In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure a...In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure at the macro- and micro-mixed stages was investigated and the methods for determining mix-ture quality were put forward.展开更多
The effect of curing regime on the distribution ofAl3＋ coordination in hardened cement pastes within 28 d were investigated by 29Si and 27Al magic angle spinning （MAS） nuclear magnetic resonance（NMR） with deconvo...The effect of curing regime on the distribution ofAl3＋ coordination in hardened cement pastes within 28 d were investigated by 29Si and 27Al magic angle spinning （MAS） nuclear magnetic resonance（NMR） with deconvolution technique. The results indicate that the tetrahedral coordination Al3＋ incorporated in C-S-H structure mainly originate from the AP＋ incorporated in the alite and belite phases in the Portland cement. The curing regime of constant temperature of 20 ℃ is beneficial to the octahedral coordination Al3＋ transforming to tetrahedral coordination AP＋ incorporated in C-S-H structure. However, at curing regime of variable temperature, the temperature rising process is more advantageous to the transformation from ettringite to monosulphate, substitution of Al3＋ for Si4＋ in the C-S-H structure and the formation of the third aluminate hydrate （TAH） than that at constant temperature of 20 ℃. The high temperature of 60 ℃ in the holding temperature process promotes the decomposition of ettringite, and enhances the consumption of the Al3＋ incorporated in C-S-H phases and the Al3＋ in TAH for the monosulphate forming. The temperature decreasing promotes the transformation from monosulphate to ettringite, and increases the consumption of the Al3＋ incorporated in C-S-H phases, and then increases the quantity of the TAH.展开更多
The distributions of the axial stress and shear stress in Al2O3-TiC/Q235 diffusion bonded joints were studied using finite element method （FEM）. The effect of interlayer thickness on the axial stress and shear stres...The distributions of the axial stress and shear stress in Al2O3-TiC/Q235 diffusion bonded joints were studied using finite element method （FEM）. The effect of interlayer thickness on the axial stress and shear stress was also investigated. The results indicate that the gradients of the axial stress and shear stress are great near the joint edge. The maximal shear stress produces at the interface of the Al2O3-TIC and Ti interlayer. With the increase of Cu interlayer thickness, the magnitudes of the axial stress and shear stress first decrease and then increase. The distribution of the axial stress changes greatly with a little change in the shear stress. The shear fracture initiates at the interface of the Al2O3-TiC/ Ti interlayer with high shear stress and then propagates to the Al2O3-TIC side, which is consistent with the stress FEM calculating results.展开更多
The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and t...The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..展开更多
Compositionally undulating step-graded Al（Ga）InxAs （x = 0.05-0.52） buffers with the following InP layer were grown by metal-organic chemical vapor deposition （MOCVD） on （001） GaAs with a 15° miscut. The d...Compositionally undulating step-graded Al（Ga）InxAs （x = 0.05-0.52） buffers with the following InP layer were grown by metal-organic chemical vapor deposition （MOCVD） on （001） GaAs with a 15° miscut. The dislocation dis- tribution and tilts of the epilayers were examined using x-ray rocking curve and （004） reciprocal space maps （RSM） along two orthogonal （110） directions. The results suggested that such reverse-graded layers have different effects on a and 13 dislocations. A higher dislocation density was observed along the [ 110] direction and an epilayer tilt of - 1.43° was attained in the [1-10] direction when a reverse-graded layer strategy was employed. However, for conventional step-graded samples, the dislocation density is normally higher along the [1-10] direction.展开更多
The distributions of traps and electron density in the interfaces between polyimide （PI） matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering （SAXS）...The distributions of traps and electron density in the interfaces between polyimide （PI） matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering （SAXS） tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.展开更多
Resonance lines are extensively used to diagnose electronic temperature Te and ions distribution. However, the analysis of the x-ray spectroscopy emitted from plasmas produced by a ns laser Jsually needs the help of a...Resonance lines are extensively used to diagnose electronic temperature Te and ions distribution. However, the analysis of the x-ray spectroscopy emitted from plasmas produced by a ns laser Jsually needs the help of a code or some assumptions. In this paper, a diagnostic idea of using line-pairs emitted from a doubly-excited state is proposed. By using the method presented in this paper, Te and the fractional population ratio of bare nuclei and H-like ions are directly obtained from the emission intensity ratios.展开更多
Hypereutectic Al-Si alloy tubes were produced by centrifugal casting process using an electromagnetic field (EMF). A gradient distribution of the primary Si particles was formed along the tube thickness direction. In ...Hypereutectic Al-Si alloy tubes were produced by centrifugal casting process using an electromagnetic field (EMF). A gradient distribution of the primary Si particles was formed along the tube thickness direction. In the absence of EMF the primary Si moves to inner periphery with increasing rotation speed. The distribution of primary Si can be controlled by the EMF. With increasing electromagnetic field intensity, the primary Si moves from the inner periphery to the outer periphery of the tubes. Most of the primary Si can be driven to the outer if the electromagnetic field intensity is increased to a certain value. It is found that the particle distribution and local volume fraction vary with both the rotation speed and the electromagnetic field intensity.展开更多
从宏观和微观角度 ,系统地研究了粉末冶金法 Si Cp/ Al复合材料制备工艺对 Si Cp 分布均匀性的影响。研究结果表明 :混粉过程中 ,粉末混合物宏观均匀很容易达到 ,但微观均匀较差。干混存在最佳混合时间。挤压过程可大大提高 Si Cp 分布...从宏观和微观角度 ,系统地研究了粉末冶金法 Si Cp/ Al复合材料制备工艺对 Si Cp 分布均匀性的影响。研究结果表明 :混粉过程中 ,粉末混合物宏观均匀很容易达到 ,但微观均匀较差。干混存在最佳混合时间。挤压过程可大大提高 Si Cp 分布微观均匀性。展开更多
基金supported by the Key P rogram of National Natural Science Foundation of China(No.51931003)the National Natural Science Foundation of China(Nos.52271033,52071179)+1 种基金the Natural Science Foundation of Jiangsu Province,China(No.BK20221493)the Foundation of Qinglan Project for Colleges and Universities in Jiangsu Province,China.
文摘In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure at the macro- and micro-mixed stages was investigated and the methods for determining mix-ture quality were put forward.
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2009CB623201)
文摘The effect of curing regime on the distribution ofAl3＋ coordination in hardened cement pastes within 28 d were investigated by 29Si and 27Al magic angle spinning （MAS） nuclear magnetic resonance（NMR） with deconvolution technique. The results indicate that the tetrahedral coordination Al3＋ incorporated in C-S-H structure mainly originate from the AP＋ incorporated in the alite and belite phases in the Portland cement. The curing regime of constant temperature of 20 ℃ is beneficial to the octahedral coordination Al3＋ transforming to tetrahedral coordination AP＋ incorporated in C-S-H structure. However, at curing regime of variable temperature, the temperature rising process is more advantageous to the transformation from ettringite to monosulphate, substitution of Al3＋ for Si4＋ in the C-S-H structure and the formation of the third aluminate hydrate （TAH） than that at constant temperature of 20 ℃. The high temperature of 60 ℃ in the holding temperature process promotes the decomposition of ettringite, and enhances the consumption of the Al3＋ incorporated in C-S-H phases and the Al3＋ in TAH for the monosulphate forming. The temperature decreasing promotes the transformation from monosulphate to ettringite, and increases the consumption of the Al3＋ incorporated in C-S-H phases, and then increases the quantity of the TAH.
基金supported by National Natural Science Foundation of China (Grant No. 50874069)Development Project of Science and Technology of Shandong Province (2007GG10004016)+1 种基金Shandong Province Natural Science Foundation (Y2007F54)Excellent Mid-Youth Foundation of Shandong Province (2006BS04004)
文摘The distributions of the axial stress and shear stress in Al2O3-TiC/Q235 diffusion bonded joints were studied using finite element method （FEM）. The effect of interlayer thickness on the axial stress and shear stress was also investigated. The results indicate that the gradients of the axial stress and shear stress are great near the joint edge. The maximal shear stress produces at the interface of the Al2O3-TIC and Ti interlayer. With the increase of Cu interlayer thickness, the magnitudes of the axial stress and shear stress first decrease and then increase. The distribution of the axial stress changes greatly with a little change in the shear stress. The shear fracture initiates at the interface of the Al2O3-TiC/ Ti interlayer with high shear stress and then propagates to the Al2O3-TIC side, which is consistent with the stress FEM calculating results.
基金TheNationalNaturalScienceFoundationofChina (No .2 96 770 0 4)
文摘The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..
基金Project supported by the National Natural Science Foundation of China(Grant No.61376065)
文摘Compositionally undulating step-graded Al（Ga）InxAs （x = 0.05-0.52） buffers with the following InP layer were grown by metal-organic chemical vapor deposition （MOCVD） on （001） GaAs with a 15° miscut. The dislocation dis- tribution and tilts of the epilayers were examined using x-ray rocking curve and （004） reciprocal space maps （RSM） along two orthogonal （110） directions. The results suggested that such reverse-graded layers have different effects on a and 13 dislocations. A higher dislocation density was observed along the [ 110] direction and an epilayer tilt of - 1.43° was attained in the [1-10] direction when a reverse-graded layer strategy was employed. However, for conventional step-graded samples, the dislocation density is normally higher along the [1-10] direction.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51337002,51077028,51502063 and 51307046the Foundation of Harbin Science and Technology Bureau of Heilongjiang Province under Grant No RC2014QN017034
文摘The distributions of traps and electron density in the interfaces between polyimide （PI） matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering （SAXS） tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.
文摘Resonance lines are extensively used to diagnose electronic temperature Te and ions distribution. However, the analysis of the x-ray spectroscopy emitted from plasmas produced by a ns laser Jsually needs the help of a code or some assumptions. In this paper, a diagnostic idea of using line-pairs emitted from a doubly-excited state is proposed. By using the method presented in this paper, Te and the fractional population ratio of bare nuclei and H-like ions are directly obtained from the emission intensity ratios.
基金Project (50474087) supported by the National Natural Science Foundation of China
文摘Hypereutectic Al-Si alloy tubes were produced by centrifugal casting process using an electromagnetic field (EMF). A gradient distribution of the primary Si particles was formed along the tube thickness direction. In the absence of EMF the primary Si moves to inner periphery with increasing rotation speed. The distribution of primary Si can be controlled by the EMF. With increasing electromagnetic field intensity, the primary Si moves from the inner periphery to the outer periphery of the tubes. Most of the primary Si can be driven to the outer if the electromagnetic field intensity is increased to a certain value. It is found that the particle distribution and local volume fraction vary with both the rotation speed and the electromagnetic field intensity.
