Highly ordered and porous anodic aluminum oxide templates were prepared. The ordered copper nanowires arrays were assembled in nano-holes of the template by alternating current electrodeposition at lover voltage. The ...Highly ordered and porous anodic aluminum oxide templates were prepared. The ordered copper nanowires arrays were assembled in nano-holes of the template by alternating current electrodeposition at lover voltage. The morphologies of template and copper nano-wires arrays were characterized by means of field emission scanning electron microscope (FESEM) and the crystal structure of copper nano-wires was determined by means of X-ray diffraction. The results indicate that copper nano-wires hold the preferred crystalline orientation along (111), (200), (220) and (331) crystal faces during growth, and the growth of copper nano-wires in the nano-holes of the template is homogenous and continuous.展开更多
We present a self-assembly method to prepare array nano-wires of colloidal CdSe quantum dots on a substrate of porous Al2 O3 film modified by gold nanoparticles. The photoluminescence(PL) spectra of nanowires are in s...We present a self-assembly method to prepare array nano-wires of colloidal CdSe quantum dots on a substrate of porous Al2 O3 film modified by gold nanoparticles. The photoluminescence(PL) spectra of nanowires are in situ measured by using a scanning near-field optical microscopy(SNOM) probe tip with 100-nm aperture on the scanning near-field optical microscope. The results show that the binding sites from the edge of porous Al2 O3 nanopores are combined with the carboxyl of CdSe quantum dots’ surface to form an array of CdSe nanowires in the process of losing background solvent because of the gold nanoparticles filling the nano-holes of porous Al2 O3 film. Compared with the area of nonself-assembled nano-wire, the fluorescence on the Al2 O3/Au/CdSe interface is significantly enhanced in the self-assembly nano-wire regions due to the electron transfer conductor effect of the gold nanoparticles’ surface. In addition, its full width at half maximum(FWHM) is also obviously widened. The method of enhancing fluorescence and energy transfer can widely be applied to photodetector, photocatalysis, optical display, optical sensing, and biomedical imaging, and so on.展开更多
LiMn2O4 nano-wires with ideal size distribution were readily synthesized by flux method. Samples prepared conventionally were used as the comparison references to investigate the effect of flux. The structural, morpho...LiMn2O4 nano-wires with ideal size distribution were readily synthesized by flux method. Samples prepared conventionally were used as the comparison references to investigate the effect of flux. The structural, morphological and electrochemical properties of nano-sized materials were examined by powder X-ray diffraction（XRD） analysis, scanning electron microscopy（SEM） and charge-discharge cycling analysis. Results from galvanostatic charge-discharge analysis show that the samples prepared at 700 ℃ via flux method（FM-700） afford the highest initial discharge capacity of 125.5 mA·h/g between 3.0 to 4.3 V at a rate of 0.2 C. After 50 cycles, a cycling retention of 89.6% is evident. Overall, the LiMn2O4 nano-wires developed in this work seem to be promising cathode materials for lithium ion batteries suitable to different energy-saving settings.展开更多
文摘Highly ordered and porous anodic aluminum oxide templates were prepared. The ordered copper nanowires arrays were assembled in nano-holes of the template by alternating current electrodeposition at lover voltage. The morphologies of template and copper nano-wires arrays were characterized by means of field emission scanning electron microscope (FESEM) and the crystal structure of copper nano-wires was determined by means of X-ray diffraction. The results indicate that copper nano-wires hold the preferred crystalline orientation along (111), (200), (220) and (331) crystal faces during growth, and the growth of copper nano-wires in the nano-holes of the template is homogenous and continuous.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61741505 and 61865002)the Guizhou Provincial Science and Technology Support Plan,China(Grant No QKHZ [2017]2887)+3 种基金the Guiding Local Science and Technology Development Plan of the Central Government of China(Grant No.QKZYD [2017]4004)the Guizhou Province Education and Teaching Reform for Graduate Student(Grant No.QJYH-JG [2016]15)the Guizhou University Introduces Talent Projects,China(Grant No.2016002)the Talents of Guizhou Municipal Science and Technology Cooperation Platform,China(Grant No.[2018]5781)
文摘We present a self-assembly method to prepare array nano-wires of colloidal CdSe quantum dots on a substrate of porous Al2 O3 film modified by gold nanoparticles. The photoluminescence(PL) spectra of nanowires are in situ measured by using a scanning near-field optical microscopy(SNOM) probe tip with 100-nm aperture on the scanning near-field optical microscope. The results show that the binding sites from the edge of porous Al2 O3 nanopores are combined with the carboxyl of CdSe quantum dots’ surface to form an array of CdSe nanowires in the process of losing background solvent because of the gold nanoparticles filling the nano-holes of porous Al2 O3 film. Compared with the area of nonself-assembled nano-wire, the fluorescence on the Al2 O3/Au/CdSe interface is significantly enhanced in the self-assembly nano-wire regions due to the electron transfer conductor effect of the gold nanoparticles’ surface. In addition, its full width at half maximum(FWHM) is also obviously widened. The method of enhancing fluorescence and energy transfer can widely be applied to photodetector, photocatalysis, optical display, optical sensing, and biomedical imaging, and so on.
基金Supported by the National Natural Science Foundation of China（Nos.21301066, 21271082）.
文摘LiMn2O4 nano-wires with ideal size distribution were readily synthesized by flux method. Samples prepared conventionally were used as the comparison references to investigate the effect of flux. The structural, morphological and electrochemical properties of nano-sized materials were examined by powder X-ray diffraction（XRD） analysis, scanning electron microscopy（SEM） and charge-discharge cycling analysis. Results from galvanostatic charge-discharge analysis show that the samples prepared at 700 ℃ via flux method（FM-700） afford the highest initial discharge capacity of 125.5 mA·h/g between 3.0 to 4.3 V at a rate of 0.2 C. After 50 cycles, a cycling retention of 89.6% is evident. Overall, the LiMn2O4 nano-wires developed in this work seem to be promising cathode materials for lithium ion batteries suitable to different energy-saving settings.
