To improve the properties of low-carbonization of MgO–C refractories,the introduction of composite additives is an effective strategy.Al_(2)O_(3)–SiC composite powder was prepared from clay using electromagnetic ind...To improve the properties of low-carbonization of MgO–C refractories,the introduction of composite additives is an effective strategy.Al_(2)O_(3)–SiC composite powder was prepared from clay using electromagnetic induction heating and carbon embedded methods.Further,the Al_(2)O_(3)–SiC composite powder synthesized by electromagnetic induction heating at 600 A was added into low-carbon MgO–C refractories(4 wt.%)to improve their properties.The results showed that when the addition amount of Al_(2)O_(3)–SiC composite powder is within the range of 2.5–5.0 wt.%,the properties of low-carbon MgO–C samples were significantly improved,e.g.,the apparent porosity of 7.58%–8.04%,the bulk density of 2.98–2.99 g cm-3,the cold compressive strength of 55.72–57.93 MPa,the residual strength after three air quenching at 1100°C of 74.86%–78.04%,and the decarburized layer depth after oxidized at 1400°C for 2 h of 14.03–14.87 mm.Consequently,the idea for the rapid synthesis of Al_(2)O_(3)–SiC composite powder provides an alternative low-carbon MgO–C refractories performance optimization strategy.展开更多
ZrB_(2)-Al_(2)O_(3)composite powders were synthesized at 1100℃using a novel ZrB_(2)precursor and Al powders as raw materials.The final ZrB_(2)-Al_(2)O_(3)composite powders consisted of submicron Al_(2)O_(3)and nanosi...ZrB_(2)-Al_(2)O_(3)composite powders were synthesized at 1100℃using a novel ZrB_(2)precursor and Al powders as raw materials.The final ZrB_(2)-Al_(2)O_(3)composite powders consisted of submicron Al_(2)O_(3)and nanosize ZrB_(2)(50-100 nm)particles,which were homogeneously mixed in microscale.Combined with thermodynamic calculation and experiment results,the formation mechanism of ZrB_(2)-Al_(2)O_(3)composite powders was proposed as follows:ZrB_(2)precursor first decomposed into ZrO_(2)and amorphousB2O3.Aluminothermic reduction of ZrO_(2) and B_(2)O_(3) generated Zr and B atoms and the coproducts Al_(2)O_(3),and then,a series of reactions between Zr atoms,B atoms and Al took place to form ZrB_(2)and Al_(3)Zr.Then,ZrB_(2),Al_(2)O_(3)and Al were obtained through a liquid-solid reaction between Al_(3)Zr andB2O3,which is the limiting step in the conversion process.When the Al_(3)Zr was exhausted,the reaction between Al,ZrO_(2)and B became the main reaction to obtain ZrB_(2)and Al_(2)O_(3).展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.U20A20239 and U1908227)the Fundamental Research Funds for the Central Universities(Grant No.N2125002)the open research fund for State Key Laboratory of Advance Refractories(Grant No.SKLAR202001).
文摘To improve the properties of low-carbonization of MgO–C refractories,the introduction of composite additives is an effective strategy.Al_(2)O_(3)–SiC composite powder was prepared from clay using electromagnetic induction heating and carbon embedded methods.Further,the Al_(2)O_(3)–SiC composite powder synthesized by electromagnetic induction heating at 600 A was added into low-carbon MgO–C refractories(4 wt.%)to improve their properties.The results showed that when the addition amount of Al_(2)O_(3)–SiC composite powder is within the range of 2.5–5.0 wt.%,the properties of low-carbon MgO–C samples were significantly improved,e.g.,the apparent porosity of 7.58%–8.04%,the bulk density of 2.98–2.99 g cm-3,the cold compressive strength of 55.72–57.93 MPa,the residual strength after three air quenching at 1100°C of 74.86%–78.04%,and the decarburized layer depth after oxidized at 1400°C for 2 h of 14.03–14.87 mm.Consequently,the idea for the rapid synthesis of Al_(2)O_(3)–SiC composite powder provides an alternative low-carbon MgO–C refractories performance optimization strategy.
基金the National Natural Science Foundation of China(Nos.51672170 and 51702206)Shanghai Science and Technology Commission Research Project(No.17XD1424700)。
文摘ZrB_(2)-Al_(2)O_(3)composite powders were synthesized at 1100℃using a novel ZrB_(2)precursor and Al powders as raw materials.The final ZrB_(2)-Al_(2)O_(3)composite powders consisted of submicron Al_(2)O_(3)and nanosize ZrB_(2)(50-100 nm)particles,which were homogeneously mixed in microscale.Combined with thermodynamic calculation and experiment results,the formation mechanism of ZrB_(2)-Al_(2)O_(3)composite powders was proposed as follows:ZrB_(2)precursor first decomposed into ZrO_(2)and amorphousB2O3.Aluminothermic reduction of ZrO_(2) and B_(2)O_(3) generated Zr and B atoms and the coproducts Al_(2)O_(3),and then,a series of reactions between Zr atoms,B atoms and Al took place to form ZrB_(2)and Al_(3)Zr.Then,ZrB_(2),Al_(2)O_(3)and Al were obtained through a liquid-solid reaction between Al_(3)Zr andB2O3,which is the limiting step in the conversion process.When the Al_(3)Zr was exhausted,the reaction between Al,ZrO_(2)and B became the main reaction to obtain ZrB_(2)and Al_(2)O_(3).
