The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded c...The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded cast steel joint was analyzed to determine the optimal mesh size.Based on the stress field analysis of the finite element model of the welded cast steel joint at the weld toe and weld root,the sharp model of the extrapolation notch stress method was applied to derive the effective notch stress of the rounded model belonging to the effective notch stress method,in which the key problem is to calculate the extrapolation point C,and the extrapolation point C has an exponential function relationship with the geometric parameters of the welded cast steel joint.By setting different values of geometric parameters,the corresponding value of parameter C is calculated,and then the functional relationship between the extrapolation point C and the geometric parameters can be obtained by the multiple linear regression analysis.Meanwhile,the fatigue life evaluation of the girth butt weld within welded cast steel joints based on the effective notch stress was performed according to the guideline recommended by the IIW(International Institute of Welding).The results indicate that the extrapolation notch stress method can effectively simplify the process of calculating the effective notch stress and accurately evaluate the fatigue life of the girth butt weld within welded cast steel joints.展开更多
Based on Zak＇s stress function, the eigen-equation of stress singularity ofbi-materials with a V-notch was obtained. A new definition of stress intensity factor for a perpendicular interfacial V-notch of bi-material ...Based on Zak＇s stress function, the eigen-equation of stress singularity ofbi-materials with a V-notch was obtained. A new definition of stress intensity factor for a perpendicular interfacial V-notch of bi-material was put forward. The effects of shear modulus and Poisson＇s ratio of the matrix material and attaching material on eigen-values were analyzed. A generalized expression for calculating/（i of the perpendicular V-notch of bi-materials was obtained by means of stress extrapolation. Effects of notch depth, notch angle and Poisson＇s ratio of materials on the singular stress field near the tip of the V-notch were analyzed systematically with numerical simulations. As an example, a finite plate with double edge notches under uniaxial uniform tension was calculated by the method presented and the influence of the notch angle and Poisson＇s ratio on the stress singularity near the tip of notch was obtained.展开更多
In this paper, the boundary element method is applied to investigate the internal state of stress of autofretted tube with notch and the calculated results are important in the practical design.
Ln this paper, the super-inverse iterative method is proposed to compute the accurate and complete eigen-solutions for anti-plane cracks/notches with multi-materials, arbitrary opening angles and various surface condi...Ln this paper, the super-inverse iterative method is proposed to compute the accurate and complete eigen-solutions for anti-plane cracks/notches with multi-materials, arbitrary opening angles and various surface conditions. Taking the advantage of the knowledge of the variation forms of the eigen-functions, a series of numerical techniques are proposed to simplify the computation and speed up the convergence rare of the inverse iteration. A number of numerical examples are given to demonstrate the excellent accuracy, efficiency and reliability of the proposed approach.展开更多
Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the metho...Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the method of SA and considering the variance of refractive index as the readout wavelength changes, a practiced notch filter can be designed and the period of the filter is discussed.展开更多
The distribution of hydrogen near the notch tip of the austenitic steel 21Cr9Ni9MnN under mode Ⅰ loading has been studid with ion microprobe mass analyzer.Two peaks of hydrogen accumulation,one at notch tip and other...The distribution of hydrogen near the notch tip of the austenitic steel 21Cr9Ni9MnN under mode Ⅰ loading has been studid with ion microprobe mass analyzer.Two peaks of hydrogen accumulation,one at notch tip and other far apart from it,were found.The distribution of hydrostatic stress and plastic strain in front of the notch tip under planar stress condition were calculated using ADINA non-linear finite element method.The calculated result in compari- son with data measured showed that the hydrogen concentration peak at the notch tip is caused by trapping effect of dislocation on dissolved hydrogen,while the other from the hydrostatic stress.The influence of stress intensity factor on the distribution of hydrogen con- centration and the process of hydrogen accumulation near notch tip was also discussed.展开更多
根据ST12钢的双点及三点拉剪电阻点焊试件的恒幅疲劳测试结果,分别使用缺口应力法和等效结构应力法进行疲劳寿命预测。在使用缺口应力法时,按试件的实际尺寸和国际焊接学会(International institute of welding, IIW)推荐标准,分别建立...根据ST12钢的双点及三点拉剪电阻点焊试件的恒幅疲劳测试结果,分别使用缺口应力法和等效结构应力法进行疲劳寿命预测。在使用缺口应力法时,按试件的实际尺寸和国际焊接学会(International institute of welding, IIW)推荐标准,分别建立了双点和三点拉剪试件的三维实体有限元模型进行弹性应力分析,从有限元分析结果提取von Mises最大应力变化值,结合IIW推荐标准中的S-N曲线对试件进行疲劳寿命分析预测;在使用结构应力法时则采用梁壳混合单元进行有限元应力分析,并且根据主S-N曲线进行疲劳寿命预测。结果表明,在低周疲劳范围内,缺口应力法和等效结构应力法预测的结果相对于试件的实际寿命有较好地相关性,其中等效结构应力法的结果更接近实验寿命结果。展开更多
基金The National Key Research and Development Program of China(No.2017YFC0805100),the National Natural Science Foundation of China(No.51578137)the Priority Academic Program Development of Jiangsu Higher Education Institutions,the Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics.
文摘The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded cast steel joint was analyzed to determine the optimal mesh size.Based on the stress field analysis of the finite element model of the welded cast steel joint at the weld toe and weld root,the sharp model of the extrapolation notch stress method was applied to derive the effective notch stress of the rounded model belonging to the effective notch stress method,in which the key problem is to calculate the extrapolation point C,and the extrapolation point C has an exponential function relationship with the geometric parameters of the welded cast steel joint.By setting different values of geometric parameters,the corresponding value of parameter C is calculated,and then the functional relationship between the extrapolation point C and the geometric parameters can be obtained by the multiple linear regression analysis.Meanwhile,the fatigue life evaluation of the girth butt weld within welded cast steel joints based on the effective notch stress was performed according to the guideline recommended by the IIW(International Institute of Welding).The results indicate that the extrapolation notch stress method can effectively simplify the process of calculating the effective notch stress and accurately evaluate the fatigue life of the girth butt weld within welded cast steel joints.
基金supported by the Ministry of Education of China(No.208152)Gansu Natural Science Foundation(No.3ZS061-A52-47).
文摘Based on Zak＇s stress function, the eigen-equation of stress singularity ofbi-materials with a V-notch was obtained. A new definition of stress intensity factor for a perpendicular interfacial V-notch of bi-material was put forward. The effects of shear modulus and Poisson＇s ratio of the matrix material and attaching material on eigen-values were analyzed. A generalized expression for calculating/（i of the perpendicular V-notch of bi-materials was obtained by means of stress extrapolation. Effects of notch depth, notch angle and Poisson＇s ratio of materials on the singular stress field near the tip of the V-notch were analyzed systematically with numerical simulations. As an example, a finite plate with double edge notches under uniaxial uniform tension was calculated by the method presented and the influence of the notch angle and Poisson＇s ratio on the stress singularity near the tip of notch was obtained.
文摘In this paper, the boundary element method is applied to investigate the internal state of stress of autofretted tube with notch and the calculated results are important in the practical design.
基金The project is supported by the Natural Science Foundation of China.
文摘Ln this paper, the super-inverse iterative method is proposed to compute the accurate and complete eigen-solutions for anti-plane cracks/notches with multi-materials, arbitrary opening angles and various surface conditions. Taking the advantage of the knowledge of the variation forms of the eigen-functions, a series of numerical techniques are proposed to simplify the computation and speed up the convergence rare of the inverse iteration. A number of numerical examples are given to demonstrate the excellent accuracy, efficiency and reliability of the proposed approach.
基金Supported by the National Natural Science Foundation of China!696 07005)
文摘Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the method of SA and considering the variance of refractive index as the readout wavelength changes, a practiced notch filter can be designed and the period of the filter is discussed.
文摘The distribution of hydrogen near the notch tip of the austenitic steel 21Cr9Ni9MnN under mode Ⅰ loading has been studid with ion microprobe mass analyzer.Two peaks of hydrogen accumulation,one at notch tip and other far apart from it,were found.The distribution of hydrostatic stress and plastic strain in front of the notch tip under planar stress condition were calculated using ADINA non-linear finite element method.The calculated result in compari- son with data measured showed that the hydrogen concentration peak at the notch tip is caused by trapping effect of dislocation on dissolved hydrogen,while the other from the hydrostatic stress.The influence of stress intensity factor on the distribution of hydrogen con- centration and the process of hydrogen accumulation near notch tip was also discussed.
文摘根据ST12钢的双点及三点拉剪电阻点焊试件的恒幅疲劳测试结果,分别使用缺口应力法和等效结构应力法进行疲劳寿命预测。在使用缺口应力法时,按试件的实际尺寸和国际焊接学会(International institute of welding, IIW)推荐标准,分别建立了双点和三点拉剪试件的三维实体有限元模型进行弹性应力分析,从有限元分析结果提取von Mises最大应力变化值,结合IIW推荐标准中的S-N曲线对试件进行疲劳寿命分析预测;在使用结构应力法时则采用梁壳混合单元进行有限元应力分析,并且根据主S-N曲线进行疲劳寿命预测。结果表明,在低周疲劳范围内,缺口应力法和等效结构应力法预测的结果相对于试件的实际寿命有较好地相关性,其中等效结构应力法的结果更接近实验寿命结果。
