A HybridManufacturing ProcessMonitoringMethod Using Stacked Gated Recurrent Unit and Random Forest

This study proposed a new real-time manufacturing process monitoring method to monitor and detect process shifts in manufacturing operations.Since real-time production process monitoring is critical in today’s smart manufacturing.The more robust the monitoring model,the more reliable a process is to be under control.In the past,many researchers have developed real-time monitoring methods to detect process shifts early.However,thesemethods have limitations in detecting process shifts as quickly as possible and handling various data volumes and varieties.In this paper,a robust monitoring model combining Gated Recurrent Unit(GRU)and Random Forest(RF)with Real-Time Contrast(RTC)called GRU-RF-RTC was proposed to detect process shifts rapidly.The effectiveness of the proposed GRU-RF-RTC model is first evaluated using multivariate normal and nonnormal distribution datasets.Then,to prove the applicability of the proposed model in a realmanufacturing setting,the model was evaluated using real-world normal and non-normal problems.The results demonstrate that the proposed GRU-RF-RTC outperforms other methods in detecting process shifts quickly with the lowest average out-of-control run length(ARL1)in all synthesis and real-world problems under normal and non-normal cases.The experiment results on real-world problems highlight the significance of the proposed GRU-RF-RTC model in modern manufacturing process monitoring applications.The result reveals that the proposed method improves the shift detection capability by 42.14%in normal and 43.64%in gamma distribution problems.

Virtual sample generation for model-based prognostics and health management of on-board high-speed train control system

In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train control equipment.A virtual sample generation solution based on Generative Adversarial Network(GAN)is proposed to overcome this shortcoming.Aiming at augmenting the sample classes with the imbalanced data problem,the GAN-based virtual sample generation strategy is embedded into the establishment of fault prediction models.Under the PHM framework of the on-board train control system,the virtual sample generation principle and the detailed procedures are presented.With the enhanced class-balancing mechanism and the designed sample augmentation logic,the PHM scheme of the on-board train control equipment has powerful data condition adaptability and can effectively predict the fault probability and life cycle status.Practical data from a specific type of on-board train control system is employed for the validation of the presented solution.The comparative results indicate that GAN-based sample augmentation is capable of achieving a desirable sample balancing level and enhancing the performance of correspondingly derived fault prediction models for the Condition-based Maintenance(CBM)operations.

Management System Activities of the Operation and Utilization of GHARR-1

The Ghana Research Reactor-1 (GHARR-1) is a 34 kW low enriched uranium (LEU) Miniature Neutron Source Reactor (MNSR), tank-in-pool type and cooled by natural circulation under atmospheric pressure operating conditions. GHARR-1 is owned by Ghana Atomic Energy Commission (GAEC) and operated by National Nuclear Research Institute (NNRI), one of the institutes of GAEC. GHARR-1 is housed by Nuclear Reactors Research Centre (NRRC), one of the Centres of NNRI. Management/Administration, Radiation protection, Reactor operation and maintenance, Reactor utilization and Physical protection are the various systems/units that integrate to manage the activities of operation and utilization of GHARR-1 in addition to the quality assurance and quality control management system of the research reactor facility. The GHARR-1 which is currently in operation follows a robust maintenance culture adopted by the management system and this has made it possible to keep the reactor in operation with minimal interruption. The management system activities adopted at the Centre to ensure safety of the workers, public and the research reactor facility include authorization of the operation of the reactor for any experiments/modifications;providing material and financial resources for maintaining the research reactor facility;following standard procedures while carrying out Neutron Activation Analysis;participation in IAEA proficiency test;irradiation sites/positions characterization;following standard procedures while carrying out reactor operation and maintenance including reactor and pool water purification and other related activities;monitoring radiation levels in the controlled, supervised and uncontrolled areas of the research reactor facility as well as during reactor operation and maintenance;controlling the physical entry of the workers and public into the research reactor facility;and ensuring that the security structures provided to protect the reactor facility are functioning properly. The thorough knowledge on the functions of the various components that make up the electrical/electronic and control systems of the reactor has been observed to be important for continuous successful maintenance of the research reactor to keep the reactor in operation. This work provides some management system activities adopted to monitor the activities of the research reactor operation and utilization to guarantee safety of workers, public and the environment as well as to safeguard a continuous operation of the research reactor. These management system activities adopted among others, are in the form of Monitoring Forms provided for monitoring the activities of the research reactor operation and utilization in order to ensure standard procedures and specifications are followed and quality services are rendered to the public.

Application of ArtificialNeural Network to Real-Time Condition Monitoring Control and Usual Trouble Diagnosis during Driling

ＡｐｐｌｉｃａｔｉｏｎｏｆＡｒｔｉｆｉｃｉａｌＮｅｕｒａｌＮｅｔｗｏｒｋｔｏＲｅａｌ┐ＴｉｍｅＣｏｎｄｉｔｉｏｎＭｏｎｉｔｏｒｉｎｇＣｏｎｔｒｏｌａｎｄＵｓｕａｌＴｒｏｕｂｌｅＤｉａｇｎｏｓｉｓｄｕｒｉｎｇＤｒｉｌｉｎｇ＊ＳｈｉＹｕｓｈｅｎｇＤｅｐａ...

Management and Control of Outsourcing in Dispersed Network Manufacturing Systems

The trend of economic globalisation and advances in i nformation technology has led to the emergence of dispersed manufacturing system s as a form of the virtual organisation. New manufacturing strategy pays more at tention to the management of the total value chain and therefore puts emphasis o n outsourcing. In fact, outsourcing is an efficient way of utilizing available r esources and has become one key aspect of the manufacturing strategy. Improved d ecision and organization on outsourcing will result in cost production and short er lead-times. However, most concepts and practice of traditional outsourcing do not adapt to t he changing environment and meet increasing performance requirements. On the oth er hand, virtual organisations might display instability between pure outsourcin g and establishing alliance. Balance and trade-off between independent agents a nd creating alliance are thus required. Therefore, the purpose of this paper is to develop a model to support decision-making, management and control on outsou rcing in a dispersed network manufacturing system and to discuss several key iss ues that are relevant to the relationship between the agents of the network. Dev elopment of the model will deploy Applied System Theory and will be built on fou ndations of earlier research on industrial management such the theories of Outso urcing, Order Entry Points, Design of Organisations and Logistic Control. The is sues that will be addressed in this paper are: · The selection of suppliers and co-makers; · Communication between suppliers and clients; · The mechanisms for profit-sharing between agents; · The product data management to integrate the knowledge of the different agent s into product design. Industrial companies will benefit from this research by the practical methods an d implementation extending their business models beyond concepts for outsourcing and alliances. Additionally, the exploration will lead to proactive contributio n of manufacturing during engineering, which would improve management and contro l of dispersed manufacturing systems.

Research and Design of Network Management Construction Based on Mobile AGENT

The technical characters of mobile agent （MA） originated in the distributional artificial intelligence domain is introduced. A network management construction based on agent （NMCA） is then proposed. The NMCA structure features are elaborated in detail. A prototype design of NMCA is given by using the jKQML programming. The establishment of NMCA platform will be helpful to reduce the correspondence load of network management and improves the efficiency and the expansion ability of network management systems.

A Modification of SOM Network(SLFM) and Its Applications in Tool Wear Monitoring and Quality Control

In this paper, a Supervised Linear Feature Mapping(SLFM) algorithm, as a modification of the Kohonen Self Organizing Mapping (SOM),is proposed. The applications in cutting tool wear estimation and quality control and the comparison with a back propagation (BP) algorithm are discussed. The results show that the SLFM algorithm requires less training time and has higher accuracy compared with the BP algorithm. It might be a great potential approach to integrate multi sensor information in process control.

Software defined satellite networks:A survey

In recent years,satellite networks have been proposed as an essential part of next-generation mobile communication systems.Software defined networking techniques are introduced in satellite networks to handle the growing challenges induced by time-varying topology,intermittent inter-satellite link and dramatically increased satellite constellation size.This survey covers the latest progress of software defined satellite networks,including key techniques,existing solutions,challenges,opportunities,and simulation tools.To the best of our knowledge,this paper is the most comprehensive survey that covers the latest progress of software defined satellite networks.An open GitHub repository is further created where the latest papers on this topic will be tracked and updated periodically.Compared with these existing surveys,this survey contributes from three aspects:(1)an up-to-date SDN-oriented review for the latest progress of key techniques and solutions in software defined satellite networks;(2)an inspiring summary of existing challenges,new research opportunities and publicly available simulation tools for follow-up studies;(3)an effort of building a public repository to track new results.

What to Cache：Differentiated Caching Resource Allocation and Management in Information-Centric Networking

Information-centric networking(ICN) aims to improve the efficiency of content delivery and reduce the redundancy of data transmission by caching contents in network nodes. An important issue is to design caching methods with better cache hit rate and achieve allocating on-demand. Therefore, an in-network caching scheduling scheme for ICN was designed, distinguishing different kinds of contents and dynamically allocating the cache size on-demand. First discussing what was appropriated to be cached in nodes, and then a classification about the contents could be cached was proposed. Furthermore, we used AHP to weight different contents classes through analyzing users' behavior. And a distributed control process was built, to achieve differentiated caching resource allocation and management. The designed scheme not only avoids the waste of caching resource, but also further enhances the cache availability. Finally, the simulation results are illustrated to show that our method has the superior performance in the aspects of server hit rate and convergence.

A Controller-Based Architecture for Information Centric Network Construction and Topology management

Information-Centric Networking(ICN) has recently emerged as a result of the increased demand to access contents regardless of their location in the network services. This new approach facilitates content distribution as a service of the network with lower delay and higher security in comparison with the current IP network. Applying ICN in current IP infrastructure leads to major complexities. One approach to deploy ICN with less complexity is to integrate ICN with Software Defined Networking(SDN). The SDN controller manages the content distribution, caching, and routing based on the users' requests. In this paper, we extend these context by addressing the ICN topology management problem over the SDN network to achieve an improved user experience as well as network performance. In particular, a centralized controller is designed to construct and manage the ICN overlay. Experimental results indicate that this adopted topology management strategy achieves high performance, in terms of low failure in interest satisfaction and reduced download time compared to a plain ICN.

Interference management via access control and mobility prediction in two-tier heterogeneous networks

Abstract： Two-tier heterogeneous networks （HetNets）, where the current cellular networks, i.e., macrocells, are overlapped with a large number of randomly distributed femtocells, can potentially bring significant benefits to spectral utilization and system capacity. The interference management and access control for open and closed femtocells in two-tier HetNets were focused. The contributions consist of two parts. Firstly, in order to reduce the uplink interference caused by MUEs （macrocell user equipments） at closed femtocells, an incentive mechanism to implement interference mitigation was proposed. It encourages femtoeells that work with closed-subscriber-group （CSG） to allow the interfering MUEs access in but only via uplink, which can reduce the interference significantly and also benefit the marco-tier. The interference issue was then studied in open-subscriber-group （OSG） femtocells from the perspective of handover and mobility prediction. Inbound handover provides an alternative solution for open femtocells when interference turns up, while this accompanies with PCI （physical cell identity） confusion during inbound handover. To reduce the PCI confusion, a dynamic PCI allocation scheme was proposed, by which the high handin femtocells have the dedicated PCI while the others share the reuse PCIs. A Markov chain based mobility prediction algorithm was designed to decide whether the femtoeell status is with high handover requests. Numerical analysis reveals that the UL interference is managed well for the CSG femtocell and the PCI confusion issue is mitigated greatly in OSG femtocell compared to the conventional approaches.

Risk Management of Clinical Reference Dosimetry of a Large Hospital Network Using Statistical Process Control

Managing TG-51 reference dosimetry in a large hospital network can be a challenging task. The objectives of this study are to investigate the effectiveness of using Statistical Process Control (SPC) to manage TG-51 workflow in such a network. All the sites in the network performed the annual reference dosimetry in water according to TG-51. These data were used to cross-calibrate the same ion chambers in plastic phantoms for monthly QA output measurements. An energy-specific dimensionless beam quality cross-calibration factor, , was derived to monitor the process across multiple sites. The SPC analysis was then performed to obtain the mean, , standard deviation, σk, the Upper Control Limit (UCL) and Lower Control Limit (LCL) in each beam. This process was first applied to 15 years of historical data at the main campus to assess the effectiveness of the process. A two-year prospective study including all 30 linear accelerators spread over the main campus and seven satellites in the network followed. The ranges of the control limits (±3σ) were found to be in the range of 1.7% - 2.6% and 3.3% - 4.2% for the main campus and the satellite sites respectively. The wider range in the satellite sites was attributed to variations in the workflow. Standardization of workflow was also found to be effective in narrowing the control limits. The SPC is effective in identifying variations in the workflow and was shown to be an effective tool in managing large network reference dosimetry.

Monitoring and control technology of solar photovoltaic power generation system

In view of characteristics of solar photovoltaic (PV) power station such as the decentralized layout and massive monitoring and control information, a solar PV power generation monitoring and control system has been designed. The system is designed into three layers namely the sensor and actuator layer, the PLC field monitoring and control layer and the remote network monitoring and control layer. Through ZigBee wireless network, PROFIBUS and GPRS wireless network, the system makes the three layers exchange information rapidly, and the system supervises not only various operational parameters of the power generating system but also weather changes as a way to change the solar tracking strategy of the PV power generating system and reduce the operating energy consumption of the system. Through the hardware redundant design of PLC central controller and the upper computer, the solar PV power station can be more secure and reliable when running.

A Novel Outage Capacity Objective Function for Optimal Performance Monitoring and Predictive Fault Detection in Hybrid Free-Space Optical and RF Wireless Networks

This study develops an optimal performance monitoring metric for a hybrid free space optical and radio wireless network, the Outage Capacity Objective Function. The objective function—the dependence of hybrid channel outage capacity upon the error rate, jointly quantifies the effects of atmospheric optical impairments on the performance of the free space optical segment as well as the effect of RF channel impairments on the radio frequency segment. The objective function is developed from the basic information-theoretic capacity of the optical and radio channels using the gamma-gamma model for optical fading and Ricean statistics for the radio channel fading. A simulation is performed by using the hybrid network. The objective function is shown to provide significantly improved sensitivity to degrading performance trends and supports of proactive link failure prediction and mitigation when compared to current thresholding techniques for signal quality metrics.

Flow Management Mechanism in Software-Defined Network

Software-defined networking(SDN)is a paradigm shift in modern networking.However,centralised controller architecture in SDNimposed flow setup overhead issue as the control plane handles all flows regardless of size and priority.Existing frameworks strictly reduce control plane overhead and it does not focus on rule placement of the flows itself.Furthermore,existing frameworks do not focus on managing elephant flows like RTSP.Thus,the proposed mechanism will use the flow statistics gathering method such as random packet sampling to determine elephant flow and microflow via a predefined threshold.This mechanism will ensure that the control plane works at an optimum workload because the controller only manages elephant flows via reactive routing and rule placement respectively.Reactive routing has reduced link bandwidth usage below the pre-defined threshold.Furthermore,rule placement has increased average throughput and total transfer to 238%.Meanwhile,the data plane switches will be able to forward microflows via multipath wildcard routing without invoking controller in greater responding time by 85 ms faster in two Transmission Control Protocol(TCP)traffic and achieved 11%and 12%higher total transfer size and throughput respectively.Hence,the controller’s workload reduced significantly to 48%in two TCP traffic.

A Realistic ICT Network Design and Implementation in the Neighbourhood Area of the Smart Grid

The Smart Grid has three main characteristics, which are to some degree antagonistic. These characteristics are: provision of good power quality, energy cost reduction and improvement in the reliability of the grid. The need to ensure that they can be accomplished together demands a much richer ICT monitoring and control network than the current system. In this paper we particularly investigate the design and deployment of the ICT system in the urban environment, specifically in a university campus that is embedded in a city, thus it represents the Neighbourhood Area Network (NAN) level of the Smart Grid. In order to design an ICT infrastructure, we have introduced two related architectures: namely communications network architecture and a software architecture. Having access to the characteristics of a real NAN guides us to choose appropriate communication technologies and identify the actual requirements of the system. To implement these architectures at this level we need to gather and process information from environmental sensors (monitoring e.g. temperature, movement of people and vehicles) that can provide useful information about changes in the loading of the NAN, with information from instrumentation of the Power Grid itself. Energy constraints are one of the major limitations of the communication network in the Smart Grid, especially where wireless networking is proposed. Thus we analyse the most energy efficient method of collecting and sending data. The main contribution of this research is that we propose and implement an energy efficient ICT network and describe our software architecture at the NAN level, currently very underdeveloped. We also discuss our experimental results. To our knowledge, no such architectures have yet been implemented for collecting data which can provide the basis of Decision Support Tools (DSTs).

Wireless Sensor Network for Monitoring Maturity Stage of Fruit

In this letter, we present a wireless sensor network for monitoring the maturity stage of fruit. A dual-polari- zation coupled patch sensor, which is robust to environmental changes, was designed to operate at 2.45 GHz. It was attached to a Durian fruit for a period of days to measure the magnitude of mutual coupling corresponding mainly to the starch concentration of its pulp. Signal was transmitted from a sensor node, via tree nodes, to a master node that displays the variations occurring in the period. The maximum mutual coupling occurred at the maturity stage of 60% whereas the minimum occurred at 70%. These results demonstrate that this wireless sensor network can enable fruit growers to harvest their Durians at an appropriate time, providing a reliable quality control for export.

Research and Development of a Communication Monitor to a Distribution Management System

Based on the existed equipment (the power line carrier, optic fiber, twisted pair and wireless apparatus) being used to the same route in the current communication net of distribution management system (DMS), this paper presents a new kind of communication monitor DMS, which provides a communication monitoring interface and then by DMS, data transfer problem from field terminal unit to junction center station can be solved and the communication channels can also be supervised. At the same time, synthetically using computer communication, internet technology and database technology, this system can realize the real time monitoring and fault locating in the communication network.