Research on Teaching Methods of Flight Control Principles

With the rapid development of China’s civil aviation industry,the teaching method of operating knowledge of flight principles has changed greatly,which creates a good implementation environment to improve the safety of civil aviation in our country.At present,the main training content of air route transport pilots in China is basic aviation theory,initial flight training,airline modification,etc.The principles of flight control are an important part of basic aviation theoretical knowledge training,which will involve a large number of flight technology training content,instructors will also be based on the pilot type.Teaching flight control theory and practical knowledge requires relatively high theoretical learning ability of students,and the learning effect of this part of theoretical knowledge will directly affect the quality of subsequent learning,but also directly affect the effectiveness of flight training.This paper focuses on the analysis of the basic concepts of flight control,studies the existing problems in the teaching of flight control principles,summarizes the teaching measures of flight control principles,aiming to provide a reference to teaching personnel.

A feedback control method for phase signal demodulation in fber-optic hydrophones

In the realm of acoustic signal detection,the identification of weak signals,particularly in the presence of negative signal-to-noise ratios,poses a significant challenge.This challenge is further heightened when signals are acquired through fiber-optic hydrophones,as these signals often lack physical significance and resist clear systematic modeling.Conventional processing methods,e.g.,low-pass filter(LPF),require a thorough understanding of the effective signal bandwidth for noise reduction,and may introduce undesirable time lags.This paper introduces an innovative feedback control method with dual Kalman filters for the demodulation of phase signals with noises in fiber-optic hydrophones.A mathematical model of the closed-loop system is established to guide the design of the feedback control,aiming to achieve a balance with the input phase signal.The dual Kalman filters are instrumental in mitigating the effects of signal noise,observation noise,and control execution noise,thereby enabling precise estimation for the input phase signals.The effectiveness of this feedback control method is demonstrated through examples,showcasing the restoration of low-noise signals,negative signal-to-noise ratio signals,and multi-frequency signals.This research contributes to the technical advancement of high-performance devices,including fiber-optic hydrophones and phase-locked amplifiers.

Research trends in methods for controlling macro-micro motion platforms

With ongoing economic,scientific,and technological developments,the electronic devices used in daily lives are developing toward precision and miniaturization,and so the demand for high-precision manufacturing machinery is expanding.The most important piece of equipment in modern high-precision manufacturing is the macro-micro motion platform(M3P),which offers high speed,precision,and efficiency and has macro-micro motion coupling characteristics due to its mechanical design and composition of its driving components.Therefore,the design of the control system is crucial for the overall precision of the platform;conventional proportional–integral–derivative control cannot meet the system requirements,and so M3Ps are the subject of a growing range of modern control strategies.This paper begins by describing the development history of M3Ps,followed by their platform structure and motion control system components,and then in-depth assessments of the macro,micro,and macro-micro control systems.In addition to examining the advantages and disadvantages of current macro-micro motion control,recent technological breakthroughs are noted.Finally,based on existing problems,future directions for M3P control systems are given,and the present conclusions offer guidelines for future work on M3Ps.

Electronic Brake-Force Distribution Control Methods of ABS-Equipped Vehicles During Cornering Braking

Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.

Dynamic modelling and chaos control for a thin plate oscillator using Bubnov–Galerkin integral method

The utilization of thin plate systems based on acoustic vibration holds significant importance in micro-nano manipulation and the exploration of nonlinear science. This paper focuses on the analysis of an actual thin plate system driven by acoustic wave signals. By combining the mechanical analysis of thin plate microelements with the Bubnov–Galerkin integral method, the governing equation for the forced vibration of a square thin plate is derived. Notably,the reaction force of the thin plate vibration system is defined as f=α|w|, resembling Hooke’s law. The energy function and energy level curve of the system are also analyzed. Subsequently, the amplitude–frequency response function of the thin plate oscillator is solved using the harmonic balance method. Through numerical simulations, the amplitude–frequency curves are analyzed for different vibration modes under the influence of various parameters. Furthermore, the paper demonstrates the occurrence of conservative chaotic motions in the thin plate oscillator using theoretical and numerical methods. Dynamics maps illustrating the system’s states are presented to reveal the evolution laws of the system. By exploring the effects of force fields and system energy, the underlying mechanism of chaos is interpreted. Additionally, the phenomenon of chaos in the oscillator can be controlled through the method of velocity and displacement states feedback, which holds significance for engineering applications.

Controllable Modulation of Morphology and Property of CsPbCl_(3)Perovskite Microcrystals by Vapor Deposition Method

As a direct wide bandgap semiconductor,CsPbCl_(3)has great potential applications in the eld of near-ultraviolet photodetectors,lasers and higher-order multiphoton uores-cent detectors.In this work,we synthesized CsPbCl_(3)micro/nanocrystals by vapor depo-sition method with CsCl and PbCl_(2)powders as the source materials.It was con rmed that the formation of CsPbCl_(3)perovskite through the chemical reaction of CsCl with PbCl_(2)occurred in the quartz boat before the source evaporation,not in vapor or on sub-strate surface.The evaporated CsPbCl_(3)can form micro/nanocrystals on substrate surfaces under appropriate conditions.Various morphologies including irregular polyhedrons,rods and pyramids could be observed at lower temperature,while stable and uniform CsPbCl_(3)single crystal microplatelets were controllably synthesized at 450℃.Prolonging the growth time could modulate the size and density of the microcrystals,but could not change the morphology.Substrate types made little di erence to the morphology of CsPbCl_(3)crystals.The photoluminescence spectra indicated that the crystallinity and morphology of CsPbCl_(3)micro/nanocrystals have signi cant e ects on their optical properties.The work is expected to be helpful to the development of optoelectronic devices based on individual CsPbCl_(3)microcrystal.

Proximal Methods for Elliptic Optimal Control Problems with Sparsity Cost Functional

First-order proximal methods that solve linear and bilinear elliptic optimal control problems with a sparsity cost functional are discussed. In particular, fast convergence of these methods is proved. For benchmarking purposes, inexact proximal schemes are compared to an inexact semismooth Newton method. Results of numerical experiments are presented to demonstrate the computational effectiveness of proximal schemes applied to infinite-dimensional elliptic optimal control problems and to validate the theoretical estimates.

IMPLICIT ITERATIVE METHODS WITH VARIABLE CONTROL PARAMETERS FOR ILL-POSED OPERATOR EQUATIONS

This paper discusses a kind of implicit iterative methods with some variable parameters, which are called control parameters, for solving ill-posed operator equations. The theoretical results show that the new methods always lead to optimal convergence rates and have some other important features, especially the methods can be implemented parallelly.

Error Control Strategies for Numerical Integrations in Fast Collocation Methods

We propose two error control techniques for numerical integrations in fast multiscale collocation methods for solving Fredholm integral equations of the second kind with weakly singular kernels. Both techniques utilize quadratures for singular integrals using graded points. One has a polynomial order of accuracy if the integrand has a polynomial order of smoothness except at the singular point and the other has exponential order of accuracy if the integrand has an infinite order of smoothness except at the singular point. We estimate the order of convergence and computational complexity of the corresponding approximate solutions of the equation. We prove that the second technique preserves the order of convergence and computational complexity of the original collocation method. Numerical experiments are presented to illustrate the theoretical estimates.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

STATE SPACE METHODS FOR DECENTRALIZED H_∞ CONTROL

ＳＴＡＴＥＳＰＡＣＥＭＥＴＨＯＤＳＦＯＲＤＥＣＥＮＴＲＡＬＩＺＥＤＨ＿∞ＣＯＮＴＲＯＬＳＴＡＴＥＳＰＡＣＥＭＥＴＨＯＤＳＦＯＲＤＥＣＥＮＴＲＡＬＩＺＥＤＨ＿∞ＣＯＮＴＲＯＬ￥ＷｕＭｉｎ；ＧｕｔＷｅｉｈｕａ；ＣｈｅｎＮｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡ...

A new optimal adaptive backstepping control approach for nonlinear systems under deception attacks via reinforcement learning

In this paper,a new optimal adaptive backstepping control approach for nonlinear systems under deception attacks via reinforcement learning is presented in this paper.The existence of nonlinear terms in the studied system makes it very difficult to design the optimal controller using traditional methods.To achieve optimal control,RL algorithm based on critic–actor architecture is considered for the nonlinear system.Due to the significant security risks of network transmission,the system is vulnerable to deception attacks,which can make all the system state unavailable.By using the attacked states to design coordinate transformation,the harm brought by unknown deception attacks has been overcome.The presented control strategy can ensure that all signals in the closed-loop system are semi-globally ultimately bounded.Finally,the simulation experiment is shown to prove the effectiveness of the strategy.

Modified Fletcher-Reeves and Dai-Yuan Conjugate Gradient Methods for Solving Optimal Control Problem of Monodomain Model

In this paper, we present the numerical solution for the optimal control problem of monodomain modelwith Rogers-modified FitzHugh-Nagumo ion kinetic. The monodomain model, which is a well-known mathematical model for simulation of cardiac electrical activity, appears as the constraint in our problem. Our control objective is to dampen the excitation wavefront of the transmembrane potential in the observation domain using optimal applied current. Various conjugate gradient methods have been applied by researchers for solving this type of optimal control problem. For the present paper, we adopt the modified Fletcher-Reeves method and modified Dai-Yuan methodfor computing the optimal applied current. Numerical results show that the excitation wavefront is successfully dampened out by the optimal applied current when the modified Fletcher-Reeves method is used. However, this is not the case when the modified Dai-Yuan method is employed. Numerical results indicate that the modified Dai-Yuan method failed to converge to the optimal solution when the Armijo line search is used.

Introduction of Several Methods to Control Fusarium Head Blight (FHB)

Fusarium head blight (FHB) is a worldwide destructive disease of wheat in the warm, semi-humid or humid regions, especially serious in China. The disease not only causes significant losses in yield and reduces grain quanlity, but also induces toxin to contaminated seeds, which is harmful to the healthy of human and livestocks, So it is important to control it. There are several methods to control Fusarium head blight (FHB). Such as using Crop rotation, Soil cultivation and Fertiliser, biological control, Fungicides control, transgenes, resistance to control Fusarium head blight (FHB). All of these methods gain some effect, but also exist their deficiency. Sometimes crop rotation had no significant effect on DON contamination of wheat grain, subsequent reductions in DON contamination were inconsistent when using Soil cultivation and Fertiliser, Unfortunately, under field conditions, the biological control achieved has been shown to be variable and in some tests has failed to give any control, The use of fungicides, however, have not been consistently effective in controlling FHB and in reducing DON formation, transgene-silencing at different generations is a problem to use transgenes, Information on location of QTL for FHB resistance should improve dramatically in the near future on resistance to control Fusarium head blight (FHB). Therefore, it is pressing to improve control methods, especially to DON.

Some Equivalence Transform Methods for Simulating Models in Control Systems

In this paper two classes of equivalence transform methods for solving ordinary differential equations are proposed. One class of method is the equivalence integral transform method for special differential algebraic problems. The advantage of this class of method is such that the amount of work calculating one integration with parameters becomes that of two interpolations, when the system of nonlinear equations is solved on the right hand side function. The other class of method is the equivalence substitution method for avoiding calculating derivative on the right hand side function. In order to avoid calculation derivatives, two equivalence substitution methods are proposed here. The application instances of some special effect of the equivalence substitution methods are given.

Iterative Solution Methods for a Class of State and Control Constrained Optimal Control Problems

Iterative methods for solving discrete optimal control problems are constructed and investigated. These discrete problems arise when approximating by finite difference method or by finite element method the optimal control problems which contain a linear elliptic boundary value problem as a state equation, control in the righthand side of the equation or in the boundary conditions, and point-wise constraints for both state and control functions. The convergence of the constructed iterative methods is proved, the implementation problems are discussed, and the numerical comparison of the methods is executed.

Prevention and Control Effects of New Biological Formulations Sprayed by Different Methods on Proceras venosatus (Walker) and Tryporyza intacta Snellen in Middle and Late Stages

To screen new biological formulations, accurate and efficient application technology, field test was conducted with 72% Bacillus thuringiensis(Bt)·monosultap WP, 8% lambda-cyhalothrin·emamectin benzoate SA and 3.6% lambda-cyhalothrin·Bt SA through manual spraying and unmanned aerial vehicle spraying. Test results and comprehensive evaluation analysis demonstrated that 72% Bt·monosultap WP and 8%lambda-cyhalothrin·emamectin benzoate SA by manual spraying and unmanned aerial vehicle spraying had good prevention and control effect on strains and internodes damaged by Tryporyza intacta Snellen in middle and late stage, which were ideal new biological formulations with high effi-ciency and low risk for prevention and control of T. intacta in middle and late stage, and could be popularized in sugarcane area. 72% Bt·monosultap WP at the dose of 3 000 g/hectare and 8% lambda-cyhalothrin·emamectin benzoate SA at the dose of 750 mL/hectare could be sprayed in mid September at the peak occurrence period of the forth and fifth generations of T. intacta and Proceras venosatus. Agents were diluted with 900 kg water per hectare, and manually sprayed with electric knapsack sprayer; or agents were diluted with 15 kg of Haoyang aerial control special addi-tives and water per hectare, and sprayed with unmanned aerial vehicle. The control effect against borer-damaged strain rate was above 81.3% and that against borer-damaged internode rate was above 88.6%.

Analytical Methods in Quality Control of Scientific Publications

Plagiarism, fake or even falsified presentation has become a major plague for scientific publications. This paper is a response to personal appeal by David JW Lane the Editor-in-Chief of Research and Reports in Biodiversity Studies to support and promote the international author standards as developed by COPE for authors and editors-in-chief posted to me April 3rd 2012 (International standards for editors and authors http://www.dovepress.com/rrbscope.t9699812). As corresponding author for more than 100 scientific papers, dozens of scientific reviews, several chapters in scientific books, and author and editor of a book Historical Overview of Chromatography and Related Techniques in Analysis of Antimalarial Drug Primaquine, and as a reviewer of Journal of Chromatography, Journal of Chromatography A, Journal of Chromatography B: Biomedical Sciences and Applications, Lipids, Journal of General Microbiology, Journal of Clinical Microbiology, Journal of Microbiological Methods, Oral Microbiology and Immunology, Analytica Chimica Acta, Mycological Research and Journal of Pharmaceutical and Biomedical Analysis, and member of editorial board of Electronic Components and Systems, American Journal of Analytical Chemistry, ISRN Chromatography and Open Journal of Clinical Diagnostics I was adhered to a new ethical and moral standards in scientific publications. The presented paper is an example of use the analytical methods in visualizing of plagiarism and falsification in the published scientific literature. It is obvious that some of scientific publications need careful quality control. Some papers should have been rejected but were not. These papers clearly pollute the field of scientific information. It is not always easy to demonstrate inappropriate presentation even when many supporting facts are available. The facts should be obvious;there should be no hesitation about the quality or value of a paper presented for consideration to be published. Plagiarism is most common and harmful phenomenon in scientific publications. The plagiarism is based on an original discovery or reproduction of the results from the other authors. The analytical methods used in the quality control of the data can disclose plagiarism. An example is the publication under scrutiny “Applications of GC-EI-MS for the Identification of Positional Isomer in Primaquine, an Antimalarial Drug” by Dongre et al. (2005) Journal of Pharmaceutical and Biomedical Analysis 39, No. 1-2, 111-116.

Weighing and Prioritizing Noise Control Methods Using the Delphi Technique and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) in an Iranian Tire Manufacturing Factory

Undoubtedly,noise has become a major hazardous issue in today’s industrial world,with a lot of people suffering from exposure to excessive noise in their work environments.This study was conducted to weigh and prioritize noise control methods in an Iranian tire manufacturing complex in Iran.The Delphi method and the Technique for Order Preference by Similarity and an Ideal Solution(TOPSIS)were utilized for this purpose.This cross-sectional,descriptive study was conducted in the baking hall of an Iranian tire manufacturing factory in 2016.To weigh and prioritize noise control methods,Analytic Hierarchy Process(AHP)and TOPSIS were applied.In total,4 criteria and 8 alternatives were examined.An AHP and TOPSIS questionnaire was then designed to prioritize noise control methods in the light of the objectives,criteria,and alternatives.Then,the collected data were fed into Expert Choise.V.11 and Excel and data analysis was carried out using TOPSIS.The results of data analysis indicated that the inconsistency rate in all the cases was smaller than 10%,hence the consistency of the responses was verified.According to the TOPSIS results and experts’opinions about the criteria,implementation and maintenance cost(with a weight of 0.481)and method effectiveness and efficiency(with a weight of 0.046)had the highest and lowest priority respectively.Based on the weights TOPSIS,the appropriate methods for controlling noise in tire manufacturing are designing and manufacturing silencer,requiring people in charge to quickly fix the leaks and change baking press washers on time.

Toxicology,biosynthesis,bio-control of aflatoxin and new methods of detection

Mycotoxins and their derivatives since their discoveries and until the present time are behind unspecified economic and medical damages.Aflatoxins are classified according to their physical–chemical and toxicological characters in the most dangerous row of the mycotoxins.These aflatoxins are in part responsible,of irreversible medical disasters that are not easily manageable such as cancer of the liver and kidneys,and in the other part,of losses in the stored cereal products.Based on these crucial findings,monitoring of this toxin became imperative in post-harvest food products,during storage,during transformation chain and even during the long phases of conservation.Vigilance of this toxin is delivered by detection methods using very advanced technologies to respond in the shortest possible times.In addition,the knowledge of factors supporting the biosynthesis of aflatoxins such as the temperature,moisture content,concentration of nitrogen and carbon,and the molecules responsible for the genetic control of the synthesis will be reflected later in the choice of bio-control techniques.This control is currently based on new strategies using the bioactives substances of the plants,the lactic bacteria and some strains of actinomycetes that have good inhibiting activity against aflatoxins with fewer side effects on Man.On the other hand,this brief review summarizes the results of new studies demonstrating the toxicity of the toxin,new detection methods and bio-control.