Cracking on a nickel-based superalloy fabricated by direct energy deposition

Cracks have consistently been a significant challenge limiting the development of additive manufactured nickel-based superalloys.It is essential to investigate the location of cracks and their forming mechanism.This study extensively examines the impact of solidification process,microstructural evolution,and stress concentration on crack initiation during direct energy deposition(DED).The results emphasize that the crack formation is significantly related to large-angle grain boundaries,rapid cooling rates.Cracks caused by large-angle grain boundaries and a fast-cooling rate predominantly appear near the edge of the deposited samples.Liquation cracks are more likely to form near the top of the deposited sample,due to the presence ofγ/γ'eutectics.The secondary dendritic arm and the carbides in the interdendritic regions can obstruct liquid flow during the final stage of solidification,which results in the formation of solidification cracks and voids.This work paves the way to avoid cracks in nickel-based superalloys fabricated by DED,thereby enhancing the performance of superalloys.

Effect of the capsule on deformation and densification behavior of nickel-based superalloy compact during hot isostatic pressing

The Shima yield criterion used in finite element analysis for nickel-based superalloy powder compact during hot isostatic pressing(HIP) was modified through uniaxial compression experiments. The influence of cylindrical capsule characteristics on FGH4096M superalloy powder compact deformation and densification behavior during HIP was investigated through simulations and experiments. Results revealed the simulation shrinkage prediction fitted well with the experimental shrinkage including a maximum shrinkage error of 1.5%. It was shown that the axial shrinkage was 1.7% higher than radial shrinkage for a cylindrical capsule with the size of ∮50 mm × 100 mm due to the force arm difference along the axial and radial direction of the capsule. The stress deviated from the isostatic state in the capsule led to the uneven shrinkage and non-uniform densification of the powder compact. The ratio of the maximum radial displacement to axial displacement increased from0.47 to 0.75 with the capsule thickness increasing from 2 to 4 mm. The pressure transmission is related to the capsule thickness, the capsule material performance, and physical parameters in the HIP process.

Microstructure and mechanical properties of nickel-based superalloy fabricated by laser powder-bed fusion using recycled powders

Evaluating the recyclability of powders in additive manufacturing has been a long-term challenge.In this study,the microstructure and mechanical properties of a nickel-based superalloy fabricated by laser powder-bed fusion(LPBF)using recycled powders were investigated.Re-melted powder surfaces,satellite particles,and deformed powders were found in the recycled powders,combined with a high-oxygencontent surface layer.The increasing oxygen content led to the formation of high-density oxide inclusions;moreover,printing-induced cracks widely occurred and mainly formed along the grain boundaries in the as-built LPBF nickel-based superalloys fabricated using recycled powders.A little change in the Si or Mn content did not increase the hot cracking susceptibility(HCS)of the printed parts.The changing aspect ratio and the surface damage of the recycled powders might contribute to increasing the crack density.Moreover,the configuration of cracks in the as-built parts led to anisotropic mechanical properties,mainly resulting in extremely low ductility vertical to the building direction,and the cracks mainly propagated along the cellular boundary owing to the existence of a brittle precipitation phase.

Anomalous yield and intermediate temperature brittleness behaviors of directionally solidified nickel-based superalloy

A nickel-based superalloy with good corrosion resistance was fabricated by directional solidification, and its microstructure and tensile properties at elevated temperatures were investigated. Microstructure observations reveal that the γ＇ precipitates are arrayed in the y matrix regularly with some MC, Ni5Hf and M3B2 particles distributed along the grain boundary. The tensile tests exhibit that the tensile properties depend on temperature significantly and demonstrate obvious anomalous yield and intermediate-temperature brittleness （ITB） behavior. Below 650℃, the yield strength decreases slightly but the ultimate tensile strength almost has no change. When the temperature is between 650 ℃ and 750 ℃, the yield and ultimate tensile strengths rise rapidly, and after then they both decrease gradually with temperature increasing further. The elongation has its minimum value at about 700 ℃. The TEM examination exhibits that sharing of the γ＇ by dislocation is almost the main deformation mechanism at low temperatures, but the γ＇ by-pass dominates the deformation at high temperatures. The transition temperature from shearing to by-pass should be around 800 ℃. The anomalous yield and intermediate-temperature brittleness behaviors should be attributed to the high content of γ＇. In addition, the carbides and eutectic structure also contribute some to the ITB behaviors of the alloy.

Microstructure evolution and deformation features of single crystal nickel-based superalloy containing 4.2% Re during creep

By means of microstructure observation and measurement of creep properties,the high temperature creep behaviors of a single crystal nickel-based superalloy containing Re were investigated.Results show that the single crystal nickel-based superalloy containing 4.2% Re possesses a better creep resistance at high temperature.After being crept up to fracture,the various morphologies are displayed in the different areas of the sample,and the γ＇ phase is transformed into the rafted structure along the direction vertical to the applied stress axis in the regions far from the fracture.But the coarsening and twisting extents of the rafted γ＇ phase increase in the regions near the fracture,which is attributed to the occurrence of the larger plastic deformation.In the later stage of creep,the deformation mechanism of the alloy is that the dislocations with [01^-1]and [011] trace features shear into the rafted γ＇ phase.The main/secondary slipping dislocations are alternately activated to twist the rafted γ＇ phase up to the occurrence of creep fracture,which is thought to be the fracture mechanism of the alloy during creep.

Effect of carbon and boron additions on segregation behavior of directionally solidified nickel-base superalloys with rhenium

The phase transformation temperature, segregation behavior of elements and as-cast microstructure were investigated in experimental nickel-base superalloys with different levels of carbon and boron. The results show that the liquidus temperature decreases gradually but the carbide solvus temperature increases obviously with increasing carbon addition. Minor boron addition to the alloy decreases the liquidus temperature, carbide solvus temperature and solidus temperature slightly. Apart from rhenium, the segregation coefficients of the elements alter insignificantly with the addition of carbon. The segregation behavior of rhenium, tungsten and tantalum become more severe with boron addition. The volume fraction and size of primary carbides increase with increasing carbon addition. The main morphology of the carbides is script-like in the alloys with carbon addition while the carbide sheets tend to be concentrated and coarse in the boron-containing alloys

Effect of hot extrusion and heat treatment on microstructure of nickel-base superalloy

Effects of hot extrusion (HEX) and heat treatment on prior particle boundary (PPB), MC carbides,γ′precipitates and grain size of nickel-base FGH96 superalloy were studied. The results show that PPB consists of largeγ′, MC carbides enriched with Ti, Nb and a modicum of oxides. Thereafter, it can efficaciously tune γ′ precipitate size from micrometer down to nanometer region and simultaneously results in the annihilation of PPB by HEX process. The activation energy for grain growth of as-HEXed FGH96 superalloy was measured to be 402.6 kJ/mol, indicating that γ′ precipitate serves the critical role in inhibiting grain growth under sub-solvus heat treatment. Moreover, the results reveal that grain growth is primarily restrained by MC carbide in the case of super-solvus temperature.

Surface characteristics of rapidly solidified nickel-based superalloy pow-ders prepared by PREP

The surface microstructure and the surface segregation of FGH 95 nickel-basedsuperalloy powders prepared through plasma rotating electrode processing (PREP) have beeninvestigated by using SEM and AES. The results indicate that the surface microstructure of powderschanges from dendrite into cellular stricture as the particle size of powders decrease, and thepredominant precipitates solidified on the particle surfaces were identified as MC' type carbidesenriched with Nb and Ti. It was also indicated that along with the depth of particle surfaces, thesegregation layer of S, C and O elements are thick, and that of Ti, Cr elements are thin for largesire powders while they are in reverse for median size particles.

Hot working characteristics of HEXed PM nickel-based superalloy during hot compression

To study the hot deformation behavior of a new powder metallurgy nickel-based superalloy,hot compression tests were conducted in the temperature range of 1020−1110℃ with the strain rates of 0.001−1 s^−1.It is found that the flow stress of the superalloy decreases with increasing temperature and decreasing strain rate.An accurate constitutive equation is established using a hyperbolic-sine type expression.Moreover,processing map of the alloy is constructed to optimize its hot forging parameters.Three domains of dynamic recrystallization stability and instability regions are identified from the processing map at a strain of 0.7,respectively.The adiabatic shear band,intergranular crack and a combination of intergranular crack and wedge crack are demonstrated to be responsible for the instabilities.Comprehensively analyzing the processing map and microstructure,the optimal isothermal forging conditions for the superalloy is determined to be t=1075−1105℃ andε&=10^−3−10−2.8 s^−1.

Grain size based low cycle fatigue life prediction model for nickel-based superalloy

Nickel-based superalloys are easy to produce low cycle fatigue(LCF)damage when they are subjected to high temperature and mechanical stresses.Fatigue life prediction of nickel-based superalloys is of great importance for their reliable practical application.To investigate the effects of total strain and grain size on LCF behavior,the high temperature LCF tests were carried out for a nickel-based superalloy.The results show that the fatigue lives decreased with the increase of strain amplitude and grain size.A new LCF life prediction model was established considering the effect of grain size on fatigue life.Error analyses indicate that the prediction accuracy of the new LCF life model is higher than those of Manson-Coffin relationship and Ostergren energy method.

Morphological evolution of γ'precipitates in a nickel-based superalloy during various solution treatments

The morphological evolution of the γ' phase in nickel-based superalloy жc6y during various solution heat treatments was investigated. The significant changes of the γ' precipitates were observed in the solution-treated samples. The coarsening and dissolution of γ' phase simulta-neously occurred at intermediate temperatures. In some areas, the primary precipitates became blunt and the adjacent ones were intercon-nected with each other via a diffuse neck, indicating a coarsening process of the primary γ' population. The coarsening was dominated by the precipitate agglomeration mechanism (PAM) rather than by the well-known Ostwald ripening mechanism. In other areas, the partial dissolu-tion of the γ' precipitates began to occur, spreading gradually from dendrite cores to interdendritic regions. In addition, a flower-like γ' struc-ture was developed during the subsolvus solution treatments. The observable long filaments composed of erraticly shaped precipitates were caused by the heterogeneous nucleation of the cooling precipitates during water quenching.

Research progress on selective laser melting processing for nickel-based superalloy

Selective laser melting(SLM),an additive manufacturing process mostly applied in the metal material field,can fabricate complex-shaped metal objects with high precision.Nickel-based superalloy exhibits excellent mechanical properties at elevated temperatures and plays an important role in the aviation industry.This paper emphasizes the research of SLM processed Inconel 718,Inconel 625,CM247LC,and Hastelloy X,which are typical alloys with different strengthening mechanisms and operating temperatures.The strengthening mechanism and phase change evolution of different nickel-based superalloys under laser irradiation are discussed.The influence of laser parameters and the heat-treatment process on mechanical properties of SLM nickel-based superalloys are systematically introduced.Moreover,the attractive in-dustrial applications of SLM nickel-based superalloy and printed components are presented.Finally,the prospects for nickel-based superalloy materials for SLM technology are presented.

Oxidation behaviors of wrought nickel-based superalloys in various high temperature environments

Oxidation characteristics of Alloy 617 and Haynes 230 at 900 oC in simulated helium environment,hot steam environment containing H2 as well as in air and pure helium conditions were investigated.Compared to air condition,the oxidation rate of Alloy 617 was not significantly affected in helium and hot steam environments,while Haynes 230 showed lower oxidation rate in helium environment.On the other hand,the oxide morphology and structure of Alloy 617 were strongly affected by the environments,but those of Haynes 230 were less dependent on the environments.For Haynes 230,a Cr2O3 inner layer and a protective MnCr2O4 outer layer were formed in all environments,which contributed to the better oxidation resistance.As the mechanical properties,such as creep and tensile properties,were significantly affected by the oxidation behaviors,surface treatment methods to enhance oxidation resistance of these alloys should be developed.

High temperature deformation behavior and microstructure evolution of wrought nickel-based superalloy GH4037 in solid and semi-solid states

Cylindrical samples of Ni-based GH4037 alloy were compressed at solid temperatures(1200,1250 and 1300℃) and semi-solid temperatures(1340,1350,1360,1370 and 1380℃) with different strain rates of 0.01,0.1 and 1 s-1.High temperature deformation behavior and microstructure evolution of GH4037 alloy were investigated.The results indicated that flow stress decreased rapidly at semi-solid temperatures compared to that at solid temperatures.Besides,the flow stress continued to increase after reaching the initial peak stress at semi-solid temperatures when the strain rate was 1 s-1.With increasing the deformation temperature,the size of initial solid grains and recrystallized grains increased.At semi-solid temperatures,the grains were equiaxed,and liquid phase existed at the grain boundaries and inside the grains.Discontinuous dynamic recrystallization(DDRX) characterized by grain boundary bulging was the main nucleation mechanism for GH4037 alloy.

Recent research progress in the mechanism and suppression of fusion welding-induced liquation cracking of nickel based superalloys

Nickel-based superalloys are extensively used in the crucial hot-section components of industrial gas turbines,aeronautics,and astronautics because of their excellent mechanical properties and corrosion resistance at high temperatures.Fusion welding serves as an effective means for joining and repairing these alloys;however,fusion welding-induced liquation cracking has been a challenging issue.This paper comprehensively reviewed recent liquation cracking,discussing the formation mechanisms,cracking criteria,and remedies.In recent investigations,regulating material composition,changing the preweld heat treatment of the base metal,optimizing the welding process parameters,and applying auxiliary control methods are effective strategies for mitigating cracks.To promote the application of nickel-based superalloys,further research on the combination impact of multiple elements on cracking prevention and specific quantitative criteria for liquation cracking is necessary.

Coarsening behavior of γ' particles in a nickel-base superalloy

The coarsening behavior of γ particles in a nickel-base superalloy FGH95 was investigated by means of experimental observations and growth kinetics calculations. The results show that when aging at 1000,1080 and 1140°C for different times,the relation of average particle size to time obeys the cube law ( a /2)3= kt,where k is 15.49 × 103,77.5 × 103 and 230.04 × 103 nm3/min,respectively. The particle size distributions are better fit to the LSW theoretical distributions when aging at 1000°C within 1440 min....

Optimality analysis of multiplex A-TIG welding flux for nickel-base superalloy

Orthogonal experiment is employed to study a new kind of multiplex flux for nickel-base superalloy. This activated TIG welding flux is composed of NaF, MgF2 and CaF2, and their proportion is 5：4：1. Compared with conventional TIG welding, the penetration increases 164% by the action of the flux. Tensile test result indicates that the fracture strength of the mixed flux A-TIG weld bead is higher than base metal, and it increases along with the decrement of the welding current. The average extensibility of the weldment is beyond 100%, which means perfect ductility. MetaUographs elucidate that there exist lots of deep and evenly distributed dimples on the fiacture section of weld bead while on that of base metal there only exists a few shallow dimples and massive tearing ridge.

Effect of Ta addition on solidification microstructure and element segregation of IN617B nickel-base superalloy

IN617B nickel-base superalloy is considered as a good candidate material in 700℃advanced ultrasupercritical coal-fired power plants.The effect of Ta addition on solidification microstructure and element segregation of IN617B alloy was investigated by OM,SEM,TEM,EDS,EPMA and thermodynamic calculation.The results showed that the solidification microstructure exhibited a dendritic segregation pattern with many primary carbides distributed in interdendritic regions,such as network M_(6)C,lath M_(23)C_(6) and granular Ti(C,N).The addition of Ta promoted the precipitation of Ta-rich MC significantly inhibiting the precipitation of M_(6)C and M_(23)C_(6),and reduced the segregation degree of Al,Mo and Ti alloying elements.The addition of Ta decreased the melting temperature of MC carbide,but did not impact the solidification path,that was,L→γmatrix→MC or Ti(C,N)→M_(6)C→M_(23)C_(6),where MC and Ti(C,N)tended to form symbiotic microstructure with M_(6)C.This study will provide theoretical basis and data support for the alloy optimization and casting structure control of IN617B nickel-based superalloy.

TEMPERATURE EFFECT ON LOW-CYCLE FATIGUE BEHAVIOR OF NICKEL-BASED SINGLE CRYSTALLINE SUPERALLOY

The low-cycle fatigue （LCF） behavior of a nickel-based single crystal superalloy with [001] orientation was studied at an intermediate temperature of T0℃ and a higher temperature of To ＋ 250℃ under a constant low strain rate of 10^-3 s^-1 in ambient atmosphere. The superalloy exhibited cyclic tension-compression asymmetry which is dependent on the temperature and applied strain amplitude. Analysis on the fracture surfaces showed that the surface and subsurface casting micropores were the major crack initiation sites. Interior Ta-rich carbides were frequently observed in all specimens. Two distinct types of fracture were suggested by fractogaphy. One type was characterized by Mode-I cracking with a microscopically rough surface at To ＋ 250℃. Whereas the other type at lower temperature T0℃ favored either one or several of the octahedral {111} planes, in contrast to the normal Mode-I growth mode typically observed at low loading frequencies （several Hz）. The failure mechanisms for two cracking modes are shearing of γ＇ precipitates together with the matrix at T0℃ and cracking confined in the matrix and the γ/γ＇interface at To - 250℃.

Effect of cooling rate on MC carbide in directionally solidified nickel-based superalloy under high thermal gradient

A series of directional solidification experiments have been performed to study the effect of cooling rate on the precipitation behavior of MC carbide in nickel-based superalloy under the temperature gradient of 500 K-s^-1. Results reveal that the morphology of MC carbide changes from coarse block to fine strip, then to Chinese-script, and their sizes reduce gradually with the increasing of cooling rate from 2.53 K.s^-1 to 36.4 K.s^-1. At low cooling rates, most of these carbides are found to be located at the grain boundary and interdendritic regions, while the coupled growth of some carbides and 7 matrix in the center of 7 grains is occurred at high cooling rate. The main elements forming MC carbide are Ta, W, and Hf.