In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that,...In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that, when the gauge is 1 nun, most parameters of card sliver quality are better when voltage is 600 V than those when no voltage is applied. The contents of nep, trash, visible foreign matter （VFM） and short fiber content by number （SFCn）, short fiber content by weight （SFCw）, immature fiber content （IFC） of card sliver decrease by 5.9%, 16.7%, 12.5%, 5.3%, 4.8% and 1.6%, respectively, but seed coat nep （SCN） content of card sliver doesn＇t decrease. When the electrostatic plate gauge is 2 mm and electrostatic voltage is 4000 V, the removal efficiency of neps and SCN is remarkable, decreasing by 8.7% and 25% respectively. Card sliver quality is hardly improved under any voltage when the gauge between electrostatic plate and cylinder is 3mm.展开更多
The effect of flats speed,especially higher flats speed,on card sliver quality was studied.Card sliver produced at seven flats speeds was tested with Uster AFIS.Test results show that over-high flats speed is not bene...The effect of flats speed,especially higher flats speed,on card sliver quality was studied.Card sliver produced at seven flats speeds was tested with Uster AFIS.Test results show that over-high flats speed is not beneficial to removing impurities and neps of card sliver.The flats speed from 450 to 550 mm/min is the best for removing impurity;while a speed of 450 or 650 mm/min is the best for removing neps of card sliver.The 1 050 mm/min flats speed is the best for removing short fibers.Accordingly,the flats speed of 450 mm/min is the most advantageous to improve the comprehensive quality of card sliver.It is also found that installing back-web-cleaner is very helpful to remove neps.It is also favorable to reduce short fibers,thus increasing the average length.But it is not helpful to reduce impurities in the sliver.展开更多
基金Supported by Fund of Scientific and Technological Key Project Plan of Liaoning Province , China(No.2003220026)Fund of Education Depart ment of Liaoning Province,China(No.05L147)
文摘In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that, when the gauge is 1 nun, most parameters of card sliver quality are better when voltage is 600 V than those when no voltage is applied. The contents of nep, trash, visible foreign matter （VFM） and short fiber content by number （SFCn）, short fiber content by weight （SFCw）, immature fiber content （IFC） of card sliver decrease by 5.9%, 16.7%, 12.5%, 5.3%, 4.8% and 1.6%, respectively, but seed coat nep （SCN） content of card sliver doesn＇t decrease. When the electrostatic plate gauge is 2 mm and electrostatic voltage is 4000 V, the removal efficiency of neps and SCN is remarkable, decreasing by 8.7% and 25% respectively. Card sliver quality is hardly improved under any voltage when the gauge between electrostatic plate and cylinder is 3mm.
基金Fund of Key Subject Project of Liaoning Education Department,China (No. 2009432)
文摘The effect of flats speed,especially higher flats speed,on card sliver quality was studied.Card sliver produced at seven flats speeds was tested with Uster AFIS.Test results show that over-high flats speed is not beneficial to removing impurities and neps of card sliver.The flats speed from 450 to 550 mm/min is the best for removing impurity;while a speed of 450 or 650 mm/min is the best for removing neps of card sliver.The 1 050 mm/min flats speed is the best for removing short fibers.Accordingly,the flats speed of 450 mm/min is the most advantageous to improve the comprehensive quality of card sliver.It is also found that installing back-web-cleaner is very helpful to remove neps.It is also favorable to reduce short fibers,thus increasing the average length.But it is not helpful to reduce impurities in the sliver.
