Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface...Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface area analysis. Most of the particles are in the size range of 20—100 nm. The BET specific surface area of synthesized nanoscale Pd/Fe particles is 12.4 m 2/g. In contrast, a commercially available fine iron powder(<100 mesh) has a specific surface area of 0.49 m 2/g. Batch studies demonstrated that the nanoscale particles can effectively dechlorinate o-chlorophenol. The dechlorination reaction takes place on the surface of synthesized nanoscale Pd/Fe bimetallic particles in a pseudo-first order reaction. The surface-area-normalized rate coefficients(k_ SA) are comparable to those reported in the literature for chlorinated ethenes. The observed reaction rate constants(k_ obs) are dominated by the mass fraction of Pd and the mass concentration of the nanoscale Pd/Fe particles.展开更多
Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the labora...Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the laboratory for treatment of o-chlorophenol. Most of the nanoscale particles are in the size range of 20—100 nm. BET specific surface area of the nanoscale Pd/Fe particles is 12.4 m2/g. In comparison, a commercially available Fe powder(<100 mesh) has a specific surface area of just 0\^49 m2/g. Batch experiments demonstrated that the nanoscale Pd/Fe bimetallic particles can effectively dechlorinate o-chlorophenol. Dechlorination efficiency is affected by the mass fraction of Pd in the bimetal, nanoscale Pd/Fe mass concentration and mixing intensity.展开更多
This paper examined the potential of using laboratory-synthesized nanoscale Pd/Fe bimetallic particles to dechlorinate chlorinated methanes, including dichloromethane (DCM), trichloromethane (CF) and tetrachloromethan...This paper examined the potential of using laboratory-synthesized nanoscale Pd/Fe bimetallic particles to dechlorinate chlorinated methanes, including dichloromethane (DCM), trichloromethane (CF) and tetrachloromethane (CT). Nanoscale Pd/Fe bimetallic particles were characterized in terms of surface area, morphology, size and structure. The parameters affecting the dechlorination efficiency were studied through batch experiments. Effects of Pd content, Pd/Fe addition, and the initial pH value of reaction system on the dechlorination efficiency of chlorinated methanes were determined systematically. Results show that nanoscale Pd/Fe bimetallic particles play a prominent role in the dechlorination of chlorinated methanes. The change of pH value and ferrous ion concentration during dechlorination reaction were also investigated in this study. It is found that the dechlorination efficiency of chlorinated methanes is in the order of CT>CF>DCM.展开更多
Palladium/iron bimetallic nanoparticles were synthesized using microemulsion method in the water-in-oil (W/O) microemulsion system, which was made up of iso-octane, cetyltrimethyl-ammonium bromide (CTAB), butanol and ...Palladium/iron bimetallic nanoparticles were synthesized using microemulsion method in the water-in-oil (W/O) microemulsion system, which was made up of iso-octane, cetyltrimethyl-ammonium bromide (CTAB), butanol and water and characterized by measuring the conductivity of the solution. Transmission electron microscope (TEM) and energy dispersive X-ray microanalysis (EDX) analysis showed that the av-erage diameter of synthesized palladium/iron bimetallic nanoparticles was less than 80 nm, which was much smaller than the particles produced by the solution method. The palladium/iron bimetallic nanoscale particles produced in the laboratory showed better performance on dechlorinating TCE than the other materials. The nanoscale Fe/Pd particles exhibited high reactivity. When Pd content is 0.5%, the best TCE dechlorination efficiency is achieved within 30min. And Fe/Pd nanoparticles show persistent reaction activity in some sense.展开更多
Nanoscale palladized iron(Pd/Fe)bimetallic particles were prepared by reductive deposition method.The particles were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM),tr...Nanoscale palladized iron(Pd/Fe)bimetallic particles were prepared by reductive deposition method.The particles were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM),transmission electron microscope(TEM),and Brunauer-Emmett-Teller-nitrogen(BET-N_2)method.Data obtained from those methods indicated that nanoscale Pd/Fe bimetallic particles containedα-Fe^0.Detected Pd to Fe ratio by weight(Pd/Fe ratio)was close to theoretical value. Spherical granules with diame...展开更多
Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM ...Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM （transmission electron microscope）, XRD （X-ray diffractometer）, and N2-BET. The dechlorination activity of the Ni/Fe was investigated using p-chlorophenol （p-CP） as a probe agent. Results demonstrated that the nanoscale Ni/Fe could effectively dechlorinate p-CP at relatively low metal to solution ratio of 0.4 g/L （Ni 5 wt%）. The target with initial concentration ofp-CP 0.625 mmol/L was dechlorinted completely in 60 rain under ambient temperature and pressure. Factors affecting dechlorination efficiency, including reaction temperature, pH, Ni loading percentage over Fe, and metal to solution ratio, were investigated. The possible mechanism of dechlorination ofp-CP was proposed and discussed. The pseudo-first- order reaction took place on the surface of the Ni/Fe bimetallic particles, and the activation energy of the dechlorination reaction was determined to be 21.2 kJ/mol at the temperature rang of 287-313 K.展开更多
The structure and magnetic properties of Fe76.5Si13.5B9Cu1 alloys with a nanocrystalline (NC) bcc Fe(Si) phase trom about 23 to 46 nm in diameter, which were first formed into amorphous ribbons and then annealed at va...The structure and magnetic properties of Fe76.5Si13.5B9Cu1 alloys with a nanocrystalline (NC) bcc Fe(Si) phase trom about 23 to 46 nm in diameter, which were first formed into amorphous ribbons and then annealed at various temperatures between 703 and 773 K, have been investigated. At annealing temperatures from 703 to 748 K, the single NC bcc(Si) phase is obtained in the crystallized alloys. The grain size and the Si-content in the NC bcc Fe(Si) phase for the alloys annealed at different temperatures are presented. The soft magnetic properties and the saturation magnetostriction for the alloys with the NC bcc Fe(Si) phase are also measured. The results show that, the saturation magnetizotion and the permeability are improved for the alloys with only the NC bcc Fe(Si) phase and become better with decreasing of the NC bcc phase size, and the saturation magnetostriction declines for the alloys with increasing Si-content in the NC bcc Fe(Si) phase.展开更多
文摘Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface area analysis. Most of the particles are in the size range of 20—100 nm. The BET specific surface area of synthesized nanoscale Pd/Fe particles is 12.4 m 2/g. In contrast, a commercially available fine iron powder(<100 mesh) has a specific surface area of 0.49 m 2/g. Batch studies demonstrated that the nanoscale particles can effectively dechlorinate o-chlorophenol. The dechlorination reaction takes place on the surface of synthesized nanoscale Pd/Fe bimetallic particles in a pseudo-first order reaction. The surface-area-normalized rate coefficients(k_ SA) are comparable to those reported in the literature for chlorinated ethenes. The observed reaction rate constants(k_ obs) are dominated by the mass fraction of Pd and the mass concentration of the nanoscale Pd/Fe particles.
文摘Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the laboratory for treatment of o-chlorophenol. Most of the nanoscale particles are in the size range of 20—100 nm. BET specific surface area of the nanoscale Pd/Fe particles is 12.4 m2/g. In comparison, a commercially available Fe powder(<100 mesh) has a specific surface area of just 0\^49 m2/g. Batch experiments demonstrated that the nanoscale Pd/Fe bimetallic particles can effectively dechlorinate o-chlorophenol. Dechlorination efficiency is affected by the mass fraction of Pd in the bimetal, nanoscale Pd/Fe mass concentration and mixing intensity.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 50978066)State Key Laboratory of Urban Water Resources and Environment (Grant No.2008DX06)
文摘This paper examined the potential of using laboratory-synthesized nanoscale Pd/Fe bimetallic particles to dechlorinate chlorinated methanes, including dichloromethane (DCM), trichloromethane (CF) and tetrachloromethane (CT). Nanoscale Pd/Fe bimetallic particles were characterized in terms of surface area, morphology, size and structure. The parameters affecting the dechlorination efficiency were studied through batch experiments. Effects of Pd content, Pd/Fe addition, and the initial pH value of reaction system on the dechlorination efficiency of chlorinated methanes were determined systematically. Results show that nanoscale Pd/Fe bimetallic particles play a prominent role in the dechlorination of chlorinated methanes. The change of pH value and ferrous ion concentration during dechlorination reaction were also investigated in this study. It is found that the dechlorination efficiency of chlorinated methanes is in the order of CT>CF>DCM.
文摘Palladium/iron bimetallic nanoparticles were synthesized using microemulsion method in the water-in-oil (W/O) microemulsion system, which was made up of iso-octane, cetyltrimethyl-ammonium bromide (CTAB), butanol and water and characterized by measuring the conductivity of the solution. Transmission electron microscope (TEM) and energy dispersive X-ray microanalysis (EDX) analysis showed that the av-erage diameter of synthesized palladium/iron bimetallic nanoparticles was less than 80 nm, which was much smaller than the particles produced by the solution method. The palladium/iron bimetallic nanoscale particles produced in the laboratory showed better performance on dechlorinating TCE than the other materials. The nanoscale Fe/Pd particles exhibited high reactivity. When Pd content is 0.5%, the best TCE dechlorination efficiency is achieved within 30min. And Fe/Pd nanoparticles show persistent reaction activity in some sense.
文摘Nanoscale palladized iron(Pd/Fe)bimetallic particles were prepared by reductive deposition method.The particles were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM),transmission electron microscope(TEM),and Brunauer-Emmett-Teller-nitrogen(BET-N_2)method.Data obtained from those methods indicated that nanoscale Pd/Fe bimetallic particles containedα-Fe^0.Detected Pd to Fe ratio by weight(Pd/Fe ratio)was close to theoretical value. Spherical granules with diame...
基金Project supported by the National Basic Research Program (973) of China(No. 2003CB415006)the National Natural Science Foundation of China (No. 20337020)
文摘Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM （transmission electron microscope）, XRD （X-ray diffractometer）, and N2-BET. The dechlorination activity of the Ni/Fe was investigated using p-chlorophenol （p-CP） as a probe agent. Results demonstrated that the nanoscale Ni/Fe could effectively dechlorinate p-CP at relatively low metal to solution ratio of 0.4 g/L （Ni 5 wt%）. The target with initial concentration ofp-CP 0.625 mmol/L was dechlorinted completely in 60 rain under ambient temperature and pressure. Factors affecting dechlorination efficiency, including reaction temperature, pH, Ni loading percentage over Fe, and metal to solution ratio, were investigated. The possible mechanism of dechlorination ofp-CP was proposed and discussed. The pseudo-first- order reaction took place on the surface of the Ni/Fe bimetallic particles, and the activation energy of the dechlorination reaction was determined to be 21.2 kJ/mol at the temperature rang of 287-313 K.
文摘The structure and magnetic properties of Fe76.5Si13.5B9Cu1 alloys with a nanocrystalline (NC) bcc Fe(Si) phase trom about 23 to 46 nm in diameter, which were first formed into amorphous ribbons and then annealed at various temperatures between 703 and 773 K, have been investigated. At annealing temperatures from 703 to 748 K, the single NC bcc(Si) phase is obtained in the crystallized alloys. The grain size and the Si-content in the NC bcc Fe(Si) phase for the alloys annealed at different temperatures are presented. The soft magnetic properties and the saturation magnetostriction for the alloys with the NC bcc Fe(Si) phase are also measured. The results show that, the saturation magnetizotion and the permeability are improved for the alloys with only the NC bcc Fe(Si) phase and become better with decreasing of the NC bcc phase size, and the saturation magnetostriction declines for the alloys with increasing Si-content in the NC bcc Fe(Si) phase.
