Research on the Mechanism and Strategy of Equity Investment Driving the Transformation of New Material Innovation Achievements

Under the wave of global technological revolution,the new materials industry is facing difficulties in innovation and transformation.Equity investment has become a key driving force due to its flexible mechanism,risk sharing,and deep participation.Based on introducing the current development status of China’s new materials industry,this article reveals the mechanism of equity investment in financial support,risk management,incentive constraints,and resource integration.The article proposes optimization strategies,such as building an information-sharing mechanism and a diversified investment fund system,to promote the high-quality development of the new materials industry driven by innovation and provide strategic guidance for policymakers,investors,and enterprises.

Copper-Free Resin-Based Braking Materials:A New Approach for Substituting Copper with Fly-Ash Cenospheres in Composites

Copper particles emitted from braking have become a significant source of environmental pollution.However,copper plays a crucial role in resin-based braking materials.Developing high-performance braking materials without copper has become a significant challenge.In this paper,the resin-based braking materials were filled with flyash cenospheres to develop copper-free braking materials.The effects of fly-ash cenospheres on the physical properties,mechanical and friction and wear properties of braking materials were studied.Furthermore,the wear mechanism of copper-free resin-based braking materials filled with fly-ash cenospheres was discussed.The results indicate that the inclusion of fly-ash cenospheres in the braking materials improved their thermal stability,hardness and impact strength,reduced their density,effectively increased the friction coefficient at medium and high temperatures,and enhanced the heat-fade resistance of the braking materials.The inclusion of fly-ash cenospheres contributed to the formation of surface friction film during the friction process of the braking materials,and facilitated the transition of form from abrasive wear to adhesive wear.At 100-350℃,the friction coefficient of the optimal formulation is in the range of 0.57-0.61,and the wear rate is in the range(0.29-0.65)×10^(-7) cm^(3)·N^(-1)·m^(-1),demonstrating excellent resistance to heat-fade and stability in friction coefficient.This research proposes the use of fly-ash cenospheres as a substitute for environmentally harmful and expensive copper in brake materials,which not only improves the performance of braking materials but also reduces their costs.

High‑Entropy Electrode Materials:Synthesis,Properties and Outlook

High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Defect Engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage market.However,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical applications.Defect engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for RMBs.In this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further presented.Then,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are discussed.The applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also summarized.Finally,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

Application of Environment-Friendly Building Materials in the New Countryside

Due to the high cost of environment-friendly materials and limited funds for the new countryside construction,it is the principal contradiction in the application of environment-friendly materials to satisfy the demands of both environment protection and cost reduction.The authors proposed that the influence ranking of these materials on environment should be clarified first to settle this contradiction,that is,to choose energy-conserving and environment-friendly materials within the limit of expenditure.By comparing the energy consumption,shock resistance,economic efficiency and social acceptability of wall materials,the influence ranking was given as below:hollow concrete block < lime-sand brick < baked chamotte brick;by analyzing the advantages and disadvantages of floor and roof concrete materials,as well as attentions for reducing negative impacts,the order of their influence was given as below:precast concrete trough plate < precast hollow strength concrete plate < cast-in-place concrete plate < cast-in-place brick-concrete plate;suitable materials for door and window frameworks were concluded,the influence order of wall and floor decoration materials on environment was given as:bare walls without plastering < walls of stable soil plastering < walls of cement-water plastering < walls of lime plastering;concrete for the overall decoration < parquet floor < tile floor < terrazzo floor;and 7 heat retardation materials were suggested for the construction of new countryside.

A new electromagnetic functional material composed of metallic hollow micro-spheres

This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micrograph taken by a scanning electron microscope showsthe microstructures of the materials in detail. Scattering parameters of the waveguide sample holderfilled with the materials have been obtained over X band. The electromagnetic parameters computedfrom the measured S parameters show that the material with metallic hollow spheres has as highrelative permeability μ'_r as 19.0 with about 0.6 magnetic loss tangent over the whole bandwidth.Compared to the material with non-metallic spheres, the permeability μ'_r and the magnetic losstangent μ'_r increase greatly, while the permittivity remains lower than 1.8.

Theoretical prediction of effective elastic constants for new intermetallic compound porous material

Based on microstructure analysis of the new Ti-A1 intermetallic compound porous material, a micromechanics model of heterogeneous Plateau porous structure was established and calculation formulas of elastic constants （including effective elastic modulus, effective shear elastic modulus and effective Poisson ratio） were derived by the energy method for this porous material. Calculation results show that both the effective elastic modulus and effective shear elastic modulus increase with the increase of the relative density while the effective Poisson ratio decreases. Compared with the currently-existing hexagonal honeycomb model and micromechanics model of composite materials, the micromechanics model of heterogeneous Plateau porous structure in this study is more suitable for characterizing the medium-density porous material and more accurate for predicting the effective elastic constants of the medium-density porous material. Moreover, the obtained explicit expressions of the effective elastic constants in term of the relative density rather than the microstructural parameters for the uniform and regular Plateau porous structure are more convenient to engineering application.

Application of New Slope Greening Technology——Reinforced Organic-Material and Plant Seeds Spraying

The research introduced the flowchart of organic-material and plant seeds spraying and a case of ＆quot;Dasi＆quot; Highway, the highway from Daxing to Sinan in Guizhou Province, a part of a National Highway from Hangzhou to Ruili, cal ed Hangrui Highway, slope protection. The flowchart included slope cleaning, net preparation, anchor fixation, adding vegetation-growth plate, spraying organic materi-als, coverage of non-woven fabrics, and maintenance. The technique is proved much efficient in protecting and greening road sideslopes consisting of weathered rocks or hard rocks, which provides a solution for abrupt slope greening technology.

交互式数字叙事:加拿大Writing New Body Worlds阅读治疗新探索

文章基于相关研究文献与语料,对加拿大WNB阅读治疗实践进行梳理与归纳。WNB首次使用交互式数字叙事技术,构建面向公众的阅读治疗平台,以其交互式特征,融合了阅读和治疗引导两个过程,提供可访问的非临床方式,可面向大规模人群实现预防性健康干预。基于数据与计算的精准化阅读治疗是数字人文视角下的新变革,更具推广应用价值;以在线阅读平台建设为依托,推进实施平台化的阅读和治疗应成为未来发展方向之一;基于阅读形态与体验因技术赋能而改变的现状,图书馆应发挥引领作用,积极收集、创建或协助创建数字故事,推进阅读推广、服务与治疗的融合性发展,成为社区建设促进者、历史欣赏者和社区参与倡导者,也使阅读借助交互式数字叙事这一新载体,更好地发挥变革的力量,促进健康与幸福。

A new clay-cement composite grouting material for tunnelling in underwater karst area

A new clay-cement composite grouting material (CCGM) for tunnelling in underwater karst area was developed through the excellent synergistic interactions among cement, clay, meta-aluminate and lignin. The probable formation mechanism of the material was proposed based on a series of experimental tests. The results show that with an optimal mass ratio (2:1:1:0.024) for water, cement, clay and additives, the obtained CCGM displayed an excellent grouting performance for karst in an underwater condition. Compared with neat cement grouts and clay-cement grouts, CCGM has faster gel time, lower bleeding rate and bulk shrinkage rate, greater initial viscosity, and a strong resistance to water dispersion. A successful engineering application indicates that CCGM not only fulfils a better grouting performance for karst in underwater conditions but also reduces the engineering cost and environmental pollution.

Two-dimensional material separation membranes for renewable energy purification, storage, and conversion

The current energy crisis has prompted the development of new energy sources and energy storage/conversion devices. Membranes, as the key component, not only provide enormous separation potential for energy purification but also guarantee stable and high-efficiency operation for rechargeable batteries and fuel cells. Remarkably, two-dimensional(2D) material separation membranes have attracted intense attention on their excellent performance in energy field applications, owing to high mechanical/chemical stability, low mass transport resistance, strict sizeexclusion, and abundant modifiable functional groups. In this review, we concentrate on the recent progress of 2D membrane and introduce 2D membranes based on graphene oxide(GO), MXenes, 2D MOFs, 2D COFs, and 2D zeolite nanosheets, which are applied in membrane separation(H2 collection and biofuel purification) and battery separators(vanadium flow battery, Li–S battery, and fuel cell). The mass transport mechanism, selectivity mechanism, and modification methods of these 2D membranes are stated in brief, mainly focusing on interlayer dominant membranes(GO and MXenes) and pore dominant membranes(MOFs, COFs, and zeolite nanosheets). In conclusion, we highlight the challenges and outlooks of applying 2D membranes in energy fields.

New Sr Isotope Evidence to Support the Material Source of the Mengyejing Potash Deposit in the Simao Basin from Ancient Marine Halite or Residual Sea

Objective The Mengyejing potash deposit in the Simao Basin is the only producing area of solid potash at present in China. There is still controversy about the material source and distribution of the potash in this deposit （Shen Lijian et al., 2017）, which has influenced not only the prospecting direction and efficiency but also the understanding of the control of Tethys tectonic evolution on the formation and distribution of the mineral resources. This work analyzed the Sr isotope geochemical characteristics of evaporites from core samples in the well MZK-3 in order to further clarify the material source and to explore the potash distribution in the Simao Basin.

Characterization of Elastic Modulus of Granular Materials in a New Designed Uniaxial Oedometric System

A simple uniaxial oedometric system is developed to test the elastic modulus of granular materials. The stress- strain relationship is first measured under conditions of uniaxial compression with additional lateral stress and strain, then the elastic modulus of the material is determined by the linear fitting method. It is found that the modulus is positively correlated to the grain size and negatively correlated to the container size. Arching and dragging are revealed to be the mechanism of such correlations by using the digital image correlation method and the pressure film technology based on the statistical method.

A new contact material—Ag/SnO_2-La_2O_3-Bi_2O_3

A super-fine compound powder, Ag/SnO_2+La_2O_3+ Bi_2O_3, has been obtainedusing the chemical coprecipitation method. And a new contact material, Ag/SnO_2+La_2O_3+Bi_2O_3, wasproduced by the powder metallurgy method. Its properties are as follows: the density is 9.75-9.93g/cm^3, the resistivity is 2.31-2.55 μΩ ·cm, the hardness is 880-985 MPa. Its mi-crostructureshows that the fine oxides have a uniform distribution in the silver matrix. The results ofmake-break capacity and temperature rise testing show that the new material has better ability ofanti-arc erosion and lower temperature rise than that of commonly used Ag/CdO.

Big Data Creates New Opportunities for Materials Research: A Review on Methods and Applications of Machine Learning for Materials Design

Materials development has historically been driven by human needs and desires, and this is likely to con- tinue in the foreseeable future. The global population is expected to reach ten billion by 2050, which will promote increasingly large demands for clean and high-ef ciency energy, personalized consumer prod- ucts, secure food supplies, and professional healthcare. New functional materials that are made and tai- lored for targeted properties or behaviors will be the key to tackling this challenge. Traditionally, advanced materials are found empirically or through experimental trial-and-error approaches. As big data generated by modern experimental and computational techniques is becoming more readily avail- able, data-driven or machine learning (ML) methods have opened new paradigms for the discovery and rational design of materials. In this review article, we provide a brief introduction on various ML methods and related software or tools. Main ideas and basic procedures for employing ML approaches in materials research are highlighted. We then summarize recent important applications of ML for the large-scale screening and optimal design of polymer and porous materials, catalytic materials, and energetic mate- rials. Finally, concluding remarks and an outlook are provided.

Polyaniline Formed in Alkaline Solution─A New Luminous Material

Electropolymerization of aniline in KOH solution and properties of the polymer are studied by using in situ reflex ellipsometry, cyclic voltammetry and fluorescence spectroscopic method. The change patterns of ellipsometric parameters and the thickness of film in the process of electropolymerization are investigated. The complex refractive indices and the fluorescence spectra of PAN indicate that the PAN is a new kind of luminous material.

Biologically Inspired Self-assembling Synthesis of Bone-like Nano-hydroxyapatite/PLGA-(PEG-ASP)_n Composite: A New Biomimetic Bone Tissue Engineering Scaffold Material

A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.

Body armour-New materials, new systems

This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve e a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in ongoing developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.