In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip sp...In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.展开更多
The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing...The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.展开更多
The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis ...The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures.This formulation was applied to numerous numerical examples of non-woven fabrics.As CSFEM schemes do not require coordinate transformation,spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two,three and four smoothing cells.An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors,which allowed to remove the integral operator in the strain smoothing operation.This procedure conducted both to the simplification of the developed formulation and the reduction of computational cost.A wide range of values for the thickness-to-length ratio and edge boundary conditions were analysed.The developed numerical model proved to overcome the shear locking phenomenon with success,revealing both reduced implementation effort and computational cost in comparison to the conventional FEM approach.The cell-based strain smoothing technique used in this work yields accurate results and generally attains higher convergence rate in energy at low computational cost.展开更多
Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishin...Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.展开更多
Situated in the Shilong Industrial District of Mentougou, Beijing, the Beijing Dayuan Non-woven Fabric Co. Ltd is a Sino-foreign joint venture producing non-woven fabrics, set up in 1991.
In this paper,the relations between the parameters of stitch structure and the needle penetra-tion force,and the method by using the needle penetration force detected to evaluate the looplength and evenness of knitted...In this paper,the relations between the parameters of stitch structure and the needle penetra-tion force,and the method by using the needle penetration force detected to evaluate the looplength and evenness of knitted fabric indirectly are analysed and discussed.A microcomputer system with a needle sensor and author’s program are used as a pick up setcombined with a data analysis system,for sampling and analysing the needle penetration forcedata.A lot of experimental research work has been done for knitted fabric of some kinds of knittedstitch and loop length.As a summary of this study,some conclusions can be drawn from the linearregression between the needle penetration force and the loop length.Then,the size and evenness ofthe loop length of knitted fabric can be indicated indirectly by detecting the value and variance ofneedle penetration force.It offers an effective method to detect and evaluate the evenness of knit-ted fabric with an efficiently high speed.展开更多
Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Que...Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Questar micro-images in combination with the SEM observation and the measurement of some macrostructure indices, the relationship between the processing parameters and the structure especially the microstructure is emphasized Finally the effect of somestructure factors on filtration properties is discussed theoretically.展开更多
The article reveals the development and analysis of fabric structure for its moisture absorbency property and its application in Civil engineering for curing of concrete. The presence of moisture in concrete and time ...The article reveals the development and analysis of fabric structure for its moisture absorbency property and its application in Civil engineering for curing of concrete. The presence of moisture in concrete and time of curing are the major influencing factors for concrete strength. Normal practice of curing is to wrap the concrete with jute woven fabric and spraying of water. The absorbency characteristics of different GSM (Gram per square meter) of woven and Non-woven fabric were studied. The Non-woven fabric absorbency is superior to woven fabric of same GSM by its three dimensional structure and high pore volume. The strength of concrete cured with Non- woven fabric is 2.1 N/mm2 higher than woven fabric of same 350 GSM. The difference in compressive strength of Non-woven fabric of 350 GSM and 750 GSM is 0.06 N/mm2 which is marginal.展开更多
Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost anal...Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.展开更多
文摘In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.
文摘The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.
基金supported by the Portuguese Foundation for Science and Technology(FCT)through project UID/CTM/00264/2019 of 2C2T—Centro de Ciência e Tecnologia Têxtil,hold by National Founds of FCT/MCTES,and project UID/EEA/04436/2013,COMPETE 2020 with the code POCI-01-0145-FEDER-006941.
文摘The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures.This formulation was applied to numerous numerical examples of non-woven fabrics.As CSFEM schemes do not require coordinate transformation,spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two,three and four smoothing cells.An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors,which allowed to remove the integral operator in the strain smoothing operation.This procedure conducted both to the simplification of the developed formulation and the reduction of computational cost.A wide range of values for the thickness-to-length ratio and edge boundary conditions were analysed.The developed numerical model proved to overcome the shear locking phenomenon with success,revealing both reduced implementation effort and computational cost in comparison to the conventional FEM approach.The cell-based strain smoothing technique used in this work yields accurate results and generally attains higher convergence rate in energy at low computational cost.
基金National Natural Science Foundation of China(Regional Fund)(No.51863020)
文摘Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.
文摘Situated in the Shilong Industrial District of Mentougou, Beijing, the Beijing Dayuan Non-woven Fabric Co. Ltd is a Sino-foreign joint venture producing non-woven fabrics, set up in 1991.
文摘In this paper,the relations between the parameters of stitch structure and the needle penetra-tion force,and the method by using the needle penetration force detected to evaluate the looplength and evenness of knitted fabric indirectly are analysed and discussed.A microcomputer system with a needle sensor and author’s program are used as a pick up setcombined with a data analysis system,for sampling and analysing the needle penetration forcedata.A lot of experimental research work has been done for knitted fabric of some kinds of knittedstitch and loop length.As a summary of this study,some conclusions can be drawn from the linearregression between the needle penetration force and the loop length.Then,the size and evenness ofthe loop length of knitted fabric can be indicated indirectly by detecting the value and variance ofneedle penetration force.It offers an effective method to detect and evaluate the evenness of knit-ted fabric with an efficiently high speed.
文摘Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Questar micro-images in combination with the SEM observation and the measurement of some macrostructure indices, the relationship between the processing parameters and the structure especially the microstructure is emphasized Finally the effect of somestructure factors on filtration properties is discussed theoretically.
文摘The article reveals the development and analysis of fabric structure for its moisture absorbency property and its application in Civil engineering for curing of concrete. The presence of moisture in concrete and time of curing are the major influencing factors for concrete strength. Normal practice of curing is to wrap the concrete with jute woven fabric and spraying of water. The absorbency characteristics of different GSM (Gram per square meter) of woven and Non-woven fabric were studied. The Non-woven fabric absorbency is superior to woven fabric of same GSM by its three dimensional structure and high pore volume. The strength of concrete cured with Non- woven fabric is 2.1 N/mm2 higher than woven fabric of same 350 GSM. The difference in compressive strength of Non-woven fabric of 350 GSM and 750 GSM is 0.06 N/mm2 which is marginal.
文摘Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.
