This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology invol...This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology involves finite element analysis; sta- tistical models for uncertainty in material properties, crack size, fracture toughness and loads; and standard reliability methods for evaluating probabilistic characteristics of linear elastic fracture parameter. The uncertainty in the crack size can have a significant effect on the probability of failure, particularly when the crack size has a large coefficient of variation. Numerical example is presented to show that probabilistic methodology based on Monte Carlo simulation provides accurate estimates of failure prob- ability for use in linear elastic fracture mechanics.展开更多
The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special fe...The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors （SIFs） directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.展开更多
It is observed that the parameter of seismic inhomogeneous degree (GL value) calculated from the earthquake catalog shows obvious abnormal changes prior to strong earthquakes, indicating the state change of local seis...It is observed that the parameter of seismic inhomogeneous degree (GL value) calculated from the earthquake catalog shows obvious abnormal changes prior to strong earthquakes, indicating the state change of local seismic activity. This paper focuses on the mechanism for the abnormal changes of the GL values based on the sequences of acoustic emission for three types of rock samples containing macro-asperity fracture; compressional en-echelon fracture and model-III shear fracture. The results show that for the three types of rock samples, there are continuous abnormal changes of GL value (>1) just before the non-elastic deformation occurs or during the process of nucleation prior to the instability. Based on the experimental results, it seems that the process of creep sliding and resistance-uniformization along fault zone is the possible mechanism for the abnormal changes of GL value before rock fractures.展开更多
This paper investigates the equilibrium of fractional derivative and 2nd derivative, which occurs if the original function is damped (damping of a power-law viscoelastic solid with viscosities η of 0 ≤ η ≤ 1), whe...This paper investigates the equilibrium of fractional derivative and 2nd derivative, which occurs if the original function is damped (damping of a power-law viscoelastic solid with viscosities η of 0 ≤ η ≤ 1), where the fractional derivative corresponds to a force applied to the solid (e.g. an impact force), and the second derivative corresponds to acceleration of the solid’s centre of mass, and therefore to the inertial force. Consequently, the equilibrium satisfies the principle of the force equilibrium. Further-more, the paper provides a new definition of under- and overdamping that is not exclusively disjunctive, i.e. not either under- or over-damped as in a linear Voigt model, but rather exhibits damping phases co-existing consecutively as time progresses, separated not by critical damping, but rather by a transition phase. The three damping phases of a power-law viscoelastic solid—underdamping, transition and overdamping—are characterized by: underdamping—centre of mass oscillation about zero line;transition—centre of mass reciprocation without crossing the zero line;overdamping—power decay. The innovation of this new definition is critical for designing non-linear visco-elastic power-law dampers and fine-tuning the ratio of under- and overdamping, considering that three phases—underdamping, transition, and overdamping—co-exist consecutively if 0 < η < 0.401;two phases—transition and overdamping—co-exist consecutively if 0.401 < η < 0.578;and one phase— overdamping—exists exclusively if 0.578 < η < 1.展开更多
In this study, an attempt is made to determine the interaction effect of two closely spaced strip footings using Pasternak model. The study considers small strain problem and has been performed using linear as well as...In this study, an attempt is made to determine the interaction effect of two closely spaced strip footings using Pasternak model. The study considers small strain problem and has been performed using linear as well as nonlinear elastic analysis to determine the interaction effect of two nearby strip footings. The hyperbolic stress-strain relationship has been considered for the nonlinear elastic analysis. The linear elastic analysis has been carried out by deriving the equations for the interference effect of the footings in the framework of Pasternak model equation; whereas, the nonlinear elastic analysis has been performed using the finite difference method to solve the second order nonlinear differential equation evolved from Pasternak model with proper boundary conditions. Results obtained from the linear and the nonlinear elastic analysis are presented in terms of non-dimensional interaction factors by varying different parameters like width of the foundation, load on the foundation and the depth of the rigid base. Results are suitably compared with the existing values in the literature.展开更多
A brief account is provided on crack-tip solutions that have recently been published in the literature by employing the so-called GRADELA model and its variants. The GRADELA model is a simple gradient elasticity theor...A brief account is provided on crack-tip solutions that have recently been published in the literature by employing the so-called GRADELA model and its variants. The GRADELA model is a simple gradient elasticity theory involving one internal length in addition to the two Lame＇ constants, in an effort to eliminate elastic singularities and discontinuities and to interpret elastic size effects. The non-singular strains and non-singular （but sometimes singular or even hypersingular） stresses derived this way under different boundary conditions differ from each other and their physical meaning in not clear. This is discussed which focus on the form and physical meaning of non-singular solutions for crack-tip stresses and strains that are possible to obtain within the GRADELA model and its extensions.展开更多
A Fourier-Chebyshev spectral method is proposed in this paper for solving the cavitation problem in nonlinear elasticity. The interpolation error for the cavitation solution is analyzed, the elastic energy error estim...A Fourier-Chebyshev spectral method is proposed in this paper for solving the cavitation problem in nonlinear elasticity. The interpolation error for the cavitation solution is analyzed, the elastic energy error estimate for the discrete cavitation solution is obtained, and the convergence of the method is proved. An algorithm combined a gradient type method with a damped quasi-Newton method is applied to solve the discretized nonlinear equilibrium equations. Numerical experiments show that the Fourier-Chebyshev spectral method is efficient and capable of producing accurate numerical cavitation solutions.展开更多
文摘This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology involves finite element analysis; sta- tistical models for uncertainty in material properties, crack size, fracture toughness and loads; and standard reliability methods for evaluating probabilistic characteristics of linear elastic fracture parameter. The uncertainty in the crack size can have a significant effect on the probability of failure, particularly when the crack size has a large coefficient of variation. Numerical example is presented to show that probabilistic methodology based on Monte Carlo simulation provides accurate estimates of failure prob- ability for use in linear elastic fracture mechanics.
基金The project supported by the National Natural Science Foundation of China (50579081)the Australian Research Council (DP0452681)The English text was polished by Keren Wang
文摘The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors （SIFs） directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.
文摘It is observed that the parameter of seismic inhomogeneous degree (GL value) calculated from the earthquake catalog shows obvious abnormal changes prior to strong earthquakes, indicating the state change of local seismic activity. This paper focuses on the mechanism for the abnormal changes of the GL values based on the sequences of acoustic emission for three types of rock samples containing macro-asperity fracture; compressional en-echelon fracture and model-III shear fracture. The results show that for the three types of rock samples, there are continuous abnormal changes of GL value (>1) just before the non-elastic deformation occurs or during the process of nucleation prior to the instability. Based on the experimental results, it seems that the process of creep sliding and resistance-uniformization along fault zone is the possible mechanism for the abnormal changes of GL value before rock fractures.
文摘This paper investigates the equilibrium of fractional derivative and 2nd derivative, which occurs if the original function is damped (damping of a power-law viscoelastic solid with viscosities η of 0 ≤ η ≤ 1), where the fractional derivative corresponds to a force applied to the solid (e.g. an impact force), and the second derivative corresponds to acceleration of the solid’s centre of mass, and therefore to the inertial force. Consequently, the equilibrium satisfies the principle of the force equilibrium. Further-more, the paper provides a new definition of under- and overdamping that is not exclusively disjunctive, i.e. not either under- or over-damped as in a linear Voigt model, but rather exhibits damping phases co-existing consecutively as time progresses, separated not by critical damping, but rather by a transition phase. The three damping phases of a power-law viscoelastic solid—underdamping, transition and overdamping—are characterized by: underdamping—centre of mass oscillation about zero line;transition—centre of mass reciprocation without crossing the zero line;overdamping—power decay. The innovation of this new definition is critical for designing non-linear visco-elastic power-law dampers and fine-tuning the ratio of under- and overdamping, considering that three phases—underdamping, transition, and overdamping—co-exist consecutively if 0 < η < 0.401;two phases—transition and overdamping—co-exist consecutively if 0.401 < η < 0.578;and one phase— overdamping—exists exclusively if 0.578 < η < 1.
文摘In this study, an attempt is made to determine the interaction effect of two closely spaced strip footings using Pasternak model. The study considers small strain problem and has been performed using linear as well as nonlinear elastic analysis to determine the interaction effect of two nearby strip footings. The hyperbolic stress-strain relationship has been considered for the nonlinear elastic analysis. The linear elastic analysis has been carried out by deriving the equations for the interference effect of the footings in the framework of Pasternak model equation; whereas, the nonlinear elastic analysis has been performed using the finite difference method to solve the second order nonlinear differential equation evolved from Pasternak model with proper boundary conditions. Results obtained from the linear and the nonlinear elastic analysis are presented in terms of non-dimensional interaction factors by varying different parameters like width of the foundation, load on the foundation and the depth of the rigid base. Results are suitably compared with the existing values in the literature.
基金supported by the General Secretariat of Research and Technology(GSRT)of Greece(Helenic/ERC-13(88257-IL-GradMech-ASM)ARISTEIA II(5152-SEDEMP)THALES/INTERMONU68/1117)
文摘A brief account is provided on crack-tip solutions that have recently been published in the literature by employing the so-called GRADELA model and its variants. The GRADELA model is a simple gradient elasticity theory involving one internal length in addition to the two Lame＇ constants, in an effort to eliminate elastic singularities and discontinuities and to interpret elastic size effects. The non-singular strains and non-singular （but sometimes singular or even hypersingular） stresses derived this way under different boundary conditions differ from each other and their physical meaning in not clear. This is discussed which focus on the form and physical meaning of non-singular solutions for crack-tip stresses and strains that are possible to obtain within the GRADELA model and its extensions.
文摘A Fourier-Chebyshev spectral method is proposed in this paper for solving the cavitation problem in nonlinear elasticity. The interpolation error for the cavitation solution is analyzed, the elastic energy error estimate for the discrete cavitation solution is obtained, and the convergence of the method is proved. An algorithm combined a gradient type method with a damped quasi-Newton method is applied to solve the discretized nonlinear equilibrium equations. Numerical experiments show that the Fourier-Chebyshev spectral method is efficient and capable of producing accurate numerical cavitation solutions.
