A novel scaffold containing collagen-I/polylactic acid（PLA）/nanohydroxyapatite（nHA） was prepared via co-electrospinning method. Different target substrates were used to improve the collection efficiency of this sc...A novel scaffold containing collagen-I/polylactic acid（PLA）/nanohydroxyapatite（nHA） was prepared via co-electrospinning method. Different target substrates were used to improve the collection efficiency of this scaffold. The properties of the novel scaffold were compared with those of conventionally prepared ones. Compared to con- ventional method, the modified method was more efficient in producing the scaffold. Moreover, the porosity, thickness, and morphology of the novel scaffold were better than those of scaffolds prepared by conventional methods. The properties of collagen-I, collagen-I/PLA and collagen-I/PLA/nHA scaffolds were also compared. Diameters of the electrospun fibers ranged from 180 to 405 nm, and roughness was present on the surface of the fibers due to the deposition of crystals of nHA along the long axis of the fibers. The fibers of the collagen-I/PLA/nHA scaffold and the fibers of natural bone tissue had similar structure.展开更多
Titaninm-nanohydroxyapatite （Ti-nHA） composite powders, composed of titanium with 10 vol.% and 20 vol.% of nano-hydroxyapatite, were milled in a planetary ball mill using alcohol media to avoid excessive heat. XRD a...Titaninm-nanohydroxyapatite （Ti-nHA） composite powders, composed of titanium with 10 vol.% and 20 vol.% of nano-hydroxyapatite, were milled in a planetary ball mill using alcohol media to avoid excessive heat. XRD and SEM were performed for characterization of the microstructure, and the homogeneity of Ti/HA nanocomposite powder was evaluated by EPMA with prolonged ball milling time. The results show that under the condition of wet milling, the grain size of Ti-nHA composite powders is decreased with the increase in ball milling time and the amount of the addition of nHA. While for milling of 30 h, the nanocomposite powder with free structure, which consists of the nano-hydroxyapatite （nHA） particles and titanium （Ti） phase, is obtained. Three stages of milling can be observed from the dement mapping of Ti, Ca, and P by EPMA; meanwhile, it is found that the nHA would be more homogenously distributed after milling for 30 h.展开更多
Titanium and its alloys are commonly used as dental and bone implant materials.Biomimetic coating of titanium surfaces could improve their osteoinductive properties.In this work,we have developed a novel osteogenic co...Titanium and its alloys are commonly used as dental and bone implant materials.Biomimetic coating of titanium surfaces could improve their osteoinductive properties.In this work,we have developed a novel osteogenic composite nanocoating for titanium surfaces,which provides a natural environment for facilitating adhesion,proliferation,and osteogenic differentiation of bone marrow mesenchymal stem cells(MSCs).Electrospinning was used to produce composite nanofiber coatings based on polycaprolactone(PCL),nano-hydroxyapatite(nHAp)and strontium ranelate(SrRan).Thus,four types of coatings,i.e.,PCL,PCL/nHAp,PCL/SrRan,and PCL/nHAp/SrRan,were applied on titanium surfaces.To assess chemical,morphological and biological properties of the developed coatings,EDS,FTIR,XRD,XRF,SEM,AFM,in-vitro cytotoxicity and in-vitro hemocompatibility analyses were performed.Our findings have revealed that the composite nanocoatings were both cytocompatible and hemocompatible;thus PCL/HAp/SrRan composite nanofiber coating led to the highest cell viability.Osteogenic culture of MSCs on the nanocoatings led to the osteogenic differentiation of stem cells,confirmed by alkaline phosphatase activity and mineralization measurements.The findings support the notion that the proposed composite nanocoatings have the potential to promote new bone formation and enhance bone-implant integration.展开更多
The nanohydroxyapatites (HAP) and its biological effects have been studied using ultraviolet absorption spectrum, X-ray diffraction (XRD) structure analysis, fluorescent and infrared spectrum of absorption and MTT met...The nanohydroxyapatites (HAP) and its biological effects have been studied using ultraviolet absorption spectrum, X-ray diffraction (XRD) structure analysis, fluorescent and infrared spectrum of absorption and MTT method. The nanohyd- roxyapatites are prepared and made by using Sol-gel method, in which the parameters of process and reaction are controlled as: PH 】9, Ca/P = 1.67, sintering temperature of 1100?C and sintering time 2 hours. The results of the study show that nanohydroxyapatites can absorb the amino acid molecules, the absorption is better for stronger acidity of amino acids. We also find that the nanohydroxyapatites and complex of nanoHAP+ nanoCrO2 can all restrain the proliferation of cells, but their toxiciteis are all first degree or minor, but the restrained effect of the latter is smaller than that of the former, although they can decrease the relative proliferation rate of cells. The nanohydroxyapatites can also change the molecular structure of human serum albumin.展开更多
用人工合成的纳米羟基磷灰石吸附溶液中的金属离子Zn2+,考察吸附时间、pH值及Zn2+初始离子浓度等因素对吸附效果的影响,探讨吸附机理。结果表明:纳米羟基磷灰石对Zn2+的吸附符合拟二级反应动力学方程,吸附时间60 m in即可达到平衡;吸附...用人工合成的纳米羟基磷灰石吸附溶液中的金属离子Zn2+,考察吸附时间、pH值及Zn2+初始离子浓度等因素对吸附效果的影响,探讨吸附机理。结果表明:纳米羟基磷灰石对Zn2+的吸附符合拟二级反应动力学方程,吸附时间60 m in即可达到平衡;吸附量与pH值和Zn2+的初始浓度呈正相关关系;纳米羟基磷灰石对Zn2+的吸附属Langmu ir等温吸附类型。展开更多
基金Supported by the Scientific and Technological Developing Scheme of Jilin Province,China(No.20080302)the Fund of Jilin Provincial Science and Technology Department,China(No.200705115)
文摘A novel scaffold containing collagen-I/polylactic acid（PLA）/nanohydroxyapatite（nHA） was prepared via co-electrospinning method. Different target substrates were used to improve the collection efficiency of this scaffold. The properties of the novel scaffold were compared with those of conventionally prepared ones. Compared to con- ventional method, the modified method was more efficient in producing the scaffold. Moreover, the porosity, thickness, and morphology of the novel scaffold were better than those of scaffolds prepared by conventional methods. The properties of collagen-I, collagen-I/PLA and collagen-I/PLA/nHA scaffolds were also compared. Diameters of the electrospun fibers ranged from 180 to 405 nm, and roughness was present on the surface of the fibers due to the deposition of crystals of nHA along the long axis of the fibers. The fibers of the collagen-I/PLA/nHA scaffold and the fibers of natural bone tissue had similar structure.
基金This work was financially supported by the Science and Technology Key Project of Guangdong Province, China (No.2006B35801001)
文摘Titaninm-nanohydroxyapatite （Ti-nHA） composite powders, composed of titanium with 10 vol.% and 20 vol.% of nano-hydroxyapatite, were milled in a planetary ball mill using alcohol media to avoid excessive heat. XRD and SEM were performed for characterization of the microstructure, and the homogeneity of Ti/HA nanocomposite powder was evaluated by EPMA with prolonged ball milling time. The results show that under the condition of wet milling, the grain size of Ti-nHA composite powders is decreased with the increase in ball milling time and the amount of the addition of nHA. While for milling of 30 h, the nanocomposite powder with free structure, which consists of the nano-hydroxyapatite （nHA） particles and titanium （Ti） phase, is obtained. Three stages of milling can be observed from the dement mapping of Ti, Ca, and P by EPMA; meanwhile, it is found that the nHA would be more homogenously distributed after milling for 30 h.
文摘Titanium and its alloys are commonly used as dental and bone implant materials.Biomimetic coating of titanium surfaces could improve their osteoinductive properties.In this work,we have developed a novel osteogenic composite nanocoating for titanium surfaces,which provides a natural environment for facilitating adhesion,proliferation,and osteogenic differentiation of bone marrow mesenchymal stem cells(MSCs).Electrospinning was used to produce composite nanofiber coatings based on polycaprolactone(PCL),nano-hydroxyapatite(nHAp)and strontium ranelate(SrRan).Thus,four types of coatings,i.e.,PCL,PCL/nHAp,PCL/SrRan,and PCL/nHAp/SrRan,were applied on titanium surfaces.To assess chemical,morphological and biological properties of the developed coatings,EDS,FTIR,XRD,XRF,SEM,AFM,in-vitro cytotoxicity and in-vitro hemocompatibility analyses were performed.Our findings have revealed that the composite nanocoatings were both cytocompatible and hemocompatible;thus PCL/HAp/SrRan composite nanofiber coating led to the highest cell viability.Osteogenic culture of MSCs on the nanocoatings led to the osteogenic differentiation of stem cells,confirmed by alkaline phosphatase activity and mineralization measurements.The findings support the notion that the proposed composite nanocoatings have the potential to promote new bone formation and enhance bone-implant integration.
文摘The nanohydroxyapatites (HAP) and its biological effects have been studied using ultraviolet absorption spectrum, X-ray diffraction (XRD) structure analysis, fluorescent and infrared spectrum of absorption and MTT method. The nanohyd- roxyapatites are prepared and made by using Sol-gel method, in which the parameters of process and reaction are controlled as: PH 】9, Ca/P = 1.67, sintering temperature of 1100?C and sintering time 2 hours. The results of the study show that nanohydroxyapatites can absorb the amino acid molecules, the absorption is better for stronger acidity of amino acids. We also find that the nanohydroxyapatites and complex of nanoHAP+ nanoCrO2 can all restrain the proliferation of cells, but their toxiciteis are all first degree or minor, but the restrained effect of the latter is smaller than that of the former, although they can decrease the relative proliferation rate of cells. The nanohydroxyapatites can also change the molecular structure of human serum albumin.
文摘用人工合成的纳米羟基磷灰石吸附溶液中的金属离子Zn2+,考察吸附时间、pH值及Zn2+初始离子浓度等因素对吸附效果的影响,探讨吸附机理。结果表明:纳米羟基磷灰石对Zn2+的吸附符合拟二级反应动力学方程,吸附时间60 m in即可达到平衡;吸附量与pH值和Zn2+的初始浓度呈正相关关系;纳米羟基磷灰石对Zn2+的吸附属Langmu ir等温吸附类型。
