The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in ne...The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.展开更多
The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading c...The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading condition was controlled mainly by stress corrosion cracking （SCC） mechanism. Under mixed-mode cyclic loading, both higher tensile stress and shear stress made cracks easier to propagate. Applied cathodic potentials and high content of carbon dioxide in solutions also promoted the propagation of cracks. The propagation directions of cracks were different under different cyclic loading conditions. Under mode I （pure tensile stress） cyclic loading condition, cracks were straight and perpendicular to the tensile stress axis, while under mixed-mode 1/111 （tensile/shear stress） cyclic loading,cracks were sinuous and did not propagate in the direction perpendicular to the main tensile stress axis. Under the mixed-mode cyclic loading, cracks were much easier to propagate, suggesting that shear stress intensified the role of tensile stress. In addition, shear stress promoted the interaction between cracks, resulting in easier coalescence of cracks.展开更多
Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute （API） X80 pipeline steel applied in the 2nd West-East （;as Pipeline project with and without prelo...Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute （API） X80 pipeline steel applied in the 2nd West-East （;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.展开更多
目的研究X80管线钢在近中性p H溶液中的腐蚀与应力腐蚀裂纹萌生行为。方法采用电化学实验和浸泡实验研究X80管线钢在近中性p H溶液中的腐蚀行为,采用慢应变速率拉伸实验研究X80管线钢在近中性p H溶液中,在自腐蚀电位和外加电位下的应力...目的研究X80管线钢在近中性p H溶液中的腐蚀与应力腐蚀裂纹萌生行为。方法采用电化学实验和浸泡实验研究X80管线钢在近中性p H溶液中的腐蚀行为,采用慢应变速率拉伸实验研究X80管线钢在近中性p H溶液中,在自腐蚀电位和外加电位下的应力腐蚀裂纹萌生行为。结果 X80管线钢在近中性p H溶液中的极化曲线只有活化区,没有钝化区,其自腐蚀电位约为-750 m V,浸泡195天后,试样表面没有氧化膜出现,但是观察到点蚀坑。在自腐蚀电位下,X80管线钢试验表面有大量的应力腐蚀裂纹;在-500 m V阳极外加电位下,X80管线钢试验表面几乎没有观察到应力腐蚀裂纹;在-850 m V阴极外加电位下,X80管线钢试验表面的应力腐蚀裂纹很少,但是随着外加阴极电位负移到-1300 m V时,X80管线钢试验表面的应力腐蚀裂纹增多。结论 X80管线钢在近中性p H溶液中发生均匀腐蚀,但是夹杂物剥落能在X80管线钢表面形成点蚀坑。在近中性p H溶液中,在自腐蚀电位下,X80管线钢应力腐蚀裂纹萌生敏感性最强;外加阴极电位抑制应力腐蚀裂纹萌生,但是随着外加阴极电位的负移,应力腐蚀裂纹萌生敏感性增强;外加阳极电位下,由于均匀腐蚀的作用,应力腐蚀裂纹萌生敏感性较弱。展开更多
基金This work was supported by the Special Funds for the Major State Basic Research Projects G19990650 in China,also supported by the Science and Technology Commission of Shanghai Municipality via projects 025258036 and 02ZE14031.
文摘The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.
基金This work was supported by the Special Funds for the Major State Basic Research Projects in China(No.G19990650)also supported by the Science and Technology Comm is—sion of Shanghai Municipality(Projects Nos.025258036 and 02ZE14031
文摘The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading condition was controlled mainly by stress corrosion cracking （SCC） mechanism. Under mixed-mode cyclic loading, both higher tensile stress and shear stress made cracks easier to propagate. Applied cathodic potentials and high content of carbon dioxide in solutions also promoted the propagation of cracks. The propagation directions of cracks were different under different cyclic loading conditions. Under mode I （pure tensile stress） cyclic loading condition, cracks were straight and perpendicular to the tensile stress axis, while under mixed-mode 1/111 （tensile/shear stress） cyclic loading,cracks were sinuous and did not propagate in the direction perpendicular to the main tensile stress axis. Under the mixed-mode cyclic loading, cracks were much easier to propagate, suggesting that shear stress intensified the role of tensile stress. In addition, shear stress promoted the interaction between cracks, resulting in easier coalescence of cracks.
基金supported by the National Natural Science Foundation of China (Grant No. 51025104)
文摘Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute （API） X80 pipeline steel applied in the 2nd West-East （;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.
文摘目的研究X80管线钢在近中性p H溶液中的腐蚀与应力腐蚀裂纹萌生行为。方法采用电化学实验和浸泡实验研究X80管线钢在近中性p H溶液中的腐蚀行为,采用慢应变速率拉伸实验研究X80管线钢在近中性p H溶液中,在自腐蚀电位和外加电位下的应力腐蚀裂纹萌生行为。结果 X80管线钢在近中性p H溶液中的极化曲线只有活化区,没有钝化区,其自腐蚀电位约为-750 m V,浸泡195天后,试样表面没有氧化膜出现,但是观察到点蚀坑。在自腐蚀电位下,X80管线钢试验表面有大量的应力腐蚀裂纹;在-500 m V阳极外加电位下,X80管线钢试验表面几乎没有观察到应力腐蚀裂纹;在-850 m V阴极外加电位下,X80管线钢试验表面的应力腐蚀裂纹很少,但是随着外加阴极电位负移到-1300 m V时,X80管线钢试验表面的应力腐蚀裂纹增多。结论 X80管线钢在近中性p H溶液中发生均匀腐蚀,但是夹杂物剥落能在X80管线钢表面形成点蚀坑。在近中性p H溶液中,在自腐蚀电位下,X80管线钢应力腐蚀裂纹萌生敏感性最强;外加阴极电位抑制应力腐蚀裂纹萌生,但是随着外加阴极电位的负移,应力腐蚀裂纹萌生敏感性增强;外加阳极电位下,由于均匀腐蚀的作用,应力腐蚀裂纹萌生敏感性较弱。
