Parameters Influencing the Noise Emission of Planing Machines

Regarding woodworking machines, machine acoustics are of particular significance due to the high noise emission of these machines. Among other things, this can be attributed to the adoption of the European Commission Machinery Directive as a national law, which demands protection against noise emission in the design phase of new machines. In order to accomplish this, it is necessary to examine and locate the causes of emissions on existing machines. In this paper, the sound source is located through sound intensity measurements, using planing machines as an example, which are particularly noise-intensive woodworking machines. In addition, different influencing parameters on noise emission are analyzed, such as manual and automatic feed, rotational speed and the influence of the type of wood of the workpiece.

Noise emission of concrete pavement surfaces produced by diamond grinding

In Germany, diamond grinding is frequently used to improve the evenness and skid resistance of concrete pavement surfaces. Since diamond grinding has been observed to affect tyre/pavement noise emission favourably, the relationship among surface texture, concrete composition and noise emission of concrete pavement surfaces has been sys- tematically investigated. The simulation program SPERoN was used in a parameter study to investigate the main factors which affect noise emission. Based on the results of the simulations, textured concrete surfaces were produced by using a laboratory grinding machine. As well as the composition of the concrete, the thickness and spacing of the diamond blades were varied. The ability of the textured surfaces to reduce noise emission was assessed from the texture characteristics and air flow resistance of textured surfaces measured in the laboratory. It was found that concrete composition and, in particular, the spacing of the blades affected the reduction in noise emission considerably. The noise emission behaviour of numerous road sections was also considered in field investigations. The pavement surfaces had been textured by diamond grinding during the last years or decades. The results show that diamond grinding is able to provide good, durable noise- reducing properties. Several new pavement sections were investigated using thicknesses and spacings of the blades similar to those used in the laboratory to optimize noise emission reduction. It is concluded that diamond grinding is a good alternative to exposed aggregate concrete for the production of low-noise pavement surfaces.

Low-Frequency Noise in Gate Tunable Topological Insulator Nanowire Field Emission Transistor near the Dirac Point

Low-frequency flicker noise is usually associated with material defects or imperfection of fabrication procedure. Up to now, there is only very limited knowledge about flicker noise of the topological insulator, whose topologically protected conducting surface is theoretically immune to back scattering. To suppress the bulk conductivity we synthesize antimony doped Bi2Se3 nanowires and conduct transport measurements at cryogenic temperatures. The low-frequency current noise measurement shows that the noise amplitude at the high-drain current regime can be described by Hooge＇s empirical relationship, while the noise level is significantly lower than that predicted by Hooge＇s model near the Dirac point. Furthermore, different frequency responses of noise power spectrum density for specific drain currents at the low drain current regime indicate the complex origin of noise sources of topological insulator.

Texturing and evaluation of concrete pavement surface:A state-of-the-art review

Concrete pavement is accompanied by two major functional properties,namely noise emission and friction,which are closely related to pavement surface texture.While several technologies have been developed to mitigate tirepavement noise and improve driving friction by surface texturization,limited information is available to compare the advantages and disadvantages of different surface textures.In this study,a state-of-the-art and state-of-thepractice review is conducted to investigate the noise reduction and friction improvement technologies for concrete pavement surfaces.The commonly used tests for characterizing the surface texture,skid resistance,and noise emission of concrete pavement were first summarized.Then,the texturing methods for both fresh and hardened concrete pavement surfaces were discussed,and the friction,noise emission and durability performances of various surface textures were compared.It is found that the next generation concrete surface(NGCS)texture generally provides the best noise emission performance and excellent friction properties.The exposed aggregate concrete(EAC)and optimized diamond grinding textures are also promising alternatives.Lastly,the technical parameters for the application of both diamond grinding and diamond grinding&grooving textures were recommended based on the authors'research and practical experience in Germany and the US.This study offers a convenient reference to the pavement researchers and engineers who seek to quickly understand relevant knowledge and choose the most appropriate surface textures for concrete pavements.

Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection,quantification,and prediction of damages.Early detection of faults may allow the downtime of maintenance to be rescheduled,thus preventing sudden shutdown of machines.In cylinder pressure developed,vibrations and noise emissions data provide a rich source of information about condition of engines.Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue.The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines.The effects of changing various fuel injection parameters was analyzed.Scope of using non-intrusive technique has been analyzed by changing locations of microphone.Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up.Various frequency ranges of contributing noise and vibration sources were identified.Time-Frequency analysis showed the onset of various cyclic.Based on the identification of various frequency bands,it is possible to device suitable filters in order to extract more information.

The Prognosis of Acoustic Conditions in the Centre of Szczecinek

The article presents the results of traffic noise measurement research conducted in Szczecinek Center. The measurements were supported by European initiative called CIVITAS Reanissance. The measurements results were used for preparation of documents related to Sustainable Urban Transport Mobility Plan and Noise Action Plan. Traffic congestion is the main source of noise emission in the center Szczecinek. So there was a need to assess the noise emission level. Noise measurements were part of the measure implemented in Szczecinek during the CIVITAS project. It was made during implementation one of the ten measures implemented in Szczecinek. The main objectives of the measure were preparation and acoustic maps of the city center and prognosis the change of traffic noise in the future.

Noise reduction algorithm of corrosion acoustic emission signal based on short-time fractal dimension enhancement

The general corrosion and local corrosion of Q235 steel were tested by acoustic emission （AE） detecting system under 6% FeCl3.6H2O solution to effectively detect the corrosion acoustic emission signal from complex background noise. The short-time fractal dimension and discrete fractional cosine transform methods are combined to reduce noise. The input SNR is 0-15 dB while corrosion acoustic emission signals being added with white noise, color noise and pink noise respectively. The results show that the output signal-to-noise ratio is improved by up to 8 dB compared with discrete cosine transform and discrete fractional cosine transform. The above-mentioned noise reduction method is of significance for the identification of corrosion induced acoustic emission signals and the evaluation of the metal remaining life.