基于WinForm窗体的光谱扫描系统设计

目前,国内市场上广泛使用的紫外–可见分光光度计、紫外–荧光分光光度计大部分不具备自动波长扫描功能,只能人工操作和读数,因此使用受到了极大的限制。本文设计了一款基于Visual C#WinForm窗体的光谱仪软件,通过串口接收紫外–可见分光光度计、紫外–荧光分光光度计等光谱仪器的检测数据,并在电脑端对数据进行处理后,可以自动计算出吸光度、透光率、荧光强度等光谱参数,直观地显示波长扫描光谱图。

Non-agricultural Population, Employment and Land:An Econometric Study in an Integrated Framework

Abstract： his paper explored the relationships among nonagricultural population, employment and land in an integrated framework, taking account of rural-urban land conversion into Carlino-Mills＇s model on the regional growth. Two-stage-leastsquares and ordinary-least-squares were employed. Recent data for district （grade） cities in China （from 1999 to 2005） were used. Our results showed that： first, urban population influenced non-agricultural employment, and vice versa, but the evidence that non-agricultural employment influenced urban population was stronger than the evidence that urban population influenced non-agricultural employment; second, urban population and non-agricultural employment both influenced ruralurban land conversion, but the evidence that urban population influenced rural urban land conversion was more stronger than the evidence that non-agricultural employment did. We also found that： first, the employment from the secondary industry influenced urban population in a positive way, and vice versa, but the employment from the tertiary industry influenced urban population in a negative way, and vice versa; second, the employment from the secondary industry influenced rural-urban land conversion in a positive way, but the employment from the tertiary industry influenced rural-urban land conversion in a negative way. We can conclude that the key of urbanization is to speed up the process of non-agricultural employment, especially the employment from the tertiary industry, which might promote non-agricultural population, employment and land harmoniously.

Relationship between Farmland Use Right Circulation and Non-agricultural Employment——Based on Survey Data from Eastern and Western China

Relationship between Chinese rural non-agricultural employment and farmland use circulation has always been a hot research topic without final conclusions.This paper uses survey data of"China Health and Retirement Longitudinal Study(CHARLS)"covering 1,549 households of 95 villages in Zhejiang and Gansu Province in 2008.According to the data analysis,Zhejiang Province has a higher ratio of rural households leasing out their farmland than Gansu Province has,while the latter has a higher ratio of rural residents going out for earning a living.In both provinces,non-agricultural employment and farmland use circulation show significant positive correlation,but in Gansu,non-agricultural employment of farmers shows no significant positive correlation with rural households leasing out their farmland.The factor shows that for peasants in underdeveloped regions of west China,they rely more on land because of its social security functions,so they are not willing to lease out their land even when they go to cities for earning a living.For local government,it is not appropriate to promote farmland use circulation by depending on the transfer of rural labor forces,fundamental needs of peasants must be taken into consideration.

Spatial Pattern of Female Non-agricultural Employment and Its Driving Forces in Guangdong Province,China:A Perspective of Individual and Family-level

Promoting women’s employment is not only the need of social and economic development,but also the historical mission of liberating women.This paper uses data from the 1%Population Sample Survey,taken in Guangdong Province in 2015,to explore how women’s marital status,education,and family environment affect the female non-agricultural employment rate(FNAER)on a county scale using a spatial-lag model.The results show that:1)The female non-agricultural employment rate in counties of Guangdong Province is low,with more than three-quarters of counties having female non-agricultural employment rate less than 50%.Moreover,the spatial distribution of FNAER is uneven,with the high-value areas concentrated in the southeast and the low-value areas mainly distributed in the central and western parts of Guangdong Province.2)From the perspective of industry,there are significant spatial differences among women.In the southeast,women are mainly engaged in the secondary industry,while in the central and western regions,women are mainly engaged in the tertiary industry.3)Women having better skills and more effective support from the elderly can improve the FNAER.Women having lower skills,smaller-scale families,a higher fertility rate,and households with two or more elderly members have a negative effect on the FNAER.4)Public policies suggest that improving women’s education and their family environment,building social welfare facilities,and repairing the family environment will increase the FNAER.

The Impacts of Income from Non-agricultural Industries Operated by Rural households on Farmers' Income

Income from non-agricultural industries operated by rural households is an important income source of farmers' income. According to the Regional Rural Residents' Net Income Per Capita in 2004 issued by the State Statistics Bureau and the relevant statistics of national comprehensive investigation(CGSS2005) in 2005, the impacts of farmers' income gap and farmers' individual features on their income and the impacts of income from non-agricultural industries operated by rural households on farmers' individual income differences are analyzed by applying Hierarchical Linear Models (HLM) as an analysis tool to establish the null model of HLM, excluding the second level model of the second level prediction variables and including the second level model of the second layer prediction variables. The analysis assumes that farmers' individual income varies hugely in different provinces; farmers' individual income has close relation with farmers' individual features; the improvement of income from non-agricultural industries operated by rural households has different impacts on farmers' income.

A review of non-agricultural land-use in peri-urbanization area:research progress and perspectives

The peri-urbanization area as a kind of rural-urban interface is changing rapidly ,physical, economlc and social terms. The land use pattern in such area is shifting away from the assumptions of mainstream paradigms to new conceptual landscapes, which leads to a series of problems on economic development and social stabilization. There are many researches on non-agricultural land-use in peri-urbanization area. In this paper both international and domestic research literature is reviewed by dividing six parts. The first part introduces the conception of peri-ur-banization area and its driver factors. Then in the second and the third part, the paper expatiates on the progress in the non-agricultural land-use in peri-urban area on land-use problems in the research area, while the fifth part reviews the integrating ways of non-agricultrual land-use. Finally, recommendations for further study are draw with specific reference to the current and future position of non-agricultural land-use study in peri-urban area.

Projecting Wintertime Newly Formed Arctic Sea Ice through Weighting CMIP6 Model Performance and Independence

Precipitous Arctic sea-ice decline and the corresponding increase in Arctic open-water areas in summer months give more space for sea-ice growth in the subsequent cold seasons. Compared to the decline of the entire Arctic multiyear sea ice,changes in newly formed sea ice indicate more thermodynamic and dynamic information on Arctic atmosphere–ocean–ice interaction and northern mid–high latitude atmospheric teleconnections. Here, we use a large multimodel ensemble from phase 6 of the Coupled Model Intercomparison Project(CMIP6) to investigate future changes in wintertime newly formed Arctic sea ice. The commonly used model-democracy approach that gives equal weight to each model essentially assumes that all models are independent and equally plausible, which contradicts with the fact that there are large interdependencies in the ensemble and discrepancies in models' performances in reproducing observations. Therefore, instead of using the arithmetic mean of well-performing models or all available models for projections like in previous studies, we employ a newly developed model weighting scheme that weights all models in the ensemble with consideration of their performance and independence to provide more reliable projections. Model democracy leads to evident bias and large intermodel spread in CMIP6 projections of newly formed Arctic sea ice. However, we show that both the bias and the intermodel spread can be effectively reduced by the weighting scheme. Projections from the weighted models indicate that wintertime newly formed Arctic sea ice is likely to increase dramatically until the middle of this century regardless of the emissions scenario.Thereafter, it may decrease(or remain stable) if the Arctic warming crosses a threshold(or is extensively constrained).

Importance and Countermeasures of Curbing the Conversion of Agricultural Land to Non-agricultural Land under the Background of the Rural Revitalization Strategy

Farmland is the most basic element for farmers’survival and development,and has a social security function.The conversion of agricultural land to non-agricultural land has gradually become the primary factor in the reduction of agricultural land in various regions of China,seriously endangering China’s food security.Under the background of the rural revitalization strategy,the emergence of the conversion of agricultural land to non-agricultural land and the inevitability of its development were analyzed from both the acceleration of urbanization and the increase in land demand by using the literature research method.The importance of curbing the conversion of agricultural land to non-agricultural land to achieve the grand goal of strong agriculture,beautiful rural areas,and rich farmers was clarified,and then countermeasures and suggestions to curb the conversion of agricultural land to non-agricultural land were put forward,which is of great significance to promoting the effective implementation of China’s rural revitalization strategy.

Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review

Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the workpiece.This technology has a very broad application prospect in industrial manufactur-ing.Researchers have conducted extensive research on the ultrasonic vibration plastic forming of metals and laid a deep foundation for the development of this field.In this review,metals were classified according to their crystal structures.The effects of ultrasonic vibration on the microstructure of face-centered cubic,body-centered cubic,and hexagonal close-packed metals during plastic forming and the mech-anism underlying ultrasonic vibration forming were reviewed.The main challenges and future research direction of the ultrasonic vibra-tion plastic forming of metals were also discussed.

ELLIPTIC EQUATIONS IN DIVERGENCE FORM WITH DISCONTINUOUS COEFFICIENTS IN DOMAINS WITH CORNERS

We study equations in divergence form with piecewise Cαcoefficients.The domains contain corners and the discontinuity surfaces are attached to the edges of the corners.We obtain piecewise C^(1,α) estimates across the discontinuity surfaces and provide an example to illustrate the issue regarding the regularity at the corners.

Representation of an Integer by a Quadratic Form through the Cornacchia Algorithm

Cornachia’s algorithm can be adapted to the case of the equation x2+dy2=nand even to the case of ax2+bxy+cy2=n. For the sake of completeness, we have given modalities without proofs (the proof in the case of the equation x2+y2=n). Starting from a quadratic form with two variables f(x,y)=ax2+bxy+cy2and n an integer. We have shown that a primitive positive solution (u,v)of the equation f(x,y)=nis admissible if it is obtained in the following way: we take α modulo n such that f(α,1)≡0modn, u is the first of the remainders of Euclid’s algorithm associated with n and α that is less than 4cn/| D |) (possibly α itself) and the equation f(x,y)=n. has an integer solution u in y. At the end of our work, it also appears that the Cornacchia algorithm is good for the form n=ax2+bxy+cy2if all the primitive positive integer solutions of the equation f(x,y)=nare admissible, i.e. computable by the algorithmic process.

Assessment of the Drafting Quality of Request Forms Submitted to the Malaria and Parasitology Units at the Institut Pasteur de Cote d’Ivoire

Biological tests provide information on the medical analysis requested by both the patient and the prescriber. It is a communication link between the prescriber and the laboratory staff. The lack of some information on request forms not only affects the drafting quality of the test and patient care, but could also make thousands of data produced by healthcare centers unusable. The aim of this study was to assess the drafting quality of request forms submitted to the Malaria and Parasitology Units at the Institut Pasteur de Côte d’Ivoire. Methods: It was a descriptive cross-sectional study to assess the drafting quality of request forms of various prescribers received at the Institut Pasteur de Côte d’Ivoire. This study was conducted at the Malaria and Parasitology Units, department of Parasitology and Mycology (Institut Pasteur de Côte d’Ivoire), from 6th December 2020 to 6th December 2021. The information on each request forms was recorded on a data collection form designed for this purpose. Each data collection form corresponds to a request forms and each test to a patient. Results: Out of a total of 1990 request forms received, the patient’s age and sex were missing on 18% and 26.8% of the tests respectively. More than half (51.80%) of request forms did not indicate the patient’s place of residence. Clinical information was not provided on 45.90% of the tests. Prescribers omitting their signatures were 51%, stamps were 50.3% and contacts were 71.2%. Only 5.4% of request forms were of good drafting quality. Providing all the required information on the forms could facilitate the use and analysis of data and samples.

Study on Effectiveness of Solitary-Wave-Like Form Based on Overtopping Data from Irregular Wave Tests

The previous study conducted by Li(2022)demonstrates that the Goda graph can be adequately represented by a solitary-wave-like form across the entire range of relative water depth,with the exception of the extremely shallow zone.However,it remains uncertain whether this form is equally effective when applied to test data generated by irregular waves,as the Goda graph was initially developed based on overtopping data from regular wave tests.Additionally,it is unclear whether this form is suitable for formulating overtopping discharge at composite vertical walls.In order to address these questions,a 2D overtopping experiment was conducted,incorporating both simple and composite types of vertical walls,with various relative water depths across the entire range,excluding the extremely shallow zone.A novel analysis procedure was developed,which proved to be highly productive and can be considered a general method for data fitting.Ultimately,the study yielded two conclusions:(1)the solitary-wave-like form is remarkably effective in formulating overtopping test data generated by irregular waves,regardless of whether the vertical wall is simple or composite,and(2)the resulting formulas exhibit definitely better performance compared with existing formulas.

Bioaccumulation,subcellular distribution and chemical forms of cadmium in Aster subulatus Michx.

【Objective】Through analyzing the bioaccumulation capacity,subcellular distribution and chemical forms of cadmium(Cd)in Aster subulatus Michx.,this study was to provide reference for revealing the Cd tolerance mechanism of A.subulatus Michx.【Method】After cultured for 24 d under the action of Hoagland nutrient solution and gradient Cd concentrations(0,30,60 and 90 mg/L),A.subulatus Michx.were harvested,and its leaf,stem and root were treated by differential centrifugation,chemical reagent extraction,and digested with graphite digester,respectively,then the Cd content in the root,stem and leaf were determined by atomic absorption spectroscopy.【Result】The experimental results indicated that the bioaccumulation capacity of Cd in A.subulatus Michx.was root>stem>leaf,and the maximum Cd concentration in the root,stem and leaf of A.subulatus Michx.were 130.74,78.69 and 56.62 mg/kg(fresh matter),respectively.Most of Cd stored in the cell wall and the soluble fractions of the root and leaf of A.subulatus Michx.,with only a smaller portion Cd in organelle fraction.Analysis result of subcellular Cd content showed that 52.27%-58.61%of Cd for root was mainly stored in the soluble fraction,but 42.10%-63.28%of Cd for leaf was mainly stored in the cell wall fraction.The concentration of pectates and protein integrated-Cd was higher in the root and leaf compared to other chemical forms Cd.Pectates and protein integrated-Cd was the main chemical forms Cd in the root and leaf of A.subulatus Michx.,and their percentages were 68.91%-74.80%and 57.38%-83.80%,respectively.Cd treatment could significantly increase the proportion of water-soluble organic acid Cd from 13.64%to 22.72%in root and undissolved phosphate Cd from 10.02%to 32.78%in leaf with increasing Cd concentration in the culture medium.【Conclusion】The root,stem and leaf of A.subulatus Michx.has strong bioaccumulation capacity to Cd,Cd is primarily stored in the soluble fractions of the root and cell wall fractions of the leaf,and less toxic pectates and protein integrated-Cd is the main chemical forms Cd in the root and leaf of A.subulatus Michx.,this might be the main mechanism of Cd tolerance in A.subulatus Michx.

Familial Forms of Spondyloarthritis Study of 100 Senegalese Multiplex Families

Introduction: Spondyloarthritis (SpA) comprises a group of chronic inflammatory rheumatic diseases characterized by predominant axial involvement. These include ankylosing spondylitis (AS), reactive arthritis (ReA), psoriatic arthritis (PsA), arthritis associated with inflammatory bowel diseases (IBD), SAPHO syndrome (Synovitis, Acne, Pustulosis, Hyperostosis, and Osteitis), juvenile spondyloarthritis (JSPA), and undifferentiated SpA. Their exact cause is unknown but is believed to stem from a combination of factors. The first familial forms were described by de Blécourt et al. in 1961. The objective was to evaluate the epidemiological, clinical, therapeutic and evolutionary aspects of familial forms of SpA and in particular, to prove the severity of the disease in family members compared to index cases in the rheumatology department of the Aristide Le Dantec University Hospital in Dakar. Methodology: This was a prospective, cross-sectional and descriptive study with an analytical aim on patients with the familial form of spondyloarthritis defined by the existence of at least one other family member with SpA outside the propositus, collected within the Aristide Le Dantec rheumatology department in Dakar over a period of 10 years between January 2012 and December 2021. There were two phases of study, the first of which consisted of collecting index cases with miserly SpA and the second of which consisted of family screening after consent. The data analysed were epidemiological, clinical, paraclinical, therapeutic and evolving. Results: Out of 100 families of 1905 members, 667 SpA patients included, i.e. a prevalence of 35%, including 225 (33.73%) men and 412 women (61.17%), i.e. a ratio of 1.8. The mean age at diagnosis among relatives was 26.3 years (range 13 and 80 years), 47.14 years among the propositus, in whom the mean age at onset was 36.26 years and that of relatives 49.9 years in the first degree, 15 years in the second degree and 1 year in the third degree. The time to diagnosis was 11.20 years in the first degree, 2.5 years in the second degree, 1 year in the third degree and 10.88 years in the case of the proposes. The number of marriages in families was 420 of which 116 were consanguineous (consanguinity rate 27.62%), 19% among the propositus. HLA-B27 positive in 92% of the proposers and 33.43% in the families;70% of the propositus had an inflammatory syndrome and 17.54% in the families;87% of sacroilliitis in the propositus and 5.54% in the families. Clinical forms were dominated by undifferentiated SpA (338 cases) and APS (295 cases). The average BASFI was 3.23 on D0;2.59 in the 3rd month and 1 in the 6th month for the propositus versus 2.55 at D0;1.86 at the 3rd month and 1.55 in the 6th month in the families. Average BASDAI was 3.92 at D0;3.12 at the 3rd month and 2.07 at the 6th month in the propositus and 3 at D0;2.21 at the 3rd month and 1 at the 6th month in the families. Autoimmune associated conditions were 18 cases, degenerative 24 cases, autoinflammatory 2 metabolic cases 18 cases. They all received: NSAIDs, methotrexate, salazopyrine (11 cases) and anti-TNF-α (1 case). The evolution was generally favourable. Conclusion: SpA is on the rise in Senegalese hospitals, frequent in young people, SPA and undifferentiated SpA are the most frequent, management is essentially based on conventional care, and the disease is less severe in family members than index cases.

MPI/OpenMP-Based Parallel Solver for Imprint Forming Simulation

In this research,we present the pure open multi-processing(OpenMP),pure message passing interface(MPI),and hybrid MPI/OpenMP parallel solvers within the dynamic explicit central difference algorithm for the coining process to address the challenge of capturing fine relief features of approximately 50 microns.Achieving such precision demands the utilization of at least 7 million tetrahedron elements,surpassing the capabilities of traditional serial programs previously developed.To mitigate data races when calculating internal forces,intermediate arrays are introduced within the OpenMP directive.This helps ensure proper synchronization and avoid conflicts during parallel execution.Additionally,in the MPI implementation,the coins are partitioned into the desired number of regions.This division allows for efficient distribution of computational tasks across multiple processes.Numerical simulation examples are conducted to compare the three solvers with serial programs,evaluating correctness,acceleration ratio,and parallel efficiency.The results reveal a relative error of approximately 0.3%in forming force among the parallel and serial solvers,while the predicted insufficient material zones align with experimental observations.Additionally,speedup ratio and parallel efficiency are assessed for the coining process simulation.The pureMPI parallel solver achieves a maximum acceleration of 9.5 on a single computer(utilizing 12 cores)and the hybrid solver exhibits a speedup ratio of 136 in a cluster(using 6 compute nodes and 12 cores per compute node),showing the strong scalability of the hybrid MPI/OpenMP programming model.This approach effectively meets the simulation requirements for commemorative coins with intricate relief patterns.

Schur Forms and Normal-Nilpotent Decompositions

Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,such as the triple decomposition of motion(TDM)and normal-nilpotent decomposition(NND),have been proposed to analyze the local motions of fluid elements.However,due to the existence of different types and non-uniqueness of Schur forms,as well as various possible definitions of NNDs,confusion has spread widely and is harming the research.This work aims to clean up this confusion.To this end,the complex and real Schur forms are derived constructively from the very basics,with special consideration for their non-uniqueness.Conditions of uniqueness are proposed.After a general discussion of normality and nilpotency,a complex NND and several real NNDs as well as normal-nonnormal decompositions are constructed,with a brief comparison of complex and real decompositions.Based on that,several confusing points are clarified,such as the distinction between NND and TDM,and the intrinsic gap between complex and real NNDs.Besides,the author proposes to extend the real block Schur form and its corresponding NNDs for the complex eigenvalue case to the real eigenvalue case.But their justification is left to further investigations.

Deformation mechanisms and microstructural characteristics of AZ61 magnesium alloys processed by a continuous expansion extrusion approach

The unique continuous extrusion-based severe plastic deformation approaches were proposed recently to process high-performance magnesium (Mg) alloys,while the in-depth deformation mechanisms under such complicated thermomechanical conditions were not well understood In the present work,the fundamental deformation behaviors of AZ61 Mg alloy from 25 to 400°C were firstly examined under uniaxial compression deformation.Then the deformation mechanisms and microstructural characteristics of AZ61 Mg alloy during continuous expansion extrusion forming (CEEF) were systematically investigated by microstructural observations,finite element and cellular automata simulations The results showed that the continuous evolutions of temperature,larger strain level and complex stress state with strain rate range of 0~5.98 s-1during CEEF brought the distinctive dynamic recrystallization behaviors and texture development in AZ61 Mg alloy,which were different to that of uniaxial compression deformation.In details,a remarkable grain refinement was achieved via CEEF processing due to the simultaneous actions of continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX).Gradually enhanced CDRX were observed from center to edge region,which had significant effects on the texture distribution and texture strength.The c-axis of most grains rotated under distinctive shear strain following parabolic metal flow,resulting in stable fiber texture.In addition,the evolution of the internal texture of the alloy led to an obvious increase in the Schmid factor for the activation of basal(c+a)slip system.©2022 Chongqing University.Publishing services provided by Elsevier B.V.on behalf of Ke Ai Communications Co.Ltd.

Comparison between Two Different Manufactured Forms of β-Tricalcium Phosphate Bone Graft in Immediate Implant Placement

Objectives: The aim of this study was to compare the efficacy of using the synthetic β-TCP bone grafting material in two different manufacturing forms (putty and granular) in grafting the jumping zone around immediate implant. Patients and Method: A randomized controlled clinical and radiographic trial was conducted on 24 male patients aged from 45 - 55 with badly decayed non-restorable teeth in the posterior mandibular area and seeking for receiving immediate dental implant directly after extraction. Vertical bone height and bone density were taken at time of implant placement and 6 months postoperatively. Results: The Putty form group and the Granular form group did not differ statistically in terms of age, post-operative complications, or implant outcome six months postoperatively. Additionally, there was a statistically significant increase in Putty form group compared to the Granular form group regarding Marginal bone loss 6 months postoperatively, but there was no statistically significant difference between the Putty form group and the Granular form group regarding Bone density by CBCT. Conclusion: The β-TCP Putty material, compared to β-TCP granular, displayed better surgical handling properties, and both forms had no adverse effect on bone formation, bone tissue maturation or graft volume stability, The β-TCP granular material, compared to β-TCP putty, displayed less marginal bone loss 6 months post-operatively.

Evaluation of Laboratory Request Forms Completion in a Tertiary Medical Laboratory of the Democratic Republic of Congo

Background: The inadequacy in the completeness of the Laboratory Request Form (LRF) has been reported as one of the major sources of errors during the pre-analytical step of laboratory analysis. To prevent the occurrence of such errors, this study aimed at assessing the level of completeness of LRFs. Methods: A retrospective analysis of laboratory request forms was conducted at the Clinical Biology Laboratory of the Kinshasa University Clinic, DR Congo, between November 2021 to May 2022. The LRFs were evaluated according to the completeness of all sections including administrative data of the patient, data of physician who ordered the test, relevant patient’s clinical data and data of the biological sample. Results: From a total of 2842 LRFs evaluated, none was fully completed with all required information. Particularly, patient’s clinical data including the medical history, provisional diagnosis and current treatment, were the most absent in 99% LRFs. However, two sections related to patient’s ID and prescribed test were informed in 100% LRFs. Conclusion: The results of this preanalytical audit can serve as an improvement opportunity focused on strengthening awareness about complete filling of LRF.