Non-wovens Satisfy the Textile Industry at the Beginning of 2006

The economic performance of China’s non-woven industry in the first two months of

High Oil-absorptive Composites Prepared from Non-woven Fiber and Sponges with 4-tert- butylstyrene-EPDM-divinylbenzene Graft Polymer

4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectroscopy. The maximum oil-absorptivity of gel-PBED produced from the optinum reaction conditions was 8 420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gelPBED and was suitable for commercial purpose. After swelling in oil, neither gel PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics were evaluated by method ASTM (F726 - 81 ) and an experimental equation. The mechanical properties and the morphologies of some composites were measured by tensile tester and SEM , respectively.

Comparative Study of Polypropylene Non-Woven Surgical Mask and Locally Manufactured Woven and Knitted Fabrics Facial Masks

The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.

A STUDY OF THE SPECIMEN SIZE OF STRIP TENSILE TEST FOR NEEDLE-PUNCHED NON-WOVEN GEOTEXTILES

In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.

Hygrothermal/UV Aging Effect on Visual Aspect and Mechanical Properties of Non-Woven Natural-Fiber Composites

This work aims at studying the effect of hygrothermal and UV cyclic aging on the tensile properties and esthetic characteristics of non-woven composites.The composite materials were thermo-compressed from non-woven mats made up of PP and flax or kenaf fibers.This works included evaluating the change in color appearance and analyzing the variations in tensile properties and damage mechanisms,depending on the aging time.The presence of the UV protection film on the composite surface showed its effectiveness against aging.From visual observations and measurement of colorimetric parameters,it has been proved effective in the reduction of the bleaching and yellowing of the composites.As regards the tensile tests,the UV protection film enabled to stabilize the Young’s modulus after 1-week aging for Kenaf/PP and after 3-weeks for Flax/PP.After 4-weeks aging,it halved the number of acoustic emission events related to interfacial decohesion and fiber slippage/pull out for Flax/PP and Kenaf/PP composites.

Preparation of UV-curable Nano-silver Antimicrobial Agent and Its Application in Non-woven Fabric

Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.

A Cell-Based Smoothed Finite Element Method for Modal Analysis of Non-Woven Fabrics

The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures.This formulation was applied to numerous numerical examples of non-woven fabrics.As CSFEM schemes do not require coordinate transformation,spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two,three and four smoothing cells.An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors,which allowed to remove the integral operator in the strain smoothing operation.This procedure conducted both to the simplification of the developed formulation and the reduction of computational cost.A wide range of values for the thickness-to-length ratio and edge boundary conditions were analysed.The developed numerical model proved to overcome the shear locking phenomenon with success,revealing both reduced implementation effort and computational cost in comparison to the conventional FEM approach.The cell-based strain smoothing technique used in this work yields accurate results and generally attains higher convergence rate in energy at low computational cost.

Use of Polypropylene Non-woven as Sorbent of Oil Small

In this work, the mechanical tensile and elongation properties and the non-woven polypropylene flammability were evaluated, with variations of gratings, compared to non-woven fabrics prepared with thermo film and TNT （fabric non-fabric）, for applications such as geotextile sorption of oil spills. The results showed high values of tensile strength for non-woven fabric prepared for application as geotextile, improving the mechanical properties of rupture.

Beijing Dayuan Non-woven Fabric Co.Ltd

Situated in the Shilong Industrial District of Mentougou, Beijing, the Beijing Dayuan Non-woven Fabric Co. Ltd is a Sino-foreign joint venture producing non-woven fabrics, set up in 1991.

Cost analysis and comparison of plain cotton and disposable non-woven treatment towels

Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.

Modelling the Influence of Air Jet Configurations on Non-Woven Steel Fibre Mixing in the Melt Overflow Process

The mixing of non-woven steel fibres in melt overflow process for use in automotive muffler systems was simulated. The aim was to identify optimum parameters for achieving a good fibre mix. Numerical models of mixing chambers of melt overflow process were developed. Multiphysics analyses involving heat transfer, fluid flow and particle tracking were carried out using COMSOL code. The influence of air jet configurations on the fibre distribution was studied. The fibres settled on the moving bed within the mixing chamber were examined for their uniformity. The effect of additional air jets to the existing chamber in a range of regions was explored. An optimum configuration was identified by analyzing the compactness of the particle clusters deposited in the simulation and validated using pixel data acquired from real time imaging. The results showed that by employing dual air jets at the front end of the chamber, the density of the fibre material has improved. We conclude that through multi-physics modelling, it was possible to identify the optimum air-jet configurations leading to fibre uniformity and its distribution. This work also paves the way for incorporating a vision system to evaluate fibre density in real time.

Non-woven Industry Weaves a Beautiful Pattern

As one of the three backbone con- sumptions (apparel, home-textile, tech- textile or industrial applications), non- woven textile industry performed well in 2005, but problems still remain. An official from the State Development and Reform Commission - China’s top planner, mapped out economic blue- prints for this fast-growing sector in 2006.

Research on Flax Fiber Reinforced Polylactide Environmental Friendly Composite

Biodegradable polylactide acid （PLA） resin can be combined with flax fibers to produce biodegradable composite materials. In our study, commercial PLA fibers were mixed with flax fibers by a non-woven method so as to make non- woven pre-forms, which can be generated into flax fiber reinforced PLA environmental friendly composites by heat pressing technology. The tensile, flexural and impact properties are tested in order to evaluate the basic physical properties of the composites, and the influenced factors listed as making technology of the pre-forms, weight ratio of flax fibers and heat pressing technology are discussed and optimized, which can be described as weight ratio of flax fibers and PLA fibers is 50/50, heating temperature, time and pressure are respectively 195℃, 20 rain and 12.5 Mpa. Preliminary results show that mechanical properties of the flax/PLA composites are quite promising compared with flax/PP composites in coclrnon commercial automotive use. Scanning electron microscope （SEM） is used to analyze the tensile specimen fracture surfaces, which shows voids and gaps occurring between flax fibers and PLA matrix and sign of fiber pull.out, the strength of flax/PLA interface can be further improved.

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric(PP-g-AA)andpolypropylene membrane were reported.The extents of grafting were controlled by the plasma and polymerizationcondition.Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain apolyion complex(PIC).At last,CF_4 plasma was used to give PICs hydrophobic property.The moisture regain and water-repellency of the processed PICs was investigated.The surfaces were characterized using ATR FT-IR and XPS.The resultindicates that the products have very high ability to adsorb moisture,even better than cotton fiber.At the same time,theproducts show excellent hydrophobic property,which can't be wetted by those reagents whose surface tensions were higherthan 327 mN/m.

Relationships between the Processing Parameters of Melt Blown Nonwoven Fabric and Its Structure and Filtration Property

Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Questar micro-images in combination with the SEM observation and the measurement of some macrostructure indices, the relationship between the processing parameters and the structure especially the microstructure is emphasized Finally the effect of somestructure factors on filtration properties is discussed theoretically.

Fabric Structure for Moisture Retention Property and Its Application in Civil Engineering

The article reveals the development and analysis of fabric structure for its moisture absorbency property and its application in Civil engineering for curing of concrete. The presence of moisture in concrete and time of curing are the major influencing factors for concrete strength. Normal practice of curing is to wrap the concrete with jute woven fabric and spraying of water. The absorbency characteristics of different GSM (Gram per square meter) of woven and Non-woven fabric were studied. The Non-woven fabric absorbency is superior to woven fabric of same GSM by its three dimensional structure and high pore volume. The strength of concrete cured with Non- woven fabric is 2.1 N/mm2 higher than woven fabric of same 350 GSM. The difference in compressive strength of Non-woven fabric of 350 GSM and 750 GSM is 0.06 N/mm2 which is marginal.

Fabrication of Non-woven Fabric-Based SERS Substrate for Direct Detection of Pesticide Residues in Fruits

In surface-enhanced Raman scattering(SERS),flexible substrate plays an important role in target molecular collection from various shape surfaces and increases the analytical sensitivity.In this study,silver nanoparticles(Ag NPs)were deposited on a non-woven fabric used as an SERS substrate by self-assembly,in situ growing or the self-assembly/in situ growing combination method.4-Aminothiophenol was selected as a model molecular for the evaluation of the SERS performance using the substrates.The Ag NPs substrate prepared by self-assembly/in situ growing method presented the best Raman enhancement effect and its enhancement factor was estimated as high as 3.59106.The substrate was applied to the determination of four pesticide residues on the surfaces of fruit samples through wipe sampling,and the results revealed the good reproducibility of SERS responses and high detection sensitivity.The prepared flexible substrate was simple to fabricate and environmentally friendly.It could be expected to be a useful tool in rapid on-site test of pesticide residues on fruit surfaces because of its high sensitivity,convenience and non-destructive characteristics.

Efficient removal of tetracycline in water by a novel chemical and biological coupled system with non-woven cotton fabric as carrier

As a novel wastewater treatment strategy,the intimate coupling of photocatalysis and biodegradation(ICPB)has been attracted attention,which is ascribed to its combination of the advantages of photocatalytic reactions and biological treatment.The selection of carriers is important since it affects the stability of the system and the removal efficiency of pollutants.In this study,a novel ICPB system was successfully constructed by loading photocatalytic materials(i.e.,TiO_(2),N-TiO_(2),and Ag-TiO_(2))and microbes onto non-woven cotton fabric.The photocatalysts were characterized by scanning electron microscope-energy dispersive spectrometer(SEM-EDS),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).This system exhibited good performance in degrading tetracycline(TC)in water.The results showed that Ag-TiO_(2)-ICPB had the maximum removal efficiency of tetracycline(94.7%)in 5 h,which was 16.5%higher than the photocatalysis alone.After five cycles,82.9%of tetracycline could be still degraded through Ag-TiO_(2)-ICPB.SEM spectrum showed microbes on the material changed little before and after the reactions.This result implied the materials were stable,and then beneficial for degrading of pollutants continuously.The intermediates were detected through ultraperformance liquid chromatography-mass spectrometer(UPLC-MS)and the plausible degradation pathways were proposed.Electron paramagnetic resonance(EPR)analysis showed·OH and O_(2)·-were the main reactive oxygen species for TC degradation.In conclusion,the ICPB system with non-woven cotton fabric as a carrier has certain application prospects for antibiotic-containing wastewater.

A new kind of resin-based wet friction material:Non-woven fabrics with isotropic fiber networks as preforms

As an alternative to short fibers,non-woven fabrics(NWFs)were made using different types of long fibers to optimize the performance of paper-based friction materials and their technology.In this investigation,the fillers and resin were impregnated into these NWFs to prepare three kinds of wet friction material.The tribological,mechanical,and thermal properties of the new wet friction material were studied.The results indicate that the dynamic friction coefficient of the new friction material is approximately 0.12 and the static friction coefficient is approximately 0.15;the better wear rate is 0.81334×10^(-14)m^(3)·(N·m)^(-1).In addition,the temperature for 10%mass loss yielded 100°C enhancement and the tensile strength was improved by 200%,compared to previously reported values.Most importantly,the advantages include a simple preparation flow,low cost,and resource conservation.This is a promising approach for the future development of paper-based friction materials.