Influence of Non-Natural Ageing Temperature on the Microstructural Characteristics and Mechanical Properties of Cast Aluminum 6063 Alloy

This research considered the effect of non-natural aging on the microstructural characteristics and mechanical properties of as-cast aluminum 6063 alloys. The samples were developed through a sand casting process and machined into tensile and impact test samples before carrying out solution heat treatment at 550?C (0.83 Tm) on two parts of the samples while retaining one part as the control. The two parts were further divided into sets denoted A and B and were aged at 180?C (0.27 Tm) and 160?C (0.24 Tm), respectively, for 12 hours. The results showed that sample A has the optimal yield strength and ultimate tensile strength of 192 and 206 MPa, respectively. Likewise, the sample gave the highest impact strength value of about 9.63 J/mm2. The observed results were supported by the optical micrograph, which revealed that the sample has evenly dispersed precipitates in its microstructure. This is deemed responsible for the observed increase in strength of the sample.

Effect of Soursop Puree and Gum Arabic on the Sensory Properties of Non-Dairy Coconut Milk-Based Ice Cream

Coconut (Cocos nucifera) milk-based ice cream is one of the innovative non-dairy milk products gaining popularity among consumers. The objective was to develop coconut milk-based ice cream incorporated with soursop (Annona muricata) fruit puree and gum Arabic from Acacia senegal var. kerensis, conduct a sensory evaluation using descriptive tests by trained panelists (n = 9) then evaluate for consumer acceptability by semi trained panelists (n = 30). A seven-point hedonic scale for colour, taste, flavour, texture and overall acceptability was used. The data obtained was subjected to analysis of variance (ANOVA) and the means were separated to determine their significance differences. Principal Component Analysis (PCA) was done for factor reduction to make it easy for the multi-dimensional descriptive data to be interpreted. PCA results indicated that unit increase in soursop and gum Arabic in the ice cream led to 83.1% increase in starchy taste, 78.3% increase in consistency and 73.6% decrease in coconut aroma. For consumer acceptability test, the obtained results showed that, soursop puree addition at successive levels led to a statistically significant effect (p < 0.05) on colour, flavour, texture, taste and overall acceptability while of gum Arabic incorporation was not significant (p > 0.05) for all attributes. The effect due to interaction between gum Arabic and soursop puree at the different levels however was significant for colour, flavour and texture but not significant for taste and overall acceptability. Our results therefore point to a potential application of soursop fruit and gum Arabic as alternative ingredients in the manufacture of a non-dairy ice cream with desirable sensory properties that would expand the variety of options consumers can choose from.

Effect of annealing parameter on microstructure and magnetic properties of cold rolled non-oriented electrical steel

The microstructure and magnetic properties of cold rolled non-oriented electrical steel,annealed at 200-1 000 ℃ for 0-240 min with different heating rates,were investigated by optical microscopy,scanning electron microscopy,Epstein frame,and transmission electron microscopy. The results show that the magnetic properties of cold rolled non-oriented electrical steel can be improved by controlling the annealing process to obtain uniform coarse grains with critical sizes after the recovery,recrystallization and growth of grains. Additionally,the annealing temperature influences the magnetic properties more significantly than annealing time,and with the increase of heating-up rate during the annealing process,the magnetic properties of the cold rolled non-oriented electrical steel increase.

Effect of Boron Content on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels

The effects of boron content in the range of 0-0.0082 wt%, on the inclusion type, microstructurc, texture and magnetic properties of non-oriented electrical steels have been studied. After final annealing, the addition of excess boron（w（B0〉0.004 1 wt%） led to the formation of Fe2B particles. As boron content increased, grain size increased and reached a maximum in steel with 0.004 1 wt% boron. Furthermore, steel containing 0.004 1 wt% boron had the strongest { 100} fiber texture, Goss texture and the weakest { 111 } fiber texture among the five tested steels. Flux density firstly rapidly increased and then suddenly decreased with increasing boron content and reached a maximum in steel with 0.004 1 wt% boron. Conversely, core loss first sharply decreased and then abruptly increased with the increase of boron content and reached a minimum in steel containing 0.004 1 wt% boron. Steel containing 0.004 1 wt% boron obtained the best magnetic properties, predominantly through the development of optimum grain size and favorable texture.

A Novel 3D Non-Stationary UAV-MIMO Channel Model and Its Statistical Properties

The wireless communication systems based on Unmanned Aerial Vehicles(UAVs) have found a wide range of applications recently. In this paper, we propose a new three-dimensional(3 D) non-stationary multiple-input multiple-output(MIMO) channel model for the communication links between the UAV and mobile terminal(MT). The new model originates the traditional geometry-based stochastic models(GBSMs) but considers the non-stationary propagation environment due to the rapid movements of the UAV, MT, and clusters. Meanwhile, the upgrade time evolving algorithms of time-variant channel parameters, i.e., the path number based on birth-death processes of clusters, path delays, path powers, and angles of arrival and departure, are developed and optimized. In addition, the statistical properties of proposed GBSM including autocorrelation function(ACF), cross-correlation function(CCF), and Doppler power spectrum density(DPSD) are investigated and analyzed. Simulation results demonstrate that our proposed model provides a good agreement on the statistical properties with the corresponding derived theoretical ones, which indicates its usefulness for the performance evaluation and validation of the UAV based communication systems.

Stochastic properties of tumor growth with coupling between non-Gaussian and Gaussian noise terms

Dynamical behavior of a tumor-growth model with coupling between non-Gaussian and Gaussian noise terms is investigated. The departure from the Gaussian noise can not only reduce the probability of tumor cells in the active state, induce the minimum of the average tumor-cell population to move toward a smaller non-Gaussian noise, but also decrease the mean first-passage time. The increase of white-noise intensity can increase the tumor-cell population and shorten the mean first-passage time, while the coupling strength between noise terms has opposite effects, and the noise correlation time has a very small effect.

Effects of calcium treatment on non-metallic inclusions and magnetic properties of non-oriented silicon steel sheets

Based on the industrial production of non-oriented silicon steel,calcium treatment by CaSi wire feeding during the RH refining process was studied. The thermodynamics of CaS inclusion formation was analyzed, and the morphology and the size distribution were observed. Furthermore, the change in inclusion characteristics after calcium treatment and the effect of calcium treatment on magnetic properties were discussed. The results show that the formation of MnS and A1N inclusions were restrained, and the aggregating, floating and removing of microinclusions after calcium treatment were effectively promoted. The cleanliness of liquid steel was obviously increased. The main type of inclusions was single phase of CaO, with some complex inclusions composed of CaO, SiO2 and MgO. No CaS inclusion was observed after an appropriate calcium treatment. The size of all inclusions was distributed in the range of 2 - 20 μm, and the number was about 1.8 × 10^5/mm3. In addition, as an increasing amount of calcium was added,the core loss gradually decreased to a stable level, and the magnetic induction decreased quickly after a slow increase. The optimal calcium treatment mode depends on the chemical composition of steel.

Steady-State Cornering Properties of a Non-pneumatic Tire with Mechanical Elastic Structure

Mechanical elastic wheel(ME-wheel)is a new type of non-inflatable safety tyre,and the structure is significantly different from traditional pneumatic tyre.In order to investigate cornering properties of ME-wheel,experimental research on mechanics characteristics of ME-wheel under steady-state cornering conditions are carried out.The test of steady-state cornering properties of ME-wheel at different experimental parameter conditions is conducted by test bench for dynamic mechanical properties of tyre.Cornering property curves are used to analyze the steady-state cornering properties of ME-wheel,namely the variation tendency of lateral force or aligning torque with the increase of side-slip angle.Moreover,evaluation indexes for cornering properties of ME-wheel are extracted and the effect of different experimental parameters(including vertical load,friction coefficient,and speed)on cornering properties of ME-wheel is contrastively analyzed.The proposed research can provide certain reference to facilitate structure parameters and cornering properties optimizing process of ME-wheel.

Photon-added and photon-subtracted displaced Fock states and their non-classical properties

A new kind of quantum optical state, photon-added and -subtracted displaced Fock states, is introduced by applying the inverse of bosonic creation and annihilation operators to displaced Fock states. The quantum statistical properties of these states are investigated by numerical methods. Numerical results indicate that these states reveal some interesting non-classical properties, such as anti-bunching effects, sub-Poisson distributions and negativities of their Wigner functions.

Effect of retained austenite and nonmetallic inclusions on the thermal/electrical properties and resistance spot welding nuggets of Si-containing TRIP steels

Five advanced high-strength transformation-induced plasticity(TRIP) steels with different chemical compositions were studied to correlate the retained austenite and nonmetallic inclusion content with their physical properties and the characteristics of the resistance spot welding nuggets. Electrical and thermal properties and equilibrium phases of TRIP steels were predicted using the JMatPro? software. Retained austenite and nonmetallic inclusions were quantified by X-ray diffraction and saturation magnetization techniques. The nonmetallic inclusions were characterized by scanning electron microscopy. The results show that the contents of Si, C, Al, and Mn in TRIP steels increase both the retained austenite and the nonmetallic inclusion contents. We found that nonmetallic inclusions affect the thermal and electrical properties of the TRIP steels and that the differences between these properties tend to result in different cooling rates during the welding process. The results are discussed in terms of the electrical and thermal properties determined from the chemical composition and their impact on the resistance spot welding nuggets.

Analysis and Evaluation of the Global Aerosol Optical Properties Simulated by an Online Aerosol-coupled Non-hydrostatic Icosahedral Atmospheric Model

Aerosol optical properties are simulated using the Spectral Radiation Transport Model I~）r Aerosol Species （SPRINTARS） coupled with the Non-hydrostatic ICosahedral Atmospheric Model （NICAM）. The 3-year global mean all-sky aerosol optical thickness （AOT） at 550 nm, theAngstr/Sm Exponent （AE） based on AOTs at 440 and 870 nm, and the single scattering albedo （SSA） at 550 nm are estimated at 0.123, 0.657 and 0.944, respectively. For each aerosol species, the mean AOT is within the range of the AeroCom models. Both the modeled all-sky and clear-sky results are compared with observations from the Moderate Resolution Imaging Spectroradiometer （MODIS） and the Aerosol Robotic Network （AERONET）. The simulated spatiotemporal distributions of all-sky AOTs can generally reproduce the MODIS retrievals, and the correlation and model skill can be slightly improved using the clear-sky results over most land regions. The differences between clear-sky and all-sky AOTs are larger over polluted regions. Compared with observations from AERONET, the modeled and observed all-sky AOTs and AEs are generally in reasonable agreement, whereas the SSA variation is not well captured. Although the spatiotemporal distributions of all-sky and clear-sky results are similar, the clear-sky results are generally better correlated with the observations. The clear-sky AOT and SSA are generally lower than the all-sky results, especially in those regions where the aerosol chemical composition is contributed to mostly by sulfate aerosol. The modeled clear-sky AE is larger than the all-sky AE over those regions dominated by hydrophilic aerosol, while the＇opposite is found over regions dominated by hydrophobic aerosol.

Synthesis and Properties of Non-isocyanate Crystallizable Aliphatic Thermoplastic Polyurethanes

A simple non-isocyanate route synthesizing thermoplastic polyurethanes（TPUs） with good thermal and mechanical properties is described. Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate with 1,4-butanediol and 1,6-hexanediol was conducted at different molar ratios under the catalysis of tetrabutyl titanate. A series of crystallizable non-isocyanate TPUs with high molecular weight were prepared. The TPUs were characterized by gel permeation chromatography, FT-IR, 1 H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X-ray diffraction, AFM, and tensile tests. The TPUs exhibited Mn ranging from 12 500 to 26 400 g/mol, Mw from 16 700 to 56 400 g/mol, Tm up to 151.4 °C, and initial decomposition temperature over 241.8 °C. Their tensile strength reached 42.99 MPa with a strain at break of 30.00%. TPUs constructed simply with butylene, hexylene, and urethane linkages were successfully synthesized through a non-isocyanate route.

High Temperature Properties and Microstructures of Si_3N_4 with AZ-Type Non-Toxic, Non-Oxide Additives

A new type of Si3N4 ceramics (ZAN) is developed in our laboratory. Densification of ZAN is promoted by non-toxic, non-oxide AZ-type additives. In this work high temperature (HT) properties and microstructures of ZAN are investigated.

Simulation Model of Mechanical Properties of Point - Bonded Nonwovens

A computer model for studying the mechanical properties of point - bonded nonwovens is established. The simulation tensile curve of a nonwoven fabric may be obtained based on relaxation procedure when the mechanical properties of fibers, the arrangement of bond points in the fibrous web and specimen size are inputted into the computer. Relaxation method and relevant algorithms of computer simulation are described in detail. The validity of the model is also demonstrated.

Effects of non-Gaussian noise on the dynamical properties of a logistic system

The dynamical properties of a tumor cell growth system described by the logistic system with coupling between non- Gaussian and Gaussian noise terms are investigated. The effects of the nonextensive index q on the stationary properties and the transient properties are discussed, respectively. The results show that the nonextensive index q can induce the tumor cell numbers to decrease greatly in the case of q 〉 1. Moreover, the switch from the steady stable state to the extinct state is speeded up as the increases of q, and the tumor cell numbers can be more obviously restrained for a large value of q. The numerical results are found to be in basic agreement with the theoretical predictions.

Recovery and Biological Properties of Nitrate Non-utilizing Mutants of Rice Blast,Magnaporthe grisea

Eleven nitrate non-utilizing (nit) mutants were recovered from six isolates of Magnaporthe grisea cultured on MM media -amended with 60 g/L potassium chlorate, with a frequency of 1.42 %. Some biological properties, such as growth rate, growth biomass, cultural characters, conidial production, sexual reproduction ability, and pathogenicity were compared between nit mutants and their parent isolates. Results showed that all the nit mutants were resistant to chlorate. Some important biological properties such as the growth rate on YPSA, conidial production ability on TPSA, pathogenicity, had no significant differences between nit mutants and their parent isolates. Mating type didn't change, but perithecia production ability of fertile isolates changed significantly as compared with that of their parent isolates. Therefore, the nit can be used as a genetic marker to study the genetics such as pathogenicity, fungicide resistance in Magnaporthe grisea.

Experimental study of the effects of non-uniformly distributed fine soil on mechanical properties of Shenyang–Dandong Railway coarse-grained soil

The stress produced by repeated train loads decreases with increasing railway subgrade bed depth, and slightly weathered coarse particles of subgrade bed fillings can be broken at different levels under continuous load. Thus, the mass of fine soil, with a diameter of not more than 0.075 mm, is different at different depths. Fine soil is also sensitive to frost heave and thaw settlement. In order to study the effects of non-uniformly distributed fine soil on the mechanical properties of coarse-grained soil of the Shenyang-Dandong Railway, triaxial tests were conducted with three types of specimens, un- dergoing six freeze-thaw cycle numbers （0, 1, 3, 7, 9, 12） and three confining pressures （100, 200, 300 kPa）. The freezing temperature is -5 ~C and the thawing temperature is ＋15 ~C. The stress-strain behavior, static strength, resilient modulus, cohesive force and the angle of internal friction were measured for different tested specimens. As a result, the law of static strength and resilient modulus of different specimens following the increase of freeze-thaw cycles under three confining pressures is obtained. The changing law of cohesive force and friction angle of three specimens following the increase of freeze-thaw cycles is also calculated, and the different results of different specimens are also compared.

Synthesis, Structure and Third-order Non-linear Optical Properties of Tungsten Dioxo Complex with 8-Hydroxyquinoline Ligand WO_2(C_9H_6NO)_2

Tungsten dioxo complex WO 2(C 9H 6NO) 2 was obtained via the low temperature solid-state reaction of(NH 4) 2WS 4, 8-hydroxyquinoline(8-hq) and(CH 3) 4NI, and it was characterized by means of elemental analyses, IR spectroscopy and X-ray diffraction analysis. The crystal of the title compound belongs to monoclinic, space group C2/c, with the crystal cell parameters: a=1.3316(3) nm, b=0.94444(19) nm, c=1.3485(3) nm, β=109.66(3)°, V=1.5970(6) nm 3, Z=6. The title compound possesses a supramolecular structure formed through hydrogen bonds and π-π stacking interactions. The third-order non-linear optical(NLO) properties of the title compound were also investigated. The third-order non-linear absorption coefficient α 2 and refractive index n 2 are 0.85×10 -11 m/W -1 and -1.5×10 -19 m 2/W, respectively. The third-order non-linear susceptibility χ (3) is 3.03×10 -13 esu for 3.8×10 -5 mol/L sample concentration.

植物油基聚氨酯包膜肥料研究进展

缓释肥包膜材料采用的聚氨酯主要由石油基原料制备,由于石油基聚氨酯成本高、环境风险较大,近年来逐渐被生物基聚氨酯所取代。在众多的生物基材料中,植物油因价格低廉、来源广泛、无毒性、可生物降解等特点,成为缓控释肥料膜材的研究热点。本文分别综述了植物油基多元醇的制备方法,植物油基聚氨酯包膜的分类,植物油基聚氨酯包膜肥料的改性及应用。环氧开环、酯交换反应、氨解法、加氢甲酰化以及臭氧氧化还原是植物油改性制备植物油基多元醇的常用技术手段。丙烯酸酯、环氧树脂、有机硅、氟改性、纳米材料等是植物油基聚氨酯包膜材料改性的常用原料,试验证明植物油基聚氨酯包膜肥料具有减少氨挥发、氮淋溶,提高氮素利用效率的作用。如何提高植物油基聚氨酯交联密度、降低生产成本、深入揭示缓释机理以及扩大在大田试验的应用场景将是今后研究的重点。

冷轧方式与退火温度对无取向硅钢组织、织构及磁性能的影响

以连续式和可逆式冷轧无取向硅钢为研究对象,对其进行退火实验,采用金相显微镜、X射线衍射仪(XRD)表征分析不同冷轧方式无取向硅钢在不同退火温度(920~1070℃)下的组织和织构,探讨轧制方式与退火温度对无取向硅钢磁性能的影响。结果表明:在920~1070℃退火后,连续式冷轧样品平均晶粒尺寸分布在20.7~134.4μm范围,可逆式冷轧样品平均晶粒尺寸分布在17.3~155.5μm范围,随退火温度的提升,2种冷轧方式退火板晶粒总体上均在不断长大;冷轧板织构主要由强的旋转立方织构组成,可逆式和连续式冷轧样品退火板织构以γ纤维和α纤维织构为主,γ纤维织构主要聚集在{111}<112>处,α纤维织构主要聚集在{111}<110>处,γ纤维织构强度随退火温度升高而显著降低,α纤维、Goss和旋转立方织构强度变化很小;可逆式与连续式冷轧板{111}<110>织构强度相近,可逆式冷轧退火板{111}<112>织构强度始终高于连续式冷轧退火板。1040℃退火时,可逆式和连续式冷轧退火板的P_(1.5/50)(50 Hz下,磁感应强度为1.5 T时的损耗)均达最低,分别为2.512,2.445 W/kg;1070℃退火时,可逆式与连续式冷轧退火板的P_(1.5/50)有所增长,最终分别为2.625,2.494 W/kg。随退火温度升高,2种冷轧方式退火板的P_(1.5/50)均先降后升,且连续式冷轧退火板的P_(1.5/50)始终更低、B_(50)更高(磁场强度为5000 A/m时的磁感应强度)。