Enhanced nitrite electroreduction to ammonia via interfacial dual-site adsorption

The nitrite(NO_(2)^(−))to ammonia(NH3)electroreduction reaction(NO_(2)^(−)RR)would be impeded by sluggish proton-coupled electron transfer kinetics and competitive hydrogen evolution reaction(HER).A key to improving the NH_(3) selectivity is to facilitate adsorption and activation of NO_(2)^(−),which is generally undesirable in unitary species.In this work,an efficient NO_(2)^(−)RR catalyst is constructed by cooperating Pd with In2O3,in which NO_(2)^(−)could adsorb on interfacial dual-site through“Pd–N–O–In”linkage,leading to strengthened NO_(2)^(−)adsorption and easier N=O bond cleavage than that on unitary Pd or In2O3.Moreover,the Pd/In_(2)O_(3)composite exhibits moderate H^(*)adsorption,which may facilitate protonation kinetics while inhibiting competitive HER.As a result,it exhibits a fairly high NH_(3)yield rate of 622.76 mmol h^(−1)g^(−1)cat with a Faradaic efficiency(FE)of 95.72%,good selectivity of 91.96%,and cycling stability towards the NO_(2)^(−)RR,surpassing unitary In_(2)O_(3)and Pd/C electrocatalysts.Besides,computed results indicate that NH_(3)production on Pd/In_(2)O_(3)follows the deoxidation to hydrogenation pathway.This work highlights the significance of H^(*)and NO_(2)^(−)adsorption modulation and N=O activation in NO_(2)^(−)RR electrochemistry by creating synergy between a mediocre catalyst with an appropriate cooperator.

Assessment of Nitrates and Nitrites in Borehole Water from the Southern and the Northern Region of Côte d’Ivoire (West Africa)

This study aimed to evaluate the quality of water from village boreholes by measuring physicochemical parameters such as nitrates, nitrites, and total organic carbon (TOC). Forty-five (45) village pumps from the Southern (Basse Côte) and the Northern (Korhogo) region of Cte d’Ivoire (west Africa) were sampled. Physicochemical parameters such as temperature, pH, conductivity at 25˚C, and turbidity were determined in situ, while nitrite and nitrate were analyzed according to ISO 10304-1 (2007) standard and total organic carbon (TOC) by NF EN 1484 (1997) standard. The results showed that the borehole waters of the Basse Côte and Korhogo analyzed are acidic, with an average temperature of 27.51˚C ± 0.16˚C and 29.95˚C ± 0.51˚C respectively for the Basse Côte and Korhogo regions. The borehole waters of the Basse Côtedo not contain nitrites, while those of Korhogo have average nitrite contents of 0.32 mg/l. The average nitrate rate in the waters of the Basse Côte and Korhogo are 12.08 ± 2.11 mg/l and 11.03 ± 3.18 mg/l respectively. The average TOC concentration of the waters of the Basse Côte is 1.28 ± 0.32 mg/l and that of Korhogo is 0.56 ± 0.09 mg/L. The study showed that the borehole waters of the Basse Côte and Korhogo have average temperatures between 27.4˚C and 29.95˚C with a slightly acidic pH value and acceptable salinity. The TOC concentrations obtained at the different sampling points were all below the French standard (2 mg/L) except for certains pumps of the Basse Côte. The water samples from the Basse Côte were devoid of nitrite. On the other hand, those from Korhogo revealed the presence of nitrite. Also, the borehole waters of the regions of the Basse Côte and Korhogo contain relatively high nitrate contents, presumably due to anthropometric activity. Overall, our study on the quality of drinking water showed that the waters analyzed are in compliance with international standards and safe for consumption.

Comprehensive understanding of the thriving electrocatalytic nitrate/nitrite reduction to ammonia under ambient conditions

Ammonia(NH_(3))is a multifunctional compound that is an important feedstock for the agricultural and pharmaceutical industries and attractive energy storage medium.At present,NH_(3)synthesis is highly dependent on the conventional Haber–Bosch process that operates under harsh conditions,which consumes large quantities of fossil fuels and releases a large amount of carbon dioxide.As an alternative,electrosynthesis is a prospective method for producing NH_(3)under normal temperature and pressure conditions.Although electrocatalytic nitrogen reduction to ammonia has attracted considerable attentions,the low solubility of N_(2)and high N≡N cracking energy render the achievements of high NH_(3) yield rate and Faradaic efficiency difficult.Nitrate and nitrite(NO_(x)^(-))are common N-containing pollutants.Due to their high solubilities and low dissociation energy of N=O,NO_(x)^(-)−are ideal raw materials for NH_(3) production.Therefore,electrocatalytic NO_(x)^(-)−reduction to NH_(3)(eNO_(x)RR)is a prospective strategy to simultaneously realise environmental protection and NH_(3) synthesis.This review offers a comprehensive understanding of the thriving eNO_(x)RR under ambient conditions.At first,the popular theory and mechanism of eNO_(x)RR and a summary of the measurement system and evaluation criteria are introduced.Thereafter,various strategies for developing NO_(x)−reduction catalysts are systematically presented and discussed.Finally,the challenges and possible prospects of electrocatalytic NO_(x)^(-1) reduction are outlined to facilitate energy-saving and environmentally friendly large-scale synthesis of NH_(3) in the future.

Investigation of an electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

To prolong the service life of optics,the feasibility of in situ cleaning of the multilayer mirror(MLM)of tin and its oxidized contamination was investigated using hydrogen plasma at different power levels.Granular tin-based contamination consisting of micro-and macroparticles was deposited on silicon via physical vapor deposition(PVD).The electrodedriven hydrogen plasma at different power levels was systematically diagnosed using a Langmuir probe and a retarding field ion energy analyzer(RFEA).Moreover,the magnitude of the self-biasing voltage was measured at different power levels,and the peak ion energy was corrected for the difference between the RFEA measurements and the self-biasing voltage(E_(RFEA)-eV_(self)).XPS analysis of O 1s and Sn 3d peaks demonstrated the chemical reduction process after 1 W cleaning.Analysis of surface and cross-section morphology revealed that holes emerged on the upper part of the macroparticles while its bottom remained smooth.Hills and folds appeared on the upper part of the microparticles,confirming the top-down cleaning mode with hydrogen plasma.This study provides an in situ electrode-driven hydrogen plasma etching process for tin-based contamination and will provide meaningful guidance for understanding the chemical mechanism of reduction and etching.

Assessment of Heavy Metals Contamination of Topsoil and Street Dust around Cement Factory in Southern Jordan

Evaluation of assessment of the metal processes governing the metals distribution in soil and dust samples is very significant and protects the health of human and ecological system. Recently, special attention has given to the assessment of metals pollution impact on soil and dust within industrial areas. This study aims to assess the metal contamination levels in the topsoil and street dust around the cement factory in Qadissiya area, southern Jordan. The levels of seven metals (namely Fe, Zn, Cu, Pb, Cr, Cd, and Mn) were analyzed using Flame Atomic Absorption Spec-trophotometer (FAAS) to monitor, evaluate, and to compare topsoil and road dust pollution values of metals of the different types of urban area. The physicochemical parameters which believed to affect the mobility of metals in the soil of the study area were determined such as pH, EC, TOM, CaCO3 and CEC. The levels of metal in soil samples are greater on the surface but decrease in the lower part as a result of the basic nature of soil. The mean values of the metals in soil can be arranged in the following order: Zn > Pb > Mn > Fe > Cu > Cr > Cd. The relatively high concentration of metals in the soil sample was attributed to anthropogenic activities such as traffic emissions, cement factory and agricultural activities. Correlation coefficient analysis and the spatial distribution of indices and the results of statistical analysis indicate three groups of metals: Fe and Mn result by natural origin, Zn, Pb, Cu and Zn result by anthropogenic origin (mainly motor vehicle traffic and abrasion of tires) while Cd is mixed origin. The higher content level values of metals of anthropogenic source in soil samples indicate that it is a source of contamination of air in the studied area. .

Acquired methemoglobinemia in a third trimester puerpera and her premature infant with sodium nitrite poisoning:A case report

BACKGROUND The common cause of sodium nitrite poisoning has shifted from previous accidental intoxication by exposure or ingestion of contaminated water and food to recent alarming intentional intoxication as an employed method of suicide/exit.The subsequent formation of methemoglobin(MetHb)restricts oxygen transport and utilization in the body,resulting in functional hypoxia at the tissue level.In clinical practice,a mismatch of cyanotic appearance and oxygen partial pressure usually contributes to the identification of methemoglobinemia.Prompt recognition of characteristic mismatch and accurate diagnosis of sodium nitrite poisoning are prerequisites for the implementation of standardized systemic interventions.CASE SUMMARY A pregnant woman was admitted to the Department of Critical Care Medicine at the First Affiliated Hospital of Harbin Medical University due to consciousness disorders and drowsiness 2 h before admission.Subsequently,she developed vomiting and cyanotic skin.The woman underwent orotracheal intubation,invasive mechanical ventilation(IMV),and correction of internal environment disturbance in the ICU.Her premature infant was born with a higher-than-normal MetHb level of 3.3%,and received detoxification with methylene blue and vitamin C,supplemental vitamin K1,an infusion of fresh frozen plasma,as well as respiratory support via orotracheal intubation and IMV.On day 3 after admission,the puerpera regained consciousness,evacuated the IMV,and resumed enteral nutrition.She was then transferred to the maternity ward 24 h later.On day 7 after admission,the woman recovered and was discharged without any sequelae.CONCLUSION MetHb can cross through the placental barrier.Level of MetHb both reflects severity of the sodium nitrite poisoning and serves as feedback on therapeutic effectiveness.

Effects of Standing Time during Pretreatment on the Nitrite Concentration Detected by Spectrophotometric Method

Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.

Evaluating bacterial contamination and surgical site infection risks in intracorporeal anastomosis: Role of bowel preparation

We recently read the study by Kayano et al on intracorporeal anastomosis(IA)for colon cancer,which assessed bacterial contamination and medium-term onco-logical outcomes and affirmed that IA is analogous to extracorporeal anastomosis in reducing intraperitoneal bacterial risk and achieving similar oncological results.Our commentary addresses gaps,particularly concerning bowel preparation and surgical site infections(SSIs),and highlights the need for comprehensive details on the bowel preparation methods that are currently employed,including mecha-nical bowel preparation,oral antibiotics(OA),their combination,and specific OA types.We emphasize the necessity for further analyses that investigate these me-thods and their correlation with SSI rates,to enhance clinical protocol guidance and optimize surgical outcomes.Such meticulous analyses are essential for refi-ning strategies to effectively mitigate SSI risk in colorectal surgeries.

Agricultural Contamination of the Surface Waters of the Upper Ouémé in Benin: The Case of Heavy Metals and Pesticides

Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific sampling stations: Okpara, Térou, Affon and Adjiro. Levels of heavy metals, including cadmium, chromium, copper, iron, mercury, nickel and lead, were measured and subjected to in-depth statistical analysis using graphical summation models. In addition, the concentrations of pesticide active ingredients present in the samples were interpreted and evaluated. The statistical data collected during this study were processed using R software, version 3.5.0. Results: The values obtained at the different stations Okpara, Térou, Affon and Adjiro are respectively Arsenic (2 × 10-4 mg/L;2.2 × 10-1 mg/L;1.2 × 10-4 mg/L;2 × 10-4 mg/L), Cadmium (4.4 × 10-5 mg/L;1.1 × 10-2 mg/L;10-4 mg/L;4 × 10-4 mg/L). Then Copper (7 × 10-4 mg/L;3 × 10-3 mg/L;7 × 10-4 mg/L;1 × 10-4 mg/L), Iron (1.51 mg/L;6.4 × 10-1 mg/L;2.0012 mg/L;2.9 × 10-1 mg/L), Lead (0 mg/L;0 mg/L;1.5 × 10-3 mg/L;1.5 × 10-3 mg/L). Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (Cadmium, Chromium, Copper, Iron, Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (cadmium, chromium, copper, iron, mercury, nickel and lead) were all below the guideline standards set by the WHO in 2006 for uncontaminated surface waters. This indicates that the surface waters of the Upper Ouémé were below acceptable contamination thresholds in terms of heavy metals. However, the presence of pesticide active ingredients such as cyfluthrin, endosulfan-alpha, endosulfan-beta, profenosfos, tihan, atrazine, gala super and glycel clearly indicates that these surface waters are subject to agricultural contamination.

Factors Contributing to Contamination of Street Foods in Bamako, Mali

The World Health Organization states that foodborne diseases are a worldwide public health issue. Although street foods can provide nutritious and affordable ready-to-eat meals for city dwellers, their health risks can outweigh the benefits. A cross-sectional study was conducted in the Bamako district, focusing on street food vendors near schools, universities, extensive markets, administrative centers, and major roads. We aimed to sample fifty (50) sellers per municipality, making 300 sellers for the Bamako district. We developed a survey sheet to collect data, and six teams rotated between the municipalities each month. Before starting the collection, the teams were provided administrative papers approved by the municipal authority. The survey revealed three types of sales sites: fixed (65%), semi-fixed (30%), and mobile (4.40%). The proportion of sellers was 26.8%, 23.2%, 19.7%, and 4.2% in municipalities III, IV, and I. In municipalities I, II, III, IV, and VI, respectively, 92%, 95.70%, 93%, 87.2%, and 100% of the sellers were female. The age distribution of sellers was 65.63%, 46.81%, 40.82%, 38.30%, 36.17%, 36%, and 32% in the 25-34 and 35 - 44 age groups. Illiteracy rates were 59.20%, 61.70%, 55.30%, 75%, and 56% in municipalities I, II, III, IV, and VI, respectively. The study identified two categories of sellers: 48.3% in type 1 and 51.7% in type 2. The first category comprised 154 sellers, and the second 165 sellers. The survey found that 66.00%, 56.00%, 48.90%, 44.90%, 38.30%, and 34.40% of municipal V, VI, III, I, II, and IV sales sites were open-air. In municipality I, 63.30% of the sites were under hangars, while in municipalities II and IV, the corresponding percentages were 51.10% and 59.40%, respectively. Moreover, 46.00%, 31.90%, 31.30%, 30.60%, and 27.70% of the sites in municipalities VI, II, IV, I, and III were located next to gutters. In conclusion, this study identified several factors that could compromise the quality of street foods sold in the six municipalities of Bamako.

Phytoremediation Strategies for Heavy Metal Contamination: A Review on Sustainable Approach for Environmental Restoration

Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.

Long-term hydrochemical monitoring and geothermometry:understanding groundwater salinization and thermal fluid contamination in Mila’s basin,Northeastern Algeria

The regular hydrochemical monitoring of groundwater in the Mila basin over an extended period has provided valuable insights into the origin of dissolved salts and the hydrogeochemical processes controlling water salinization.The data reveals that the shallow Karst aquifer shows an increase in TDS of 162 mg L^(-1) while the ther-mal carbonate aquifer that is also used for drinking water supply exhibits an increase of 178 mg L^(-1).Additionally,significant temperature variations are recorded at the sur-face in the shallow aquifers and the waters are carbo-gaseous.Analysis of dissolved major and minor elements has identified several processes influencing the chemical composition namely:dissolution of evaporitic minerals,reduction of sulphates,congruent and incongruent car-bonates’dissolution,dedolomitization and silicates’weathering.The hydrogeochemical and geothermometric results show a mixing of saline thermal water with recharge water of meteoric origin.Two main geothermalfields have been identified,a partially evolved water reservoir and a water reservoir whosefluid interacts with sulphuric acid(H_(2)S)of magmatic origin.These hot waters that are char-acterized by a strong hydrothermal alteration do ascend through faults and fractures and contribute to the contamination of shallower aquifers.Understanding the geothermometry and the hydrogeochemistry of waters is crucial for managing and protecting the quality of groundwater resources in the Mila basin,in order to ensure sustainable water supply for the region.A conceptual model for groundwater circulation and mineralization acquisition has been established to further enhance under-standing in this regard.

Q-Learning-Based Pesticide Contamination Prediction in Vegetables and Fruits

Pesticides have become more necessary in modern agricultural production.However,these pesticides have an unforeseeable long-term impact on people's wellbeing as well as the ecosystem.Due to a shortage of basic pesticide exposure awareness,farmers typically utilize pesticides extremely close to harvesting.Pesticide residues within foods,particularly fruits as well as veggies,are a significant issue among farmers,merchants,and particularly consumers.The residual concentrations were far lower than these maximal allowable limits,with only a few surpassing the restrictions for such pesticides in food.There is an obligation to provide a warning about this amount of pesticide use in farming.Previous technologies failed to forecast the large number of pesticides that were dangerous to people,necessitating the development of improved detection and early warning systems.A novel methodology for verifying the status and evaluating the level of pesticides in regularly consumed veggies as well as fruits has been identified,named as the Hybrid Chronic Multi-Residual Framework(HCMF),in which the harmful level of used pesticide residues has been predicted for contamination in agro products using Q-Learning based Recurrent Neural Network and the predicted contamination levels have been analyzed using Complex Event Processing(CEP)by processing given spatial and sequential data.The analysis results are used to minimize and effectively use pesticides in the agricultural field and also ensure the safety of farmers and consumers.Overall,the technique is carried out in a Python environment,with the results showing that the proposed model has a 98.57%accuracy and a training loss of 0.30.

Solvent extraction and separation of cobalt from leachate of spent lithium-ion battery cathodes with N263 in nitrite media

To effectively separate and recover Co(Ⅱ) from the leachate of spent lithium-ion battery cathodes,we investigated solvent extraction with quaternary ammonium salt N263 in the sodium nitrite system.NO_(2)^(-)combines with Co(Ⅱ) to form an anion [Co(NO_(2))_(3)]^(-),and it is then extracted by N263.The extraction of Co(Ⅱ) is related to the concentration of NO_(2)^(-).The extraction efficiency of Co(Ⅱ) reaches the maximum of99.16%,while the extraction efficiencies of Ni(Ⅱ),Mn(Ⅱ),and Li(Ⅰ) are 9.27%-9.80% under the following conditions:30vol% of N263 and15vol% of iso-propyl alcohol in sulfonated kerosene,the volume ratio of the aqueous-to-organic phase is 2:1,the extraction time is 30 min,and1 M sodium nitrite in 0.1 MHNO_(3).The theoretical stages require for the Co(Ⅱ) extraction are performed in the McCabe–Thiele diagram,and the extraction efficiency of Co(Ⅱ) reaches more than 99.00% after three-stage counter-current extraction with Co(Ⅱ) concentration of 2544mg/L.When the HCl concentration is 1.5 M,the volume ratio of the aqueous-to-organic phase is 1:1,the back-extraction efficiency of Co(Ⅱ)achieves 91.41%.After five extraction and back-extraction cycles,the Co(Ⅱ) extraction efficiency can still reach 93.89%.The Co(Ⅱ) extraction efficiency in the actual leaching solution reaches 100%.

Controllable NO Release for Catheter Antibacteria from Nitrite Electroreduction over the Cu-MOF

Implant-associated infections caused by biomedical catheters severely threaten patients'health.The use of electrochemical control on NO release from benign nitrite equipped in the catheter can potentially resolve this issue with excellent biocompatibility.Inspired by nitrite reductase,a Cu-BDC(BDC:benzene-1,4-dicarboxylic acid)catalyst with coordinated Cu(Ⅱ)sites was constructed as a heterogeneous electrocatalyst to control nitrite reduction to nitric oxide for catheter antibacteria.The combined results of in situ and ex situ tests unveil the key function of interconversion between Cu(Ⅱ)and Cu(Ⅰ)species in NO_(2)^(-)reduction to NO.After being incorporated into the actual catheter,the Cu-BDC catalyst exhibits high electrocatalytic activity toward NO_(2)^(-)reduction to NO and excellent antibacteria efficacy with a sterilizing rate of 99.9%,paving the way for the development of advanced metal-organic frameworks(MOFs)electrocatalysts for catheter antibacteria.

Process Optimization and Modeling by Response Surface Methodology of Nitrite Electro-Reduction by Ti/RuO2 + IrO2 Electrode

Electrochemical reduction is one of the most suitable methods for the treatment of highly nitrate-contaminated solutions. This work focuses on the optimization of parameters influencing the electrochemical denitrification of water by the Ti/RuO2 + IrO2 electrode. The methodological approach used consists in carrying out a series of electrolysis by scrutinizing the reaction selectivity according to the experimental conditions. For this study, the ions concentrations before and after electrolysis were determined by UV-vis absorption spectroscopy. The results of the process optimization showed that the electrochemical reduction ofis efficient at neutral pH after 120 mn of electrolysis at -100 mA. In contrast to works found in the literature, this study highlighted the process modeling that could open interesting perspectives to develop new treatment methods of polluted waters.

Acute hemolytic anemia in a 34-year-old man after inhalation of a volatile nitrite “popper” product

Inhaled nitrites have been used recreationally for centuries,particularly among men who have sex with men (MSM).^([1])After inhalation,this substance quickly enters the blood;within seconds,it can produce a temporary sense of warmth and pleasure,and relax the anal sphincter to relieve the pain of anal sex.^([2,3])“Popper”and“rush”are slang terms given to drugs of the chemical class called amyl nitrite or isobutyl nitrite.Nitrites oxidize hemoglobin to methemoglobins and may increase proteolytic susceptibility of hemoglobin,leading to oxidative hemolysis.Thus,their use is associated with methemoglobinemia and hemolytic anemia,^([4])although nitrite-induced hemolytic anemia has been described only in rare cases (supplementary Table 1).^([4-9])Herein,we report a case of acute hemolytic anemia associated with the use of amyl nitrite.

Sources and transformations of nitrite in the Amundsen Sea in summer 2019 and 2020 as revealed by nitrogen and oxygen isotopes

In this study,the nitrogen and oxygen isotope compositions of nitrite in the upper 150 m water column of the Amundsen Sea in the summer of 2019 and 2020 were measured to reveal the distribution and transformation of nitrite in the euphotic zone of the Southern Ocean.We found that primary nitrite maxima(PNMs)are widely present in the Amundsen Sea,where the depth of occurrence deepens from east to west and nitrite concentrations increases.Evidence from dual isotopes suggests that the formation of PNMs in all regions of the Amundsen Sea is dominated by ammonia oxidation.More importantly,the nitrogen and oxygen isotope compositions of nitrite in the Amundsen Sea mixed layer are abnormal,and their depth profiles are mirror symmetrical.Isotopic anomalies exhibit spatial variations,with central surface water having the lowest nitrogen isotope composition(−89.9‰±0.2‰)and western surface water having the highest oxygen isotope composition(63.3‰±0.3‰).Isotopic exchange reaction between nitrate and nitrite is responsible for these isotope anomalies,as both nitrogen and oxygen isotopes have large isotopic fractionation and opposite enrichment effects.This proves that isotopic exchange reaction operates extensively in different regions of the Amundsen Sea.Our study highlights the unique role of dual isotopes of nitrite in deepening the understanding of nitrogen cycle.Further studies on ammonia oxidation and isotopic exchange between nitrate and nitrite are warranted in the future to understand their roles in the nitrogen cycle in the Southern Ocean.

Highly Sensitive Electrochemical Detection of Nitrite Based on Cationic Surfactant Modification of Conductive Carbon Black

Nitrite is a commonly used additive in cured foods and its sensitive detection is important to human health.In this work,a simple but sensitive electrochemical sensor for nitrite was developed.Conductive carbon black(VXC-72R)functionalized with a cationic surfactant cetyltrimethylammonium bromide(CTAB)was used as an electrode material,and was coated on a glassy carbon electrode(GCE)to fabricate the electrochemical sensor(CTAB/VXC-72R/GCE)for nitrite.Zeta potential characterization and a series of electrochemical tests were carried out on several materials.It was found that the present sensor showed an enhanced sensitivity towards nitrite detection due to the enhanced surface positive charge revealed by the Zeta potential.Under optimal conditions,the ranges of good linear relationship between the peak current and the nitrite concentration were obtained to be 0.5-5.0μmol/L and 5.0-1087.0μmol/L with a lower detection limit of 0.30μmol/L.It was also successfully used for the determination of nitrite in cured food samples with excellent reproducibility,stability and selectivity.

Acoustic contamination assessment during the transition between the COVID-19 restrictions and reactivation:A exploratory analysis in Guayaquil

Noise pollution is becoming a critical health risk for city life.In 2020,the COVID-19 pandemic forced many cities to implement several mobility restrictions.These restrictions changed human activity patterns and decreased the noise levels and noise pollution that often affect urban settings.As the number of infections decreased,so did the outdoor activities,influencing the population’s perception of noise.This paper aims to evaluate the changes in noise levels associated with mobility restrictions between 2020 and 2021 in Guayaquil,Ecuador.This study used crowdsourcing with the help of smartphones and mobile applications to collect geo-referenced environmental noise data.The data was used to generate noise maps in different time frames.Finally,noise level maps were created using GIS-based tools to identify the urban areas that experienced the highest noise level variation during the study period.The results show that the most significant noise increase occurred at night.Furthermore,when analyzing noise level changes in different urban areas,the western area of Guayaquil was the one that experienced the most significant noise level variation.Findings inform the perception of noise pollution and could potentially serve as a reference for decision-makers during the proposal of public policies that ensure a better quality of life for its citizens.