An Improved Control Vector Iteration Approach for Nonlinear Dynamic Optimization. II. Problems with Path Constraints

This paper considers dealing with path constraints in the framework of the improved control vector iteration （CVI） approach. Two available ways for enforcing equality path constraints are presented, which can be directly incorporated into the improved CVI approach. Inequality path constraints are much more difficult to deal with, even for small scale problems, because the time intervals where the inequality path constraints are active are unknown in advance. To overcome the challenge, the ll penalty function and a novel smoothing technique are in-troduced, leading to a new effective approach. Moreover, on the basis of the relevant theorems, a numerical algo-rithm is proposed for nonlinear dynamic optimization problems with inequality path constraints. Results obtained from the classic batch reaCtor operation problem are in agreement with the literature reoorts, and the comoutational efficiency is also high.

An Improved Control Vector Iteration Approach for Nonlinear Dynamic Optimization (Ⅰ) Problems Without Path Constraints

This study proposes an efficient indirect approach for general nonlinear dynamic optimization problems without path constraints. The approach incorporates the virtues both from indirect and direct methods: it solves the optimality conditions like the traditional indirect methods do, but uses a discretization technique inspired from direct methods. Compared with other indirect approaches, the proposed approach has two main advantages: (1) the discretized optimization problem only employs unconstrained nonlinear programming (NLP) algorithms such as BFGS (Broyden-Fletcher-Goldfarb-Shanno), rather than constrained NLP algorithms, therefore the computational efficiency is increased; (2) the relationship between the number of the discretized time intervals and the integration error of the four-step Adams predictor-corrector algorithm is established, thus the minimal number of time intervals that under desired integration tolerance can be estimated. The classic batch reactor problem is tested and compared in detail with literature reports, and the results reveal the effectiveness of the proposed approach. Dealing with path constraints requires extra techniques, and will be studied in the second paper.

THE EFFECTIVENESS OF GENETIC ALGORITHM IN CAPTURING CONDITIONAL NONLINEAR OPTIMAL PERTURBATION WITH PARAMETERIZATION “ON-OFF” SWITCHES INCLUDED BY A MODEL

In the typhoon adaptive observation based on conditional nonlinear optimal perturbation (CNOP), the ‘on-off’ switch caused by moist physical parameterization in prediction models prevents the conventional adjoint method from providing correct gradient during the optimization process. To address this problem, the capture of CNOP, when the "on-off" switches are included in models, is treated as non-smooth optimization in this study, and the genetic algorithm (GA) is introduced. After detailed algorithm procedures are formulated using an idealized model with parameterization "on-off" switches in the forcing term, the impacts of "on-off" switches on the capture of CNOP are analyzed, and three numerical experiments are conducted to check the effectiveness of GA in capturing CNOP and to analyze the impacts of different initial populations on the optimization result. The result shows that GA is competent for the capture of CNOP in the context of the idealized model with parameterization ‘on-off’ switches in this study. Finally, the advantages and disadvantages of GA in capturing CNOP are analyzed in detail.

Optimal contract wall for desired orientation of fibers and its effect on flow behavior

The orientation of suspended fibers in the turbulent contraction is strongly related to the contraction ratio,which in some cases may be detrimental to the actual production.Here for a certain contraction ratio,the contraction geometry shape is optimized to obtain the desired fiber orientation.In view of the nonlinearity and the complexity of the turbulent flow equations,the parameterized shape curve,the dynamic mesh and a quasi-static assumption are used to model the contraction with the variable boundary and to search the optimal solution.Furthermore the Reynolds stress model and the fiber orientation distribution function are solved for various wall shapes.The fiber orientation alignment at the outlet is taken as the optimization objective.Finally the effect of the wall shape on the flow mechanism is discussed in detail.