Esophageal inserted subclavian catheter:a rare complication

Central venous catheterization(CVC) is an invasive procedure for administering fluids,nutrients,and drugs;monitoring central venous pressure;performing pulmonary artery catheterization;and placing transvenous pacemakers in intensive care units and all specialties,from anesthesia to emergency medicine,for the treatment of trauma and hemodynamically unstable pediatric and adult patients.[1,2]Complications have been observed in more than 15% of patients who underwent CVC.Mechanical,infectious,and thrombotic complications have been reported in 5%–19%,5%–26%,and 2%–26% of patients,respectively.[3] Malposition,on the other hand,is common in subclavian catheter insertion and is usually associated with an initially misplaced guidewire.[4]

An efficient method for constructing a random insertional mutant library for forward genetics in Nannochloropsis oceanica

Insertional mutation,phenotypic evaluation,and mutated gene cloning are widely used to clone genes from scratch.Exogenous genes can be integrated into the genome during non-homologous end joining(NHEJ)of the double-strand breaks of DNA,causing insertional mutation.The random insertional mutant library constructed using this method has become a method of forward genetics for gene cloning.However,the establishment of a random insertional mutant library requires a high transformation efficiency of exogenous genes.Many microalgal species show a low transformation efficiency,making constructing random insertional mutant libraries difficult.In this study,we established a highly efficient transformation method for constructing a random insertional mutant library of Nannochloropsis oceanica,and tentatively tried to isolate its genes to prove the feasibility of the method.A gene that may control the growth rate and cell size was identified.This method will facilitate the genetic studies of N.oceanica,which should also be a reference for other microalgal species.

Velamentous Cord Insertion: Interest of Antenatal Diagnosis and Review of the Literature

Velamentous insertion of the umbilical cord corresponds to the insertion of the cord directly on amniotic membranes. It is a rare situation whose frequency varies from 0.5% to 1.69% of single pregnancies. It must be diagnosed during the morphological ultrasound of the 2nd trimester, actively looking for the association with a vasa previa, due to the risk of fetal haemorrhagic threat. We report an antenatal diagnosis of velamentous cord insertion and its management with literature review.

Tubular Heat Enhancement Using Twisted Tape Inserts with Large Holes

Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.

Lower extremity peripherally inserted central catheter placement ectopic to the ascending lumbar vein:A case report

BACKGROUND Peripherally inserted central catheters(PICCs)are an essential infusion route for oncology patients receiving intravenous treatments,but lower extremity veni-puncture is the preferred technique for patients with superior vena cava syndrome(SVCS).We report the case of a patient with a lower extremity PICC ectopic to the ascending lumbar vein,to indicate and verify PICC catheterisation in the lower extremity is safe and feasible.And hope to provide different per-spectives for clinical PICC venipuncture to get the attention of peers.CASE SUMMARY On 24 August 2022,a 58-year-old male was admitted to our department due to an intermittent cough persisting for over a month,which worsened 10 d prior.Imaging and laboratory investigations suggested the patient with pulmonary malignancy and SVCS.Chemotherapy was not an absolute contraindication in this patient.Lower extremity venipuncture is the preferred technique because administering upper extremity venous transfusion to patients with SVCS can exacerbate oedema in the head,neck,and upper extremities.The patient and his family were informed about the procedure,and informed consent was obtained.After successful puncture and prompt treatment,the patient was discharged,experiencing some relief from symptoms.CONCLUSION Inferior vena cava catheterisation is rare and important for cancer patients with SVCS,particularly in complex situations involving ectopic placement.

Treatment of benign rectal stricture caused by repeated anal insertion by endoscopy and balloon dilation:A case report

BACKGROUND Benign rectal strictures can be categorized as primary(disease-related)and secondary(surgical anastomosis-related).Secondary strictures arise from surgical complications,whereas primary strictures have diverse etiologies,including various inflammatory conditions.Benign strictures are usually managed by surgery and endoscopy.We present an unusual etiology of benign rectal stricture caused by the repeated insertion of foreign objects into the rectum for sexual purposes,resulting in rectal injury and subsequent chronic inflammation.CASE SUMMARY A 53-year-old man presented to the outpatient clinic of the Colorectal Surgery Department with symptoms of chronic constipation and bloody stools.The patient previously experienced rectal injury due to foreign object insertion for sexual purposes.Colonoscopy revealed benign circumferential narrowing of the rectum.He underwent treatment by endoscopic argon plasma coagulation and balloon dilation and follow-up as an outpatient for 4 months.A colonoscopy at the end of the follow-up period revealed no evidence of rectal stricture relapse.CONCLUSION A history of rectal injury,followed by chronic inflammation,should be considered in patients with benign rectal strictures.Management with endoscopic argon plasma coagulation and balloon dilation can prevent the need for surgical resection of benign rectal strictures.

Relationships between distribution characteristics of ceramic fragments and anti-penetration performance of ceramic composite bulletproof insert plates

Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.

Atomic-scale insights of indium segregation and its suppression by GaAs insertion layer in InGaAs/AlGaAs multiple quantum wells

The In segregation and its suppression in InGaAs/AlGaAs quantum well are investigated by using high-resolution x-ray diffraction(XRD)and photoluminescence(PL),combined with the state-of-the-art aberration corrected scanning transmission electron microscopy(Cs-STEM)techniques.To facility our study,we grow two multiple quantum wells(MQWs)samples,which are almost identical except that in sample B a thin GaAs layer is inserted in each of the InGaAs well and AlGaAs barrier layer comparing to pristine InGaAs/AlGaAs MQWs(sample A).Our study indeed shows the direct evidences that In segregation occurs in the InGaAs/AlGaAs interface,and the effect of the Ga As insertion layer on suppressing the segregation of In atoms is also demonstrated on the atomic-scale.Therefore,the atomic-scale insights are provided to understand the segregation behavior of In atoms and to unravel the underlying mechanism of the effect of GaAs insertion layer on the improvement of crystallinity,interface roughness,and further an enhanced optical performance of InGaAs/AlGaAs QWs.

Health Monitoring of Milling Tool Inserts Using CNN Architectures Trained by Vibration Spectrograms

In-process damage to a cutting tool degrades the surface􀀀nish of the job shaped by machining and causes a signi􀀀cant􀀀nancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty con􀀀gurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.

利用Insert技术在Hive数据仓库中处理数据的应用研究

对Hive数据仓库的设计与环境搭建过程进行简单介绍,着重介绍利用Insert技术在Hive数据仓库中对数据进行导入导出的方法。这两种方式在学习Hive数据仓库的技术上和实际生产环境中,都具有重要的意义。

Complications Related to the Insertion Technique of Jadelle® Contraceptive Implants

Introduction: Contraceptive implants are one of the most effective methods of birth spacing. Jadelle® implants consist of two strands that are easy to insert and remove. Although their effectiveness is no longer in question, their use (insertion) requires a surgical procedure with the corollary possibility of complications. These are mainly insertions that are too deep (in the arm muscle), vascular and nerve damage. Material and Methods: Our study focused on complications related to implant insertion. It was a descriptive and retrospective study over thirty-four months, from October 2016 to July 2019, and concerned all patients seen in consultation and who presented a complication related to the insertion of contraceptive implants in the Department of Gynecology and Obstetrics of the National Hospital of Pikine. Results: We collected nine complications managed at the Gynecology and Obstetrics Department of the Centre Hospitalier National de Pikine from 2016 to 2019. These were insertions that were too deep with sometimes nerve damage, infection or incident during anesthesia. The operative procedures were based on the type of complication. Conclusion: Although Jadelle® has the advantage of having only 2 rods compared to its predecessor Norplant®, its use is also conditioned by insertion and removal procedures which may experience complications.

Complicated expansion trajectories of insertion sequences and potential association with horizontal transfer of Wolbachia DNA

DEAR EDITOR,Insertion sequences(ISs) are the simplest structural transposable elements(TEs) in prokaryotes, consisting only of a transposase coding sequence and its bilateral short terminal inverted repeats. Due to their gradually streamlined genomic construction, TEs rarely exist in the genomes of obligate endosymbionts. However, TE content, especially ISs.

Promoter insertion leads to polyembryony in mango-a case of convergent evolution with citrus

Sexual reproduction in plants is the main pathway for creating new genetic combinations in modern agriculture.In heterozygous plants,after the identification of a plant with desired traits,vegetative propagation(cloning)is the primary path to create genetically uniform plants.Another natural plant mechanism that creates genetically uniform plants(clones)is apomixis.In fruit crops like citrus and mango,sporophytic apomixis results in polyembryony,where seeds contain multiple embryos,one of which is sexually originated and the others are vegetative clones of the parent mother tree.Utilizing the mango genome and genetic analysis of a diverse germplasm collection,we identified MiRWP as the gene that causes polyembryony in mango.There is a strong correlation between a specific insertion in the gene’s promoter region and altered expression in flowers and developing fruitlets,inducing multiple embryos.The MiRWP gene is an ortholog of CitRWP that causes polyembryony in citrus.Based on the data,we speculate that promoter insertion events,which occurred independently in citrus and mango,induced nucellar embryogenesis.The results suggest convergent evolution of polyembryony in the two species.Further work is required to demonstrate the utility of these genes(mango and citrus)in other biological systems as a tool for the clonal production of other crops.

Effect of the Arrangement of a New-Type of Turbulator Inserts on Heat Pipe Exchanger Performances

This research tests the effect of introducing turbulators of a new type into a circular tube heat exchanger under a constant and uniform longitudinal heatflux condition.A 45 mm diameter copper tube with a length of 1,350 mm is utilized with a solid disk being inserted inside the tube,which consists of three sections,each one containing two slots.The slot is cut at a 45 degree angle toward the inner tube surface,which results in diverging theflow toward the inner hot tube surface in order to enhance the heat transfer process.Air is considered as the workingfluid with Prandtl number 0.71.The Reynolds number spans the interval from 6,000–13,500,which indicates that the consideredflow is turbulent.The heat exchanger performance is studied and analyzed in terms of average Nusselt number.The experimental results show that the Nusselt number value is directly proportional to the increase of the Reynolds number,and the number of turbulators inserts.With the use of three novel turbulators,the heat transfer was about 3.15 times higher than that in the smooth tube and the friction factor was about 1.11.

In-situ cation-inserted MnO_(2) with selective accelerated intercalation of individual H^(+) or Zn^(2+) ions in aqueous zinc ion batteries

The recognized energy storage mechanism of neutral aqueous zinc-manganese batteries is the co-insertion/extrusion of H^(+) and Zn^(2+) ions.However,modulating the kinetics of a single H^(+) or Zn^(2+) ion is scarce,which can provide meaningful insights into the energy storage mechanism of Zn ion batteries.Herein,a distinctive doubly electric field in-situ induced cationic anchoring of two-dimensional layered MnO_(2) is successfully constructed to modulate the insertion/extrusion of a single H^(+) or Zn^(2+) ion.As a result,regulating the intercalation of different metal ions can precisely achieve the accelerated induction for the individual H^(+) or Zn^(2+) ions intercalation/deintercalation.Moreover,the introduction of metal ions stabilizes the lattice distortion and alleviates the irreparable structural collapse,leading to an increase in the H^(+)/Zn^(2+) storage sites,efficiently diminishing the stagnation of the ordered structure and creating the more open channels,which is conducive to facilitating the diffusion of ions.This work delivers some innovative insights into pre-embedding strategies,and also serves as a precious reference for the cathode development of advanced aqueous batteries.

Study on liquid–liquid two-phase mass transfer characteristics in the microchannel with deformed insert

In this work, the liquid-liquid two-phase mass transfer characteristics in the microchannel with deformed insert were studied. The experiment used di-(2-ethylhexyl) phosphoric acid/kerosene-Cu^(2+)as the mass transfer evaluation system. The effects of some key factors such as the total flow velocity,channel inner diameter, channel length, insert diameter, extractant concentration on the extraction efficiency and mass transfer coefficient were systematically investigated. Compared with a simple microreactor, the liquid-liquid mass transfer enhancement effect of the insert was quantitatively analyzed. The study found that the regular deformation of the insert could cause fluid interface deformation and promote flow state chaos, effectively increasing the mass transfer rate. And the enhancement effect of the insert was more significant at high flow velocities. The highest mass transfer coefficient in the microchannel with deformed insert was 7.886 s^(-1), the enhancement factor could reach 4.17. And only needed 0.095 s to approach the extraction equilibrium. The deformed center insert exhibited an effective liquid-liquid mass transfer enhancement effect, which can be used as a micro-chemical process enhancement method to be applied in the fields of higher throughput mass transfer and chemical synthesis,and at the same time provide ideas for development and structural optimization of microreactors.

Novel GaN-based double-channel p-heterostructure field-effect transistors with a p-GaN insertion layer

GaN-based p-channel heterostructure field-effect transistors(p-HFETs)face significant constraints on on-state currents compared with n-channel high electron mobility transistors.In this work,we propose a novel double heterostructure which introduces an additional p-GaN insertion layer into traditional p-HFETs.The impact of the device structure on the hole densities and valence band energies of both the upper and lower channels is analyzed by using Silvaco TACD simulations,including the thickness of the upper AlGaN layer and the doping impurities and concentration in the GaN buffer layer,as well as the thickness and Mg-doping concentration in the p-GaN insertion layer.With the help of the p-GaN insertion layer,the C-doping concentration in the GaN buffer layer can be reduced,while the density of the two-dimensional hole gas in the lower channel is enhanced at the same time.This work suggests that a double heterostructure with a p-GaN insertion layer is a better approach to improve p-HFETs compared with those devices with C-doped buffer layer alone.

Numerical study on the hydrodynamics behavior of a central insert microchannel

In this work, the computational fluid dynamics method is used to study the liquid hydrodynamics behavior in the microchannel without central insert(MC1) and the central insert microchannel(MC2), respectively. The maximum deviation between simulation and experiment is 24%. The formations of flow patterns are explained based on contours and force analysis where the flow pattern maps are established by two-phase flow rate. The effects of aqueous phase viscosity and two-phase flow rate on the characteristic sizes of each flow pattern are also explored. Specifically, four unconventional flow patterns are found in MC2, namely the unique droplet flow, the unique slug flow, the unique coarse annular flow and the unique film annular flow. Though the insert occupies part of the channel, the pressure difference in the channel is significantly reduced compared with MC1. Moreover, the insert significantly changes the formation velocity range of each flow pattern, greatly broadens the formation range of annular flow and also has an important influence on the characteristic size of the flow pattern. The organic-phase dimensionless axial size(Lo/W) and the dimensionless radial size(Do/W) of the droplet(slug) are negatively related to the aqueous-phase viscosity(μa) and flow rate(ua). The Do/W of the annular is negatively correlated with μaand positively correlated with organic-phase flow rate(uo). This study provides direct numerical evidence that the insert is key to the formation of bicontinuous phase flow pattern, as well as further strengthens our understanding of the flow characteristics and optimization design of insert microchannels.

Analysis of Friction and Heat Transfer Characteristics of Tubes with Trapezoidal Cut Twisted Tape Inserts

The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to 1990.Tapes twisted with the three distinct twist ratios are considered,namely,6,4.4 and 3.Air is used as the working fluid in several tests.For the sake of comparison,the standard tube with no insert is also examined.It is shown that in the presence of the twisted tape,the‘frictional factor’,‘Nusselt Number’and the‘thermal performance factor’are much higher than those obtained for the plain tube.Moreover,the tapes having the lowest twist ratio,i.e.,3,are more effective than the others in terms of heat transfer augmentation.The‘thermal performance factor’is greater than one for all the twisted tapes used in the experiments,which confirms the enhanced performances of the heat exchanger and the related savings in terms of total energy.

Researchers Develop New Tools for Precise Large DNA Insertions

GAO Caixia’s group from the Institute of Genetics and Developmental Biology(IGDB)of the Chinese Academy of Sciences(CAS)has developed a new genome editing technology that achieves efficient and precise targeted insertion of large DNA segments in plants.The new technology,called prime editing-mediated recombination of opportune targets(PrimeRoot),combines an optimized dual-ePPE editor protein previously published by the group with a highly efficient tyrosine site-specific recombinase,Cre.It can achieve one-step,precise targeted insertion of large DNA segments in rice and maize with an efficiency up to 6%and has been used to successfully insert DNA segments up to 11.1 kb.