Development of Hexagonal MMR Based UWB Bandpass Filter with 5 GHz Notch Band

This paper presents an experimental verification of ultra-wideband bandpass filter (BPF) for UWB applications and notch filter in order to suppress 5 GHz narrowband service when it coexists with UWB radio system. The BPF consists of a hexagonal shaped multiple mode resonator (MMR) with interdigital coupling at both sides. Notch filter is derived from BPF by introducing four embedded open stubs near by the MMR. The developed BPF has insertion loss of –2 dB and the minimum return loss about –35 dB, while for the notch filter they are –3 dB and –40 dB respectively. The group delay obtained for bandpass filter is below 0.2 ns and for notch filter, it is about 0.3 ns. With the above structural features the overall dimensions of the filter is 38 mm (length) × 3.2 mm (breadth) × 1.6 mm (height) and the percentage fractional bandwidth (FBW) of the proposed filter is about 120.48%.

A Novel Bow-Tie Antenna with Triple Band-Notched Characteristics for UWB Applications

This paper presents the design of a compact bow-tie antenna with triple band notched characteristics for UWB applications. The proposed antenna can operate from 3.1 to 10.6 GHz with VSWR - 8.4 GHz) centered at 8.1 GHz, the CSRR2 rejects the WLAN band (5.15 - 5.85 GHz) centered at 5.6 GHz, and the CSRR3 rejects the band (4.10 - 4.47 GHz) centered at 4.32 GHz. Compared with recent design, this antenna is more compact, and presents better simulation results of its characteristics. Our newly designed antenna is a potential candidate for application in UWB communication systems.

Novel Compact UWB Band Notch Antenna Design for Body-Centric Communications

This research analyzes and implements an innovative and tiny ultrawideband(UWB)antenna with band-notched features for body-centric communication.The shape of the designed antenna looks like a‘swan’with a slotted patch.Computer Simulation Technology(CST)is used to assess and investigate the performance of this antenna.With a band notch,this antenna can prevent interference from Wireless Local Area Network(WLAN)(5.15–5.825 GHz)and Worldwide Interoperability for Microwave Access(WiMAX)(5.25–5.85 GHz)systems.At first,the performance parameters like return loss response,gain,radiation patterns,and radiation efficiency of this UWB antenna are evaluated.After that,the human body effects on the antenna performance of the antenna are also examined to place the antenna at various distances away from 3-layers of phantom body model at different frequencies.All the on-body performance parameter results are compared and analyzed with free space performance parameter results.Lastly,by changing patch slot length and ground plane length,parametric studies were done for performance comparison.According to this research,it is noticed that the antenna is tiny and new.It shows good performance in body case as well.Hence,the antenna is very suitable for healthcare applications.

Miniaturized Novel UWB Band-Notch Textile Antenna for Body Area Networks

This paper presents the design and analysis of a miniaturized and novel wearable ultra-wideband(UWB)band-notch textile antenna for Body Area Networks(BANs).The major goal of building the antenna for wearable applications with band notch in X-band is to reject the downlink band(7.25 to 7.75 GHz)of satellite communication in the UWB frequency ranges of 3.1–10.6 GHz to keep away from interference.Computer Simulation Technology(CST)TM Microwave Studio,which is user-friendly and reliable,was used to model and simulate the antenna.The radiating element of the antenna is designed on Jeans’textile substrate,which has a relative permittivity of 1.7.The thickness of the jeans’fabric substrate has been considered to be 1 mm.Return loss,gain,bandwidth,impedance,radiation,and total efficiency,and radiation patterns are presented and investigated.The antenna is simulated placed on the three layers of the human body model,and the on-body results are summarized in comparison with free space.Results and analysis indicate that this antenna has good band-notch characteristics in the frequency range of 7.25 GHz to 7.75 GHz.The parametric study varying the relative permittivity of Jeans’fabric substrate of this antenna is also evaluated.In addition,effects on the antenna parameters of variation of ground plane size have been reported.The antenna is 25 mm×16 mm×1.07 mm in total volume.Results reveal that this antenna achieves the design goal and performs well both in free space and on the body.

DUAL MODE WIDEBAND BAND-PASS FILTER WITH NOTCHED BAND FOR COMMUNICATION SYSTEM

This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.

Miniaturized Planar Ultra-Wideband Bandpass Filter with Notched Band

This paper presents a planar ultra-wideband (UWB) bandpass filter with sharp out-of-band rejection performance. The filter is formed by a folded multiple-mode resonator to realize high performance in an operation band from 3.3 to 10 GHz with a very compact size of 20 mm × 20 mm × 0.5 mm. An extra notched band centered at 5.8 GHz is further accomplished by etching a Hilbert fractal curve slit on the filter without the necessity of readjusting the geometrical parameters. The simulated and measured results are in good agreement.

Multi-Reconfigurable Band-Notched Coplanar Waveguide-Fed Slot Antenna

This paper proposes an antenna design concept to achieve a multi-reconfigurable band-notch antenna by using a set of microswitches. The proposed idea was proved by the design of the coplanar waveguide(CPW)-fed slot antenna. The sample design gives a wideband antenna the impedance bandwidth of which covers the frequency ranged from 1.9 GHz to 6.55 GHz.The antenna could be configured to work either in single-band mode or in one of the defined dual-band modes.

New band-notched UWB antenna

A simple and compact ultra wideband （UWB） printed monopole antenna with band-notched performance is proposed in this paper. The antenna is partially grounded so that the Q value is depressed and the impedance bandwidth is broadened. A small strip bar is loaded on each arm of the similar U-shaped radiator. The impedance bandwidth of the antenna overlap with IEEE 802.11a is rejected consequently. The geometry parameters of the antenna are investigated and optimized with HFSS. The measured bandwidth of the proposed antenna occupies about 7.89 GHz covering from 3.05 GHz to 10.94 GHz with expected notched band from 4.96 GHz to 5.98 GHz. A quasi-omnidirectional and quasi-symmetrical radiation pattern in the whole band is also obtained. As a result, a UWB wireless communication system can be simplified with the band-notched UWB antenna presented.

A Survey on Recent Approaches in the Design of Band Notching UWB Antennas

According to federal communication commission (FCC) rules, the 3.1 - 10.6 GHz band is allocated to the amateur ultra wideband (UWB) applications. On the other hand, the 5.15 - 5.825 GHz band is associated with the wireless LAN (WLAN) applications according to IEEE 802.11 and HIPERLAN/2 standards. Therefore, an unwanted intrusion will be expected between these two frequency requests. In This paper a comprehensive review will be done over a wide range of UWB microstrip antennas which all have the band notching property over the WLAN band to effectively avoid this interference. All the band notching techniques in the recent papers will be categorized in 4 distinct methods including the tuning stub, the shaped slot, the parasitic element, and the fractal geometry. A few typical papers will be introduced and evaluated in each category for declaration purposes. At last, a comparison will be done between these methods and the relative papers.

Compact Bluetooth/UWB Antenna with Multi-Band Notched Characteristics

A small-sized, low-profile, and planar dual band antenna for Bluetooth (2.4 - 2.484 GHz) and ultra-wideband (UWB) (3.1 - 10.6 GHz) with multi-band notched antennas is presented. Two antennas A and B with different types of slots are used to obtain tri-band notched characteristic. In antenna A notched bands, 5 - 6 GHz for WLAN, and 3.3 - 4 GHz for WiMAX, are achieved using a U-slot in ground structure and in the radiating patch. In antenna B two notched bands at 3.3 - 4 GHz, for WiMAX and 7.2 GHz for C-band satellite communication systems are achieved by using a U-slot in ground structure and a H-shaped slot in the radiating patch. The radiation characteristics of the two antennas are calculated using a commercial EM simulator based on Finite Element Method (FEM) and the Finite Integration Technique (FIT). The two antennas show acceptable gain flatness with stable omnidirectional radiation patterns across the integrated Bluetooth and UWB bands.

Design of Integrated Triple Band Notched for Ultra-Wide Band Microstrip Antenna

Ultra-wideband (UWB) is one of the recent topics that received a great concern from academia and industry. However, UWB found many difficulties to be standardized due to the overlay working that made UWB an important potential interference source to many licensed and unlicensed spectrum throughout the band 3.1 to 10.6 GHz. This paper demonstrates the design of integrated triple band notched for UWB Microstrip antenna. We simulated UWB short range systems which require low power and these are built using inexpensive digital components. We proposed a compact triple band notched CPW (Co-planar Waveguide) fed Micro strip Antenna (MSA) for UWB. This band-notched antenna has rejection characteristics at 3.2 GHz (for Wi-MAX band 3.16 to 3.32 GHz), at 5.5 GHz (for WLAN 2 band—5.3 to 5.72 GHz) and at 7.9 GHz (for ITU band 7.72 GHz to 8.13 GHz). The simulation was done using IE3D simulator.

A U-Shaped UWB Antenna with Band-Notched Performance

An ultra-wideband antenna with controllable band-notched is presented. Two semi-ellipses with different radiuses are subtracted to result in the main patch. By varying inner and outer radiuses, much more enhancement in bandwidth occurred. A U-shaped slot is used to make band-stop performance. Measured S11 is ≤-10 dB over 2.3 - 5 GHz and 6.1 - 15.1 GHz.

Analysis of Rectangular Notch Antenna for Dual-Band Operation

In this paper a design of single layer rectangular notch microstrip antenna for dual-band is proposed and experimentally investigated. This antenna is excited by microstrip line. Direct microstrip coupling with proper matching transformer has been used. Design is made for optimized notch dimension for two resonant frequencies. These resonance frequencies change with the variation in length and width of the notch. The input impedance and VSWR have been measured with the help of Network analyzer. It is found that the input impedance and VSWR depends variation in length and width of the notch microstrip antenna.

Optimization of band-notched UWB antenna using micro-genetic algorithm combined with FDTD

The micro-genetic algorithm (MGA) optimization combined with the finite-difference time-domain (FDTD) method is applied to design a band-notched ultra wide-band (UWB) antenna. A U-type slot on a stepped U-type UWB monopole is used to obtain the band-notched characteristic for 5 GHz wireless local area network (WLAN) band. The measured results show that voltage standing wave ration (VSWR) less than 2 covers 3.1-10.6 GHz operating band and VSWR more than 2 is within 5.150-5.825 GHz notched one with the highest value of 5.6. Agreement among the calculated, HFSS simulated and measured results validates the effiectiveness of this MGA-FDTD method, which is efficient for UWB antennas design.

Design of Reconfigurable Band Notches Antenna for Cognitive Radio Applications

In this paper, an antenna with reconfigurable band notches, for cognitive radio applications, is proposed. The antenna can be operated as ultra wideband, and is reconfigurable in terms of the ability to select a notched band in the SRR resonant frequency. The reconfigurable band notches are induced using a band-stop filter based on split-ring resonators (SRRs), and are controlled using electronic switches mounted over the SRRs. For this sake, the design of the band-stop filter is proposed. A prototype of filter is fabricated and measured. The incorporation of a band-stop filter, into a wideband antenna, is then looked into. The proposed antenna is designed and simulated using Ansoft HFSS. A prototype of the antenna is fabricated and measured. A good analogy between simulated and measured results is obtained.

Triple Notched Band Characteristics UWB Antenna Using C-Shaped Slots and Slot-Type Capacitively-Loaded Loop (CLL)

Ultra wide bands antennas with notched bands characteristics have recently been considered for efficient communication between devices. In this paper, a compact ultra-wideband antenna (UWB) for UWB applications with triple bandnotched characteristics is presented. The proposed antenna consists of a square patch with four truncated corners and a partial ground plane with a rectangular slit. The operation bandwidth of the designed antenna is from 2.66 GHz to more than 13.5 GHz. Band-notched characteristics of antenna to reject the frequency band of 3.18 - 3.59 GHz and 4.70 - 5.88 GHz, is realized by inserting two C-shaped slots in the patch, the third band of 9.54 - 12.22 GHz is achieved by slottype capacitively-loaded loop (CLL) inserted in the patch near the feed line. Details of the proposed antenna design and simulated results are presented and discussed.

Design and Analysis of a Compact Band Notch UWB Antenna for Body Area Network

This paper presents the design of a small printed ultra wideband antenna with Band Notched characteristics. Both the free space and on-body performances of this antenna were investigated through simulation. The newly designed UWB antenna is more revised small form factor sized, with the ability to avoid interference caused by WLAN (5.15 - 5.825 GHz) and WiMAX (5.25 - 5.85 GHz) systems with a band notch. The return loss response, gain, radiation pattern on free space of the antenna were investigated. After that, the on-body performances were tested on 3-layer human body model with radiation pattern, gain, return loss, and efficiency at 3.5, 5.7, 8, 10 GHz and all the results were compared with free space results. As the on-body performance was very good, the proposed antenna will be suitable to be used for multi-purpose medical applications and sports performance monitoring.

基于MOEA/D算法的三陷波超宽带天线设计

为实现超宽带通信中对WIMAX(3.3~3.7 GHz)、WLAN(5.150~5.825 GHz)和ITU(8.01~8.50 GHz)频段干扰的抑制,提出了一种基于MOEA/D算法优化设计的具有三陷波特性的超宽带天线。天线采用T形结构作为辐射贴片,通过改变贴片形状等方法实现在3~12 GHz的超宽带。在辐射贴片上刻蚀两个U形缝隙和在传输线两侧加载C形开口环,对天线进行陷波设计。利用MOEA/D算法对陷波结构的结构参数和加载位置进行优化,实现了在3.31~3.69 GHz、5.25~6.13 GHz和8.01~8.51 GHz频段的陷波效果,成功抑制了频段干扰。与传统扫频优化的设计方法相比,采用MOEA/D算法设计的天线在陷波频带内增益低至-19 dB,各陷波频带准确度误差均在3.6%以下,提高了天线的设计效率,具有一定的工程应用价值。

基于人工表面等离激元的小型化电可调缺口带滤波器

具有小型化的缺口带滤波器在微波集成系统中具有广泛的应用前景.本文基于倒山形单元的人工表面等离激元(spoof surface plasmon polariton,SSPP)提出了一种新型小型化电可调缺口带滤波器.与相同横向尺寸的传统SSPP单元相比,所提出的倒山形单元的色散曲线表现出更好的慢波特性,渐近频率降低至原来的55%.缺口带的频率可通过调整变容二极管两端的偏置电压来动态控制.随着偏置电压从0.5 V增至30 V,缺口带频率从2.1 GHz移动到2.3 GHz,实现动态调节.仿真结果表明,缺口带滤波器通带内实现了较低的插入损耗(S_(21)<-1 dB)和良好的回波损耗(S_(11)>-10 dB),并且具有小型化的优势,尺寸仅为0.78λ_(g)×0.35λ_(g),λ_(g)是中心频率处的波长.采用印刷电路板技术实际加工了缺口带滤波器.实物测量和仿真结果吻合较好,验证了设计的可靠性.

双陷波可重构特性的蓝牙超宽带天线设计

提出了一种具有双陷波可重构特性的蓝牙/超宽带(UWB)天线。天线由削顶圆形单极子天线加载1/4波长圆弧枝节组成。在圆形贴片上刻蚀2个半波长圆形缝隙,实现WLAN(5.125~5.825 GHz)和ITU(8.025~8.4 GHz)频段的陷波功能。通过控制安装在陷波结构中PIN二极管的工作状态,能够实现陷波的可重构特性。测试与仿真结果表明:在天线工作频段2.39~2.52 GHz和2.92~12 GHz内,天线辐射性能良好,峰值增益达到5.2 dBi。可广泛应用在各种通信系统。