期刊文献+
共找到1,008篇文章
< 1 2 51 >
每页显示 20 50 100
基于响应分组的仲裁器PUF偏置控制方法
1
作者 刘海龙 严清虎 何佳洛 《现代电子技术》 北大核心 2024年第9期104-108,共5页
针对在现场可编程门阵列(FPGA)平台上实现的仲裁器物理不可克隆函数(PUF)响应唯一性和稳定性较差的问题,提出一种基于响应分组的仲裁器PUF偏置控制方法。在基于可编程延时线(PDL)的仲裁器PUF电路中插入多路选择器(MUX)粗调开关单元和PD... 针对在现场可编程门阵列(FPGA)平台上实现的仲裁器物理不可克隆函数(PUF)响应唯一性和稳定性较差的问题,提出一种基于响应分组的仲裁器PUF偏置控制方法。在基于可编程延时线(PDL)的仲裁器PUF电路中插入多路选择器(MUX)粗调开关单元和PDL微调开关单元,使路径延时可受调节激励控制。通过实时改变调节激励,控制每个响应分组中有效响应的汉明重量达到50%可提高响应唯一性;通过偏置控制筛选出延时差异较大的响应可提高响应稳定性。在Xilinx XC7Z020 FPGA器件上实现带偏置控制功能的64级仲裁器PUF电路,仅消耗143个查找表(LUT)和425个触发器(DFF)资源。在温度为-20~80℃、供电电压0.9~1.1 V范围内,该仲裁器PUF响应唯一性为49.89%,有效响应稳定性可达到100%。 展开更多
关键词 仲裁器物理不可克隆函数 现场可编程门阵列 偏置控制 响应分组 可编程延时线 调节激励
下载PDF
炭素制品在石墨化过程中的“Puffing”
2
作者 张松威 张云峰 《炭素技术》 CAS CSCD 2008年第6期48-49,58,共3页
炭素制品在石墨化过程中时常会出现导致大量裂纹废品的"Puffing"现象,严重影响了产品的质量,本文旨在探讨引起"Puffing"现象的因素、产生机理以及介绍几种在石墨制品生产过程中已经被广泛采用的抑制、减少该现象产... 炭素制品在石墨化过程中时常会出现导致大量裂纹废品的"Puffing"现象,严重影响了产品的质量,本文旨在探讨引起"Puffing"现象的因素、产生机理以及介绍几种在石墨制品生产过程中已经被广泛采用的抑制、减少该现象产生的有效措施,以提高石墨制品的质量及成品率指标。 展开更多
关键词 炭素制品 石墨化 puffing
下载PDF
基于PUF技术的物联网应用技术方案
3
作者 杨光 廖浩祥 《广东通信技术》 2024年第9期47-51,共5页
分析了物联网应用的各种安全问题,针对仿冒终端接入业务平台的安全风险,设计了一种基于PUF安全技术的IPv6地址的生成和验证方法,实现了平台对终端/卡进行身份认证的安全方案并定义了详细的交互流程,有助于业务平台防范非法接入攻击、保... 分析了物联网应用的各种安全问题,针对仿冒终端接入业务平台的安全风险,设计了一种基于PUF安全技术的IPv6地址的生成和验证方法,实现了平台对终端/卡进行身份认证的安全方案并定义了详细的交互流程,有助于业务平台防范非法接入攻击、保障平台和业务数据的安全。 展开更多
关键词 puf IPV6 DHC Pv6 密钥协商 安全 身份认证
下载PDF
Temperature Simulation of Berry Slices Under Microwave Vacuum Puffing Conditions 被引量:1
4
作者 Liu Hai-jun Lin Zhen +3 位作者 Zheng Xian-zhe Liu Cheng-hai Song Xiang-yu Liu Dai-ya 《Journal of Northeast Agricultural University(English Edition)》 CAS 2012年第4期75-78,共4页
In order to study the temperature simulation of berry slices in microwave vacuum puffing process, numerical simulation method was used to simulate the temperature in different time according to theoretical calculation... In order to study the temperature simulation of berry slices in microwave vacuum puffing process, numerical simulation method was used to simulate the temperature in different time according to theoretical calculation result and the deviation had been verificated throughout the experiment. The better uniform of temperature between experiment and simulation could be concluded except in the period of rapid temperature increase. The temperature reached the high point of 130.25℃ in the middle point of slices at 100 s, while the temperature was over 50℃ in external parts of slices for the reason of thermal diffusion. Conclusions could be drawn that the model was effective and numerical analysis could simulate the temperature simulation for berry leather in microwave vacuum puffing process. 展开更多
关键词 microwave vacuum puffing SIMULATION TEMPERATURE RASPBERRY
下载PDF
Analysis of the Gas Puffing Performance for Improving the Repeatability of Ohmic Discharges in the SUNIST Spherical Tokamak 被引量:1
5
作者 谢会乔 谭熠 +2 位作者 柯锐 王文浩 高喆 《Plasma Science and Technology》 SCIE EI CAS CSCD 2014年第8期732-737,共6页
The gas puffing performance plays a key role in repeatable discharges in the Sino- UNited Spherical Tokamak (SUNIST) experiments. In this paper, temporal evolution of the gas pressure in the vacuum vessel and the de... The gas puffing performance plays a key role in repeatable discharges in the Sino- UNited Spherical Tokamak (SUNIST) experiments. In this paper, temporal evolution of the gas pressure in the vacuum vessel and the dependence of the repeatability of plasma discharges on different timing arrangements between the gas puffing pulse and the Ohmic field have been experimentally investigated. The results show that, after a fast rising phase, the gas pressure becomes quasi-stationary. In the regime of the discharges being started up when the gas pressure has already reached the quasi-stationary state for about 37 ms, an improved repeatability of the plasma discharges is achieved. 展开更多
关键词 gas puffing performance repeatability of plasma discharges SUNIST
下载PDF
The Effect of Atmospheric Oxygen on the Puffing and Bursting Phenomena during Vegetable Oils Droplets Vaporization Process for Their Use as Biofuel in Diesel Engine 被引量:1
6
作者 A. S. Zongo T. Daho +6 位作者 G. Vaitilingom B. Piriou J. Valette C. Caillol B. G. Segda P. Higelin J. Koulidiati 《Energy and Power Engineering》 2018年第12期518-533,共16页
The past literature on the use of vegetable oils as fuel in diesel engine revealed that utilizing vegetable oil fuels in diesel engines may require property changes in the oil or perhaps, some minor engine modificatio... The past literature on the use of vegetable oils as fuel in diesel engine revealed that utilizing vegetable oil fuels in diesel engines may require property changes in the oil or perhaps, some minor engine modifications or operating changes. This study was conducted to search for the effect of atmospheric oxygen on the puffing and bursting phenomena that occur during vegetable oils droplet vaporization process in their use as fuel in diesel engine. The fiber-suspended droplet technique was used, and the normalized square droplet diameter as well as the temperature evolution vicinity the droplet was analyzed. The results show that puffing and bursting phenomena highly depend on oxygen. In presence of atmospheric oxygen, there is an increase of the puffing and bursting intensity and therefore the evaporation rate of the vegetable oil droplets, but in an inert environment or when the environment is oxygen-depleted puffing and bursting phenomena disappearing and make place of a series of explosions with lower magnitude. The lack of oxygen reduces the thermal degradation, polymerization and oxidation reactions and consequently the vaporization rate of vegetable oils droplets;and could therefore lead to the formation of deposits in the form of polymers. This is unsuitable for their use as a fuel in diesel engines. It can also be concluded that atmospheric oxygen has some positive effects on engine performance and emissions when operating with vegetable oil. These results help to address the challenge for the use of alternative fuels such as non-edible vegetable oils. 展开更多
关键词 puffing BURSTING Oxygen Nitrogen LINSEED Oil VAPORIZATION Engine Energy
下载PDF
OEDGE modeling of plasma contamination efficiency of Ar puffing from different divertor locations in EAST
7
作者 张鹏飞 张凌 +14 位作者 吴振伟 许棕 高伟 王亮 杨清泉 许吉禅 刘建斌 屈浩 刘永 黄娟 吴成瑞 侯玉梅 金钊 J D ELDER 郭后扬 《Plasma Science and Technology》 SCIE EI CAS CSCD 2018年第4期121-126,共6页
Modeling with OEDGE was carried out to assess the initial and long-term plasma contamination efficiency of Ar puffing from different divertor locations, i.e. the inner divertor, the outer divertor and the dome, in the... Modeling with OEDGE was carried out to assess the initial and long-term plasma contamination efficiency of Ar puffing from different divertor locations, i.e. the inner divertor, the outer divertor and the dome, in the EAST superconducting tokamak for typical ohmic plasma conditions. It was found that the initial Ar contamination efficiency is dependent on the local plasma conditions at the different gas puff locations. However, it quickly approaches a similar steady state value for Ar recycling efficiency >0.9. OEDGE modeling shows that the final equilibrium Ar contamination efficiency is significantly lower for the more closed lower divertor than that for the upper divertor. 展开更多
关键词 DIVERTOR Ar puffing impurity transport OEDGE EAST
下载PDF
Analysis of Process of Microwave Puffing Blueberry Snacks
8
作者 Zheng Xian-zhe Chen Kai-di +4 位作者 Su Xiao-lin Liu Han Xu Hao Wang Xiao-rui Han Ling-yu 《Journal of Northeast Agricultural University(English Edition)》 CAS 2018年第1期62-69,共8页
In order to reveal the mechanism of microwave puffing berry snack, a center combination experiment method was employed to explore the puffing process of blueberry snacks. Blueberry as the raw material, the microwave p... In order to reveal the mechanism of microwave puffing berry snack, a center combination experiment method was employed to explore the puffing process of blueberry snacks. Blueberry as the raw material, the microwave power, initial moisture content, puffing time and mass were employed as experimental factors. The pressure, temperature, amount of water vapor and puffing properties in terms of the volume, hardness and brittleness were employed as target parameters. The higher microwave intensity and initial moisture content resulted in the more amount of water vapor in the snacks and more holes in the appropriate puffing time. The shape and structure of the snacks tended to be stable with the removal of moisture. 展开更多
关键词 BLUEBERRY MICROWAVE puffing SNACK PRESSURE
下载PDF
Divertor Experiments with MBI and Strong Gas Puffing on HL-2A
9
作者 段旭如 丁玄同 +18 位作者 杨青巍 严龙文 姚良骅 洪文玉 宣伟民 刘德权 陈燎原 宋显明 张锦华 曹曾 崔正英 李伟 刘仪 潘宇东 潘莉 郑银甲 周艳 毛维成 刘永 《Plasma Science and Technology》 SCIE EI CAS CSCD 2006年第1期19-23,共5页
In the HL-2A 2004 experiment campaign, pulsed molecular beam injection (MBI) and strong hydrogen gas puffing under the divertor configuration were used for gas fueling. The experimental results show that the MBI of ... In the HL-2A 2004 experiment campaign, pulsed molecular beam injection (MBI) and strong hydrogen gas puffing under the divertor configuration were used for gas fueling. The experimental results show that the MBI of hydrogen can reduce the heat flux to the divertor target plate. The electron temperature measured by the Langmuir probe array decreases significantly during the injection of the molecular beam whereas the electron density increases. This indicates that the plasma pressure near the target plates tends to be constant at a new equilibrium level. In the divertor plasmas with strong hydrogen gas puffing a high plasma density up to 4.4 × 10^19 m^-3 was achieved. In addition, a phenomenon similar to the partially detached divertor regime was observed, which is being studied in open divertor tokamaks such as DIII-D to reduce the peak heat flux on the target plates near the separatrix. After a strong gas puffing the electron temperature measured on the outer divertor target plate near the separatrix decreases till below 5 eV or even lower, but that of the farther outer divertor target plate does not change obviously; and the CIII and the Ha emissions at the plasma edge decrease as expected, but the Ha emission near the Xpoint increases. These results reflects some interesting characteristics, which needs to be studied by further modeling and experiments. 展开更多
关键词 DIVERTOR molecular beam injection gas puffing plasma
下载PDF
Simulation Study for Divertor Geometry and Gas Puffing to Handle Huge Exhaust Power in HL-2M with SOLPS5.0
10
作者 崔学武 潘宇东 +2 位作者 李佳鲜 张锦华 毛瑞 《Plasma Science and Technology》 SCIE EI CAS CSCD 2013年第6期489-492,共4页
One of the critical issues to be solved for HL-2M is the power exhaust.Divertor target plate geometry strongly influences the plasma profiles by controlling the neutral recycling pattern,which in turn has a strong eff... One of the critical issues to be solved for HL-2M is the power exhaust.Divertor target plate geometry strongly influences the plasma profiles by controlling the neutral recycling pattern,which in turn has a strong effect on the symmetry and stability of the divertor plasma and finally on the whole edge region.The numerical simulation SOLPS5.0 package is used to design and explore the divertor target plates for HL-2M.We start with the choice of a proper target plate geometry,which has a smaller incidence angle in the permissible space,and then discuss the method of gas puffing to reduce the heat flux density on the target and the effects of gas puffing on the divertor plasma performance. 展开更多
关键词 SOLPS5.0 numerical simulation gas puffing
下载PDF
面向物联网安全认证的RO PUF模型的研究
11
作者 张学军 曹瑞浒 +2 位作者 周寅峰 谷群远 梅年松 《电子设计工程》 2024年第2期56-60,共5页
物联网设备的普及与应用极大地改变了生活方式,设备之间的身份安全问题也是使用者关注的焦点。该文基于物联网独特的体系结构,详细分析各层次中安全认证技术的必要性和使用PUF技术对物联网设备进行身份认证的可行性。该文采用一种RO PU... 物联网设备的普及与应用极大地改变了生活方式,设备之间的身份安全问题也是使用者关注的焦点。该文基于物联网独特的体系结构,详细分析各层次中安全认证技术的必要性和使用PUF技术对物联网设备进行身份认证的可行性。该文采用一种RO PUF结构,该方案通过混阶模型提高响应位的稳定性,使用可重构结构能加激励响应对的个数,使用并行架构保证结果的独立与安全。该设计通过Xilinx的Spartan6系列XC6SLX16-2CSG324 FPGA开发板进行结果测试,其可靠性可达到99.69%。 展开更多
关键词 物联网 物联网安全 身份认证技术 RO puf
下载PDF
基于PUF的安全认证协议的对比分析
12
作者 张跃飞 袁征 乔雅馨 《北京电子科技学院学报》 2024年第3期82-94,共13页
随着数字化和互联网的普及,安全性和隐私保护成为了重要关注点。物理不可克隆函数(Physical Unclonable Function,PUF)作为一种基于硬件特性的安全机制,为身份认证提供了一种新的途径。本文综述了基于PUF的安全认证协议的种类和特点,将... 随着数字化和互联网的普及,安全性和隐私保护成为了重要关注点。物理不可克隆函数(Physical Unclonable Function,PUF)作为一种基于硬件特性的安全机制,为身份认证提供了一种新的途径。本文综述了基于PUF的安全认证协议的种类和特点,将其分为基于weak PUF和基于strong PUF两种方式,并在类型和性能等方面进行了对比分析。同时本文还对比了不同安全认证协议的安全性,揭示了它们各自面临的安全风险。最后,本文深入探讨了基于PUF的安全认证协议的应用前景,探究了其所面临的挑战与解决方案,同时描绘了未来发展的趋势和展望。 展开更多
关键词 puf 安全认证协议 安全机制 安全风险
下载PDF
Design of the Pumping Stations and the Gas Puffing Systems for the Superconducting Tokamak HT-7U
13
作者 辜学茂 王小明 +5 位作者 秦品建 杨道文 胡建生 罗南昌 李生发 李高云 《Plasma Science and Technology》 SCIE EI CAS CSCD 2000年第6期557-563,共7页
The design of the pumping stations and the gas injection systems for the inner Chamber and the cryostat on HT-7U superconducting tokamak is described in this paper.
关键词 Design of the Pumping Stations and the Gas puffing Systems for the Superconducting Tokamak HT-7U HT
下载PDF
PDA/GO/PUF聚氨酯泡沫的力学与隔热性能及其微观机理
14
作者 刘世盟 郭乃胜 +2 位作者 崔世超 褚召阳 赵近川 《材料导报》 EI CAS CSCD 北大核心 2024年第22期269-277,共9页
为研究聚多巴胺/氧化石墨烯/软质聚氨酯泡沫(PDA/GO/PUF)的力学与隔热性能,采用一种新工艺制备了PDA/GO/PUF,利用压缩实验和接触角测试对PDA/GO/PUF的物理力学性能进行了测试,利用红外热像仪和燃烧实验对PDA/GO/PUF的隔热性能进行了表征... 为研究聚多巴胺/氧化石墨烯/软质聚氨酯泡沫(PDA/GO/PUF)的力学与隔热性能,采用一种新工艺制备了PDA/GO/PUF,利用压缩实验和接触角测试对PDA/GO/PUF的物理力学性能进行了测试,利用红外热像仪和燃烧实验对PDA/GO/PUF的隔热性能进行了表征,并通过热重(TG)、扫描电子显微镜(SEM)和傅里叶红外光谱(FTIR)进行了微观机理解释。结果表明:在循环荷载作用下,PDA/GO/PUF复合材料未产生永久变形,且具有较小的能量损失系数、较大的最大应力、较平稳的压缩强度和杨氏模量,表现出优异的力学稳定性和抗疲劳性能;PDA/GO/PUF表面疏水性能相较于PUF有显著提升,接触角增大了13.83°;PDA/GO/PUF较PUF表现出更优异、更稳定的隔热效果,且在燃烧过程中没有出现熔滴现象;在GO/PUF泡沫表面自聚合形成的PDA纳米涂层具有优异的黏附性,能够将脱离GO/PUF的GO颗粒也吸附在PDA/GO/PUF表面;PDA/GO/PUF在燃烧过程中形成了致密的炭层,有效地隔绝了热量并降低了PDA/GO/PUF的热分解速率,与PUF相比,其T_(-50%)分解温度提升了240℃,残炭量提升了21.65%,显著增强了材料的热稳定性;PDA/GO/PUF分别在1420 cm^(-1)和1714 cm^(-1)处出现了属于PDA涂层的N-H弯曲振动特征峰和GO的C=O伸缩振动特征峰,进一步证实了PDA/GO/PUF的成功制备。 展开更多
关键词 聚多巴胺 PDA/GO/puf聚氨酯泡沫 力学性能 隔热性能 微观机理
下载PDF
嵌入式系统中的内生存储器PUF研究综述
15
作者 陈帅 蔡敏 +1 位作者 杨志勇 曾集丰 《集成电路与嵌入式系统》 2024年第9期7-16,共10页
物理不可克隆函数(Physical Unclonable Functions,PUF)可视为一种“芯片指纹”,具有轻量级、不可预测、难以克隆等特性,已经成为物联网硬件安全机制的重要组成部分。然而,传统PUF的实现需要在硬件层面增加FPGA或专用集成电路,会增加硬... 物理不可克隆函数(Physical Unclonable Functions,PUF)可视为一种“芯片指纹”,具有轻量级、不可预测、难以克隆等特性,已经成为物联网硬件安全机制的重要组成部分。然而,传统PUF的实现需要在硬件层面增加FPGA或专用集成电路,会增加硬件成本。对于数以亿计的现有物联网嵌入式设备,难以通过硬件改造来增加PUF安全属性。因此,从现有设备的硬件结构中挖掘固有PUF(Intrinsic PUF,IPUF)成为PUF研究与产业化的关键组成部分。本工作将对已有的IPUF,尤其是基于存储器的IPUF(Memroy based Intrinsic PUF,MIPUF)相关工作进行系统综述,并针对IPUF在现有系统中的可实现性及未来的发展方向进行讨论,以推动该技术的工程应用。 展开更多
关键词 puf SRAM DRAM FLASH
下载PDF
Effects of Fermented Puffed Feather Meal on Growth Performance,Serum Biochemical Indices,Meat Quality,and Intestinal Microbiota in Broilers
16
作者 Lin Yu Chen Zhihui +9 位作者 Wu Hongzhi Ji Fengjie Liu Yang Li Jianing Yu Xilong Dou Renkai Yuan Hua Yang Qinghui Li Zhongyu Xu Liangmei 《Journal of Northeast Agricultural University(English Edition)》 CAS 2024年第3期42-58,共17页
This study aimed to investigate the effects of fermented puffed feather meal(FPFM)on growth performance,serum biochemical indices,meat quality,and intestinal microbiota in Arbor Acres(AA)broilers.A single-factor desig... This study aimed to investigate the effects of fermented puffed feather meal(FPFM)on growth performance,serum biochemical indices,meat quality,and intestinal microbiota in Arbor Acres(AA)broilers.A single-factor design was adopted,and four treatments were administered with five replicates to 240 one-day-old AA broilers.The control group(group A)received a basal diet,while the experimental groups received a basal diet plus 33%(group B),67%(group C)and 100%(group D)FPFM,respectively.Compared with group A,(1)the average daily gain(ADG)in group C decreased(P<0.05),and the feed conversion ratio(FCR)in group D increased(P<0.05);(2)the level of serum urea nitrogen in treatment groups decreased(P<0.05),and the levels of triglyceride,high density lipoprotein,low density lipoprotein,cholesterol,and glucose contents in group D increased(P<0.05)at day 21;(3)the serum immunoglobulin M and immunoglobulin G in group B and the immunoglobulin A in group C increased(P<0.05)at day 21,and the serum immunoglobulin M and immunoglobulin G in group D decreased(P<0.05)at day 42;(4)the share force of breast muscle and thigh muscle in group D increased(P<0.05);(5)the villus height to crypt depth ratio in the jejunum of group B increased(P<0.05)at day 21,and the villus height in group C and D increased(P<0.05)at day 42;(6)the proteobacteria counts in the cecum digesta in treatment groups decreased(P<0.05)at day 21.The basal diet supplemented with 33%FPFM promoted protein metabolism,enhanced immunity and improved meat quality,promoted the digestion and absorption of nutrients,increased intestinal microbial diversity,and improved the content of beneficial bacteria without affecting the growth performance,it was possible to be used as a good substitute for fish meal. 展开更多
关键词 fermented puffed feather meal(FPFM) growth performance serum biochemical indices meat quality intestinal microbiota
下载PDF
基于PUF的无人机网络轻量级身份认证方案
17
作者 朱庆森 宋翔飞 何智旺 《软件导刊》 2024年第6期114-120,共7页
在许多应用场景中,无人机收集的数据具有敏感性和私密性,必须考虑其安全性和隐私性。为此,提出基于PUF的无人机身份认证与密钥协商方案。该方案可以通过一次会话生成两架无人机之间的会话密钥,以及每架无人机与地面站之间的会话密钥,实... 在许多应用场景中,无人机收集的数据具有敏感性和私密性,必须考虑其安全性和隐私性。为此,提出基于PUF的无人机身份认证与密钥协商方案。该方案可以通过一次会话生成两架无人机之间的会话密钥,以及每架无人机与地面站之间的会话密钥,实现了多项安全功能。与现有无人机认证协商方案的性能比较结果表明,该方案在计算开销方面减少了17%,在平均通信开销方面减少了12%。该方案适用于实时性强、计算资源不足的无人机互联网。 展开更多
关键词 无人机 puf 身份认证 密钥协商 安全性证明
下载PDF
基于Xilinx Virtex-7系列FPGA器件配置存储空间PUF可行性探索
18
作者 郭俊杰 王婧 谢达 《电子与封装》 2024年第9期71-79,共9页
在静态随机存取存储器(SRAM)型现场可编程门阵列(FPGA)电路中,当电源启动并进行初始化时,SRAM单元通常会经历一个全面复位的过程。复位过程会导致SRAM单元内部的电荷分布形成一种特有的模式。提出了一种新的方法,利用配置内存中尚未使... 在静态随机存取存储器(SRAM)型现场可编程门阵列(FPGA)电路中,当电源启动并进行初始化时,SRAM单元通常会经历一个全面复位的过程。复位过程会导致SRAM单元内部的电荷分布形成一种特有的模式。提出了一种新的方法,利用配置内存中尚未使用的部分来识别电路,对8个Xilinx Virtex-7 FPGA进行总计200 000次的测量,评估了这种方法在同一电路中的一致性和在不同电路之间的差异性,以及随温度变化时和随时间老化后的稳定性。研究结果显示,SRAM物理不可克隆函数(PUF)能够有效地区分不同的FPGA电路。 展开更多
关键词 SRAM puf FPGA 配置内存空间
下载PDF
基于PUF的TEE可信根生成方法研究 被引量:1
19
作者 刘国 焦玉雷 +1 位作者 陈弈 李晓玥 《哈尔滨师范大学自然科学学报》 CAS 2024年第1期61-67,共7页
随着信息技术的快速发展,可信执行环境(TEE)在保障系统安全方面发挥着越来越重要的作用.然而,传统的TEE可信根生成方法存在诸多安全隐患,如易被复制、易遭受攻击等.因此,研究一种安全、可靠的可信根生成方法具有重要意义.针对现有TEE可... 随着信息技术的快速发展,可信执行环境(TEE)在保障系统安全方面发挥着越来越重要的作用.然而,传统的TEE可信根生成方法存在诸多安全隐患,如易被复制、易遭受攻击等.因此,研究一种安全、可靠的可信根生成方法具有重要意义.针对现有TEE可信根生成方法的不足,提出了一种基于物理不可克隆函数(PUF)的TEE可信根生成方法.该方法利用PUF的唯一性和不可预测性,结合TEE的安全特性,生成具有唯一标识和高度安全性的可信根.为了验证所提方法的有效性,使用强PUF芯片和FPGA搭建了硬件验证平台,对所述方法进行了实验验证.实验结果表明,基于PUF的TEE可信根生成方法能够成功生成具有唯一性的可信根. 展开更多
关键词 物理不可克隆函数 可信执行环境 可信根生成 实时安全性 物理存储介质攻击防御
下载PDF
基于RS和BCH码的SRAM-PUF密钥提取方法及性能分析
20
作者 周昱 于宗光 《计算机工程》 CAS CSCD 北大核心 2024年第7期187-193,共7页
物理不可克隆函数(PUF)是芯片制造过程中随机偏差形成的唯一和不可复制的物理指纹,使用这个特征可以鉴别各个芯片,然而PUF芯片因环境变化会影响输出,导致在认证应用时可能失败。介绍了模糊提取器的密钥提取方法,通过在静态随机存取存储... 物理不可克隆函数(PUF)是芯片制造过程中随机偏差形成的唯一和不可复制的物理指纹,使用这个特征可以鉴别各个芯片,然而PUF芯片因环境变化会影响输出,导致在认证应用时可能失败。介绍了模糊提取器的密钥提取方法,通过在静态随机存取存储器(SRAM)-PUF芯片中加入里德-所罗门(RS)硬解码,在认证系统中加入BCH软解码模块,纠正PUF在一定范围内变化来确保通过认证,并对SRAM-PUF电路在三温下进行实验分析。实验结果表明,SRAM-PUF电路的PUF点分布有较好的均衡性,在常温时可靠性接近100%,在低温条件下可靠性范围为98.84%~100%,在高温条件下,可靠性范围为97.77%~99%,当RS码和BCH码设计的纠错能力大于PUF可靠性时能够通过认证。 展开更多
关键词 物理不可克隆函数 静态随机存取存储器 模糊提取器 里德-所罗门码 BCH码
下载PDF
上一页 1 2 51 下一页 到第
使用帮助 返回顶部