Preparation of fibrous nickel powder by precipitation transformation coupled with thermal decomposition

Fibrous particulate precursor was obtained by precipitation transformation in the ternary solution system of ammonium oxalate, nickel chloride and ammonia. The composition and morphology of precursor were characterized by XRD, SEM, IR and DTA/TGA analyses. The results show that the chemical composition and morphology of precursor precipitates at pH=8.4？8.8 are different from those of precursor precipitates at pH=6.0, and the mechanisms of the thermal decomposition of the precursors are different. The effects of various conditions in the process of thermal decomposition, including precursor morphology, atmosphere, temperature and time on the morphology and dispersion degree of obtained nickel powders were studied in detail. The final product inherits the morphology of precursor when the thermal decomposition is conducted under a weakly reducing atmosphere at temperature range of 400？440 °C for 30 min. Fibrous nickel powder can be produced with good dispersion, and its shape changes from smooth, straight and compact fiber into loose and curved fiber with rough surface.

Effect of surfactants on dispersion property and morphology of nano-sized nickel powders

Fine face-centered cubic (FCC) nickel powders were synthesized by liquid phase reduction with different surfactants. The products were investigated by scanning electron microscopy (SEM), laser particle size analyzer and X-ray powder diffraction (XRD). The results indicate that the type, dosage and relative molecular mass of surfactants significantly impact the purity, dispersion property, particle size, size distribution and morphology of the products. The nonionic surfactants poly ethylene glycol (PEG) and polyethylene glycol sorbitan monostearate (Tween) showed better dispersing ability in the reaction system than the others. The optimal mass ratios of surfactant to Ni are 100 mg/g and 150 mg/g for PEG-600 and Tween-40, respectively. The products obtained in the optimal conditions have ideal morphology and narrow size distribution. Moreover, study on the relative molecular mass effect revealed that with the increase of the relative molecular mass of Tween, the morphology of nickel powders changed from sphere to spiny ball.

Preparation and study on performance of submicron nickel powder for multilayer chip positive temperature coefficient resistance

Base metal nickel is often used as the inner electrode in multilayer chip positive temperature coefficient resistance （PTCR）. The fine grain of ceramic powders and base metal nickel are necessary. This paper uses reducing hydrazine to gain submicron nickel powder whose diameter was 200-300 nm through adjusting the consumption of nucleating agent PVP properly. The submicron nickel powder could disperse well and was fit for co--fired of multilayer chip PTCR. It analyes the submicron nickel powder through x-ray Diffraction （XRD） and calculates the diameter of nickel by PDF cards. Using XRD analyses it obtains several conclusions： If the molar ratio of hydrazine hydrate and nickel sulfate is kept to be a constant, when enlarging the molar ratio of NaOH/Ni^2＋, the diameter of nickel powder would become smaller. When the temperature in the experiment raises to 70-80 ℃, nickel powder becomes smaller too. And if the molar ratio of NaOH/Ni2＋ is 4, when molar ratio of （C2H5O）2/Ni^2＋ increases, the diameter of nickel would reduce. Results from viewing the powders by optical microscope should be the fact that the electrode made by submicron nickel powder has a better formation and compactness. Furthermore, the sheet resistance testing shows that the electrode made by submicron nickel is smaller than that made by micron nickel.

Effects of Fe additive on diamond crystallization from carbonyl nickel powders-C system under HPHT condition

In this paper, diamond crystallization from carbonyl nickel powders-C and carbonyl nickel powders + Fe–C systems are investigated in detail at a pressure of 6.0 GPa and temperatures ranging from 1410°C–to 1435°C by temperature gradient growth. The effects of Fe additive on the crystal morphology are discussed in the diamond crystallization process.Furthermore, Fourier infrared measurement results indicate that the spectrum of the diamond obtained from Ni + Fe–C system after annealing treatment is nearly consistent with that of natural diamond crystal. We believe that this study is of benefit to a further understanding of the growth mechanism of natural diamond.

Preparation of ultrafine nickel powder by wet chemical process

The main technical problems of nickel powder for multiplayer ceramic capacitors are particle size controlling, the agglomeration and tap density. Ultrafine nickel powders with submicron size and spherical shape were synthesized by the hydrazine reduction of nickel sulfate in ethanol-water solvent. The effects of reaction temperature, nucleator and flow rate of nickel sulfate solution on nickel powders properties were investigated. The nickel particles synthesized were characterized by SEM and TGA. The results show that the average particle size changes from 0.1 to 0.7 μm by adjusting reaction temperature (53- 73 ℃) and flow rate of nickel sulfate solution (50- 100 mL/min). Moreover, temperature below 60 ℃ and appropriate flow rate of nickel sulfate solution (85 mL/min) are in favor of obtaining particles with high tap density (>3.0 g/cm3). In addition, the introduction of nucleator is useful to obtaining particles with narrow size distribution.

Preparation of fine nickel powders via reduction of nickel hydrazine complex precursors

Fine nickel(Ni) powders with controllable particle sizes were synthesized via the reduction of nickel hydrazine complex precursors of pure [Ni(N2H4)2]Cl2 and a mixture of [Ni(N2H4)2]Cl2 and [Ni(N2H4)3]Cl2 in aqueous solution. The mechanism of the formation of metallic Ni powders experiences the reduction of nickel hydroxide by hydrazine released from the ligand exchange reaction between nickel hydrazine complex and NaOH. In comparison with the method of preparing Ni powders from nickel salts,the method of making Ni powders via the reduction of nickel hydrazine complex precursors shows the advantages of using half dosage of hydrazine for complete reduction of nickel ions in solution,and the obtained Ni particles show less agglomeration and better dispersibility. Moreover,the average particle size of nickel powders can be controlled from 180 to 260 nm by adjusting the reaction molar ratio and concentration.

PREPARATION OF ULTRAFINE NICKEL POWDER

ＰＲＥＰＡＲＡＴＩＯＮＯＦＵＬＴＲＡＦＩＮＥＮＩＣＫＥＬＰＯＷＤＥＲＣｈａｉＬｉｙｕａｎ；ＺｈｏｎｇＨａｉｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＮｏｎｆｅｒｒｏｕｓＭｅｔａｌｌｕｒｇｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，...

Synthesis and electromagnetic absorption properties of micro-nano nickel powders prepared with liquid phase reduction method

Monodisperse micro-nano nickel powders have been prepared by chemical reduction of aqueous solution NiSO_(4),NaOH and NaH_(2)PO_(2),and the influence of pH value and initial concentration of NiSO_(4) on the size,structure,morphology and microwave absorption properties of nickel powders were investigated.The crystal structure of nickel powders was characterized by X-ray diffraction(XRD).And the morphology of the as-synthesized products was characterized by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The microwave absorption properties of the composite materials were characterized by network analyzer.The result indicates that the growth of nickel powders produced by NiSO_(4) and NaH_(2)PO_(2) at alkaline condition deeply relies on pH value and initial concentration of NiSO_(4) in reaction system.Different sizes of nickel powders with the diameter of 1.5μm and 180 nm were produced at the pH value of 10 and initial concentration of NiSO_(4) at 0.5 mol/L.The network analyzer showed definite microwave absorption properties of nickel powders with different sizes in the range of 0.5-18.0 GHz.

γ-Radiation synthesis of nanocrystalline nickel powder from nickel (Ⅱ ) -ammonia complex solution

NANOCRYSTALLINE nickel is very important for its applications in the fields such as catalysis andmagnetic materials.The usual method used for preparing nanocrystalline nickel is inert gas e-vaporation,which requires high temperature.However,high temperature easily leads tothe growth or oxidation of nickel particles.Marignier et al.reported the nickel microaggre-gates dispersed in solution produced by γ-irradiating a dilute solution of Ni2+

Effect of Spherical Ni Powder on Microstructure of Secondary Carbon in MgO-C Refractories Matrix

In order to tackle the shortcomings of high brittleness,hard graphitization,and poor oxidation resistance resulted from carbonization of phenolic resin of Mg O- C refractories, effects of 2 mass% spherical Ni, and2 mass% spherical Ni plus 7. 5 mass% Al composite powder on microstructure of the secondary carbon in Mg O- C refractories matrix were investigated. The results show that a large number of carbon whiskers form after the carbonization of phenolic resin with Ni powder;in the Mg O- C refractories matrix with only Ni powder,the carbon microspheres form at all treatment temperatures and change slightly with the temperature rising;the carbon whiskers begin to generate in the specimens with composite powder at 1 000 ℃,the diameter of the carbon whiskers is about 0. 4- 0. 5 μm,and the length is about 3- 4 μm,and the formed carbon whiskers increase gradually with the temperature rising.

Surface characteristics of rapidly solidified nickel-based superalloy pow-ders prepared by PREP

The surface microstructure and the surface segregation of FGH 95 nickel-basedsuperalloy powders prepared through plasma rotating electrode processing (PREP) have beeninvestigated by using SEM and AES. The results indicate that the surface microstructure of powderschanges from dendrite into cellular stricture as the particle size of powders decrease, and thepredominant precipitates solidified on the particle surfaces were identified as MC' type carbidesenriched with Nb and Ti. It was also indicated that along with the depth of particle surfaces, thesegregation layer of S, C and O elements are thick, and that of Ti, Cr elements are thin for largesire powders while they are in reverse for median size particles.

Cooling γ′ precipitation behavior and strengthening in powder metallurgy su-peralloy FGH4096

Two cooling schemes （continuous cooling and interrupted cooling tests） were applied to investigate the cooling γ precipitation behavior in powder metallurgy superalloy FGH4096. The effect of cooling rate on cooling γ precipitation and the development of γ precipitates during cooling process were involved in this study. The ultimate tensile strength （ErrS） of the specimens in various cooling circumstances was tested. The experiential equations were obtained between the average sizes of secondary and tertiary γ precipitates, the strength, and cooling rate. The results show that they are inversely correlated with the cooling rate as well as the grain boundary changes from serrated to straight, the shape of secondary γ precipitates changes from irregular cuboidal to spherical, while the formed tertiary γ precipitates are always spherical. The interrupted cooling tests show that the average size of secondary γ precipitates increases as a linear function of interrupt temperature for a fixed cooling rate of 24℃/min. The strength first decreases and then increases against interrupt temperature, which is fundamentally caused by the multistage nucleation of γ precipitates during cooling process.

Preparation of high emissivity NiCr_2O_4 powders with a spinel structure by spray drying

Spray-drying was used to produce the high emissivity NiCr2O4 powders with a spinel structure. Preliminary investigations focused on fabricating the high emissivity powders for infrared radiation coatings and finding the relationship between microstructure and emissivity. The NiCr2O4 powders were characterized for composition, microstructure, and infrared emissivity by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, infrared radiant instrument, and Fourier transform infrared spectra （FT-IR）. Thermogravimetry and differential thermal analysis show that the appropriate baking temperature for NiCr2O4 powder preparation is about 1200？C. The emissivity measurement and FT-IR spectra show that, because of the special spinel structure, the NiCr2O4 powders have a high emissivity about 0.91. Spray-drying is a suitable method to produce the high emissivity ceramic powders.

Synthesis of nanocrystalline NiCrC alloy feedstock powders for thermal spraying by cryogenic ball milling

Nanocrystalline NiCrC alloy powders with a qualified particle size distribution for thermal spraying were synthesized using the cryogenic ball milling （cryomilling） method. The morphology, microstructure, size distribution, and phase transformation of the powders were characterized by scanning electron microscopy （SEM）, laser scattering for particle size analysis, X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. After cryomilling for 20 h, the average grain size of the as-milled powders approached a constant value of 30 nm by XRD measurement. The average particle size slightly increased from 17.5 to 20.3 μm during the 20-h milling. About 90vol% of the powders satisfied the requirement for thermal spraying with the particle dimension of 10-50 μm, and most of the powders exhibited spherical morphology, which were expected to have good fluidity during thermal spraying. The Cr2O3 phase formed during the cryornilling process as revealed in the XRD spectra, which was expected to enhance the thermal stability of the as-milled powders during the followed thermal spraying or other heat treatment.

SYNTHESIS AND SOLID STATE SINTERING OF W-Ni-Fe NANO-COMPOSITE POWDERS

The mixture of 90 wt%W, 7 wt%Ni and 3 wt%Fe elemental powders was milled in a planetary high-energy ball mill. The evolution of the structure during milling and the sintering behavior of the milled powders were tested. The results showed that by mechanical alloying W(Ni, Fe) supersaturated solid solution with nano-meter size formed, which can enhance the sintering process. Fully dense alloy from the milled powders was obtained through solid state sintering. The tensile strength of the obtained alloy is over 900 MPa which is comparable to that of the alloy sintered by traditional liquid-phase sintering from un-milled powders of the same composition.

Spray pyrolysis synthesis of nickel-rich layered cathodes LiNi_(1-2x)Co_xMn_xO_2(x = 0.075, 0.05, 0.025) for lithium-ion batteries

In this study we report a series of nickel-rich layered cathodes LiNi1-2xCoxMnxO2（x = 0.075, 0.05,0.025） prepared from chlorides solution via ultrasonic spray pyrolysis. SEM images illustrate that the samples are submicron-sized particles and the particle sizes increase with the increase of Ni content.LiNi0.85Co0.075Mn0.075O2 delivers a discharge capacity of 174.9 mAh g-1 with holding 93% reversible capacity at 1 C after 80 cycles, and can maintain a discharge capacity of 175.3 mAh g-1 at 5 C rate. With increasing Ni content, the initial specific capacity increases while the cycling and rate performance degrades in some extent. These satisfying results demonstrate that spray pyrolysis is a powerful and efficient synthesis technology for producing Ni-rich layered cathode（Ni content 〉 80%）.

STUDY ON THE SURFACE OF TITANIUM CARBIDE PARTICLE PACKAGED NICKEL

Two kinds of packaged processes by nickel on the surface of titanium carbide particle are studied in this work. One is the chemical nickel-plating, the other is the organometallic compound decomposition. The composition, structure and morphology of the packaged powder were analyzed with XRD, DAT/TGA, SEM, EPMA etc. It has been shown that nickel was even dispersed on the surface of titanium carbide particle by the. two kinds of processes, deposited nickel exists as spherical particles of about 0.1 μm in diameter. The merits and demerits of the two kinds of processes have been compared, the organometallic copmound decomposition among them is a kind of hopeful method, which is not used by other researchers.

THE ROLE OF NIOBIUM IN NICKEL-BASED SUPERALLOYS AND CHARACTERIZATION OF PM ALLOY EP741NP

The role of niobium in nickel-based superalloys is reviewed. The importance of niobium as a strengthener is discussed. New developments in nickel-based superalloys are also briefly mentioned, including some results that show improved resistance to sulfidation by niobium. Research results from a current program on the role of niobium in the Russian powder metallurgy alloy EP741NP are presented. Future research plans on the role of niobium in superalloys are also discussed.

电沉积法制备高纯镍粉

采用电沉积法制备高纯度镍粉,用Zeta电位仪、电感耦合等离子体发射光谱仪、扫描电子显微镜和X射线衍射分析等手段分别表征产物镍粉的粒度、化学成分、微观形貌和微观晶体结构。系统探究了工艺参数电流密度、镍离子质量浓度、电解液pH值、NH_(4)Cl质量浓度、电解温度和取粉时间等因素对电积镍粉粒度、电流效率以及镍粉微观形貌的影响。结果表明,工艺参数电流密度、镍离子质量浓度、电解液pH值、NH_(4)Cl质量浓度、电解温度和取粉时间均对电积镍粉的粒度分布和形貌等有显著影响;电极板间距为30 mm时的最佳工艺参数条件为:电流密度为3000 A/m^(2)、电积液Ni^(2+)质量浓度为5 g/L、pH值为5、温度40℃、添加剂NH_(4)Cl质量浓度为10 g/L、取粉时间间隔为120 s,在此试验条件下所得镍粉粒度分布均匀,颗粒微观形貌为树枝状,镍粉纯度可达到99.87%;模拟工业生产电解液成分人工配制的含杂质离子Fe^(3+)、Cu^(2+)的硫酸镍溶液为电解液进行电积试验,可得到镍粉纯度为99.84%、粒度分布均匀、微观形貌呈树枝状的高纯镍粉。研究结果可为工业电积镍制备高纯镍粉提供参考。

线锯用金刚石微粉表面化学镀镍工艺及性能研究

金刚石微粉性能是提升金刚石线锯性能的关键因素。用化学镀方法在线锯用金刚石微粉表面镀镍,通过正交试验研究金刚石粒度、次亚磷酸钠浓度、镀液pH值和镀液温度对化学镀镀层沉积速率、镀层密度、镀层耐腐蚀性能、镀层致密度等性能的影响。结果表明:M1/2、M6/12、M20/30三种不同粒度金刚石微粉,在次亚磷酸钠浓度为25~35g/L、化学镀液pH值为3~11、化学镀温度为30℃~90℃时,针对镀层沉积速率、镀层密度和镀层耐腐蚀性的最佳工艺参数不同;不同粒度的金刚石微粉在相同工艺条件下化学镀镍,金刚石微粉粒度越大,镀层越均匀致密;金刚石微粉化学镀镍各工艺参数之间相互作用,共同影响镀层性能。对于不同粒度的金刚石微粉,各因素对镀层性能的影响权重不同,因此针对不同粒度、不同镀层性能需求的金刚石微粉应采取不同的镀覆工艺参数。