44%of steep slope cropland in Europe vulnerable to drought

Steep-slope cropland plays a vital role in food production,economic development,ecosystem diversity,and Eu-ropean cultural heritage.However,these systems are susceptible to extreme weather events.The 2022 summer drought significantly impacted European agriculture,but the specific effects on steep-slope crops remain uncer-tain.Clarifying this is essential for comprehending similar future events and for implementing effective water management strategies to ensure the sustainability of steep-slope agriculture and associated ecosystem services.This study quantitatively analyzes the spatial distribution of twelve major European steep-slope(>12%)crops and assesses agricultural drought severity during the 2022 events using open-access spatial data.The satellite-based Vegetation Health Index(VHI)is utilized to identify critical hotspots.Results show that olive grove is the most widespread crop in steep slope agriculture(34%of total area),followed by wheat(24%),maize(16%),and vineyard(11%).Almost half of the steep-slope agriculture in Europe suffered drought during summer 2022.Vineyards were hardest affected at 79%,primarily in northern Portugal,northern Spain,southern France,and central Italy.Sunflowers followed at 62%,mainly in Spain,central Italy,southern France,and northern Roma-nia.Olive groves ranked third at 59%,with the most impact in northern Portugal,southern and central Spain,and southern Italy.Maize was also significantly affected at 54%.In this paper,we therefore highlight the need to increase steep-slope agriculture resilience by improving water management and promoting sustainable land practices.

Exploring mechanism of hidden,steep obliquely inclined bedding landslides using a 3DEC model:A case study of the Shanyang landslide in Shaanxi Province,China

Catastrophic geological disasters frequently occur on slopes with obliquely inclined bedding structures(also referred to as obliquely inclined bedding slopes),where the apparent dip sliding is not readily visible.This phenomenon has become a focal point in landslide research.Yet,there is a lack of studies on the failure modes and mechanisms of hidden,steep obliquely inclined bedding slopes.This study investigated the Shanyang landslide in Shaanxi Province,China.Using field investigations,laboratory tests of geotechnical parameters,and the 3DEC software,this study developed a numerical model of the landslide to analyze the failure process of such slopes.The findings indicate that the Shanyang landslide primarily crept along a weak interlayer under the action of gravity.The landslide,initially following a dip angle with the support of a stable inclined rock mass,shifted direction under the influence of argillization in the weak interlayer,moving towards the apparent dip angle.The slide resistance effect of the karstic dissolution zone was increasingly significant during this process,with lateral friction being the primary resistance force.A reduction in the lateral friction due to karstic dissolution made the apparent dip sliding characteristics of the Shanyang landslide more pronounced.Notably,deformations such as bending and uplift at the slope’s foot suggest that the main slide resistance shifts from lateral friction within the karstic dissolution zone to the slope foot’s resistance force,leading to the eventual buckling failure of the landslide.This study unveils a novel failure mode of apparent dip creep-buckling in the Shanyang landslide,highlighting the critical role of lateral friction from the karstic dissolution zone in its failure mechanism.These insights offer a valuable reference for mitigating risks and preventing disasters related to obliquely inclined bedding landslides.

Quantitative analysis of biotechnical reinforcement for a steep slope consisting of composite coal-gangue-soil medium adjacent to a mined-out area

The engineering and geological characteristics of a steep slope consisting of coal gangue, rock and soil medium in Huating coal mine have been comprehensively investigated. Owing to humid weather, heavy rainfall, vegetation and porous characteristics of the soil and rock mass, the steep slope will be destabilized and induce mud-rock flow or derive hazard easily. Firstly, based on the classical slope reinforcement theory, some regularity between the shear and displacement in the destabilized zone of the slope with or without root strength contribution is presented. Then, based on the experimental and statistical analysis of root strength, hydrological characteristics and stability status, etc., some possible biotechnical techniques for reinforcement of the steep slope have been suggested. These methods are important for quantitative analysis of destabilization of the slope and design of the biotechnical reinforcement.

Deformation and failure of a high-steep slope induced by multi-layer coal mining

During underground mining,accurate revelation on the deformation and failure mechanisms of a high-steep slope under multi-layer mining conditions facilitates the prevention and control of geological disasters in mines.Numerical simulation based on discrete element theory can be used to explore the characteristics and mechanism of action of deformation and failure of a slope under complex geological and multi-layer mining conditions.By utilising PFC2 D(particle flow code) software,the deformation and failure characteristics of a high-steep slope in Faer Coal Mine in Guizhou Province,China were investigated.Additionally,the mechanism of influence of different numbers of mining layers on the deformation and failure of the high and steep slope was elucidated.The result showed that after the goaf passed by the slope toe,multi-layer mining aggravated the subsidence and deformation of the slope toe:the slope toppled forward as it sank.The toppling of the slope changed the slope structures:the strata in the front of the slope were transformed from anti-dip to down-dip features.Extruded by collapsedtoppled rock mass,the slope toe and the rock mass located in the lower part of the slope toe generally exhibited a locking effect on the slope.Multi-layer mining degraded the overall stability of the slope,in that the total displacement of the slope was much greater than the total mining thickness of the coal seams.Based on the aforementioned research,ideas for preventing and controlling geological disasters during mining operations under a high-steep slope were proposed.

Kinematic analysis of geosynthetics-reinforced steep slopes with curved sloping surfaces and under earthquake regions

A procedure of kinematic analysis is presented in this study to assess the reinforcement force of geosynthetics required under seismic loadings, particularly for steep slopes which are hardly able to maintain its stability. Note that curved sloping surfaces widely exist in natural slopes, but existing literatures were mainly focusing on a planar surface in theoretical derivation, due to complicated calculations. Moreover, the non-uniform soil properties cannot be accounted for in conventional upper bound analysis. Pseudo-dynamic approach is used to represent horizontal and vertical accelerations which vary with time and space. In an effort to resolve the above problems, the discretization technique is developed to generate a discretized failure mechanism, decomposing the whole failure block into various components. An elementary analysis permits calculations of rates of work done by external and internal forces. Finally, the upper bound solution of the required reinforcement force is formulated based on the work rate-based balance equation. A parametric study is carried out to give insights on the implication of influential factors on the performance of geosynthetic-reinforced steep slopes.

Finite element analysis of steep excavation slope failure by CFS theory

The distribution of Coulomb failure stress （CFS） change in the steep excavation slope is calculated by finite element method in this paper, and the failure mechanics under different conditions have been investigated. Comparing the CFSs before and after the slope excavation （stress loading and unloading processes）, the dangerous internal zone and the most likely failure external area are attained. Given the shear cracks on the top surface while tensile stress or cracks along the toe of the slope, we analyze the high cutting-angle steep slope in Kaixian county of the Three Gorges Reservoir region. We bring forward that the peak value of CFS after excavation can reach to the order of 0.1 MPa, which is greatly higher than that of before. Our preliminary results are useful for optimizing the reinforcement structure during the steep slope stabilization engineering.

Sensitivity analysis for parameters of a monitoring system for steep slopes of open-pit mines

Monitoring the stability of steep slopes of open-pit mines is a major issue relating to production safety in mines.In order to determine the technical parameters of a new type of supervising system applied in monitoring steep slopes of open-pit mines,the MSARMA method was used to establish analytical models for the monitoring system,given various parameter settings based on the description of mechanical monitoring principles.We used this sensitivity analysis to conclude that the setting of the most sensitive location of a mechanical monitoring system should be within a range of 1/5～1/2 of the lower part in a vertical direction of steep slopes,with a rational and feasible range of the dip angle setting between 0°～20°.Given the analytical results of our on-site experiments,we have shown that the parameters determined reflect the stability of steep slopes accurately and effectively.These conclusions provide a basis for the application of a new type of steep slope stability monitoring technology in open-pit mines.

Study on high and steep slope stability of surface mine based on RFPA-SRM

The instability and failure mechanism of high and steep slopes in surface mines, and the basis for some reasonable landslide prevention measures were provided using the RFPA-SRM. Based on the actual progress of the Pingzhuang Western Surface Mine and based on strength reduction method, the dynamic instability processes of the top high and steep slope was simulated. Also, the landslide mode was determined, the characteristics of the displacement distribution, the deformation, failure, and the stress distribution in the slope were demonstrated, and the stability was calculated. Conclusions can be drawn as follows： the landslide or failure of high and steep slopes on a surface mine is a gradual process, in which the slope undergoes the generation, expansion, and connection of the fractures and the displacement increases until landslide occurs; a small portion of the upper rocks fail due to the tension and the lower rocks fail due to the shear; the potential sliding surface is combined and the essential cause of the landslide is the shear stress concentration.

Research on Deformation and Force of Bridge Pile Foundation on High and Steep Slope in Mountainous Area

With the rapid development of my country’s economy, the demand for infrastructure construction is also increasing. However, in most areas of China, the terrains are mountainous and hilly. Some projects have to be built on steep slopes. Choosing viaducts or half-bridges on high-steep slopes is not only conducive to the protection of the surrounding environment, but also conducive to the stability of the slope. Bridges usually choose the form of pile foundation-high pier bridge. This paper uses numerical simulation to study and analyze the bridge pile foundation of the slope section. Relying on actual engineering, use the finite element software ABAQUS6.14 to establish a three-dimensional finite element model to study the bearing mechanism and mechanical characteristics of the pile foundation under vertical load, horizontal load and inclined load, discuss the influence of the nature of the soil around the pile and the stiffness of the pile body on the deformation and internal force of the bridge pile foundation in the slope section. The analysis results show that the horizontal load has a great influence on the horizontal displacement of the pile, but has a small influence on the vertical displacement, and the vertical load is just the opposite. Inclined load has obvious “p-Δ” effect. The increase in soil elastic modulus and pile stiffness will reduce the displacement of the pile foundation, but after reaching a certain range, the displacement of the pile foundation will tend to be stable. Therefore, in actual engineering, if the displacement of the pile foundation fails to meet the requirements, the hardness of the soil and the stiffness of the pile can be appropriately increased, but not blindly.

Finite element analysis of displacements of double pile-column bridge piers at steep slope

In order to study bearing characteristics of bridge pile at steep slope under complex loads in mountians, according to double pile-column bridge piers engineering at steep slope and test models in laboratory, finite element analysis of pile-column bridge piers was carried out using software ADINA under different loadings, such as horizontal loading in the longitudinal direction along bridge, vertical loadings, slope top loadings and complex loadings. The numerical simulation results show that displacements of front pile pier top and back pile pier top are different under horizontal loadings in the longitudinal direction along bridge or vertical loadings, the displacements of front pile pier top are higher than those of back pile pier top, and its difference increases with the increase of loadings. Vertical displacements will also appear under slope top loadings, and displacements of front pier top are higher than those of back pier top too, while its difference reduces with the increase of loadings. Displacements of both front pile pier top and back pile pier top under comlex loading are larger than those under single loading.

Liquid-plastic Limit of Surface Sediments in North Slope of South China Sea

1 Introduction China has a vast area of continental shelf and is very rich in marine resources,but because of the complex geological environment and frequent geological disasters,the utilization of marine resources and the construction of marine engineering are limited(Zhu et al.,2016).As the

Surface Sediment Density and Moisture Content in North slope of South China Sea

Marine engineering geology is mainly based on the actual project to study the seabed.This provides a variety of engineering geological parameters for the development of marine engineering(Zhu et al.,2016).This is an early

Analysis on Variations of the Temperature and Precipitation in North Slope Area of the Western Tianshan in Recent 50 Years

[Objective] The research aimed to analyze variation characteristics of the temperature and precipitation in north slope area of the Western Tianshan in recent 50 years.[Method] According to temperature and rainfall data from 1961 to 2010 at three meteorological stations in north slope area of the Western Tianshan,climate change in the zone in recent 50 years was analyzed by using linear trend analysis method and 5-year sliding average method.[Result] The temperature in north slope area of the Western Tianshan showed significant warming trend.The annual average temperature significantly increased at 0.3 ℃/10 a in recent 50 years.But rise rates of the temperature in different seasons were different:autumn> winter> spring> summer.The annual rainfall in north slope area of the Western Tianshan in recent 50 years overall presented relative increase trend.Seen from annual rainfall,it significantly increased at 16.9 mm/10 a.Seen from seasonal rainfall,except in autumn,rainfalls in other three seasons in the past 50 years all showed significant increase trends,with amplitude of 3.2-11.2 mm/10 a.The largest increase amplitude was in summer.After a small precipitation peak in the 1980s,autumn rainfall slightly declined in the past 20 years.[Conclusion] The climate in north slope area of the Western Tianshan become warm and wet.

A gravity similitude model for studying steep rock slopes

A method of a large experimental model coupled with a smaller one and an equivalent replacement method are adopted to study the deformation and the failure mechanism of a steep rock slope, in order to solve the difficult problems in space gravity similitude of the experimental model on steep rock slope with weak layers. The experimental results on the Lianziya Precipice of the Yangtze Three Gorges are in general agreement with the field observations. The experimental method adopted is proved to be successful in molding the complex geological condition especially with the weak layers.

Slope runoff study in situ using rainfall simulator in mountainous area of North China

Simulated rainfall is a valid tool to examine the runoff generation on the slope.13 simulated rainfall experiments with different rainfall intensities and durations are completed in a 5 m ×10 m experimental plot in mountainous area of North China.Simultaneously,rainfall,surface runoff,soil-layer flow,mantel-layer flow and soil moisture are monitored respectively.From the results,it is found that the hydrographs in all layers have the characteristics of rapid rise and fall.The recessions of surface flow and soil-layer flow are much faster than that of mantel-layer flow.Surface flow,the main contributor,makes up more than 60% of the total runoff in the study area.It even exceeds 90% in the cases of high intensity rainfall events.Runoff coefficient(ratio of total runoff to rainfall amount) is mainly influenced by rainfall amount,rainfall intensity and antecedent soil moisture,and the relationship can be well expressed by a multiple linear regression function α = 0.002P + 0.182i + 4.88Wa-0.821.The relation between the rainfall intensity and the lag time of three flows(surface runoff,soil-layer flow and mantel-layer flow) is shown to be exponential.Then,the result also shows that the recession constant is 0.75 for surface runoff,is 0.94 for soil-layer and mantel-layer flow in this area.In this study area,the dominant infiltration excess runoff is simulated by Horton model.About 0.10 mm/min percolation is observed under the condition of different rainfall intensities,therefore the value is regarded as the steady infiltration rate of the study area.

Stability analysis of new safety cleaning bank in steep slope mining

Based on the study of the slope with gently granular structure in Xingqiao open mine, a new safety cleaning bank mode for steep slope mining was developed, including setting up dint cut, and forming natural retaining wall based on the character of gentle incline slope. It can effectively eliminate the impact of sliding body on the bottom working place and slope body, reduce the dilution of ore, keep rainwater from upper steps away, decrease influence of the weak intermediate layer, and cut cost of disposal waste rock. The safety and reliability of the mode were analyzed and verified from 3 aspects: static load calculation, ANSYS simulation of dynamic loading and spot experiment. The result of static loading calculation shows that the retaining wall can support accumulation and extrusion of granular body, and the glide or overturn disaster will not take place. The simulations of dynamic loading show that the retaining wall remains stable until sliding body collapses from 360 m (10 sublevels). Only one new safety cleaning bank in each 15 sublevels can fully meet the need of engineering. The new mode sustains steep slope (mining,) increases the angle of ultimate slope, and reduces invalid overburden amount of rock by 3%5%. The result of spot experiment has verified the exactness of the above calculations and simulations.

Sustainable water resource management in steep-slope agriculture

Steep-slope agricultural landscapes are under threat due to climate change.On the one hand,the growing fre-quency of extreme high-intensity rainfall events concentrated in both temporal and spatial scales are causing flash floods or slope failure risk scenarios.On the other hand,future climate projections indicate a significant expansion of arid zones in the steep slope agricultural system.There is evidence that these landscapes face a high risk of growing water scarcity.Considering their unique role in crop production,ecosystem diversity,and crop production,ecosystem diversity,and cultural heritage,understanding sustainable water resource manage-ment for mitigating climate change-induced drought has never been more urgent than today.In these landscapes,unique indigenous knowledge of water conservation is adopted to manage water resources improving their re-silience optimally.It is,therefore,necessary to promote water storage to mitigate floods or increase the resilience to prolonged drought(creating at the same time favourable conditions for biodiversity).Modern technological advances(e.g.,high-resolution remote sensing and GIS-based modelling)are crucial in supporting these activities and understanding earth’s surface processes.

Research on Effect of Heap Loading on Deformation and Mechanical Properties of Bridge Double Pile Foundation on Steep Slope

In order to analyze the deformation and stress characteristics of the pile foundation on the slope, this paper uses the finite element software Abaqus for numerical simulation. The displacement and stress data of pile under different working conditions (the combination of heap load and vertical load and horizontal load and inclined load) were collected;the distribution of pile displacement, axial force and bending moment were analyzed. Simulation results show that: slope top loading has little effect on vertical displacement; when the heap load exceeds 200 kPa, the horizontal displacement is greatly affected. Pile axial force decreases with pile burial depth;pile lateral resistance plays a more adequate role in the rock and soil layer. The bending moment of double pile foundation is positive at the top and negative at the bottom. Applied oblique load has obvious p-Δ effect.

Characteristics, Fertility Status and Fertility Capability Classification of Steep Slope Soils of the Dschang Cliff (Cameroon Western Highlands)

Mountainous ecosystem soils are subject to colonization nowadays for agricultural purposes due to an increasing population in towns making the detailed characterization of such soils indispensable. This work aims to characterize the steep slopes soils of the Dschang hills and to evaluate their fertility level for agricultural valorization. Thus, four soil profiles were dug at various topographic positions (summit (SP), shoulder (MP), backslope (BP) and footslope (PP)) following a toposequence. Samples of disturbed and undisturbed soils were taken and analyzed in the laboratory according to standard methods. The Fertility Capability Classification (FCC) and simple limitation methods were used to identify major agricultural constraints. The main results show that profiles thickness is moderate, between 0 and 120 cm, with a high sand content (at least 50%) over the entire toposequence, especially at the surface. The study site has four types of soils, namely Eutric Cambisols (ochric) in SP and Leptic Eutric Cambisols (Humic) in MP, Eutric Cambisols (Humic) in BP and Stagnic Oxygleyic Dystric Gleysols (Humic) in pp. The soils are very acidic at PP, moderately acidic at BP and SP and slightly acidic at MP. Organic matter is higher at the surface than at depth at the topographic segments of MP, BP and PP and low to SP. The C/N ratio is high (>17) in all profiles except P4 (<10). In addition, the cation exchange capacity (CEC), the sum of exchangeable bases, total nitrogen and available phosphorus is low in all profiles. The Ca/ Mg/K balance in all the profiles shows a cation imbalance and a relatively high concentration of exchangeable potassium compared to the ideal situation (76% Ca, 18% Mg and 6% K). The major constraints to crop production are: aluminum toxicity (a) and nutrients leaching (e), textural discontinuity (LS), flooding (g), low nutrient reserve (k), sand (S), clay (C) and slope (t). Hence the fertility capacity classes of these soils are CCaegk (PP), SSek (BP), SSte (MP) and LSaek (SP). To improve the yield, it will require off-season crop cultivation, fertilization and liming, and earthworks.

石灰石露天矿高陡边坡稳定性计算分析

以西南某石灰石矿高陡边坡为研究对象,根据矿山边坡现状、边坡岩体结构和结构面发育特征因素对“现状边坡”和“终了边坡”进行地质分区,通过岩石室内物理力学试验获得坡体岩石物理力学参数,采用GSI法计算边坡岩体内摩擦角、粘聚力、变形模量和泊松比等参数,评估边坡地质强度特性,采用Morgenstern-Price极限平衡法分三种荷载工况分别计算“现状边坡”和“终了边坡”各分区稳定性系数。经分析,该石灰石矿各地质分区“现状边坡”和“终了边坡”稳定性好,采场边坡参数设计合理,可为矿山扩产安全设施设计和安全生产提供参考。