A novel SVPWM strategy considering neutral-point potential balancing for three-level NPC inverter

This paper proposes a novel SVPWM （space vector pulse width modulation） strategy for the three-level neutral-point-clamped voltage source inverter, based on the particular disposition of all the redundant voltage vectors. The new modulation approach shows superior performance for harmonic voltage and balancing control of neutral-point potential compared to the popular eight-stage centered SVPWM. It realizes suppression of inverter neutral-point potential variation by accurately modifying redundant factor of small vectors pairs, only requiring information of DC-link capacitor voltages and three-phase load currents. This is convenient to apply and is compatible of digital computer realization. Feasibility of the proposed control approach is verified by simulation and experimental results.

Low-complexity model predictive control of a four-level active neutral point clamped inverter without weighting factors

The four-level active neutral point clamped(ANPC)inverter has become increasingly widely used in the renewable energy indus-try since it offers one more voltage level without increasing the total number of active switches compared to the three-level ANPC inverter.The model predictive current control(MPCC)is a promising control method for multi-level inverters.However,the conven-tional MPCC suffers from high computational complexity and tedious weighting factor tuning in multi-level inverter applications.A low-complexity MPCC without weighting factors for a four-level ANPC inverter is proposed in this paper.The computational burden and voltage vector candidate set are reduced according to the relationship between voltage vector and neutral point voltage balance.The proposed MPCC shows excellent steady-state and dynamics performances while ensuring the neutral point voltage balancing.The efficacy of the proposed MPCC is verified by simulation and experimental results.

Improved VSVPWM Modulation Method for Three-level NPC Inverter in Rural Power Grid

With the acceleration of agricultural electrification,a lot of nonlinear and shock loads appear in the rural power grid,and the resulting harmonic and reactive currents pollute the rural power grid more and more seriously.To solve the above problem,three-level neutral point clamped(NPC)inverters have been widely used,but their development is greatly restricted by the defect of neutral point voltage imbalance.In this paper,an improved virtual space vector pulse width modulation(VSVPWM)was proposed.Firstly,the mathematical models of various space vectors were established,and the influence of various space vectors on neutral point voltage was analyzed.The sum of the vector current at the neutral point was zero and the voltage control at the neutral point was completed by.introducing the time offset into different switching times of the redundant small vector.This method was simple in design and avoided the redundant calculation of the traditional VSVPWM method and tedious switch sequence design.This balancing control strategy could greatly reduce the influence of virtual vectors on neutral point voltage and effectively control the low-frequency oscillation of neutral point voltage.The validity of the method was verified by establishing a matlab simulation model.

A Study of DTC-Power Electronic Cascade Fed by Photovoltaic Cell-Three-Level NPC Inverter

This paper proposes a high performance three-level inverter Neutral Point Clamped (NPC) structure for photovoltaic system. The proposed configuration which can boost the low voltage of photovoltaic (PV) array, can also convert the photovoltaic DC power into high quality AC power. Attention has been paid to the problem of neutral point potential variation. In this way, a Direct Torque Control (DTC) technique has been applied and the estimated value of the Neutral Point Potential (NPP) is used, which is calculated by motor currents. This control strategy uses the redundancy presented by the inverter for selecting appropriate switching state through a switching table to achieve the control of NPP. This study shows the effect of the stability problem of the DC voltages and good static and dynamic performances were obtained in simulation of the proposed cascade “photovoltaic cell-three-level NPC VSI-induction motor”.

Adaptive Neuro Fuzzy Inference System Based Decoupled Control for Neutral Point Clamped Multi Level Inverter Fed Induction Motor Dri

The presence of an integrator in a reference model of a rotor flux-based model reference adaptive system(RF-MRAS)and non-linearity of the inverter in the output voltage degrade the speed response of the sensorless operation of the electric drive system in terms of DC drift,initial value issues,and inaccurate voltage acquisition.To improve the speed response,a compensating voltage component is supplemented by an amending integrator.The compensating voltage is a coalition of drift and offset voltages,and reduces DC drift and initial value issues.During low-speed operation,inaccurate voltage acquisition distorts the stator voltage critically,and it becomes considerable when the stator voltage of the machine is low.Implementing a three-level neutral point clamped inverter in speed-sensorless decoupled control of an induction motor improves the performance of the drive with superior quality of inverter output voltage.Further,the performance of the induction motor drive is improved by replacing the proportional-integral(PI)controller in the adaption mechanism of RF-MRAS with an adaptive neuro-fuzzy inference system(ANFIS)controller.A prototype model of the three-level neutral point clamped inverter(3L-NPC)-fed induction motor drive is fabricated in a laboratory,and its performance for a RF-MRAS,modified RFMRAS,and modified RFMRAS using ANFIS are compared using different benchmark tests.

Model predictive control of three-level active front-end converter with low switching frequency

In medium voltage-high power(MV-HP)applications,the high switching frequency of power converter will result in unnecessary energy losses,which directly affect efficiency.To resolve this issue,a novel finite control set-model predictive control(FCS-MPC)with low switching frequency for three-level neutral point clamped-active front-end converters(NPC-AFEs)is proposed.With this approach,the prediction model of three-level NPC-AFEs is established inα-βreference frame,and the control objective of low average switching frequency is introduced into a cost function.The proposed method not only achieves the desired control performance under low switching frequency,but also performs the efficient operation for the three-level NPC-AFEs.The simulation results are provided to verify the effectiveness of proposed control scheme.

电容电压平衡的四电平有源中性点钳位逆变器的改进模型预测电流控制

多电平有源中点钳位(ANPC)逆变器具有功率器件电压应力小、电流谐波低和器件损耗可调控等优点,被广泛应用于工业驱动中。针对四电平ANPC(4L-ANPC)逆变器的控制与调制研究相对较少,现有的调制方案实现复杂,中点电压(NPV)控制难度较大。因此,该文针对三相4L-ANPC逆变器,提出一种改进的有限集模型预测电流控制(FS-MPCC)算法,避免了复杂的调制过程。首先,使用仅包含电流误差的代价函数对位于六边形顶点的6个大电压矢量进行寻优;其次,对参与第一步寻优的大矢量划分扇区,使用包含电流误差和电容电压误差的代价函数对最优大矢量所在扇区的所有电压矢量滚动寻优,得到目标电压矢量并作用于逆变器;最后,仿真和实验结果表明,与传统的FS-MPCC相比,所提方法在降低系统计算负担的同时,还具有较好的控制性能和电容电压平衡能力。

基于SHEPWM的三电平三相逆变器中点电位主动平衡控制策略

在大功率系统中,常采用特定次谐波消除脉宽调制(SHEPWM)以降低系统的开关损耗。针对三电平中点钳位(NPC)型三相逆变器在SHEPWM下的中点电位偏移问题,分析SHEPWM下逆变器输出相电压基波与3次谐波在不同电压相位范围内对中点电位的影响,设计两种在基波周期内对中点电位总充放电效果相反的开关角组合方案,并提出一种通过测量中点电位偏移值及中点电位滞环控制,选择不同的开关角组合方案进行调制的中点电位主动平衡控制策略。实验结果验证了所提出方法的实用性及有效性。

基于SVPWM补偿优化的三电平NPC并网逆变器容错控制

为保证并网系统中三电平中点箝位(neutral point clamped,NPC)型并网逆变器单相桥臂短路或断路故障后持续运行,提出一种基于空间矢量脉宽调制(space vector pulse width modulation,SVPWM)的优化补偿型低共模电压容错控制策略。首先,通过分析故障后八开关三相逆变器(eight switch three phase inverters,ESTPI)拓扑开关状态对应的共模电压大小,确定参考电压矢量合成规则;然后,通过一个基波周期内中点电流情况分析中点电位波动机理,进而对空间矢量合成进行调节补偿;最后,设计低通滤波器和滞环控制器进一步对补偿进行优化调整,保证并网电流质量的同时有效抑制了直流母线中点电位偏移。仿真结果表明,该容错控制策略能够实现三电平NPC并网逆变器单相桥臂故障后并网系统的稳定可靠运行,每个基波周期有三分之一时间的共模电压得到改善,优化补偿后的并网电流质量显著提高,且在并网电流突变时具备良好的控制特性。

基于自适应滑模观测器的中点钳位型三电平并网逆变器开关管和电流传感器故障诊断

为提高中点钳位型三电平(3L-NPC)并网逆变器故障诊断的准确性和可靠性,针对其开关管开路故障和电流传感器故障,提出一种基于自适应滑模观测器的开关管开路故障和电流传感器故障同时诊断方法。该方法首先针对3L-NPC并网逆变器,设计一种收敛速度快且能显著抑制抖振的自适应滑模观测器来精确估计正常状态下的三相电流值;其次,利用实际电流和估计电流设计了故障检测变量;同时,利用实际三相电流之和以及估计三相电流之和来区分开关管故障和电流传感器故障;在此基础上,构造开关管故障定位变量和电流传感器故障识别变量,实现开关管开路故障的准确定位以及电流传感器故障类型的快速识别。实验结果验证了该文所提诊断算法的有效性和鲁棒性。

Impedance Modeling and Stability Analysis of a Three-phase Three-level NPC Inverter Connected to the Grid

The interaction between grid-connected inverters and the grid may cause stability issues,and compromise the reliable operation of the inverters.This study investigates the stability of a three-level neutral point clamped(NPC)inverter connected to the grid using impedance-based methods.Because the impedance model of a three-phase three-level NPC inverter has not yet been reported,this study fills the literature gap by analyzing the influence of three-level DC-side neutral point control on the impedance characteristics.By fully considering the DC bus dynamics and DC voltage control loop,and the current loop and phase-locked loop(PLL),the admittance model of a three-phase three-level NPC inverter is established and verified by simulation.Additionally,in the stability analysis of a threelevel NPC inverter grid-connected system,the frequency coupling introduced by the PLL and DC bus dynamics is included with the help of an established admittance model.The stability of the grid-connected system under different grid short circuit ratios(SCR)and operating power levels is analyzed according to the Nyquist stability criterion.The experimental results revealed that the established impedance model of the three-phase three-level NPC inverter can properly represent the stability of this system.

Adaptive perturb and observe maximum power point tracking with current predictive and decoupled power control for gridconnected photovoltaic inverters

In order to improve maximum power point tracking(MPPT) performance, a variable and adaptive perturb and observe(P&O)method with current predictive control is proposed. This is applied in three-phase threelevel neutral-point clamped(NPC) photovoltaic(PV)generation systems. To control the active power and the reactive power independently,the decoupled power control combined with a space vector modulation block is adopted for three-phase NPC inverters in PV generation systems.To balance the neutral-point voltage of the three-phase NPC grid-connected inverter, a proportional and integral control is used by adj usting the dwell time of small voltage vectors. A three-phase NPC inverter rated at 12 kVA was established. The performance of the proposed method was tested and compared with the fixed perturbation MPPT algorithm under different conditions. Experimental results confirm the feasibility and advantages of the proposed method.

Unified power quality conditioner based on a three-level NPC inverter using fuzzy control techniques for all voltage disturbances compensation

This paper presents a novel and efficient control scheme for unified power quality conditioner （UPQC） based on three-level neutral point clamped （NPC） inverter using fuzzy logic techniques. The proposed UPQC is capable of mitigating source current harmonics and compensate all voltage disturbances such as voltage sags, swells, unbalances and harmonics. It is designed by the integration of series and shunt active filters （AFs） sharing a common DC bus capacitor. The DC voltage is maintained constant using proportional integral voltage controller. The synchronous reference frame （SRF） theory is used to get the reference signals for shunt active power filters （APFs） and the power reactive theory （p-q theory） for series APFs. The shunt and series APF reference signals derived from the control algorithm and sensed signals are injected in two controllers to generate switching signals. To improve the UPQC capability, fuzzy logic techniques are introduced to control the series APF. The performances of the proposed UPQC system are evaluated in terms of power factor correction, mitigation of voltage or current harmonics and all other voltage disturbances compensation using Matlab-Simulink software and SimPowerSystem toolbox. The simulation results illustrate the performance of the proposed UPQC at the common connection point of the nonlinear load to improve the power energy quality.

基于快速MPC的三相LCL并网NPC逆变器

针对三相LCL并网逆三电平中点钳位(Neutral Point Clamped,NPC)逆变器中有限集模型预测控制(Finite Control Set-Model Predictive Control,FCS-MPC)计算量大和控制速度慢导致NPC逆变器性能变差的问题,设计了一种快速模型预测控制方法。通过改变快速模型预测控制中参考电流电角度控制逆变器输出电流的相位,实现入网电流与电网同步;通过在冗余短矢量中选择合适的短矢量,实现直流侧中点电压平衡,减少计算量;通过缩小计算扇区,使快速模型预测控制仅在当前最优输出电压矢量附近进行寻优计算,进一步减少计算量。在MATLAB/SIMULINK中搭建了三相LCL并网NPC逆变器仿真模型,仿真结果验证了上述控制方法的快速性和可行性,运算速度提高了18.31%,入网电流总谐波失真(Total Harmonic Distortion,THD)值减少了2.38%。

基于零序电压注入的三电平NPC逆变器中点电位平衡控制方法

针对三电平中点箝位(NPC)逆变器的中点电位平衡控制问题,该文建立了基于零序电压注入的中点电位平衡控制模型,提出了所需注入零序电压的准确解析计算方法,并在此基础上提出了“预估-校验-修正”的实时控制算法。根据解析汁算结果,分析了中点电位平衡控制所受的限制,及由此决定的中点电位完全可控区域。针对6kV/1800kVA三电平调速系统的仿真结果表明所提算法是正确且有效的。

基于虚拟空间矢量的三电平NPC逆变器中点电压平衡控制方法

针对三电平中点钳位逆变器在不同的负载条件下,传统的最近三矢量合成方法中点电压存在不能平衡的区域,利用基于虚拟空间矢量的调制方法,当输出三相电流之和为零时,能实现对中点电压的完全控制。为了在扇区切换时输出矢量平稳过渡,提出了在每个大区内全部采用相同首发正小矢量或负小矢量的方法。构建了三电平中点钳位型逆变器实验平台,对基于虚拟空间矢量的三电平NPC逆变器中点电压平衡控制方法的有效性进行了验证。

NPC逆变器SHE-PWM开关角度的计算方法研究

以应用于高压变频调速装置中的三电平中点嵌位(Neutral Point Clamped)逆变器为研究对象,对特定消谐技术(Selected Harmonic Elimination PWM)的应用进行了分析与研究;针对用数值方法求解SHE-PWM开关角度时非线性方程组计算初值选择困难的情况,给出了采用解轨迹微分预估初值的计算方法,并总结了调制比m 0时的开关角度解初值公式;实际计算结果表明:该文提出的方法在数值计算中可以得到快速收敛和准确的结果,并通过计算结果分析了SHE-PWM技术应用于NPC逆变器时所能达到的最大调制比,且其计算结果得到实验验证。

高效率中点钳位型光伏逆变器拓扑比较

光伏逆变器是太阳能光伏发电系统的核心部件之一。为了提高太阳辐射能的利用效率,降低光伏发电的成本,高效率的光伏逆变器拓扑已成为近年来的研究热点。中点钳位型(NPC)三电平电路拓扑由于具有开关损耗小、电磁干扰(EMI)小、光伏阵列对地杂散电容上无共模漏电流、所需滤波电感小等优点,非常适用于单相光伏逆变器。本文对三种典型的三电平NPC拓扑(二极管NPC、有源NPC(ANPC)和Conergy NPC)进行了全面深入的比较分析,包括调制原理、功率损耗分布、器件成本和性能特点,并通过实验测试了三种拓扑的效率。研究结果表明:①Conergy NPC的效率在三种拓扑中最高,且所用器件数最少;②有源NPC的功率损耗分布可以灵活调节,有利于大功率应用场合的散热设计,但其控制比较复杂,且器件成本在三种拓扑中最高;③二极管NPC拓扑的功率损耗分布不易调节,不利于大功率应用场合的散热设计。

中点钳位非隔离全桥光伏并网逆变器

针对光伏发电系统对非隔离逆变电路的需求,提出构成一类中点钳位非隔离全桥光伏并网逆变器的2种基本开关单元:中点钳位正单元(positive-neutral point clamped cell,P-NPCC)和中点钳位负单元(negative-neutral point clampedc ell,N-NPCC)。提出由2种基本单元构造中点钳位全桥逆变器拓扑的生成机理和推演方法,按照该方法可以得到现有的中点钳位非隔离全桥光伏并网逆变器拓扑,如oH5、FB-DCBP以及一族新的中点钳位非隔离全桥并网逆变器拓扑。以所提PN-NPC拓扑为例详细分析了其工作原理,并实验比较了PN-NPC和Heric拓扑的变换效率和共模特性。所提拓扑的共模电压为恒定值,且其变换效率和共模特性均优于Heric拓扑。

二极管箝位型三电平逆变器控制系统研究

该文对二极管箝位型三电平逆变器的控制系统进行研究。为了对输出电压的波形进行控制,该文建立了三电平逆变器的数学模型,使用输出电压瞬时值控制系统来获得高质量的输出电压波形。中点平衡问题是三电平逆变器的一个固有问题,该文对此进行了深入探讨,并提出了一种基于各相桥臂输出电流方向和中点波动方向检测的中点平衡控制方法。实验结果验证了控制方案的正确性和可行性。