Acoustic Non-Destructive Testing Technology in Concrete Bridge Inspection and Pile Foundation Detection

This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.

Research Progress of Atrial Fibrillation Detection Technology

Atrial fibrillation (AF) is the most common chronic arrhythmia in clinical practice, which can cause high disability and mortality with the progress of the disease. Many studies at home and abroad have shown that the incidence of atrial fibrillation gradually increases with age. Clinically, the onset of most AF patients is insidious, which is difficult to capture by routine electrocardiogram, and there is some difficulty in the diagnosis. In order to make the early diagnosis of atrial fibrillation more efficient and accurate, this paper reviews the current status and research progress of detection technology for atrial fibrillation at home and abroad, in order to provide a scientific basis for the early diagnosis of atrial fibrillation.

Analysis of Detection and Monitoring Technology in the Construction and Maintenance of Large Bridges

Currently,there is significant attention placed on the construction,management,and maintenance of large service bridges.Within the realm of bridge maintenance management,the utilization of detection and monitoring technology is indispensable.By employing these technologies,we can effectively identify any structural defects within the bridge,promptly uncover unknown risks,proactively establish maintenance strategies,and prevent the rapid deterioration of bridge conditions.This article aims to explore the advantages of applying bridge monitoring and testing technology and to discuss various methods for implementing detection and monitoring technology throughout the construction,management,and maintenance phases of large bridges.Ultimately,this will contribute to ensuring the safe operation of large bridges.

Optical techniques in non-destructive detection of wheat quality:A review

Wheat quality detection is essential to ensure the safety ofwheat circulation and storage.The traditional wheat quality detection methods mainly include artificial sensory evaluation and physicochemical index analysis,which are difficult to meet the requirements for high accuracy and efficiency in modern wheat quality detection due to the disadvantages of subjectivity,destruction of sample integrity and low efficiency.With the rapid development of optical technology,various optical-based methods,using near-infrared spectroscopy technology,hyperspectral imaging technology and terahertz,etc.,have been proposed for wheat quality detection.These methods have the characteristics of nondestructiveness and high efficiency which make them popular in wheat quality detection in recent years.In this paper,various state-of-the-art optical-based techniques of wheat quality detection are analyzed and summarized in detail.Firstly,the principle and process of common optical non-destructive detection methods for wheat quality are introduced.Then,the optical techniques used in these detection methods are divided into seven categories,and the comparison of these technologies and their advantages and disadvantages are further discussed.It shows that terahertz technology is regarded as the most promising wheat quality detection method compared with other optical detection technologies,because it can not only detect most types of wheat deterioration,but also has higher accuracy and efficiency.Finally,the research of optical technology in wheat quality detection is prospected.The future research of optical technology-based wheat quality detection mainly includes the construction of wheat quality optical detection standardization database,the fusion of multiple optical detection technologies and multiple quality index information,the improvement of the anti-interference of optical technology and the industrialization of optical inspection technology for wheat quality.These studies are of great significance to improve the detection technology of wheat and ensure the storage safety of wheat in the future.

Evaluation of cathode quality and damage of aluminium electrolytic cell based on non-destructive technology

To evaluate the quality and damage condition of the electrolyzer,wave velocity detection technology and impact echo technology were used to detect the cathode part of the electrolyzer.The experimental results show that wave velocity is linearly related to the porosity,and there is also a linear relationship between wave velocity and the square root of reciprocal density in cathode carbon blocks(CCBs)before installation into electrolyzer.Combined with detection results of wave velocity and voltage drop,the large-size CCBs with relatively good quality can be found.Through the impact echo technology on cathode steel rods(CSRs),the results of the on-site detection show that the damage condition of CSRs can be effectively evaluated,and the damage location of CSRs can be determined.This study proposes a novel and quantifiable method for the evaluation of cathode quality and damage,which provides a reference for prolonging the service life of the electrolyzer.

Plant Nutrient Solution Detection System Based on ZigBee Wireless Technology

Based on the limitations of traditional plant nutrient solution detection, a ZigBee plant nutrient solution detection system based on CC2530 was developed. This system uses CC2530 as the main control chip, DS18B20 as the temperature sensor for temperature acquisition, PH electrode sensor for PH value acquisition. The experiment shows that this wireless control system equipped with temperature and pH detection sensor collects and samples the main nutrient solution parameters through the main controller, performs wireless communication transmission and terminal communication, and realizes the intelligent detection of plant nutrient solution parameters. This technique of applying wireless sensor network technology to plant factories greatly improves the reliability and stability of the nutrient monitoring system.

Optical generation,detection and non-destructive testing applications of terahertz waves

Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.

The analysis of application of data mining technology in the system of intrusion detection

With the economic development and the popularity of application of electronic computer, electronic commerce has rapid development. More and more commerce and key business has been carried on the lnternet because Internet has the features of interaction, openness, sharing and so on. However, during the daily commerce, people worry about the security of the network system. So a new technology which can detect the unusual behavior in time has been invented in order to protect the security of network system. The system of intrusion detection needs a lot of new technology to protect the data of the network system. The application of data mining technology in the system of intrusion detection can provide a better assistant to the users to analyze the data and improve the accuracy of the checking system.

Research on Obstacle Detection Method of Urban Rail Transit Based on Multisensor Technology

With the rapid development of urban rail transit,passenger traffic is increasing,and obstacle violations are more frequent,and the safety of train operation under high-density traffic conditions is becoming more and more thought provoking.In order to monitor the train operating environment in real time,this paper first adopts multisensing technology based on machine vision and lidar,which is used to collect video images and ranging data of the track area in real time,and then it performs image preprocessing and division of regions of interest on the collected video.Then,the obstacles in the region of interest are detected to obtain the geometric characteristics and position information of the obstacles.Finally,according to the danger degree of obstacles,determine the degree of impact on the train operation,and use the signal system automatic response ormanual response mode to transmit the detection results to the corresponding train,so as to control the train operation.Through simulation analysis and experimental verification,the detection accuracy and control performance of the detection method are confirmed,which provides safety guarantee for the train operation.

Intrusion Detection System with Remote Signalling for Vehicles Using an Arduino Controller and Radio-Frequency Technology

Malicious activities or policy violations have been a concern for the past years. For example, many people have been victims of robbery on vehicles. A conceptual diagram of an Intrusion Detection System (IDS) [1] [2] for vehicles with remote signaling using an Arduino controller and radio-frequency technology is proposed in this paper. To address malicious activities on vehicles, two aspects are considered here, namely: notifier and detector. Firstly, an object-oriented C module that puts on and off a controller (installed inside the vehicle) and an anti-theft electronic editing that powered using an alternator and supported by a back-up battery are implemented. Secondly, a magnetic intrusion sensor, controlled by a proximity detector using radio-frequency technology, has been installed on each vehicle door. To enable IDS, a user needs to activate the monitoring system when leaving their vehicle. This is done using a remote system. In case the user does not activate the monitoring system while leaving the vehicle, a 5-meter-proximity detector will automatically lock the system and set off the monitoring system whenever the user is outside the detection zone. The detection zone is a 5-meter radius area centered at the controller. Here, monitoring consists of geolocating any intruders within the detection zone. This means, if any of the vehicle doors is opened while the system is still locked, the controller will activate the vehicle alarm for a few seconds, thereafter send an SMS notification to the owner. The system automatically unlocks as soon as the proximity detector is within the detection zone. The contribution of this paper, as compared to other similar work, is to reinforce the electronic implementation of IDS.

Present Situation and Detection Technology of Pesticide Residues in Tobacco

This article summarizes the present situation of pesticide residue in tobacco, and introduces the extraction methods and detection tech-niques of pesticide residues commonly used in pesticide residue analysis. The advantages and disadvantages of these methods are reviewed, and the development of pesticide residue analysis technology is prospected.

Signal Processing Circuit Design of Infrared Detection System with SO2 Concentration Based on Correlation Filter Technology

Signals from infrared detector are very weak in SO2 concentration measuring system.In order to improve the sensitivity of detection,combining with filter correlation technology and infrared absorption principle,the weak signal processing circuit is designed according to correlation detection technology.Under laboratory conditions,system performance of SO2 concentration is tested,and the experimental data are analyzed and processed.Then relationship of SO2 concentration and the measuring voltage is provided to prove that the design improves measuring sensitivity of the system.

Research on Key Technology of Web Vulnerability Detection System Based on Cloud Environment

In the light of the defect of web vulnerability detection system, combined with the characteristics of high efficient and sharing in the cloud environment, a design proposal is presented based on cloud environment, which analyses the key technology of gaining the URL, task allocation and scheduling and the design of attack detection. Experiment shows its feasibility and effectiveness in this paper.

Analysis on Mathematics Teaching Goal Design Technology and Its Detection

Teaching goal design is an important link of teaching design, which has the teaching, learning and measurement function. How to establish the appropriate teaching goal and properly state to enhance its guidance and detection function are the important tasks of teaching design. This paper makes a programming and systematic analysis on the aspects of teaching goal design theory, teaching goal statement mode and technology, teaching goal statement and design and teaching goal design detection.

Research on engineering-oriented constraints conflict detection in collaborative design of wire harness technology

Engineering-oriented constraint of harness technology has much information and project information presents progressive changes along with the design. Therefore, how to handle conflict resolution quickly is a problem to be solved. Process model of con- flict detection is put forward according to characteristics of harness technology design engineering-oriented constraint, and then two problems of how to conduct conflict positioning and judgment of constraint rules are introduced in this paper. Afterwards in this pa- per, constraint information directed acyclic graph is established by classified project constraint information to solve the conflict posi- tioning problem; solution of constraint satisfaction problem is applied to realize judgment problem of constraint rules. Finally, exam- ple is used to analyze the method in this paper to further verify the correctness and effectiveness of this method.

Discussion on the Status Quo of Non-Destructive Testing Technology in Highway Engineering and Strategies of Improving the Quality of Testing

Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.

Multi-Energy Gamma-Ray Attenuations for Non-Destructive Detection of Hazardous Materials

We present a non-destructive method (NDM) to identify minute quantities of high atomic number (Z) elements in containers such as passenger baggage, goods carrying transport trucks, and environmental samples. This method relies on the fact that photon attenuation varies with its energy and properties of the absorbing medium. Low-energy gamma-ray intensity loss is sensitive to the atomic number of the absorbing medium, while that of higher-energies vary with the density of the medium. To verify the usefulness of this feature for NDM, we carried out simultaneous measurements of intensities of multiple gamma rays of energies 81 to 1408 keV emitted by sources 133Ba (half-life = 10.55 y) and 152Eu (half-life = 13.52 y). By this arrangement, we could detect minute quantities of lead and copper in a bulk medium from energy dependent gamma-ray attenuations. It seems that this method will offer a reliable, low-cost, low-maintenance alternative to X-ray or accelerator-based techniques for the NDM of high-Z materials such as mercury, lead, uranium, and transuranic elements etc.

Applications of Ultrasonic Detection Technology in Bridge Concrete Pile Foundation Detection

In this paper,the application strategy of ultrasonic detection technology in the detection of concrete foundation piles is analyzed using a construction project as an example.It includes a basic overview of the project,an overview of ultrasonic testing technology in bridge concrete pile foundation testing,and an analysis of its practical application in the concrete pile foundation testing of this project.The objective of this analysis is to provide some reference for the application of ultrasonic testing technology and the improvement of the quality of bridge concrete pile foundation testing.

Research on Infrared Image Fusion Technology Based on Road Crack Detection

This study aimed to propose road crack detection method based on infrared image fusion technology.By analyzing the characteristics of road crack images,this method uses a variety of infrared image fusion methods to process different types of images.The use of this method allows the detection of road cracks,which not only reduces the professional requirements for inspectors,but also improves the accuracy of road crack detection.Based on infrared image processing technology,on the basis of in-depth analysis of infrared image features,a road crack detection method is proposed,which can accurately identify the road crack location,direction,length,and other characteristic information.Experiments showed that this method has a good effect,and can meet the requirement of road crack detection.