Numerical Exploration of Asymmetrical Impact Dynamics: Unveiling Nonlinearities in Collision Problems and Resilience of Reinforced Concrete Structures

This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems during a collision.The initial discussion revolves around the stress and strain of large deformation during a collision, followedby explanations of the fundamental finite element solution method for addressing such issues. The hourglassmode’s control methods, such as single-point reduced integration and contact-collision algorithms are detailedand implemented within the finite element framework. The paper further investigates the dynamic responseand failure modes of Reinforced Concrete (RC) members under asymmetrical impact using a 3D discrete modelin ABAQUS that treats steel bars and concrete connections as bond slips. The model’s validity was confirmedthrough comparisons with the node-sharing algorithm and system energy relations. Experimental parameterswere varied, including the rigid hammer’s mass and initial velocity, concrete strength, and longitudinal and stirrupreinforcement ratios. Findings indicated that increased hammer mass and velocity escalated RC member damage,while increased reinforcement ratios improved impact resistance. Contrarily, increased concrete strength did notsignificantly reduce lateral displacement when considering strain rate effects. The study also explores materialnonlinearity, examining different materials’ responses to collision-induced forces and stresses, demonstratedthrough an elastic rod impact case study. The paper proposes a damage criterion based on the residual axialload-bearing capacity for assessing damage under the asymmetrical impact, showing a correlation betweendamage degree hammer mass and initial velocity. The results, validated through comparison with theoreticaland analytical solutions, verify the ABAQUS program’s accuracy and reliability in analyzing impact problems,offering valuable insights into collision and impact problems’ nonlinearities and practical strategies for enhancingRC structures’ resilience under dynamic stress.

NEW ORGANIC NONLINEAR OPTICAL MATERIALS OF CINNAMYLIDENE-ACETOPHENONE DERIVATIVES

we have synthesised a series of new optically nonlinear organic materials of cinnamylidene-acetophenone derivatives which have large nonl inear optical susceptibilities and short cut-off wavelengths.

Nonlinear Hall Effect in Antiferromagnetic Half-Heusler Materials

It has recently been demonstrated that various topological states, including Dirac, Weyl, nodal-line, and triplepoint semimetal phases, can emerge in antiferromagnetic(AFM) half-Heusler compounds. However, how to determine the AFM structure and to distinguish different topological phases from transport behaviors remains unknown. We show that, due to the presence of combined time-reversal and fractional translation symmetry, the recently proposed second-order nonlinear Hall effect can be used to characterize different topological phases with various AFM configurations. Guided by the symmetry analysis, we obtain expressions of the Berry curvature dipole for different AFM configurations. Based on the effective model, we explicitly calculate the Berry curvature dipole, which is found to be vanishingly small for the triple-point semimetal phase, and large in the Weyl semimetal phase. Our results not only put forward an effective method for the identification of magnetic orders and topological phases in AFM half-Heusler materials, but also suggest these materials as a versatile platform for engineering the nonlinear Hall effect.

INCREMENTAL ANALYSIS FOR NONLINEAR RUBBER-LIKE MATERIALS BY HYBRID STRESS FINITE ELEMENT

In this paper, on the basis of the incremental Reissner variational principle.a nonlinear finite element analysis has been accomplished and a formulation of hybrid stress element has been presented for incompressible Mooney rubber-like materials. The corrected terms of the non-equilibrium force and the incompressibility deviation are considered in the formulation. The computed values of numerical example agree very closely with the exact solution.

SYNTHESIS AND CHARACTERIZATION OF NOVEL SOL-GEL DOPED ORGANIC/INORGANIC HYBRID NONLINEAR OPTICAL MATERIALS

hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) materials containing NHA and DO3 were synthesized by Sol-Gel process. The preparation and properties of two NLO materials were studied and characterized by FTIR, 1H-NMR, UV-VIS, SEM, DSC and SHG measurements. The results show that the maximum doping amounts of NHA and DO3 in two doped hybrid NLO materials are 7.2(wt)% and 11.3(wt)% respectively, and the corresponding second-order NLO coefficients (d33 values) are 2.91×10 8esu and 6.14×10 8esu. Two doped NLO materials have relatively good RT stability, after 90 days at RT the d33 values can maintain about 85% of their initial values, but after 10h at 100℃ can only maintain about 50% of their initial values. In this report, the reasons for high-temperature instability of doped materials were discussed, and the possible improvements were also suggested.

SYNTHESIS AND CHARAOTERIZATION OF NOVEL THERMOTROPIO LIQUID ORYSTALLINE POLYESTERS BEARING NONLINEAR OPTICAL AZOBENZENE SIDE GROUP

A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.

Group Contribution Method Supervised Neural Network for Precise Design of Organic Nonlinear Optical Materials

To rationalize the design of D-π-A type organic small-molecule nonlinear optical materials,a theory guided machine learning framework is constructed.Such an approach is based on the recognition that the optical property of the molecule is predictable upon accumulating the contribution of each component,which is in line with the concept of group contribution method in thermodynamics.To realize this,a Lewis-mode group contribution method(LGC)has been developed in this work,which is combined with the multistage Bayesian neural network and the evolutionary algorithm to constitute an interactive framework(LGC-msBNN-EA).Thus,different optical properties of molecules are afforded accurately and efficientlyby using only a small data set for training.Moreover,by employing the EA model designed specifically for LGC,structural search is well achievable.The origins of the satisfying performance of the framework are discussed in detail.Considering that such a framework combines chemical principles and data-driven tools,most likely,it will be proven to be rational and efficient to complete mission regarding structure design in related fields.

Geometric and material nonlinear analysis of tensegrity structures

A numerical method is presented for the large deflection in elastic analysis of tensegrity structures including both geometric and material nonlinearities.The geometric nonlinearity is considered based on both total Lagrangian and updated Lagrangian formulations,while the material nonlinearity is treated through elastoplastic stress-strain relationship.The nonlinear equilibrium equations are solved using an incremental-iterative scheme in conjunction with the modified Newton-Raphson method.A computer program is developed to predict the mechanical responses of tensegrity systems under tensile,compressive and flexural loadings.Numerical results obtained are compared with those reported in the literature to demonstrate the accuracy and efficiency of the proposed program.The flexural behavior of the double layer quadruplex tensegrity grid is sufficiently good for lightweight large-span structural applications.On the other hand,its bending strength capacity is not sensitive to the self-stress level.

MoS_2 saturable absorber prepared by chemical vapor deposition method for nonlinear control in Q-switching fiber laser

Due to the remarkable carrier mobility and nonlinear characteristic, MoS2 is considered to be a powerful competitor as an effective optical modulated material in fiber lasers. In this paper, the MoS2 films are prepared by the chemical vapor deposition method to guarantee the high quality of the crystal lattice and uniform thickness. The transfer of the films to microfiber and the operation of gold plated films ensure there is no heat-resistant damage and anti-oxidation. The modulation depth of the prepared integrated microfiber-MoS2 saturable absorber is 11.07%. When the microfiber-MoS2 saturable absorber is used as a light modulator in the Q-switching fiber laser, the stable pulse train with a pulse duration of 888 ns at 1530.9 nm is obtained. The ultimate output power and pulse energy of output pulses are 18.8 mW and 88 nJ, respectively. The signal-to-noise ratio up to 60 dB indicates the good stability of the laser. This work demonstrates that the MoS2 saturable absorber prepared by the chemical vapor deposition method can serve as an effective nonlinear control device for the Q-switching fiber laser.

Synthesis of AgGa_(1-x)In_(x)Se_(2) Polycrystalline Materials

AgGa_(1-x)In_(x)Se_(2)polycrystals were synthesized by the method of mechanical oscillation and temperature oscillation.X-ray diffraction spectra of polycrystal powder are conformable with the JCPDS cards.Lattice constants a and c calculated from the XRD were found to obey Vegard's law.The melting point of AgGa_(0.8)In_(0.2)Se_(2)obtained by means of differential scanning calorimetry(DSC)is 796.53℃.The DSC curve also show that there are no other transformation points below the melting point.The results indicate that polycrystalline materials synthesized by the method mentioned above are high-quality and can be used to grow single crystals by the vertical Bridgman technology.

SYNTHESIS AND OPTICAL PROPERTIES OF A NOVEL ORGANIC/INORGANIC HYBRID NONLINEAR OPTICAL POLYMER VIA SOL-GEL PROCESS

A new organic/inorganic hybrid nonlinear optical (NLO) material was developed by the sol-gel process of an alkoxysilane dye with tetraethoxysilane. A NLO moiety based on 4-nitro-4 ' -hydroxy azobenzene was covalently bonded to the triethoxysilane derivative, i.e, gamma -isocyanatopropyl triethoxysilane. The preparation process and properties of the sol-gel derived NLO polymer were studied and characterized by SEM, FTIR,H-1-NMR, UV-Vis, DSC and second harmonic generation (SHG) measurement. The results indicated that the chemical bonding of the chromophores to the inorganic SiO2 networks induces low dipole alignment relaxation and preferable orientational stability. The SHG measurements also showed that the bonded polymer film containing 75 wt% of the akoxysilane dye has a high electro-optic coefficient (r(33)) of 7.1 pm/V at 1.1 mum wavelength, and exhibit good SHG stability, the r(33) values can maintain about 92.7% of its initial value at room temperature for 90 days, and can maintain about 59.3% at 100 degreesC for 300 min.

Nonlinear dynamic characteristics of piles embedded in rock

The nonlinear dynamic characteristics of a pile embedded in a rock were investigated. Suppose that both the materials of the pile and the soil around the pile obey nonlinear elastic and linear viscoelastic constitutive relations. The nonlinear partial differential equation governing the dynamic characteristics of the pile was first derived. The Galerkin method was used to simplify the equation and to obtain a nonlinear ordinary differential equation. The methods in nonlinear dynamics were employed to solve the simplified dynamical system, and the time-path curves, phase-trajectory diagrams, power spectrum, Poincare sections and bifurcation and chaos diagrams of the motion of the pile were obtained. The effects of parameters on the dynamic characteristics of the system were also considered in detail.

Reliability analysis of circular concrete-filled steel tube with material and geometrical nonlinearity

Most of the previous research on concrete-filled steel tube is restricted to a deterministic approach. To gain clear insight into the random properties of circular concrete-filled steel tube, reliability analysis is carried out in the present study. To obtain the Structural nonlinear response and ultimate resistance capacity, material and geometrical nonlinear analysis of circular concrete-filled steel tube is performed with a three-dimensional degenerated beam ele- ment. Then we investigate the reliability of concrete-filled steel tube using the first-order reliability method combined with nonlinear finite element analysis. The influences of such parameters as material strength, slenderness, initial geo- metrical imperfection, etc. on the reliability of circular concrete-filled steel tube column are studied. It can be con- cluded that inevitable random fluctuation of those parameters has significant influence on structural reliability, and that stochastic or reliability methods can provide a more rational and subjective evaluation on the safety of CFT structures than a deterministic approach.

Low-threshold bistable reflection assisted by oscillating wave interaction with Kerr nonlinear medium

Owing to the enormously enhanced oscillating wave,a minute variation of the incident light intensity will give rise to a change in the dielectric constant of the Kerr nonlinear medium and lead to a bistable reflection with an ultra-low threshold intensity,which is closely related to the angle of incidence and the thickness of the Kerr nonlinear medium.The criterion for the existence of optical bistability is derived.Our bistability scheme is simple and not limited to the TM-polarization.

Linear and nonlinear optical analysis on semiorganic-proline cadmium chloride single crystal

In the current investigation,L-proline cadmium chloride monohydrate（LPCC） single crystal is grown by a slow solvent evaporation technique to identify its credibility for nonlinear optical device applications.The constituent elements of LPCC crystal are determined by the energy dispersive spectroscopic（EDS） technique.The single crystal x-ray diffraction technique is used to determine the structural dimensions of LPCC crystal.The UV-visible studies are carried out within a wavelength range of 200 nm–1100 nm to determine the optical transmittance of LPCC crystal.The linear optical parameters of LPCC crystal are evaluated using the transmittance data to discuss its importance for distinct optical devices.The Nd：YAG laser assisted Kurtz–Perry test is carried out to determine the enhancement in second harmonic generation efficiency of LPCC crystal with reference to KDP crystal.The Z-scan technique is employed to assess the third order nonlinear optical（TONLO） properties of LPCC crystal at 632.8 nm.The Z-scan data are utilized to evaluate the TONLO refraction,absorption and susceptibility of LPCC crystal.The color oriented luminescence behavior of LPCC crystal is investigated within a spectral range of 350 nm–700 nm.The dependence of dielectric constant and dielectric loss on temperature and frequency is evaluated through the dielectric measurement studies.

Synthesis and Nonlinear Optical Property of a Series of New Chromophores Containing Furan Ring as the Only Conjugation Bridge

This paper reports the synthesis and the nonlinear optical property of a series of new chromophores which contain furan ring as the only conjugation bridge for the first time. They are characterized by UV-VIS, FT-IR, H-1 NMR, MS and elemental analysis. Their dipole moment and the first-order molecular hyperpolarizability (beta) are calculated and compared with those or the analogues containing either benzene or thiophene as file conjugation bridge.

Optical nonlinearities of tetracarbonyl-chromium triphenyl phosphine complex

The new tetracarbonyl - chromium-triphenyl phosphine complex was synthesized and characterized using ultraviolet（UV）-visible,Fourier transform infrared（FTIR）,and nuclear magnetic resonance（NMR） techniques.The characterization results confirm the molecular structure of the new complex.The z-scan measurements were done by diode laser[continuous wave（CW）]to estimate the nonlinear optical parameter（X^3）.The results led to calculate three parameters：the groundstate cross sections（σ_g）,the excited-state cross sections（σ_（ex））,and thermo-optic coefficient of the new complex.This study indicated that our complex is a suitable for photonic applications.

Lithium Salt of NH_2-substituted Graphene Nanoribbon with Twofold Donor-acceptor Framework: Large Nonlinear Optical Property

Based on graphene, a new class of second-order nonlinear optical（NLO） material, the lithium salt of NH2-substituted graphene nanoribbon with the twofold donor（D）/acceptor（A） mode, was reported. Eight stable 2Li-2NH2-GNR lithium salts, especially cis lithium salts, display considerably large β0 values. The combination of NH2-substituting and cis Li-doping makes β0 greatly increased from 0（GNR） to 1.2×105―2.9×105 a.u.（cis-2Li- 2NH2-GNRs）. Our largest β0 value（2.9×105 a.u.） for cis-2Li-1,3-2NH2-AGNR is comparable to the record value of 1.7×105 a.u. for a long donor-acceptor polyene.

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis.This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior.Use of elastic moduli is eliminated.Instead,stress and strain functions are used as the material input in the analysis procedure.These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting.This way,the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior.It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results,easy to adopt and simple in calculations.The method eliminates all types of linearity assumptions in basic derivations of equations and hence,eliminates all types of possibility of errors in the analysis procedure as well.As it is required to know stress distribution in the structural body by proper modelling and structural idealization,the proposed analysis approach can be regarded as stress-based analysis procedure.Basic problems such as uniaxial problem,beam bending,and torsion problems are solved.It is found that approach is very suitable for solving the problems of fracture mechanics.Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated.The approach solves the fracture problem with relative ease in strength of material style calculations.For all problems,results are compared with the classical displacement-based liner theory.

Relationships between femoral strength evaluated by nonlinear finite element analysis and BMD,material distribution and geometric morphology

Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically