The Effect of Annealing under Non-vacuum on the Optical Properties of TiAlN Non-vacuum Solar Selective Absorbing Coating Prepared by Cathodic Arc Evaporation

TiAIN solar selective absorbing coatings which were deposited on 304L stainless steel using cathodic arc evaporation method were annealed under non-vacuum at different temperatures with different times. The optical properties （absorptance and emittance） of the coatings were measured by a spectrophotometer. It was found that, after being annealed for 2 hours at different temperatures, the absorptance of the coatings reached the highest value of 0.92 at 700 ℃ while the emittance got the lowest value of 0.38 at 800 ℃. When the coatings were annealed at 600 ℃ for 24 hours, the optical properties changed to 0.92/0.44 （absorptance/ emittance）. By measuring the structure, morphology, elements and surface roughness of the coatings, it was found that both the elemental composition and the surface roughness of the coatings changed as a result of annealing, and these changes caused the change of the optical properties of the coatings.

The bactericidal effect of continuous wave laser with strongly absorbing coating at the fiber tip

The bactericidal effect of laser radiation with a quartz fiber-based transmission system with a strong absorption coating converter against bacteria associated with urological stones has been studied.Gr am-negative rod Escherichia coli and the Gram-positive coccus Staphylococcus epi-dermidis,Staphylococcus aureus,Enterococcus faecalis and Enterococcus faecium were used in this study.Each bacterial species was treated by continuous-wave near infrared laser coupled with bare fiber tip or strongly absorption coating fiber tip.After treatment,the temperature of bacterial suspension was measured.In addition,the temperature dist ribution was analyzed.It has been shown that using laser with a strongly absorption coating fiber tip results in significant bactericidal effect.The decrease of the amount of E.coli and S.epidermidis was 100%after treatment with an output power of6 W of radiation at a wavelength of 0.97 pum for 40s.Number of S.aureus and Ent.facium colony-forming unit was reduced to 70%after same exposure.The peak temperature of bacterial suspension was 86℃ after treatment by laser with a strongly absorption coating fiber tip.Laser with a strongly absorpt ion coating fiber tip provides large scale hydrodynamic flows directed away from the fiber tip.The laser with a strongly absorption coating fiber tip has bactericidal effect.The main role is associated with the effect of high temperature,which,in the form of flow in a liquid medium,afects bacteria.

Wave-absorbing Properties of a Cement-based Coating with MnO2/Activated Carbon Composite

MnO_2/activated carbon composite（Mn-ACC） wave absorber was prepared by the reaction between Mn（CH_3COO）_2 and KMnO_4 on activated carbon. Then, a novel cement based composite absorbing coating（CB-CAC） was prepared by adding the Mn-ACC, manganese zinc ferrite and rubber particles into cement. XRD method was used to analyze the reaction products of the Mn-ACC. The tensile bond strength and the wave absorbing properties of the CB-CACs were also tested. The results showed that the crystallinity of MnO_2 formed in the Mn-ACC was poor. Adding Mn-ACC into the CB-CAC led to first increase and then decrease of the tensile bond strength. The tensile bond strength reached 1.89 MPa with 8.51% of the Mn-ACC. The CB-CACs obtained the optimal absorbing properties with the cement, manganese zinc ferrite, Mn-ACC, rubber particles and H_2O mass ratio of 7.5？7.5？1？1？5.5, respectively. The band width of the reflection below-10 dB was up to 8.8 GHz, which accounted for 57.14% of the test band.

Near-Infrared Spectroscopy Combined with Absorbance Upper Optimization Partial Least Squares Applied to Rapid Analysis of Polysaccharide for Proprietary Chinese Medicine Oral Solution

Near-infrared (NIR) spectroscopy was applied to reagent-free quantitative analysis of polysaccharide of a brand product of proprietary Chinese medicine (PCM) oral solution samples. A novel method, called absorbance upper optimization partial least squares (AUO-PLS), was proposed and successfully applied to the wavelength selection. Based on varied partitioning of the calibration and prediction sample sets, the parameter optimization was performed to achieve stability. On the basis of the AUO-PLS method, the selected upper bound of appropriate absorbance was 1.53 and the corresponding wavebands combination was 400 - 1880 & 2088 - 2346 nm. With the use of random validation samples excluded from the modeling process, the root-mean-square error and correlation coefficient of prediction for polysaccharide were 27.09 mg·L-1 and 0.888, respectively. The results indicate that the NIR prediction values are close to those of the measured values. NIR spectroscopy combined with AUO-PLS method provided a promising tool for quantification of the polysaccharide for PCM oral solution and this technique is rapid and simple when compared with conventional methods.

Q-Switched Erbium-Doped Fiber Laser Using Cadmium Selenide Coated onto Side-Polished D-Shape Fiber as Saturable Absorber

A stable Q-switched erbium doped fiber laser emitting at 1558 nm is demonstrated using a cadmium selenide（CdSe） material coated onto a side-polished D-shape fiber as the saturable absorber（SA）. By elevating the input pump power from the threshold of 91 mW to the maximum available power of 136 mW, a pulse train with a maximum repetition rate of 57.44 kHz, minimum pulse width of 3.76 us, maximum average output power of7.99 mW, maximum pulse energy of 0.1391 uJ, and maximum peak power of 36.99 mW are obtained. The signalto-noise ratio of the spectrum is measured to be around 75 dB. This CdSe based SA is simple, robust, and reliable,and thus suitable for making a portable pulse laser source.

Preparation and Mechanical Properties of Glass Coats with High Temperature Radar Absorber

BaO-La2O3-B2O3 （BLB） glass, suitable to be used as a sealing between metals, was chosen to be the binder in preparing glass coats on the Ti-alloy substrate. The SiCN nano-powder was introduced as the filler for the absorbing coat because it is considered to be a good high temperature absorber. The effect of the coating temperature and coating time on the tensile strength of the glass coat was investigated and the proper coating parameters to get good mechanical properties were determined. In addition, the effects of the SiCN content on the tensile strength of the absorbing coat were also discussed. Results show that it is possible to prepare the glass coat using the BLB glass as a binder. That the coat formed at 730℃ for 30 min has the best tensile strength witnesses 730 ℃, 30 min to be the proper parameter to prepare the glass coat. The BLB glass coat without SiCN powder possesses good tensile strength and the introduction of the SiCN absorber into the glass coat will lower the tensile strength. As the SiCN content increases, the tensile strength of the absorbing coat decreases, which could be attributed to the aggregation of SiCN in the coats.

Study on the electromagnetic properties of a coated radar absorbent

The sol-gel method is used to fabricate Fe crystalline powders coated with SiO2. By controlling the molar ratio R of diluted water to tetraethoxysilane （TEOS）, Fe powders coated with SiO2 with different morphological characteristics are fabricated. The influence of the core diameter on electroragnetic parameters is investigated. The effect of the amount of the coating material SiO2 on electromagnetic parameters is given. Radar wave absorbing properties of Fe coated with SiO2 and TiO2 respectively are compared.

The influence on biotissue laser resection of a strongly absorbing layer at the optical fiber tip

In this paper,we consider a method of laser resection using the silica glass core from which the cladding layer has been removed as the cutting part of a laser scalpel.An absorbing layer coating the silica fiber tip markedly alters its biotissue cutting character istics.The results of histological studies of skin after exposure to a laser scalpel with and without a strongly absorbing coating(SAC)at a wavelength of 097μm show that resection using a coated scalpel is more sparing.When an uncoated scalpel was used,skin injury was more apparent in both its surface spread and the depth of structural damage,resulting in poorer tissue regeneration.

AO-MW-PLS method applied to rapid quantification of teicoplanin with near-infrared spectroscopy

Teicoplanin(TCP)is an important lipoglycopeptide antibiotic produced by fermenting Acti-noplanes teichomyceticus.The change in TCP concentration is important to measure in the fermentation process.In this study,a reagent-free and rapid quantification method for TCP in the TCP-Tris-HCl mixture samples was developed using near infrared(NIR)spectroscopy by focusing our attention on the fermentation process for TCP.The absorbance optimization(AO)partial least squares(PLS)was proposed and integrated with the moving window(MW)PLS,which is called AO-MW-PLS method,to select appropriate wavebands.Amodel set that includes various wavebands that were equivalent to the optimal AO-MW-PLS waveband was,proposed based on statistical considerations.The public region of all equivalent wavebands was just one of the equivalent wavebands.The obtained public regions were 1540-1868 nm for TCP and 1114-1310 nm for Tris.The root-mean-square error and correlation coeficient for leave-one-out cross validation were 0.046 mg mL^(-1)and 0.9998 mg mL^(-1)for TCP,and 0.235 mg mL^(-1)and 0.9986 mg mL^(-1)for Tris,respectively.All the models achieved highly accurate prediction effects,and the selected wavebands provided valuable references for designing specialized spectrometers.This study provided a valuable reference for further application of the proposed methods to TCP fermentation broth and to other spectroscopic analysis fields.

Electromagnetic Waves Absorbing Characteristics of Composite Material Containing Carbonyl Iron Particles

Results of measurements of permeability, permittivity and radar absorption properties of composites on basis of carbonyl iron particles R-10 brand are presented in this paper. The calculations and experimental studies have shown that in the super high frequency (SHF) and extremely high frequency (EHF) ranges on the basis of two-layer structures with different content of carbonyl iron particles can create a radar absorbing coatings with a reflectivity of less than -10 dB over a wide bandwidth from 3.1 to 17.1 GHz and from 27 to 37 GHz. Absorbing properties of composites are saved in terahertz frequency range from 250 to 525 GHz.

Comparative Analysis of Biotissue Laser Resection Using Strongly Absorbing Optical Fiber Tips

We present a laser resection technique to be used when biotissue is heated by laser radiation to the temperature of material softening and then moved apart by the lateral edge of the optical fiber with a strongly absorbing tip. The absorbing tip allows the decrease in the power of effective cutting of the laser scalpel at the wavelength of 0.97 μm. And it changes the resection speed as well as the characteristics of the damage of the tissues adjacent to the incision in experiments on model media and experimental animals.

A review of high-temperature selective absorbing coatings for solar thermal applications

Solar selective absorbing coatings directly harvest solar energy in the form of heat.The higher temperatures are required to drive higher power-cycle efficiencies in favor of lower costs of energy.According to different dielectrics,high temperature coatings can mainly be divided to double cermet solar selective coatings,transition metal nitride multilayer coatings and transition metal oxide multilayer coatings.This paper assesses the photothermal conversion efficiency and thermal stability,and discusses the challenges and strategies of improving both thermal and optical properties.Double cermet layers can stabilize nanocrystalline structures by alloying,while transition metal nitride/oxide layers generally choose the reliable materials with superior mechanical properties and thermal stability.The purpose of this review is to get the optimized systems,and propose further research directions at higher temperature,such as all-ceramic absorbing coatings.

Enhanced Microwave Absorption for High Filler Content Composite Molded from Polymer Coated Flaky Carbonyl Irons Modified by Silane Coupling Agents

A microwave absorbing sheet with a high complex permeability and a relatively low complex permittivity is obtained by molding of the densely coated flaky carbonyl iron particles(FCIPs)by styrenebutadiene-styrene block copolymer(SBS)in the assistance of coupling agent modification.Direct molding of the core-shell FCIPs without adding extra binder results in a large permeability due to the high filling ratio(55vol%)of absorbents.Importantly,the permittivity is well suppressed by the dense insulate polymer shell on the FCIPs,avoiding the severe impedance mismatch problem of the high filler content microwave absorbing materials.Investigations show that modifying the surface of FCIPs by proper amount of silane coupling agent is critical for the coating quality of the SBS shell,which is verified by resistivity and corrosion current density measurements,and can be interpreted by improved interfacial compatibility between the modified FCIPs and SBS.The obtained microwave absorbing sheet shows a minimum reflection loss of-38.74 dB at 1.57 GHz and has an effective absorption bandwidth from 1.1 to 2.3 GHz at a relatively small thickness of 2 mm.

Improvement of thermal stability of ZrSiON based solar selective absorbing coating

Solar selective absorbing coatings(SSACs)are required to have not only excellent optical property but also outstanding thermal stability for high temperature applications.The optical properties of Mo/ZrSiN/ZrSiON/SiO_(2) SSAC had been optimized successfully before.Herein,we are focusing on the evaluation and mechanism of thermal stability of this multilayer coating for its potential applications in concentrated solar power(CSP)systems.Fortunately,the coating exhibits excellent thermal stability after aging at 400℃ for 1500 h in vacuum.At aging temperature of 500℃ for 1000 h or 600℃ for 300 h in vacuum,the slight inter-diffusion between Mo layer and stainless steel(SS)substrate occurs.At higher aging temperature of 700℃ for 100 h in vacuum,the serious inter-diffusion between Mo layer and SS substrate leads to invalidation of the coating,which has been evidenced by Rutherford backscattering spectrometry(RBS)and X-ray diffraction(XRD)technologies.Additionally,this coating also has an outstanding thermal stability after aging at 400℃for 300 h in air.A heating-cooling cycling(HCC)treatment evidences the good thermal stability of this coating working in cold environment(60℃).The results reveal that this coating can be a promising candidate not only for CSP system in high temperatures but also for usage in cold environment.

Synthesis and Characterization of Copper-Zinc-Tin-Sulfide(CZTS)Thin Film Absorber Layer for Solar Cell Application

Copper zinc tin sulfide(CZTS)thin film was synthesized on soda lime glass substrate by using spin coating method.The synthesized CZTS thin film showed maximum absorption coefficient of 0.193×104 cm-1 and maximum extinction coefficient of 0.011.The direct optical band gap,Urbach energy and steepness parameter of the synthesized CZTS thin film were 1.52 eV,0.52 eV and 0.05 respectively.The CZTS thin film was found to be polycrystalline tetragonal in nature.The scanning electron microscopy(SEM)revealed that the texture structure was formed for the CZTS thin film.

Optical Design and Preparation of High Performance Mo/NiAlN/NiAlON/SiO_2 Solar Selective Absorbing Coating

A new solar selective absorbing coating of Mo/NiAlN/NiAlON/SiO_2 multilayer was prepared on stainless steel(SS) substrates by magnetron sputtering for solar thermal power applications. The optical constants and thickness of individual layers were simulated using the Scout software based on the experimentally measured reflectance and transmittance spectra of individual layers. The coating of Mo/NiAlN/NiAlON/SiO_2 with an ideal solar absorptance(α) of 0.945 in the solar spectrum range was designed via the optical constants of each layer in the Scout software. The Mo/NiAlN/NiAlON/SiO_2 coating was deposited via the optimized layer thickness. A good spectral selectivity with absorptance(α=0.936) and emittance(ε=0.09, T=80 ℃) was obtained. This method, which incorporates the optical simulation with the related experiments, provides a convenient approach to obtain the ideal solar selective absorbing coatings.

Preparation of solar selective absorbing CuO coating for medium temperature application

A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem-perature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experi-ment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without losing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.

The Effects of Antiretroviral Drugs on the Absorbance Characteristics of HIV-Infected Blood

In the twenty first century research works, there may be a need to achieve a more reliable research result through a synergy between engineers and biological researchers. The peak absorbance data for various interacting systems were measured. These were used to show that the antiretroviral drug has the effect of increasing the peak absorbance values of both the uninfected and infected blood components, i.e., the drugs are made able to increase the light absorption capacity of the blood cells. For drug 2 that contains three components including Efavirenz, the drug effect on lymphocytes was increased by about 38% for patients that had been on antiretroviral drug treatment. Mathematical models were proposed and used in determining the coating effectiveness of antiretroviral drugs in the presence and absence of HIV. The use of the findings of this work by pharmaceutical industries may help in the search for more effective antiretroviral drugs for the treatment of HIV patients.

全玻璃真空太阳集热管关键技术参数研究进展

全玻璃真空太阳集热管是太阳能热利用系统的重要组成部分,其性能参数的优劣直接影响到太阳能热利用系统的热性能、耐久可靠性和节能效果。文章从真空管基本结构和工作原理的介绍出发,对影响真空管性能的光学性能、热性能等关键技术参数及玻璃管材料、真空性能等其他技术要求的研究进展做了详细分析,并在长期从事科研和检测工作的基础上,给出了提升真空管的产品性能可从玻璃管生产优化、新涂层开发、真空性能加强、技术创新、先进设备开发、标准修订等方面的建议。

具有抗紫外线功能的光固化涂料组合物的制备与性能研究

以羟基二苯甲酮、2-巯基苯并噁唑、芳基酰氯为原料,采用简单、温和的方法合成了新型二苯甲酮衍生物和含苯并噁唑的硫酯类衍生物,采用核磁氢谱1H NMR、核磁碳谱13C NMR和高分辨质谱HRMS等测试手段对目标化合物进行表征,并对其进行了光学性能测试,并用其制备了具有抗紫外线功能的光固化涂料。结果表明:两类衍生物能有效吸收220~350 nm的紫外光,与低聚物、单体相容性好,无气味。新合成的二苯甲酮衍生物作为光引发剂可使涂层固化时间大幅缩短到9 s,固化膜的外观、附着力和凝胶率相较于市售光引发剂BP有明显提高;硫酯类衍生物作为紫外吸收剂不仅能够增加光固化涂层的抗紫外线功能,且易于光固化涂料的制造、贮存。该组合物在罩面剂、油墨、胶黏剂等领域也有良好的应用前景。