Effect of bubble morphology and behavior on power consumption in non-Newtonian fluids’aeration process

Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate of impeller, ventilation, rheological properties and bubble morphology in the reactor. In this perspective, through optimal computational fluid dynamics models and experiments, the relationship between power consumption, volumetric mass transfer rate(kLa) and initial bubble size(d0) was constructed to establish an efficient operation mode for the aeration process of non-Newtonian fluids. It was found that reducing the d0could significantly increase the oxygen mass transfer rate, resulting in an obvious decrease in the ventilation volume and impeller speed. When d0was regulated within 2-5 mm,an optimal kLa could be achieved, and 21% of power consumption could be saved, compared to the case of bubbles with a diameter of 10 mm.

Prediction and Output Estimation of Pattern Moving in Non-Newtonian Mechanical Systems Based on Probability Density Evolution

A prediction framework based on the evolution of pattern motion probability density is proposed for the output prediction and estimation problem of non-Newtonian mechanical systems,assuming that the system satisfies the generalized Lipschitz condition.As a complex nonlinear system primarily governed by statistical laws rather than Newtonian mechanics,the output of non-Newtonian mechanics systems is difficult to describe through deterministic variables such as state variables,which poses difficulties in predicting and estimating the system’s output.In this article,the temporal variation of the system is described by constructing pattern category variables,which are non-deterministic variables.Since pattern category variables have statistical attributes but not operational attributes,operational attributes are assigned to them by posterior probability density,and a method for analyzing their motion laws using probability density evolution is proposed.Furthermore,a data-driven form of pattern motion probabilistic density evolution prediction method is designed by combining pseudo partial derivative(PPD),achieving prediction of the probability density satisfying the system’s output uncertainty.Based on this,the final prediction estimation of the system’s output value is realized by minimum variance unbiased estimation.Finally,a corresponding PPD estimation algorithm is designed using an extended state observer(ESO)to estimate the parameters to be estimated in the proposed prediction method.The effectiveness of the parameter estimation algorithm and prediction method is demonstrated through theoretical analysis,and the accuracy of the algorithm is verified by two numerical simulation examples.

Unsteady Hydromagnetic Non-Newtonian Nanofluid Flow Past a Porous Stretching Sheet in the Presence of Variable Magnetic Field and Chemical Reaction

The aim of this study is to examine the unsteady hydromagnetic flow of non-Newtonian nanofluid past a stretching sheet in the presence of variable magnetic field and chemical reaction. The system of non-linear partial differential equations governing the flow was solved using finite difference numerical approximation method. The resulting numerical schemes were simulated in MATLAB software. Furthermore, the skin-friction coefficient, Sherwood number, and Nusselt number have been presented in tabular form and discussed. The findings demonstrated that increasing Reynolds number increases velocity profiles while increasing permeability parameter, suction parameter and angle of inclination for the applied magnetic field reduces the velocity profiles of the fluid flow. Temperature of the fluid increases as the angle of inclination, magnetic number, Reynolds number and Eckert number increase but decreases as Prandtl number increases. Induced magnetic field profiles decrease as magnetic Prandtl number and suction parameter increase. Concentration profiles decrease as the chemical reaction parameter and Schmidt number increase but increase as the Soret number increases. The study is significant because fluid flow and heat transfer mechanisms with the variable magnetic considerations play an important role in magnetohydrodynamic generator or dynamo and magnetohydrodynamic pumps, nuclear reactors, vehicle thermal control, heat exchangers, cancer therapy, wound treatment and hyperthermia.

Influence of Anisotropic Permeability and Soret Effect on the Convective Heat and Mass Transfer through a Porous Cavity Saturated by a Non-Newtonian Fluid

In this work, an analytical study is carried out on double-diffusive natural convection through a horizontal anisotropic porous layer saturated with a non-Newtonian fluid by using the Darcy model with the Boussinesq approximations. The horizontal walls of the system are subject to vertical uniform fluxes of heat and mass, whereas the vertical walls are assumed to be adiabatic and impermeable. The Soret effect is taken into consideration. Based on parallel flow approximation theory, the problem is solved in the limit of a thin layer and documented the effects of the physical parameters describing this investigation.

Molecular dynamics simulation of the flow mechanism of shear-thinning fluids in a microchannel

Shear-thinning fluids have been widely used in microfluidic systems,but their internal flow mechanism is still unclear.Therefore,in this paper,molecular dynamics simulations are used to study the laminar flow of shear-thinning fluid in a microchannel.We validated the feasibility of our simulation method by evaluating the mean square displacement and Reynolds number of the solution layers.The results show that the change rule of the fluid system's velocity profile and interaction energy can reflect the shear-thinning characteristics of the fluids.The velocity profile resembles a top-hat shape,intensifying as the fluid's power law index decreases.The interaction energy between the wall and the fluid decreases gradually with increasing velocity,and a high concentration of non-Newtonian fluid reaches a plateau sooner.Moreover,the velocity profile of the fluid is related to the molecule number density distribution and their values are inversely proportional.By analyzing the radial distribution function,we found that the hydrogen bonds between solute and water molecules weaken with the increase in velocity.This observation offers an explanation for the shear-thinning phenomenon of the non-Newtonian flow from a micro perspective.

Pressure transient characteristics of non-uniform conductivity fractured wells in viscoelasticity polymer flooding based on oil-water two-phase flow

Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil recovery.In contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective permeability.Meanwhile,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant breakage.In this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer flooding.The hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer solution.The combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir pressure.Compared with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore section.The field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and the far-wellbore section with low fracture conductivity.The novelty of this paper is the analysis of pressure performances caused by the fracture dynamics and polymer rheology,as well as an analysis method that derives formation and fracture parameters based on the pressure and its derivative curves.

AZ31镁合金板材准静态-动态冲击流体介质温热复合成形极限研究

基于Nakazima半球凸模胀形试验,对AZ31镁合金板材进行了成形极限试验,探究了AZ31镁合金板材在准静态-动态冲击流体温热复合成形下成形极限分布规律。结果表明,温度升高会提升AZ31镁合金板材的极限应变,对比准静态与复合成形两种方式下的极限应变发现, AZ31镁合金板材在准静态-动态复合成形下极限应变值更高,塑性成形性能得到改善。对两种成形方式下的断口形貌扫描进行分析,结果表明,准静态-动态复合成形的韧窝比准静态成形的韧窝多且深。对不同成形方式试样在室温、 100及200℃下进行了EBSD分析,发现在室温时,复合成形出现了少量{10-12}拉伸孪晶协调变形。在100℃时,复合成形引入细而薄的拉伸孪晶片层,切割细化晶粒,塑性较准静态成形得到提升。200℃下比准静态成形产生更多的再结晶晶粒是复合成形塑性提高的主要原因。

RANDOM ATTRACTOR FOR A TWO-DIMENSIONAL INCOMPRESSIBLE NON-NEWTONIAN FLUID WITH MULTIPLICATIVE NOISE

This article proves that the random dynamical system generated by a twodimensional incompressible non-Newtonian fluid with multiplicative noise has a global random attractor, which is a random compact set absorbing any bounded nonrandom subset of the phase space.

ON THE EXISTENCE OF LOCAL CLASSICAL SOLUTION FOR A CLASS OF ONE-DIMENSIONAL COMPRESSIBLE NON-NEWTONIAN FLUIDS

In this paper, the aim is to establish the local existence of classical solutions for a class of compressible non-Newtonian fluids with vacuum in one-dimensional bounded intervals, under the assumption that the data satisfies a natural compatibility condition. For the results, the initial density does not need to be bounded below away from zero.

UNIFORM ATTRACTOR FOR NONAUTONOMOUS INCOMPRESSIBLE NON-NEWTONIAN FLUID WITH A NEW CLASS OF EXTERNAL FORCES

This paper is joint with [27]. The authors prove in this article the existence and reveal its structure of uniform attractor for a two-dimensional nonautonomous incompressible non-Newtonian fluid with a new class of external forces.

Thermal Analysis of MHD Non-Newtonian Nanofluids over a Porous Media

In the present research,Tiwari and Das model are used for the impact of a magnetic field on non-Newtonian nanofluid flow in the presence of injection and suction.The PDEs are converted into ordinary differential equations(ODEs)using the similarity method.The obtained ordinary differential equations are solved numerically using shooting method along with RK-4.Part of the present study uses nanoparticles(NPs)like TiO_(2) andAl_(2)O_(3) and sodium carboxymethyl cellulose(CMC/water)is considered as a base fluid(BF).This study is conducted to find the influence of nanoparticles,Prandtl number,and magnetic field on velocity and temperature profile,however,the Nusselt number and coefficient of skin friction parameters are also presented in detail with the variation of nanoparticles and parameters.The obtained results of the present study are presented usingMATLAB.In addition to these,some simulations of partial differential equations are also shown using software for graphing surface plots of velocity profile and streamlines along with surface plots and isothermal contours of the temperature profile.

ON INTEGRABILITY UP TO THE BOUNDARY OF THE WEAK SOLUTIONS TO A NON-NEWTONIAN FLUID

This work consider boundary integrability of the weak solutions of a non-Newtonian compressible fluids in a bounded domain in dimension three, which has the constitutive equartions as ■The existence result of weak solutions can be get based on Galerkin approximation. With the linear operator B constructed by BOGOVSKII, we show that the density ■is square integrable up to the boundary.

GLOBAL EXISTENCE OF STRONG SOLUTIONS OF NAVIER-STOKES EQUATIONS WITH NON-NEWTONIAN POTENTIAL FOR ONE-DIMENSIONAL ISENTROPIC COMPRESSIBLE FLUIDS

The aims of this paper are to discuss global existence and uniqueness of strong solution for a class of isentropic compressible navier-Stokes equations with non-Newtonian in one-dimensional bounded intervals. We prove two global existence results on strong solutions of isentropic compressible Navier-Stokes equations. The first result shows only the existence. And the second one shows the existence and uniqueness result based on the first result, but the uniqueness requires some compatibility condition.

Effects of renal artery stenosis on realistic model of abdominalaorta and renal arteries incorporating fluid-structureinteraction and pulsatile non-Newtonian blood flow

The effects of the renal artery stenosis （RAS） on the blood flow and vessel walls are investigated. The pulsatile blood flow through an anatomically realistic model of the abdominal aorta and renal arteries reconstructed from CT-scan images is simulated, which incorporates the fluid-structure interaction （FSI）. In addition to the investigation of the RAS effects on the wall shear stress and the displacement of the vessel wall, it is determined that the RAS leads to decrease in the renal mass flow. This may cause the activation of the renin-angiotension system and results in severe hypertension.

Influence of chemical reaction on heat and mass transfer of non-Newtonian fluid with yield stress by free convection from vertical surface in porous medium considering Soret effect

The effect of chemical reaction on free convection heat and mass transfer for a non-Newtonian power law fluid over a vertical flat plate embedded in a fluid-saturated porous medium has been studied in the presence of the yield stress and the Soret effect. The governing boundary layer equations and boundary conditions are cast into a dimen- sionless form by similarity transformations, and the resulting system of equations is solved by a finite difference method. The results are preSented and discussed for concentration profiles, as well as the Nusselt number and the Sherwood number for various values of the parameters, which govern the problem. The results obtained show that the flow field is influenced appreciably by the presence of the chemical reaction parameter γ the order of.the chemical reaction parameter m, the Soret number St, the buoyancy ratio N, the Lewis number Le, and the dimensionless rheological parameter Ω.

EXISTENCE OF THE UNIFORM TRAJECTORY ATTRACTOR FOR A 3D INCOMPRESSIBLE NON-NEWTONIAN FLUID FLOW

This paper studies the trajectory asymptotic behavior of a non-autonomous in- compressible non-Newtonian fluid in 3D bounded domains. In appropriate topologies, the authors prove the existence of the uniform trajectory attractor for the translation semigroup acting on the united trajectory space.

STABILITY OF BOUNDARY LAYER TO AN OUTFLOW PROBLEM FOR A COMPRESSIBLE NON-NEWTONIAN FLUID IN THE HALF SPACE

This paper investigates the large-time behavior of solutions to an outflow problem for a compressible non-Newtonian fluid in a half space. The main concern is to analyze the phenomena that happens when the compressible non-Newtonian fluid blows out through the boundary. Based on the existence of the stationary solution, it is proved that there exists a boundary layer(i.e., the stationary solution) to the outflow problem and the boundary layer is nonlinearly stable under small initial perturbation.

Free-surface Simulations of Newtonian and Non-Newtonian Fluids with the Lattice Boltzmann Method

This paper describes the application of a three-dimensional lattice Boltzmann method （LBM） to Newtonian and non-Newtonian （Bingham fluid in this work） flows with free surfaces. A mass tracking algorithm was incorporated to capture the free surface, whereas Papanastasiou＇s modified model was used for Bingham fluids. The lattice Boltzmann method was first validated using two benchmarks： Newtonian flow through a square cross-section tube and Bingham flow through a circular cross-section tube. Afterward, the dam-break problem for the Newtonian fluid and the slump test for Bingham fluid were simulated to validate the free-surface-capturing algorithm. The numerical results were in good agreement with analytical results, as well as other simulations, thereby proving the validity and correctness of the current method. The proposed method is a promising substitute for time-consuming and costly physical experiments to solve problems encountered in geotechnical and geological engineering, such as the surge and debris flow induced by a landslide or earthquake.

Non-Newtonian effect on natural convection flow over cylinder of elliptic cross section

The non-Newtonian effect in the boundary layer flow over a horizontal elliptical cylinder is investigated numerically. A modified power-law viscosity model is used to correlate the non-Newtonian characteristics of the fluid flow. For natural convectionflows, the surface of the cylinder is maintained by the uniform surface temperature(UST)or the uniform heat flux(UHF) condition. The governing equations corresponding to theflow are first transformed into a dimensionless non-similar form using suitable transformations. The resulting equations are solved numerically by an efficient finite difference scheme. The numerical results are presented for the skin friction coefficient and the local Nusselt number with the eccentric angle for different values of the power-law index n. The local skin friction coefficient and the local Nusselt number are found to be higher and lower, respectively, for the shear thickening fluids(n > 1) than the other fluids(n≤1).The effects of different elliptical configurations on the average Nusselt number are also presented and discussed for both conditions of the surface temperature.

Boundary-layer non-Newtonian flow over vertical plate in porous medium saturated with nanofluid

The free convective heat transfer to the power-law non-Newtonian flow from a vertical plate in a porous medium saturated with nanofluid under laminar conditions is investigated. It is considered that the non-Newtonian nanofluid obeys the mathematical model of power-law. The model used for the nanofluid incorporates the effects of Brown- ian motion and thermophoresis. The partial differential system governing the problem is transformed into an ordinary system via a usual similarity transformation. The numer- ical solutions of the resulting ordinary system are obtained. These solutions depend on the power-law index n, Lewis number Le, buoyancy-ratio number Nr, Brownian motion number Nb, and thermophoresis number Nt. For various values of n and Le, the effects of the influence parameters on the fluid behavior as well as the reduced Nusselt number are presented and discussed.