Experimental and numerical investigation of droplet flow mechanisms at fracture intersections

Understanding unsaturated flow behaviors in fractured rocks is essential for various applications.A fundamental process in this regard is flow splitting at fracture intersections.However,the impact of geometrical properties of fracture intersections on flow splitting is still unclear.This work investigates the combined influence of geometry(intersection angle,fracture apertures,and inclination angle),liquid droplet length,inertia,and dynamic wetting properties on liquid splitting dynamics at fracture intersections.A theoretical model of liquid splitting is developed,considering the factors mentioned above,and numerically solved to predict the flow splitting behavior.The model is validated against carefullycontrolled visualized experiments.Our results reveal two distinct splitting behaviors,separated by a critical droplet length.These behaviors shift from a monotonic to a non-monotonic trend with decreasing inclination angle.A comprehensive analysis further clarifies the impacts of the key factors on the splitting ratio,which is defined as the percentage of liquid volume entering the branch fracture.The splitting ratio decreases with increasing inclination angle,indicating a decrease in the gravitational effect on the branch fracture,which is directly proportional to the intersection angle.A non-monotonic relationship exists between the splitting ratio and the aperture ratio of the branch fracture to the main fracture.The results show that as the intersection angle decreases,the splitting ratio increases.Additionally,the influence of dynamic contact angles decreases with increasing intersection angle.These findings enhance our understanding of the impact of geometry on flow dynamics at fracture intersections.The proposed model provides a foundation for simulating and predicting unsaturated flow in complex fractured networks.

MULTIPLE INTERSECTIONS OF SPACE-TIME ANISOTROPIC GAUSSIAN FIELDS

Let X={X(t)∈R^(d),t∈R^(N)}be a centered space-time anisotropic Gaussian field with indices H=(H_(1),…,H_(N))∈(0,1)~N,where the components X_(i)(i=1,…,d)of X are independent,and the canonical metric√(E(X_(i)(t)-X_(i)(s))^(2))^(1/2)(i=1,…,d)is commensurate with■for s=(s_(1),…,s_(N)),t=(t_(1),…,t_(N))∈R~N,α_(i)∈(0,1],and with the continuous functionγ(·)satisfying certain conditions.First,the upper and lower bounds of the hitting probabilities of X can be derived from the corresponding generalized Hausdorff measure and capacity,which are based on the kernel functions depending explicitly onγ(·).Furthermore,the multiple intersections of the sample paths of two independent centered space-time anisotropic Gaussian fields with different distributions are considered.Our results extend the corresponding results for anisotropic Gaussian fields to a large class of space-time anisotropic Gaussian fields.

Analysis of Stopping Behavior at Rural T-Intersections Using Naturalistic Driving Study Data

Rural intersections account for around 30% of crashes in rural areas and 6% of all fatal crashes, representing a significant but poorly understood safety problem. Crashes at rural intersections are also problematic since high speeds on intersection approaches are present which can exacerbate the impact of a crash. Additionally, rural areas are often underserved with EMS services which can further contribute to negative crash outcomes. This paper describes an analysis of driver stopping behavior at rural T-intersections using the SHRP 2 Naturalistic Driving Study data. Type of stop was used as a safety surrogate measure using full/rolling stops compared to non-stops. Time series traces were obtained for 157 drivers at 87 unique intersections resulting in 1277 samples at the stop controlled approach for T-intersections. Roadway (i.e. number of lanes, presence of skew, speed limit, presence of stop bar or other traffic control devices), driver (age, gender, speeding), and environmental characteristics (time of day, presence of rain) were reduced and included as independent variables. Results of a logistic regression model indicated drivers were less likely to stop during the nighttime. However presence of intersection lighting increased the likelihood of full/rolling stops. Presence of intersection skew was shown to negatively impact stopping behavior. Additionally drivers who were traveling over the posted speed limit upstream of the intersection approach were less likely to stop at the approach stop sign.

{1012}twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

This study investigated the formation mechanism of new grains due to twin–twin intersections in a coarse-grained Mg–6Al–3Sn–2Zn alloy during different strain rates of an isothermal compression.The results of electron backscattered diffraction investigations showed that the activated twins were primarily{1012}tension twins,and 60°<1010>boundaries formed due to twin–twin intersections under different strain rates.Isolated twin variants with 60°<1010>boundaries transformed into new grains through lattice rotations at a low strain rate(0.01 s^(−1)).At a high strain rate(10 s^(−1)),the regions surrounded by subgrain boundaries through high-density dislocation arrangement and the 60°<1010>boundaries transformed into new grains via dynamic recrystallization.

Safe Efficient Policy Optimization Algorithm for Unsignalized Intersection Navigation

Unsignalized intersections pose a challenge for autonomous vehicles that must decide how to navigate them safely and efficiently.This paper proposes a reinforcement learning(RL)method for autonomous vehicles to navigate unsignalized intersections safely and efficiently.The method uses a semantic scene representation to handle variable numbers of vehicles and a universal reward function to facilitate stable learning.A collision risk function is designed to penalize unsafe actions and guide the agent to avoid them.A scalable policy optimization algorithm is introduced to improve data efficiency and safety for vehicle learning at intersections.The algorithm employs experience replay to overcome the on-policy limitation of proximal policy optimization and incorporates the collision risk constraint into the policy optimization problem.The proposed safe RL algorithm can balance the trade-off between vehicle traffic safety and policy learning efficiency.Simulated intersection scenarios with different traffic situations are used to test the algorithm and demonstrate its high success rates and low collision rates under different traffic conditions.The algorithm shows the potential of RL for enhancing the safety and reliability of autonomous driving systems at unsignalized intersections.

The prediction of projectile-target intersection for moving tank based on adaptive robust constraint-following control and interval uncertainty analysis

To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method proposed provides a novel way to predict the impact point of projectile for moving tank.First,bidirectional stability constraints and stability constraint-following error are constructed using the Udwadia-Kalaba theory,and an adaptive robust constraint-following controller is designed considering uncertainties.Second,the exterior ballistic ordinary differential equation with uncertainties is integrated into the controller,and the pointing control of stability system is extended to the impact-point control of projectile.Third,based on the interval uncertainty analysis method combining Chebyshev polynomial expansion and affine arithmetic,a prediction method of projectile-target intersection is proposed.Finally,the co-simulation experiment is performed by establishing the multi-body system dynamic model of tank and mathematical model of control system.The results demonstrate that the prediction method of projectile-target intersection based on uncertainty analysis can effectively decrease the uncertainties of system,improve the prediction accuracy,and increase the hit probability.The adaptive robust constraint-following control can effectively restrain the uncertainties caused by road excitation and model error.

Research of Fly over as a Solution to Congestion of Intersection Junction(Case Study:Jalan Jatingaleh Semarang)

In the next few years traffic will happen most of the time.This was triggered by the growing rate of vehicles against the road capacity which is not balance.All the time the congestion in the city of Semarang has been occurred at peak hours.Congestion also occurred in between Teuku Umar and Setia Budi road Jatingaleh because of a plot intersection(Kesatrian intersection,PLN intersection and Jatingaleh intersection)with the Toll Road.Jatingaleh is located in the southern city of Semarang which is a central meeting point between the upper and lower Semarang where the vehicle flows in through a combination of local current and regional traffic,and the flow of vehicles coming in and out from highway.The main cause of the problems that occurred in the area of Jatingaleh is due to the numbers of vehicles movement that occurs at the intersections.With the above issues,it is necessary to analyse the existing conditions and look into some solutions.Before carrying out an analysis a field surveys at peak hours for example morning(06:00 to 08:00 am)and for the afternoon(04:00 to 06:00 pm)should be conducted,then the number of vehicles is counted manually with“short-breakcounting”according to types of vehicles.From the analysis we found that the degree of saturation(DS)is 1.61 between Teuku Umar and Setia Budi road during the morning peak hours and 1.56 during the afternoon peak hours.This means that the capacity of the existing road is no longer able to accommodate the traffic flow.One of the solutions for the congestion that occurs at the intersection of Jatingaleh is to apply the efficiency of the intersection that is not in a plot with a Fly over,Underpass and the combination of Fly Over-Underpass.Base on the flow reduction calculation with 3 comparative modeling it shows that the Fly Over is the most technically efficient to be applied in this research.

Characteristics and risk of violation behavior of non-motorists at signalized intersections

Aiming at prevalent violations of non-motorists at urban intersections in China, this paper intends to clarify the characteristics and risks of non-motorist violations at signalized intersections through questionnaires and video recordings, which may serve as a basis for non-motorized vehicle management. It can help improve the traffic order and enhance the degree of safety at signalized intersections. To obtain the perception information, a questionaire survey on the Internet was conducted and 972 valid questionnaires were returned. It is found that academic degree contributes little to non-motorist violations, while electrical bicyclists have a relatively higher frequency of violations compared with bicyclists. The video data of 18 228 non-motorist behaviors indicate that the violation rate of all non-motorists is 26.5%; the number of conflicts reaches 1 938, among which violation conflicts account for 66.8%. The study shows that the violation rates and the violation behavior at three types of surveyed intersections are markedly different. It is also concluded that the conflict rates and the violation rates are positively correlated. Furthermore, signal violation, traveling in the wrong direction, and overspeeding to cross the intersection are the most dangerous among traffic violation behaviors.

Method for pedestrian signal timing at signalized intersections

The pedestrian timing at signalized intersections is studied aiming at the problems of the inconsistency of the vehicular and pedestrian timing requirements and the insufficiency of pedestrian clearance. Based on the formulae of WALK and flashing DON＇T WALK （FDW） in the highway capacity manual （HCM）, the relationship between pedestrian signal indications and vehicular signal indications is discussed using the theory of traffic flow. Then, methods of pedestrian timing for different cases are established, particularly the methods of the pedestrian green adjustment. Ways of pedestrian crossing are analyzed for roadways with different forms and widths of the median island. The sampling values of calculation parameters are studied, and the recommended formulae of pedestrian timing for different conditions are presented.

Ultrafast Dynamics Through Conical Intersections in 2,6-dimethylpyridine Studied with Time-resolved Photoelectron Imaging

The ultrafast dynamics through conical intersections in 2,6-dimethylpyridine has been studied by femtosecond time-resolved photoelectron imaging coupled with time-resolved mass spectroscopy. Upon absorption of 266 nm pump laser, 2,6-dimethylpyridine is excited to the S2 state with a ππ character from So state. The time evolution of the parent ion signals consists of two exponential decays. One is a fast component on a timescale of 635 fs and the other is a slow component with a timescale of 4.37 ps. Time-dependent photo- electron angular distributions and energy-resolved photoelectron spectroscopy are extracted from time-resolved photoelectron imaging and provide the evolutive information of S2 state. In brief, the ultrafast component is a population transfer from S2 to S1 through the S2/S1 conical intersections, the slow component is attributed to simultaneous IC from the S2 state and the higher vibrational levels of S1 state to So state, which involves the coupling of S2/S0 and S1/So conical intersections. Additionally, the observed ultrafast S2--＋S1 transition occurs only with an 18% branching ratio.

Multi-phase bus signal priority strategy at isolated intersections

To satisfy the multiple priority requests from buses that arrive at different phases within a small time window, a multi-phase bus signal priority （MPBSP） strategy is developed. The proximity principle is brought forward to settle the conflicts among multiple priority requests and arrange the optimal priority sequence. To avoid over saturation of the intersection, a conditional MPBSP algorithm that adopts early green and green extension strategies is developed to give priority to the bus with the highest priority level when green time that each phase runs makes its saturation degree not larger than 0. 95. Finally, the algorithm is tested in the VISSIM environment and compared with the normal signal timing algorithm. Sensitive analysis of the number of priority phases, bus demand, and volume to capacity ratios are conducted to quantify their impacts on the benefits of the MPBSP. Results show that the MPBSP strategy can effectively reduce bus delays, and with the increase in the number of priority phases, the reduction range of bus delays also increases.

Analytical method of minimum spacing of signalized intersections on bidirectional two-lane highways

In order to improve the smoothness of traffic flow on bidirectional two-lane highways, an analytical method is proposed to optimize the minimum spacing of the signalized intersections. The minimum signal spacing is determined by two parts, including the necessary distance for stabilizing the traffic flow after it passes through the signalized intersections and the length of the upstream functional area of intersection. For the former, based on the platoon dispersion theory, the stable distance determination problem of traffic flow is studied and a model of dispersion degrees varying with the distance from the upstream intersection is presented, in which the time headway is intended to yield the shifted negative exponential distribution. The parameters of the model for medal and collector highways are estimated respectively based on the field data. Then, the section at which the slope of dispersion degree curve equals -0.1 is regarded as the beginning of the dispersion stable state. The length of the intersection upstream functional area is determined by three parts, including the distance traveled during perception-reaction time, the distance traveled while a driver decelerates to a stop, and the queue storage length. Based on the above procedures, the minimum signal spacing of each highway category is proposed.

Vehicle conflict resolution algorithm at non-signalized crossing based on inter-vehicle communication

A vehicle conflict detection and resolution method is proposed based on the concept of vehicle infrastructure integration （VII） system to prevent vehicle accident beforehand at blind cross- ing. After analyzing traffic conflict characteristics and vehicle collision scenarios at intersection, a vehicle dynamics model and an inter-vehicle communication method are discussed. In the inter-vehi- cle communication environment, the relative relationship between two encountered vehicles are de- signed. Then vehicle conflict detection and resolution algorithms under two conflict scenarios are put forward to represent the conflict-free movements of vehicles with adjusting vehicle velocity at cross- ing. Finally, simulation studies are carried out and the results prove that the proposed algorithms are effective for vehicle conflict resolution at blind crossing.

Double-directional control bolt support technology and engineering application at large span Y-type intersections in deep coal mines

Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based on in-situ investigations and theoretical studies,we have summarized typical forms of destruction and identified high stress and unrestricted support at both sides of junction arch as its main causes.In this study,we also presented double-directional control bolt support technology for a large Y-type span intersection,applied to deep intersection engineering in the Jiahe Coal Mine,which has proved effective.

INTERSECTIONS AND POLAR FUNCTIONS OF FRACTIONAL BROWNIAN SHEETS

Let B^H={B^H（t）,t∈R^N＋}be a real-valued（N,d）fractional Brownian sheet with Hurst index H=（H1,…,HN）.The characteristics of the polar functions for B^H are discussed.The relationship between the class of continuous functions satisfying Lipschitz condition and the class of polar-functions of B^H is obtained.The Hausdorff dimension about the fixed points and the inequality about the Kolmogorov’s entropy index for B^H are presented.Furthermore,it is proved that any two independent fractional Brownian sheets are nonintersecting in some conditions.A problem proposed by LeGall about the existence of no-polar continuous functions satisfying the Holder condition is also solved.

Vehicle Motion Prediction at Intersections Based on the Turning Intention and Prior Trajectories Model

Intersections are quite important and complex traffic scenarios,where the future motion of surrounding vehicles is an indispensable reference factor for the decision-making or path planning of autonomous vehicles.Considering that the motion trajectory of a vehicle at an intersection partly obeys the statistical law of historical data once its driving intention is determined,this paper proposes a long short-term memory based(LSTM-based)framework that combines intention prediction and trajectory prediction together.First,we build an intersection prior trajectories model(IPTM)by clustering and statistically analyzing a large number of prior traffic flow trajectories.The prior trajectories model with fitted probabilistic density is used to approximate the distribution of the predicted trajectory,and also serves as a reference for credibility evaluation.Second,we conduct the intention prediction through another LSTM model and regard it as a crucial cue for a trajectory forecast at the early stage.Furthermore,the predicted intention is also a key that is associated with the prior trajectories model.The proposed framework is validated on two publically released datasets,next generation simulation(NGSIM)and INTERACTION.Compared with other prediction methods,our framework is able to sample a trajectory from the estimated distribution,with its accuracy improved by about 20%.Finally,the credibility evaluation,which is based on the prior trajectories model,makes the framework more practical in the real-world applications.

Planning and Decision-making for Connected Autonomous Vehicles at Road Intersections:A Review

Planning and decision-making technology at intersections is a comprehensive research problem in intelligent transportation systems due to the uncertainties caused by a variety of traffic participants.As wireless communication advances,vehicle infrastructure integrated algorithms designed for intersection planning and decision-making have received increasing attention.In this paper,the recent studies on the planning and decision-making technologies at intersections are primarily overviewed.The general planning and decision-making approaches are presented,which include graph-based approach,prediction base approach,optimization-based approach and machine learning based approach.Since connected autonomous vehicles(CAVs)is the future direction for the automated driving area,we summarized the evolving planning and decision-making methods based on vehicle infrastructure cooperative technologies.Both four-way signalized and unsignalized intersection(s)are investigated under purely automated driving traffic and mixed traffic.The study benefit from current strategies,protocols,and simulation tools to help researchers identify the presented approaches’challenges and determine the research gaps,and several remaining possible research problems that need to be solved in the future.

Analysis on intersections between fractures by parallel computation

The discrete fracture network model is a powerful tool for fractured rock mass fluid flow simulations and supports safety assessments of coal mine hazards such as water inrush.Intersection analysis,which identifies all pairs of intersected fractures(the basic components composing the connectivity of a network),is one of its crucial procedures.This paper attempts to improve intersection analysis through parallel computing.Considering a seamless interfacing with other procedures in modeling,two algorithms are designed and presented,of which one is a completely independent parallel procedure with some redundant computations and the other is an optimized version with reduced redundancy.A numerical study indicates that both of the algorithms are practical and can significantly improve the computational performance of intersection analysis for large-scale simulations.Moreover,the preferred application conditions for the two algorithms are also discussed.

Failure analysis and control technology of intersections of large‑scale variable cross‑section roadways in deep soft rock

In deep underground mining,achieving stable support for roadways along with long service life is critical and the complex geological environment at such depths frequently presents a major challenge.Owing to the coupling action of multiple factors such as deep high stress,adjacent faults,cross-layer design,weak lithology,broken surrounding rock,variable cross-sections,wide sections up to 9.9 m,and clusters of nearby chambers,there was severe deformation and breakdown in the No.10 intersection of the roadway of large-scale variable cross-section at the−760 m level in a coal mine.As there are insufcient examples in engineering methods pertaining to the geological environment described above,the numerical calculation model was oversimplifed and support theory underdeveloped;therefore,it is imperative to develop an efective support system for the stability and sustenance of deep roadways.In this study,a quantitative analysis of the geological environment of the roadway through feld observations,borehole-scoping,and ground stress testing is carried out to establish the FLAC 3D variable cross-section crossing roadway model.This model is combined with the strain softening constitutive(surrounding rock)and Mohr–Coulomb constitutive(other deep rock formations)models to construct a compression arch mechanical model for deep soft rock,based on the quadratic parabolic Mohr criterion.An integrated control technology of bolting and grouting that is mainly composed of a high-strength hollow grouting cable bolt equipped with modifed cement grouting materials and a high-elongation cable bolt is developed by analyzing the strengthening properties of the surrounding rock before and after bolting,based on the Heok-Brown criterion.As a result of on-site practice,the following conclusions are drawn:(1)The plastic zone of the roof of the cross roadway is approximately 6 m deep in this environment,the tectonic stress is nearly 30 MPa,and the surrounding rock is severely fractured.(2)The deformation of the roadway progressively increases from small to large cross-sections,almost doubling at the largest cross-section.The plastic zone is concentrated at the top plate and shoulder and decreases progressively from the two sides to the bottom corner.The range of stress concentration at the sides of the intersection roadway close to the passageway is wider and higher.(3)The 7 m-thick reinforced compression arch constructed under the strengthening support scheme has a bearing capacity enhanced by 1.8 to 2.3 times and increase in thickness of the bearing structure by 1.76 times as compared to the original scheme.(4)The increase in the mechanical parameters c andφof the surrounding rock after anchoring causes a signifcant increase inσt;the pulling force of the cable bolt beneath the new grouting material is more than twice that of ordinary cement grout,and according to the test,the supporting stress feld shows that the 7.24 m surrounding rock is compacted and strengthened in addition to providing a strong foundation for the bolt(cable).On-site monitoring shows that the 60-days convergence is less than 30 mm,indicating that the stability control of the roadway is successful.

ON INTERSECTIONS OF INDEPENDENT NONDEGENERATE DIFFUSION PROCESSES

Let X（1） = {X（1）（s）, s ∈ R＋} and X（2） = {X（2）（t）, t ∈ R＋} be two inde-pendent nondegenerate diffusion processes with values in Rd. The existence and fractal dimension of intersections of the sample paths of X （1） and X （2） are studied. More gener-ally, let E1, E2？（0,∞） and F ？Rd be Borel sets. A necessary condition and a suffcient condition for P{X（1）（E1）∩X（2）（E2）∩F 6=？}〉0 are proved in terms of the Bessel-Riesz type capacity and Hausdorff measure of E1 × E2 × F in the metric space （R＋× R＋× Rd,ρb）, whereρb is an unsymmetric metric defined in R＋× R＋× Rd. Under reasonable conditions, results resembling those of Browian motion are obtained.