Design Energy Efficient Water Utilization Systems Allowing Operation Split

This article deals with the design of energy efficient water utilization systems allowing operation split. Practical features such as operating flexibility and capital cost have made the number of sub operations an important parameter of the problem. By treating the direct and indirect heat transfers separately, target freshwater and energy consumption as well as the operation split conditions are first obtained. Subsequently, a mixed integer non-linear programming （MINLP） model is established for the design of water network and the heat exchanger network （HEN）. The proposed systematic approach is limited to a single contaminant. Example from literature is used to illustrate the applicability of the approach.

Synthesis of Water Utilization System Using Concentration Interval Analysis Method （ Ⅰ ） Non-Mass-Transfer-Based Operation

A strategy for water and wastewater minimization is developed for continuous water utilization systems involving fixed flowrate(non-mass-transfer-based)operations,based on the fictitious operations that is introduced to represent the water losing and/or generating operations and a modified concentration interval analysis(MCIA) technique.This strategy is a simple,nongraphical,and noniterative procedure and is suitable for the quick yields of targets and the identification of pinch point location.Moreover,on the basis of the target method,a heuristic-based approach is also presented to generate water utilization networks,which could be demonstrated to be optimum ones. The proposed approaches are illustrated with example problems.

Incorporating Network Coding into TCP Grounded on Network Utility Maximization in Multi-Radio Multi-Channel Wireless Mesh Networks

A new approach, named TCP-I2NC, is proposed to improve the interaction between network coding and TCP and to maximize the network utility in interference-free multi-radio multi-channel wireless mesh networks. It is grounded on a Network Utility Maxmization (NUM) formulation which can be decomposed into a rate control problem and a packet scheduling problem. The solutions to these two problems perform resource allocation among different flows. Simulations demonstrate that TCP-I2NC results in a significant throughput gain and a small delay jitter. Network resource is fairly allocated via the solution to the NUM problem and the whole system also runs stably. Moreover, TCP-I2NC is compatible with traditional TCP variants.

Tradeoff between utility and lifetime in energy-constrained wireless sensor networks

We study the tradeoff between network utility and network lifetime using a cross-layer optimization approach. The tradeoff model in this paper is based on the framework of layering as optimization decomposition. Our tradeoff model is the first one that incorporates time slots allocation into this framework. By using Lagrangian dual decomposition method, we decompose the tradeoff model into two subproblems： routing problem at network layer and resource allocation problem at medium access control （MAC） layer. The interfaces between the layers are precisely the dual variables. A partially distributed algorithm is proposed to solve the nonlinear, convex, and separable tradeoff model. Numerical simulation results are presented to support our algorithm.

Performance Enhancement and Utility Maximization for TCP in Wireless Mesh Networks

In Wireless Mesh Networks (WMNs),the performance of conventional TCP significantly deteriorates due to the unreliable wireless channel.To enhance TCP performance in WMNs,TCP/LT is proposed in this paper.It introduces fountain codes into packet reorganization in the protocol stack of mesh gateways and mesh clients.Furthermore,it is compatible with conventional TCP.Regarded as a Performance Enhancement Proxies (PEP),a mesh gateway buffers TCP packets into several blocks.It simultaneously processes them by using fountain encoders and then sends them to mesh clients.Apart from the improvement of the throughput of a unitary TCP flow,the entire network utility maximization can also be ensured by adjusting the scale of coding blocks for each TCP flow adaptively.Simulations show that TCP/LT presents high throughput gains over single TCP in lossy links of WMNs while preserving the fairness for multiple TCPs.As losses increase,the transmission delay of TCP/LT experiences a slow linear growth in contrast to the exponential growth of TCP.

A utility-optimal backoff algorithm for wireless sensor networks

A novel backoff algorithm in CSMA/CA-based medium access control (MAC) protocols for clustered sensor networks was proposed. The algorithm requires that all sensor nodes have the same value of contention window (CW) in a cluster, which is revealed by formulating resource allocation as a network utility maximization problem. Then, by maximizing the total network utility with constrains of minimizing collision probability, the optimal value of CW (Wopt) can be computed according to the number of sensor nodes. The new backoff algorithm uses the common optimal value Wopt and leads to fewer collisions than binary exponential backoff algorithm. The simulation results show that the proposed algorithm outperforms standard 802.11 DCF and S-MAC in average collision times, packet delay, total energy consumption, and system throughput.

Algorithmic Procedure to Design Water Utilization Systems Featuring Multiple Contaminants in Process Plants

This paper introduces a non-iterative algorithmic procedure to design water utilization networks with multiple contaminants in process plants. According to the water pinch analysis rules, the processes in water utilization systems were first divided into three groups, then water-supply priority algorithm was proposed. The results of case studies showed that the water networks designed by this method gave water consumption lower than that estimated by other approaches. In addition, the procedure was subject to no limitation on the problem scale.

Tricube Weighted Linear Regression and Interquartile for Cloud Infrastructural Resource Optimization

Cloud infrastructural resource optimization is the process of precisely selecting the allocating the correct resources either to a workload or application.When workload execution,accuracy,and cost are accurately stabilized in opposition to the best possible framework in real-time,efficiency is attained.In addition,every workload or application required for the framework is characteristic and these essentials change over time.But,the existing method was failed to ensure the high Quality of Service(QoS).In order to address this issue,a Tricube Weighted Linear Regression-based Inter Quartile(TWLR-IQ)for Cloud Infrastructural Resource Optimization is introduced.A Tricube Weighted Linear Regression is presented in the proposed method to estimate the resources(i.e.,CPU,RAM,and network bandwidth utilization)based on the usage history in each cloud server.Then,Inter Quartile Range is applied to efficiently predict the overload hosts for ensuring a smooth migration.Experimental results show that our proposed method is better than the approach in Cloudsim under various performance metrics.The results clearly showed that the proposed method can reduce the energy consumption and provide a high level of commitment with ensuring the minimum number of Virtual Machine(VM)Migrations as compared to the state-of-the-art methods.

Energy-Efficient Architecture and Technologies for Device to Device(D2D) Based Proximity Service

Considering that modern mobile terminals possess the capability to detect users' proximity,and offer means to directly communicate and share content with the people in close area,Device-to-Device(D2D) based Proximity Services(ProSe) have recently witnessed great development,which enable users to seek for and utilize relevant value in their physical proximity,and are capable to create numerous new mobile service opportunities.However,without a breakthrough in battery technology,the energy will be the biggest limitation for ProSe.Through incorporating the features of ProSe(D2D communication technologies,abundant built-in sensors,localization-dependent,and context-aware,etc.),this paper thoroughly investigates the energy-efficient architecture and technologies for ProSe from the following four aspects:underlying networking technology,localization,application and architecture features,context-aware and user interactions.Besides exploring specific energy-efficient schemes pertaining to each aspect,this paper offers a perspective for research and applications.In brief,through classifying,summarizing and optimizing the multiple efforts on studying,modeling and reducing energy consumption for ProSe on mobile devices,the paper would provide guide for developers to build energy-efficient ProSe.

On the QoS for ATM Networks Using a New Buffer Utilization Technique

A buffer sharing scheme need to meet many competing objectives like robustness to changes in traffic conditions, fairness, efficiency, implementation simplicity, etc. Of the existing techniques, Push Out (PO) is optimum in terms of overall cell loss performance, but its delay performance is worse than that of all other methods for the multiple space priority. Another scheme named Dynamic Threshold (DT) is robust and adaptive which has good delay performance. A hybrid technique named Dynamic Threshold wi...

Distributed rate allocation for elastic flows in concurrent multipath transfer

Concurrent multipath transfer（CMT） using stream control transmission protocol（SCTP） multihoming has become an appealing option to increase the throughput and improve the performance of increasingly bandwidth-hungry applications.To investigate the rate allocation for applications in CMT,this paper analyzes the capacities of paths shared by competing sources,then proposes the rate allocation model for elastic flows based on the framework of network utility maximization（NUM）.In order to obtain the global optimum of the model,a distributed algorithm is presented which depends only on local available information.Simulation results confirm that the proposed algorithm can achieve the global optimum within reasonable convergence times.

Two-dimensional gain cross-grating based on spatial modulation of active Raman gain

Based on the spatial modulation of active Raman gain,a two-dimensional gain cross-grating is theoretically proposed.As the probe field propagates along the z direction and passes through the intersectant region of the two orthogonal standingwave fields in the x-y plane,it can be effectively diffracted into the high-order directions,and the zero-order diffraction intensity is amplified at the same time.In comparison with the two-dimensional electromagnetically induced cross-grating based on electromagnetically induced transparency,the two-dimensional gain cross-grating has much higher diffraction intensities in the first-order and the high-order directions.Hence,it is more suitable to be utilized as all-optical switching and routing in optical networking and communication.

Upstream Channel Utilization of CSMA/CD-Based Ethernet over Passive Optical Networks

We demonstrate that an asynchronous CSMA/CD protocol with an optical loop-back star coupler can achieve high upstream channel utilizatbn in an Ethernet PON, readily supporting a large installed base of Ethernet 10BaseT and 100BaseT interfaces.

UMR: A utility-maximizing routing algorithm for delay-sensitive service in LEO satellite networks

This paper develops a routing algorithm for delay-sensitive packet transmission in a low earth orbit multi-hop satellite network consists of micro-satellites. The micro-satellite low earth orbit （MS-LEO） network endures unstable link connection and frequent link congestion due to the uneven user distribution and the link capacity variations. The proposed routing algorithm, referred to as the utility maximizing routing （UMR） algorithm, improve the network utility of the MS-LEO network for carrying flows with strict end-to-end delay bound requirement. In UMR, first, a link state parameter is defined to capture the link reliability on continuing to keep the end-to-end delay into constraint; then, on the basis of this parameter, a routing metric is for- mulated and a routing scheme is designed for balancing the reliability in delay bound guarantee among paths and building a path maximizing the network utility expectation. While the UMR algo- rithm has many advantages, it may result in a higher blocking rate of new calls. This phenomenon is discussed and a weight factor is introduced into UMR to provide a flexible performance option for network operator. A set of simulations are conducted to verify the good performance of UMR, in terms of balancing the traffic distribution on inter-satellite links, reducing the flow interruption rate, and improving the network utility.

Multi-radio access based bandwidth allocation strategy for video communication in heterogeneous wireless networks

In order to make full use of the radio resource of heterogeneous wireless networks（HWNs） and promote the quality of service（Qo S） of multi-homing users for video communication, a bandwidth allocation algorithm based on multi-radio access is proposed in this paper. The proposed algorithm adopts an improved distributed common radio resource management（DCRRM） model which can reduce the signaling overhead sufficiently. This scheme can be divided into two phases. In the first phase, candidate network set of each user is obtained according to the received signal strength（RSS）. And the simple additive weighted（SAW） method is employed to determine the active network set. In the second phase, the utility optimization problem is formulated by linear combining of the video communication satisfaction model, cost model and energy efficiency model. And finding the optimal bandwidth allocation scheme with Lagrange multiplier method and Karush-Kuhn-Tucker（KKT） conditions. Simulation results show that the proposed algorithm promotes the network load performances and guarantees that users obtain the best joint utility under current situation.

NIBU: a new approach to representing and analysing interior utility networks within 3D geo-information systems

Facility management departments’responsibilities include monitoring and maintenance of building infrastructure,such as water,gas or electricity.Very often these tasks are completed using paper maps,which make integrated analysis of networks challenging.Ability to consider interior network structure and provide semantic and connectivity information supporting the required analysis operations are thus crucial.This paper presents an approach relying on Building Information Model(BIM)as a data source for obtaining information about interior utilities.The semantic and connectivity information of BIM is mapped onto a new model called Network for Interior Building Utilities(NIBU).NIBU is based on the semantic categorisation of utilities,and the spatial functions that have to be performed.Three scenarios(‘maintenance operation’,‘emergency response’and‘inspection operation’)are developed to test the proposed approach.The model and its functions are implemented in spatial DBMS.The model is populated directly from a BIM server applying an Industrial Foundation Class(IFC)parser developed in-house.Five analysis functions are implemented to support spatial operations:trace upstream,trace downstream,find ancestors,find source and find disconnected.The investigation proves that BIM provides both the required semantics and attributes,and connectivity information that can facilitate analysis of interior utility networks.NIBU provides a simple yet flexible way to manage interior network information,which can be integrated into Digital Earth.

Joint Bandwidth Allocation and Path Selection in WANs with Path Cardinality Constraints

In this paper,we study the joint bandwidth allocation and path selection problem,which is an extension of the well-known network utility maximization(NUM)problem,via solving a multi-objective minimization problem under path cardinality constraints.Specifically,such a problem formulation captures various types of objectives including proportional fairness,average delay,as well as load balancing.In addition,in order to handle the"unsplittable flows",path cardinality constraints are added,making the resulting optimization problem quite challenging to solve due to intrinsic nonsmoothness and nonconvexity.Almost all existing works deal with such a problem using relaxation techniques to transform it into a convex optimization problem.However,we provide a novel solution framework based on the linearized alternating direction method of multipliers(LADMM)to split the original problem with coupling terms into several subproblems.We then derive that these subproblems,albeit nonconvex nonsmooth,are actually simple to solve and easy to implement,which can be of independent interest.Under some mild assumptions,we prove that any limiting point of the generated sequence of the proposed algorithm is a stationary point.Numerical simulations are performed to demonstrate the advantages of our proposed algorithm compared with various baselines.

NIBU:An Integrated Framework for Representing the Relation Among Building Structure and Interior Utilities in Micro-Scale Environment

This paper describes a framework for modeling interdependencies between different network systems and building structures.It provides an approach for the integrated analysis of interior building utilities by describing a framework to model and simulate infrastructure interdependencies and their complex behaviors.It is a graph-based spatial model that can support use cases such as providing the location and specifications of interior utilities to a technician who wants to perform a maintenance operation.This location could be needed for maintenance or replacement,or to investigate the result of damage to the building structure on another utility network,or to estimate the effect of different maintenance operations in different locations along utilities service systems.The model accounts for two important aspects:first,the relationship between interior utilities and building elements or spaces and second,the building hierarchy structure to which the utilities network is related.A proper hierarchy of the building is developed which supports the generation of human-oriented descriptions of interior utilities,where a method for partitions of large building element and spaces as well as a method to reference a network element to another building are developed.The connection of the different utilities network systems and buildings are generated using joints,which are based on a containment relation.An example is presented which shows the effectiveness of this approach for supporting maintenance operations,as well as the independences between the maintenance operation location and the other network systems.The paper presents the data model and explains the links with current 3D building model standards.