12 g/m^2 and 23.30%, respectively. The results show that the modification is based on surface hydroxylation. After coating with titanium dioxide, the hiding power of calcium carbonate can be improved greatly. The new mineral composite materials can be used as the substitute for titanium dioxide.展开更多
It is known that injection of carbon dioxide into the petroleum reservoir(CO_(2) flooding) is one of the effective methods for enhanced oil recovery. CO_(2) flooding may be complicated by formation of CO_(2) hydrate p...It is known that injection of carbon dioxide into the petroleum reservoir(CO_(2) flooding) is one of the effective methods for enhanced oil recovery. CO_(2) flooding may be complicated by formation of CO_(2) hydrate plugs. It makes topical investigation of CO_(2) hydrate formation in the system gaseous CO_(2)-oil-water. In this work, the growth rates of carbon dioxide hydrate films at the water-oil as well as the water-gas interface are studied in the pressure range of 2.30-3.04 MPa and at temperatures between -5.4 and 5.0℃. It is found that the growth rate for the water-oil interface is 3.5 times lower than that for the water-gas interface with carbon dioxide. It is hypothesised that the observed decrease in the growth rate is related to the mechanical resistance of the oil components adsorbed on the interface to the growth of the hydrate film. The growth rate of the film has been shown to depend on the experimental procedure,most likely due to the different initial concentrations of carbon dioxide in the aqueous solutions.展开更多
Ti O2-organic multilayered nanocomposite films were deposited on a self-assembled monolayer-coated silicon substrate based on layer-by-layer technique and chemical bath deposition method by a hydrolysis of Ti Cl4 in a...Ti O2-organic multilayered nanocomposite films were deposited on a self-assembled monolayer-coated silicon substrate based on layer-by-layer technique and chemical bath deposition method by a hydrolysis of Ti Cl4 in an acid aqueous solution. The chemical compositions, surface morphologies and mechanical properties of the films were investigated by X-ray photoelectron spectrometer(XPS), scanning electron microscopy(SEM) and nanoindentation depth-sensing technique, respectively. The results indicate that the major chemical compositions of the films are Ti and O. The principal mechanism for the nucleation and growth of the films is homogeneous nucleation, and the layer number of films has great influence on the surface morphology and roughness of the films. In addition, mechanical nanoindentation testing presents a significant increase in hardness and fracture toughness of titanium dioxide multilayered films compared with single-layer titanium dioxide thin film.展开更多
Anodic oxide films of the titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate electrolyte without hydrofluoric acid or fluoride were fabricated. The morphology, components, and microstructure of the films were characte...Anodic oxide films of the titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate electrolyte without hydrofluoric acid or fluoride were fabricated. The morphology, components, and microstructure of the films were characterized by scanning electron microscopy （SEM）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, and Raman spectroscopy. The results showed that the films were thick, uniform, and nontransparent. Such films exhibited sedimentary morphology, with a thickness of about 3 μm, and the pore diameters of the deposits ranged from several hundred nanometers to 1.5 μm. The films were mainly titanium dioxide. Some coke-like deposits, which may contain or be changed by OH, NH, C-C, C-O, and C=O groups, were doped in the films. The films were mainly amorphous with a small amount of anatase and rutile phase.展开更多
基金financial support by Iran Nanotechnology Initiative Council
文摘Biodegradable starch/poly （vinyl alcohol）/nano-titanium dioxide （ST/PVA/nano-Ti02） nanocomposite films were prepared via a solution casting method. Their biodegradability, mechanical properties, and thermal properties were also studied in this paper. A general full factorial experimental approach was used to determine effective parameters on the mechanical properties of the prepared films. ST/PVA/TiO2 nanocomposites were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results of mechanical analysis show that ST/PVA films with higher contents of PVA have much better mechanical properties. In thermal analysis, it is found that the addition of Ti02 nanoparticles improves the thermal stability of the films. SEM micrographs, taken from the fracture surface of samples, illustrate that the addition of PVA makes the film softer and more flexible. The results of soil burial biodegradation indicate that the biodegradability of ST/PVA/TiO2 films strongly depends on the starch proportion in the film matrix. The degradation rate is increased by the addition of starch in the films.
基金supported by the National Natural Science Foundation of China (Grant No 60776039)China Agricultural University Foundation (Grant No 2007037)
文摘This paper reports that the thermochromic vanadium dioxide films were deposited on various transparent substrates by radio frequency magnetron sputtering, and then aged under circumstance for years. Samples were characterized with several different techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, and Raman, when they were fresh from sputter chamber and aged after years, respectively, in order to determine their structure and composition. It finds that a small amount of sodium occurred on the surface of vanadium dioxide films, which was probably due to sodium ion diffusion from soda-lime glass when sputtering was performed at high substrate temperature. It also finds that aging for years significantly affected the nonstoichiometry of vanadium dioxide films, thus inducing much change in Raman modes.
文摘Silicon dioxide （SiO2） films were prepared on sapphire （α-Al2O3） by radio frequency magnetron reactive sputtering in order to increase both transmission and rain erosion resistant performance of infrared domes of sapphire. Composition and structure of SiO2 films were analyzed by X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The transmittance of uncoated and coated sapphire was measured using a Fourier transform infrared （FTIR） spectrometer. Rain erosion tests of the uncoated and coated sapphire were performed at 211 m/s impact velocity with an exposure time ranging from 1 to 8 min on a whirling arm rig. Results show that the deposited films can greatly increase the transmission of sapphire in mid-wave IR. After rain erosion test, decreases in normalized transmission were less than 1% for designed SiO2 films and the SiO2 coating was strongly bonded to the sapphire substrate. In addition, sapphires coated with SiO2 films had a higher transmittance than uncoated ones after rain erosion.
基金The work was supported by Hong Kong RGC CERG9040344 and 9040412, RGC / Germany Joint Schemes9050084 and 9050150, and CityU S
文摘Cerium dioxide, CeO2, is a potentially superior material in a myriad of areas, and many methods have been proposed to deposit single crystal CeO2 thin films. A novel fabrication technique utilizing dual plasma generated by metal vacuum arc (MEVVA) and radio frequency (RF) is discussed in this paper. We have recently conducted a systematic investigation to determine the optimal process window to deposit CeO2 thin films'on Si(100) substrates. The X-ray diffraction results show the existence of CeO2(100) in the as-deposited sample.
文摘Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）. TiO2 films deposited under atmosphere pressure show preferred orientation, and exhibit columnar-like structure, while TiO2 films deposited under low gas pressure show no preferred orientation. The columnar-like structure with preferred orientation exhibits higher photocatalytic efficiency, since the columnar structure has larger surface area. However, it contributes little to the improvement of hydrophilicity. DBD-CVD is an alternative method to prepare photocatalytic TiO2 for its well-controllable property.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61825102,51872038,and 52021001)the“111”Project,China(Grant No.B18011).
文摘Vanadium dioxide(VO_(2))is a strongly correlated material,and it has become known due to its sharp metal-insulator transition(MIT)near room temperature.Understanding the thermal properties and their change across MIT of VO_(2)thin film is important for the applications of this material in various devices.Here,the changes in thermal conductivity of epitaxial and polycrystalline VO_(2)thin film across MIT are probed by the time-domain thermoreflectance(TDTR)method.The measurements are performed in a direct way devoid of deposition of any metal thermoreflectance layer on the VO_(2)film to attenuate the impact from extra thermal interfaces.It is demonstrated that the method is feasible for the VO_(2)films with thickness values larger than 100 nm and beyond the phase transition region.The observed reasonable thermal conductivity change rates across MIT of VO_(2)thin films with different crystal qualities are found to be correlated with the electrical conductivity change rate,which is different from the reported behavior of single crystal VO_(2)nanowires.The recovery of the relationship between thermal conductivity and electrical conductivity in VO_(2)film may be attributed to the increasing elastic electron scattering weight,caused by the defects in the film.This work demonstrates the possibility and limitation of investigating the thermal properties of VO_(2)thin films by the TDTR method without depositing any metal thermoreflectance layer.
文摘We report a new and simple preparation method of the visible light responsive Titanium dioxide (TiO2) photocatalytic films using sol-gel method and ultraviolet light (UV) irradiation. Proposed films were prepared on fused silica plates using titanium tetra-isopropoxide, urea, 2-methoxyethanol, water and UV irradiation. The 650°C-annealed films were carbon-containing anatase type TiO2, not carbon-doped ones. The prepared films absorbed visible light with wavelengths longer than 400 nm. Also, organic dyes were effectively photodegradated by visible light irradiation in the presence of these films.
文摘The preparation of a new mineral composite material, calcium carbonate particles coated with titanium dioxide, was studied. The mechanism of the preparation process was proposed. The new mineral composite material was made by the mechanoehemieal method under the optimum condition that the mass ratio of calcium carbonate particles to titanium dioxide was 6.5：3.5. The mass ratios of two different types of titanium dioxide （anatase to rutile） and grinding media to grinded materials were 8：2 and 4：1 respectively, and the modified density was 60%. Under this condition, the new material was capable of forming after 120-min modification. The hiding power and oil absorption of this new material were 29.12 g/m^2 and 23.30%, respectively. The results show that the modification is based on surface hydroxylation. After coating with titanium dioxide, the hiding power of calcium carbonate can be improved greatly. The new mineral composite materials can be used as the substitute for titanium dioxide.
基金supported by a grant from the Ministry of Science and Higher Education of Russia, Agreement No. 075-152020-806 (Contract No. 13.1902.21.0014)。
文摘It is known that injection of carbon dioxide into the petroleum reservoir(CO_(2) flooding) is one of the effective methods for enhanced oil recovery. CO_(2) flooding may be complicated by formation of CO_(2) hydrate plugs. It makes topical investigation of CO_(2) hydrate formation in the system gaseous CO_(2)-oil-water. In this work, the growth rates of carbon dioxide hydrate films at the water-oil as well as the water-gas interface are studied in the pressure range of 2.30-3.04 MPa and at temperatures between -5.4 and 5.0℃. It is found that the growth rate for the water-oil interface is 3.5 times lower than that for the water-gas interface with carbon dioxide. It is hypothesised that the observed decrease in the growth rate is related to the mechanical resistance of the oil components adsorbed on the interface to the growth of the hydrate film. The growth rate of the film has been shown to depend on the experimental procedure,most likely due to the different initial concentrations of carbon dioxide in the aqueous solutions.
基金Projects(51204036,51234009)supported by the National Natural Science Foundation of ChinaProject(2014CB643405)supported by the National Basic Research Program of China
文摘Ti O2-organic multilayered nanocomposite films were deposited on a self-assembled monolayer-coated silicon substrate based on layer-by-layer technique and chemical bath deposition method by a hydrolysis of Ti Cl4 in an acid aqueous solution. The chemical compositions, surface morphologies and mechanical properties of the films were investigated by X-ray photoelectron spectrometer(XPS), scanning electron microscopy(SEM) and nanoindentation depth-sensing technique, respectively. The results indicate that the major chemical compositions of the films are Ti and O. The principal mechanism for the nucleation and growth of the films is homogeneous nucleation, and the layer number of films has great influence on the surface morphology and roughness of the films. In addition, mechanical nanoindentation testing presents a significant increase in hardness and fracture toughness of titanium dioxide multilayered films compared with single-layer titanium dioxide thin film.
文摘Anodic oxide films of the titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate electrolyte without hydrofluoric acid or fluoride were fabricated. The morphology, components, and microstructure of the films were characterized by scanning electron microscopy （SEM）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, and Raman spectroscopy. The results showed that the films were thick, uniform, and nontransparent. Such films exhibited sedimentary morphology, with a thickness of about 3 μm, and the pore diameters of the deposits ranged from several hundred nanometers to 1.5 μm. The films were mainly titanium dioxide. Some coke-like deposits, which may contain or be changed by OH, NH, C-C, C-O, and C=O groups, were doped in the films. The films were mainly amorphous with a small amount of anatase and rutile phase.
