Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface

In order to study the problems of unreasonable airflow distribution and serious dust pollution in a heading surface,an experimental platform for forced ventilation and dust removal was built based on the similar principles.Through the similar experiment and numerical simulation,the distribution of airflow field in the roadway and the spatial and temporal evolution of dust pollution under the conditions of forced ventilation were determined.The airflow field in the roadway can be divided into three zones:jet zone,vortex zone and reflux zone.The dust concentration gradually decreases from the head to the rear of the roadway.Under the forced ventilation conditions,there is a unilateral accumulation of dust,with higher dust concentrations away from the ducts.The position of the equipment has an interception effect on the dust.The maximum error between the test value and the simulation result is 12.9%,which verifies the accuracy of the experimental results.The research results can provide theoretical guidance for the application of dust removal technology in coal mine.

Optimization method of fracturing fluid volume intensity for SRV fracturing technique in shale oil reservoir based on forced imbibition:A case study of well X-1 in Biyang Sag of Nanxiang Basin,China

An optimization method of fracturing fluid volume strength was introduced taking well X-1 in Biyang Sag of Nanxiang Basin as an example.The characteristic curves of capillary pressure and relative permeability were obtained from history matching between forced imbibition experimental data and core-scale reservoir simulation results and taken into a large scale reservoir model to mimic the forced imbibition behavior during the well shut-in period after fracturing.The optimization of the stimulated reservoir volume(SRV)fracturing fluid volume strength should meet the requirements of estimated ultimate recovery(EUR),increased oil recovery by forced imbibition and enhancement of formation pressure and the fluid volume strength of fracturing fluid should be controlled around a critical value to avoid either insufficiency of imbibition displacement caused by insufficient fluid amount or increase of costs and potential formation damage caused by excessive fluid amount.Reservoir simulation results showed that SRV fracturing fluid volume strength positively correlated with single-well EUR and an optimal fluid volume strength existed,above which the single-well EUR increase rate kept decreasing.An optimized increase of SRV fracturing fluid volume and shut-in time would effectively increase the formation pressure and enhance well production.Field test results of well X-1 proved the practicality of established optimization method of SRV fracturing fluid volume strength on significant enhancement of shale oil well production.

Transfer matrix method for free and forced vibrations of multi-level functionally graded material stepped beams with different boundary conditions

Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore the dynamic behaviors of an FGM stepped beam with different boundary conditions based on an efficient solving method.Under the assumptions of the Euler-Bernoulli beam theory,the governing differential equations of an individual FGM beam are derived with Hamilton’s principle and decoupled via the separation-of-variable approach.Then,the free and forced vibrations of the FGM stepped beam are solved with the transfer matrix method(TMM).Two models,i.e.,a three-level FGM stepped beam and a five-level FGM stepped beam,are considered,and their natural frequencies and mode shapes are presented.To demonstrate the validity of the method in this paper,the simulation results by ABAQUS are also given.On this basis,the detailed parametric analyses on the frequencies and dynamic responses of the three-level FGM stepped beam are carried out.The results show the accuracy and efficiency of the TMM.

Numerical Predictions of Laminar Forced Convection Heat Transfer with and without Buoyancy Effects from an Isothermal Horizontal Flat Plate to Supercritical Nitrogen

Numerical predictions are made for Laminar Forced convection heat transfer with and without buoyancy effects for Supercritical Nitrogen flowing over an isothermal horizontal flat plate with a heated surface facing downwards.Computations are performed by varying the value ofΔT from5 to 30 K and P_(∞)/P_(cr)ratio from1.1 to 1.5.Variation of all the thermophysical properties of supercritical Nitrogen is considered.The wall temperatures are chosen in such a way that two values of Tw are less than T∗(T*is the temperature at which the fluid has a maximum value of Cp for the given pressure),one value equal to T∗and two values greater than T∗.Three different values of U∞are used to obtain Re∞range of 3.6×10_(4)to 4.74×10^(5)for forced convection without buoyancy effects and Gr_(∞)/Re^(2)_(∞)range of 0.011 to 3.107 for the case where buoyancy effects are predominant.Six different forms of correlations are proposed based on numerical predictions and are compared with actual numerical predictions.It has been found that in all six forms of correlations,the maximum deviations are found to occur in those cases where the pseudocritical temperature TT∗lies between the wall temperature and bulk fluid temperature.

Exact Solutions of Forced Schrödinger Equation and How to Choose the External Forces

Schrödinger equations are very common equations in physics and mathematics for nonlinear physics to model the dynamics of wave propagation in waveguides such as power lines, atomic chains, optical fibers, and even in quantum mechanics. But all these equations are most often studied without worrying about what would happen if this equation were maintained, that is to say, had a second member synonymous with an external force. It is true that on a physical level, such equations can be considered as describing the generation of waves on a waveguide using an external force. However, the in-depth analysis of this aspect is not at the center of our reflection in this article, but for us, it is a question of proposing exact solutions to this type of equation and above all proposing the general form of the external force so that the obtaining exact solutions is possible.

Propagation Dynamics of Forced Pulsating Waves for a Time Periodic Lotka-Volterra Cooperative System with Nonlocal Effects in Shifting Habitats

In this paper, we will concern the existence, asymptotic behaviors and stability of forced pulsating waves for a Lotka-Volterra cooperative system with nonlocal effects under shifting habitats. By using the alternatively-coupling upper-lower solution method, we establish the existence of forced pulsating waves, as long as the shifting speed falls in a finite interval where the endpoints are obtained from KPP-Fisher speeds. The asymptotic behaviors of the forced pulsating waves are derived. Finally, with proper initial, the stability of the forced pulsating waves is studied by the squeezing technique based on the comparison principle.

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

Forced convection rheoforming process for preparation of 7075 aluminum alloy semisolid slurry and its numerical simulation

A self-developed forced convection rheoforming （FCR） machine for the preparation of light alloy semisolid slurry was introduced. The microstructure characteristics of 7075 aluminium alloy semisolid slurry at different stirring speeds prepared by the FCR process were analyzed. The experimental results suggest that with the increase of the stirring speed, the mean grain size of the semisolid decreases and the shape factor as well as the number of primary grains increase. Meanwhile, the preparation process of semisolid slurry was numerically simulated. The flow characteristics of the melt in the device and the effect of the stirring speed on temperature field and solid fraction of the melt were investigated. The simulated results show that during the preparation process of semisolid slurry, there is a complex convection within the FCR device that obviously changes the temperature field distribution and solid fraction of the melt. When the convection intensity increases, the scope of the undercooling gradient of the melt is reduced and temperature distribution is improved.

Effect of forced lamina flow on microsegregation simulated by phase field method quantitatively

The influence of supercooled melt forced lamina flow on microsegregation was investigated. The concentration distribution at solid-liquid boundary of binary alloy Ni-Cu was simulated using phase field model coupled with flow field. The microsegregation, concentration maximum value, boundary thickness of concentration near upstream dendrite and normal to flow dendrite, and downstream dendrite were studied quantitatively in the case of forced lamia flow. The simulation results show that solute field and flow field interact complexly. Compared with melt without flow, in front of upstream dendrite tip, the concentration boundary thickness is the lowest and the concentration maximum value is the smallest for melt with flow. However, in front of downstream dendrite tip, the results are just the opposite. The zone of poor Cu in upstream dendrite where is the most severely microsegregation and shrinkage cavity is wider and the concentration is lower for melt with flow than that without flow.

Phase-field modeling of dendritic growth under forced flow based on adaptive finite element method

A mathematical model combined projection algorithm with phase-field method was applied. The adaptive finite element method was adopted to solve the model based on the non-uniform grid, and the behavior of dendritic growth was simulated from undercooled nickel melt under the forced flow. The simulation results show that the asymmetry behavior of the dendritic growth is caused by the forced flow. When the flow velocity is less than the critical value, the asymmetry of dendrite is little influenced by the forced flow. Once the flow velocity reaches or exceeds the critical value, the controlling factor of dendrite growth gradually changes from thermal diffusion to convection. With the increase of the flow velocity, the deflection angle towards upstream direction of the primary dendrite stem becomes larger. The effect of the dendrite growth on the flow field of the melt is apparent. With the increase of the dendrite size, the vortex is present in the downstream regions, and the vortex region is gradually enlarged. Dendrite tips appear to remelt. In addition, the adaptive finite element method can reduce CPU running time by one order of magnitude compared with uniform grid method, and the speed-up ratio is proportional to the size of computational domain.

Forced Convection Boiling Heat Transfer and Dryout Characteristics in Helical Coiled Tubes with Various Axial Angles

对水和水蒸汽汽液两相流体在螺旋轴呈各种倾角放置的螺旋管内强制对流沸腾传热与烧毁特性进行了系统地试验研究，试验中系统及结构参数范围如下：压力：Ｐ＝０．４～３．０ＭＰａ质量流速：Ｇ＝１００～２４００ｋｇ／ｍ２·ｓ进口水温：Ｔ＝３０～８０℃出口干度：ｘ＝－０．０５～１．２管内壁面热负荷：ｑ＝０～５４０ｋＥ／ｍ２试验段结构参数：总长Ｌ＝６４４８ｍｍ，管内径ｄ＝１１ｍｍ，螺旋直径Ｄ＝２５６ｍｍ，螺旋升角β＝４．２７°螺旋管轴向放置倾角：水平位置（０°）、向上倾斜４５°（＋４５°）、垂直向上（＋９０°）、向下倾斜４５°（－４５°）．共进行了１０５０个工况的试验．试验结果表明，螺旋管内汽液两相流强制对流沸腾传热可以划分为核态沸腾区、两相流强制对流区、烧毁及烧毁后传热区等３种区域．通过数据处理和分析总结，给出了３区域间转变的边界方程，和３个区域内两相流传热系数的计算公式．根据试验观察和数据结果，对烧毁现象及烧毁点或区域发生的条件及机理进行了深入的分析研究，发现一系列有关现象的规律和特点，指出了其主要影响因素，并给出了烧毁点临界质量干度的预报公式．

A Comparison between Numerical Simulations of Forced Local Hadley (Anti-Hadley) Circulation in East Asian and Indian Monsoon Regions

Two numerical simulations of forced local Hadley circulation are carried out based on a linear diagnostic equation to provide an insight into the mechanisms of monsoon evolution in different monsoon regions. One simulation is for the zonal mean Hadley circulation over East Asia (from 95°E to 122.5°E), another over India (from 70°E to 85°E). With the NCEP/ NCAR re-analysis data re—processed by Chinese Academy of Science in Beijing, the former simulation displays a dominant anti—Hadley circulation pattern over East Asia at 1200 UTC May 1, 1994. The simulated circulation pattern is consistent well enough with the circulation pattern plotted directly from the data for lack of the radiation information at each level. Although the simulation over India is not as good as that over East Asia, a dominant Hadley circulation pattern is obvious as data show. Further analysis shows that the defective simulation over India is due to the presence of statically unstable condition at some grid points in the lower troposphere. This circumstance slightly violates the hydrodynamic stability criterion required by the elliptic diagnostic equation for the forced circulation. Since the simulations are reliable enough compared with the given data, the linear equation facilitates a systematic assessment of relative importance of each internally forcing process. The assessment shows that among the internal processes, the horizontal temperature advections account obviously for the Hadley (anti—Hadley) circulation over India (East Asia) at 1200 UTC May 1, 1994 in addition to the process associated with the latent heat releasing. The calculation of latent heat energy is a little bit unreliable due to the unclear cloud physics in the convection processes and the less accurate humidity data. These preliminary results are consistent with the results of previous studies which show that the feature of the seasonal warming in the upper troposphere and the corresponding processes are part of key processes closely related to the evolution of the summer monsoon over East Asia and India. Key words Monsoon circulation - Hadley circulation - Forced meridional circulation This work was supported by the “ National key programme of China for developing basic science” G 1998040900 part 1, NSFC 49675264 and NSFC 49875021.

Development of forced degradation and stability indicating studies of drugs——A review

Forced degradation is a degradation of new drug substance and drug product at conditions more severe than accelerated conditions. It is required to demonstrate specificity of stability indicating methods and also provides an insight into degradation pathways and degradation products of the drug substance and helps in elucidation of the structure of the degradation products. Forced degradation studies show the chemical behavior of the molecule which in turn helps in the development of formulation and package. In addition, the regulatory guidance is very general and does not explain about the performance of forced degradation studies. Thus, this review discusses the current trends in performance of forced degradation studies by providing a strategy for conducting studies on degradation mechanisms and also describes the analytical methods helpful for development of stability indicating method.

NON-LINEAR FORCED VIBRATION OF AXIALLY MOVING VISCOELASTIC BEAMS

The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is derived from the dynamical, constitutive equations and geometrical relations. By referring to the quasi-static stretch assumption, the partial-differential non-linearity is reduced to an integro-partial-differential one. The method of multiple scales is directly applied to the governing equations with the two types of non-linearity, respectively. The amplitude of near- and exact-resonant steady state is analyzed by use of the solvability condition of eliminating secular terms. Numerical results are presented to show the contributions of foundation vibration amplitude, viscoelastic damping, and nonlinearity to the response amplitude for the first and the second mode.

NUMERICAL SIMULATION OF SUCCINONITRITE DENDRITIC GROWTH IN A FORCED FLOW

Numerical simulation based on phase field method is performed to describe solidification process of pure material in a free or forced flow. The evolution of the interface is showed, and the effects of mesh grid and flow velocity on succinonitrite shape are studied. These results indicate that crystal grows into an equiaxial dendrite in a free flow and into an asymmetrical dendritic in a forced flow. With increasing flow velocity, the upstream dendritic arm tip grows faster and the downstream arm grows slower. However, the evolution of the perpendicular tip has no significant change. In addition, mesh grid has no influence on dendritic growth shape when mesh grid is above 300×300.

An experimental study:Integration device of Fiber Bragg grating and reinforced concrete beam for measuring debris flow impact force

The impact effect of boulder within debris flow is the key factor contributing to peak impact as well as to the failure of debris flow control work. So accurate measuring and calculating the impact force of debris flow can ensure the engineering design strength. However, limited to the existing laboratory conditions and piezoelectric sensor performance, it is impossible, based on the conventional measurements, to devise a computing method for expressing a reliable boulder impact force. This paper has therefore designed a new measurement device according to the method of integrating Fiber Bragg grating(FBG) and reinforced concrete composite beam(RCB) for measuring the impact force of debris flows, i.e. mounting FBG on the axially stressed steel bar in the composite beam at regular intervals to monitor the steel strain. RCB plays the role of contacting debris flow and protecting FBG sensors. Taking this new device as the experimental object, drop testing is designed for simulating and reflecting the boulder impact force. In a series of impacting tests, the relationship between the peak dynamic strain value of the steel bar and the impact force is analyzed, and based on which, an inversion model that uses the steel bar strain as the independent variable is established for calculating the boulder impact force.The experimental results show that this new inversion model can determine the impact force value and its acting position with a system error of 18.1%, which can provide an experimental foundation for measuring the impact force of boulders within the debris flow by the new FBG-based device.

Single-Phase Forced Convection Heat Transfer in Micro Rectangular Channels

Increase in the integration and package density of aviation electronic equipment provides severe challenge to heat control for electronic components, yet the microchannel radiator offers an efficient method for solving the problem of cooling electronic chips and devices. In this paper, 6 micro rectangle channels with different sizes were designed and fabricated; the experiment of single\|phase forced convection heat transfer was conducted with solution of CH\-5OH, the most commonly used coolant for aviation electronic equipment, flowing through those microchannels. The influences of liquid velocity, degree of coolant supercooling, and configuration of microchannels on the heat transfer characteristics were analyzed respectively.

In-plane forced vibration of curved pipe conveying fluid by Green function method

The Green function method （GFM） is utilized to analyze the in-plane forced vibration of curved pipe conveying fluid, where the randomicity and distribution of the external excitation and the added mass and damping ratio are considered. The Laplace transform is used, and the Green functions with various boundary conditions are obtained subsequently. Numerical calculations are performed to validate the present solutions, and the effects of some key parameters on both tangential and radial displacements are further investigated. The forced vibration problems with linear and nonlinear motion constraints are also discussed briefly. The method can be radiated to study other forms of forced vibration problems related with pipes or more extensive issues.

Influence of polymer additives on turbulent energy cascading in forced homogeneous isotropic turbulence studied by direct numerical simulations

Direct numerical simulations （DNS） were performed for the forced homogeneous isotropic turbulence （FHIT） with/without polymer additives in order to elaborate the characteristics of the turbulent energy cascading influenced by drag-reducing effects. The finite elastic non-linear extensibility-Peterlin model （FENE-P） was used as the conformation tensor equation for the viscoelastic polymer solution. Detailed analyses of DNS data were carried out in this paper for the turbulence scaling law and the topological dynamics of FHIT as well as the important turbulent parameters, including turbulent kinetic energy spectra, enstrophy and strain, velocity structure function, small-scale intermittency, etc. A natural and straightforward definition for the drag reduction rate was also proposed for the drag-reducing FHIT based on the decrease degree of the turbulent kinetic energy. It was found that the turbulent energy cascading in the FHIT was greatly modified by the drag-reducing polymer additives. The enstrophy and the strain fields in the FH1T of the polymer solution were remarkably weakened as compared with their Newtonian counterparts. The small-scale vortices and the small-scale intermittency were all inhibited by the viscoelastic effects in the FHIT of the polymer solution. However, the scaling law in a fashion of extended self-similarity for the FHIT of the polymer solution, within the presently simulated range of Weissenberg numbers, had no distinct differences compared with that of the Newtonian fluid case.

Track of Grain in Forced Vortex with Horizontal Axis

ＴｒａｃｋｏｆＧｒａｉｎｉｎＦｏｒｃｅｄＶｏｒｔｅｘｗｉｔｈＨｏｒｉｚｏｎｔａｌＡｘｉｓＰｅｎｇＬｏｎｇｓｈｅｎｇ（Ｄｅｐｔ．ｏｆＨｙｄ．Ｅｎｇ．）ＡｂｓｔｒａｃｔＡｍａｔｈｅｍａｔｉｃａｌｍｅｔｈｏｄｔｏｆｉｎｄｔｒａｃｋｏｆｇｒａｉｎｉｎｔｈｅ...