期刊文献+
共找到221篇文章
< 1 2 12 >
每页显示 20 50 100
Sliding modes of fault activation under constant normal stiffness conditions 被引量:2
1
作者 Chuanqing Zhang Jie Xu +3 位作者 Shengji Jin Guojian Cui Yuhang Guo Lingyu Li 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2023年第5期1213-1225,共13页
Fault activation has been the focus of research community for years.However,the studies of fault activation remain immature,such as the fault activation mode and its major factors under constant normal stiffness(CNS)c... Fault activation has been the focus of research community for years.However,the studies of fault activation remain immature,such as the fault activation mode and its major factors under constant normal stiffness(CNS)conditions associated with large thickness of fault surrounding rock mass.In this study,the rock friction experiments were conducted to understand the fault activation modes under the CNS conditions.Two major parameters,i.e.the initial normal stress and loading rate,were considered and calibrated in the tests.To reveal the response mechanism of fault activation,the local strains near the fault plane were recorded,and the macroscopic stresses and displacements were analyzed.The testing results show that the effect of displacement-controlled loading rate is more pronounced under the CNS conditions than that under constant normal load(CNL)conditions.Both the normal and shear stresses drop suddenly when the stick-slip occurs.The decrease and increase of the normal stress are synchronous with the shear stress in the regular stick-slip scenario,but mismatch with the shear stress during the chaotic stick-slip process.The results are helpful for understanding the fault sliding mode and the prediction and prevention of fault slip. 展开更多
关键词 Fault activation Rock friction mechanics Sliding modes constant normal stiffness(CNS) Displacement-controlled loading rates ROCKBURST
下载PDF
INTERNAL FRICTION AND ELASTIC CONSTANTS OF Pd-B-H ALLOYS
2
作者 Y.L.Chen 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 1998年第1期51-55,共5页
Internal friction measurements on binary and ternary α-phase alloys of Pd with hydrogen and boron have been performed with a torsion pendulum and by observing the cttenuation of ultrasonic pulses. A pronounced dampin... Internal friction measurements on binary and ternary α-phase alloys of Pd with hydrogen and boron have been performed with a torsion pendulum and by observing the cttenuation of ultrasonic pulses. A pronounced damping maximum of binary Pd-B alloys at 220K and measuring frequencies of about 4Hz could not be established at a frequency of 15MH. Ternary Pd-B-H alloys show an additional damping maximum besides the hydrogen Zener effect, which is interpreted in terms of a changed jump frequency of hydrogen in the neighborhood of boron atoms. 展开更多
关键词 Pd-B-H alioy internal friction elastic constant Zener effect
下载PDF
Role of N/Z in Pre-scission Neutrons as an Observable of Nuclear Friction
3
作者 CHEN Na YE Wei 《Communications in Theoretical Physics》 SCIE CAS CSCD 2009年第8期329-332,共4页
A dynamical Langevin model is employed to evaluate the excess of the neutron emission in the fission ofheavy nuclei ^(240)Cf,^(246)Cf,^(254)Cf,^(240)U relative to the standard statistical-model prediction at various s... A dynamical Langevin model is employed to evaluate the excess of the neutron emission in the fission ofheavy nuclei ^(240)Cf,^(246)Cf,^(254)Cf,^(240)U relative to the standard statistical-model prediction at various saddle-to-scissionfriction strengths.It is shown that when the neutron-to-proton ratio N/Z of the system increases,the sensitivityof the excess to the friction decreases substantially,and it almost disappears for ^(240)U.We suggest that using thosecompound systems with low N/Z favors an accurate determination for the saddle-to-scission friction strength based onthe measurement of the pre-scission neutron multiplicity. 展开更多
关键词 pre-scission neutron multiplicity N/Z effect nuclear friction Langevin model
下载PDF
Calculations Energy of the (<i>nl</i><sup>2</sup>) <sup>1</sup><i>L<sup>π</sup></i>Doubly Excited States of Two-Electron Systems via the Screening Constant by Unit Nuclear Charge Formalism
4
作者 Momar Talla Gning Ibrahima Sakho Malick Sow 《Journal of Modern Physics》 2020年第11期1891-1910,共20页
In this work, the total energies of doubly excited states (<em>ns</em><sup>2</sup>) <sup>1</sup>S<sup>e</sup>, (<em>np</em><sup>2</sup>) <sup&... In this work, the total energies of doubly excited states (<em>ns</em><sup>2</sup>) <sup>1</sup>S<sup>e</sup>, (<em>np</em><sup>2</sup>) <sup>1</sup>D<sup>e</sup>, (<em>nd</em><sup>2</sup>) <sup>1</sup>G<sup>e</sup>, (<em>nf</em><sup>2</sup>) <sup>1</sup>I<sup>e</sup>, (<em>ng</em><sup>2</sup>) <sup>1</sup>K<sup>e</sup>, and (<em>nh</em><sup>2</sup>) <sup>1</sup>M<sup>e</sup> of the helium isoelectronic sequence with Z ≤ 10 are calculated in the framework of the variational method of the Screening Constant by Unit Nuclear Charge (SCUNC). These calculations are performed using a new wavefunction correlated to Hylleraas-type. The possibility of using the SCUNC method in the investigation of high-lying Doubly Excited States(DES) in two-electron systems is demonstrated in the present work in the case of the (<em>nl</em><sup>2</sup>) <sup>1</sup><em>L</em><sup><span style="white-space:nowrap;"><span style="white-space:nowrap;"><span style="white-space:nowrap;"><em>&pi;</em></span></span></span></sup> doubly excited states, where accurate total energies are tabulated up to <em>n</em> = 20. All the results obtained in this paper are in agreement with the values of the available literature and may be useful for future experimental and theoretical studies on the doubly excited (<em>nl</em><sup>2</sup>) <sup>1</sup><em>L</em><sup><span style="white-space:nowrap;"><span style="white-space:nowrap;"><em>π</em></span></span></sup> states of two-electron systems. 展开更多
关键词 Doubly Excited States Helium-Like Systems Screening constant by Unit nuclear Charge (SCUNC) Wave Functions Correlated Total Energy
下载PDF
激光冲击强化技术在核电领域的研究进展 被引量:1
5
作者 蔡振兵 周龙龙 +6 位作者 俞延庆 方修洋 余施佳 周留成 何卫锋 李国杰 何艳磊 《中国表面工程》 EI CAS CSCD 北大核心 2024年第1期41-58,共18页
激光冲击强化技术属于改善金属性能的重要表面形变强化技术,因其独特的技术优势在航天及船舶领域获得广泛应用。随着科技的发展研发出多种激光冲击强化技术,并逐渐开始在核电装备领域获得应用,然而针对该技术在核电领域的研究进展缺乏... 激光冲击强化技术属于改善金属性能的重要表面形变强化技术,因其独特的技术优势在航天及船舶领域获得广泛应用。随着科技的发展研发出多种激光冲击强化技术,并逐渐开始在核电装备领域获得应用,然而针对该技术在核电领域的研究进展缺乏系统的综述。先通过介绍不同表面形变强化技术,叙述激光冲击强化技术的发展,阐述激光冲击强化机制,最后综述激光冲击强化技术在核电领域的应用研究进展。总结发现,激光冲击强化技术可有效改善核电领域材料力学、摩擦磨损及腐蚀性能,但传统和添加辅助手段激光冲击强化技术受约束层和吸收层影响较大,无涂激光冲击强化技术对金属易产生热效应,飞秒激光冲击强化影响层浅且强化效果差,不同工艺技术在核电领域提升摩擦磨损性能研究较少。对不同工艺激光冲击强化机理及在核电领域材料不同性能的提升进行深入研究,为进一步提升激光冲击强化技术在核电领域材料的应用提供理论基础,可为核电领域关键装备进行强化、提升核电装备运行寿命提供参考。 展开更多
关键词 激光强化 核电装备 摩擦磨损 腐蚀 极端环境 先进制造
下载PDF
不同含水率下秦王川黄土抗剪强度与细观结构特征研究
6
作者 李杰林 李大千 +1 位作者 杨承业 张童 《黄金科学技术》 CSCD 北大核心 2024年第5期860-870,共11页
为研究不同含水率下黄土的抗剪强度和细观结构特征,以秦王川重塑黄土为研究对象,利用四联自动直剪仪和核磁共振仪进行了直剪和核磁共振试验。试验结果表明:秦王川黄土重塑土的总体抗剪强度随含水率的增大而降低,黏聚力随含水率的增大呈... 为研究不同含水率下黄土的抗剪强度和细观结构特征,以秦王川重塑黄土为研究对象,利用四联自动直剪仪和核磁共振仪进行了直剪和核磁共振试验。试验结果表明:秦王川黄土重塑土的总体抗剪强度随含水率的增大而降低,黏聚力随含水率的增大呈先增大后减小的变化趋势,内摩擦角呈先减小后增大再减小的变化趋势;含水率变化对土体黏聚力的影响较大,而对内摩擦角的影响较小;土样内部孔隙率随含水率的增大而增大,水分不断从小尺寸孔隙向中大尺寸孔隙扩散,且土体内部的小尺寸孔隙有不断扩展和贯通的趋势;随着含水率的增大,土样的延性和塑性也得到增强,应力—应变曲线特征由应变软化转变为应变硬化;随着含水率的增大,土样内部水分的形态也逐渐变化,由强结合水主导不断向弱结合水主导发展,最后变成自由水主导,导致土颗粒之间的胶结作用力、水膜作用力以及基质吸力减弱,进而导致土样总体抗剪强度降低。本研究成果可为地区黄土工程建设提供数据支持和理论参考。 展开更多
关键词 黄土 含水率 核磁共振 黏聚力 内摩擦角 孔隙率
下载PDF
不同焊接方法下燃料元件包壳用ODS钢焊接接头界面演化规律
7
作者 杨灿湘 魏连峰 +7 位作者 郑勇 王宇 董宇 王军健 李华鑫 杨建国 张鸿羽 侯霭麟 《电焊机》 2024年第5期39-45,共7页
ODS钢具有优异的高温力学性能、抗辐照性能和抗热蠕变性能等,是最有潜力的下一代核反应堆包壳候选材料之一。ODS钢的焊接技术主要包括熔焊、钎焊、压力焊等,根据核燃料元件包壳结构,选择电子束焊接、旋转摩擦焊及脉冲电流辅助扩散焊三... ODS钢具有优异的高温力学性能、抗辐照性能和抗热蠕变性能等,是最有潜力的下一代核反应堆包壳候选材料之一。ODS钢的焊接技术主要包括熔焊、钎焊、压力焊等,根据核燃料元件包壳结构,选择电子束焊接、旋转摩擦焊及脉冲电流辅助扩散焊三种焊接方法进行对比研究,并对ODS钢焊接接头微观形貌演化进行分析,揭示了最优焊接方法及界面形貌演化规律。结果表明,电子束焊接及旋转摩擦焊接工艺下,焊接接头的晶界处均有Y_(2)O_(3)析出,而采用脉冲电流辅助扩散焊无氧化物析出和团聚,对于Fe-Cr系ODS钢有突出优势。因此,脉冲电流辅助扩散焊在抑制ODS钢中纳米氧化物的析出、团聚和减少接头变形等方面具有显著优势,是一种适合ODS钢焊接的高质量焊接方法。 展开更多
关键词 ODS钢 核燃料元件焊接 电子束焊接 旋转摩擦焊接 脉冲电流辅助扩散焊接
下载PDF
核主泵用机械密封摩擦学性能研究进展
8
作者 曾群锋 梁艳 《液压气动与密封》 2024年第4期15-22,共8页
核主泵是核电厂的核心元件,核主泵机械密封在其中起到防止介质泄漏的作用。当前,我国核主泵密封装置相关技术和产品受到国外垄断限制,核主泵摩擦副在运行状态下泄漏严重破坏核电系统的稳定运行和长周期服役,其摩擦学性能直接影响核主泵... 核主泵是核电厂的核心元件,核主泵机械密封在其中起到防止介质泄漏的作用。当前,我国核主泵密封装置相关技术和产品受到国外垄断限制,核主泵摩擦副在运行状态下泄漏严重破坏核电系统的稳定运行和长周期服役,其摩擦学性能直接影响核主泵的运行性能。对于动压式核主泵机械密封,若没有处于完全液膜润滑状态,密封装置会出现异常磨损和泄漏率增大导致核主泵故障。针对核主泵摩擦副的液膜特性,从数学模型计算和软件仿真两方面分析。对温度场、速度场和应力场等进行分析,总结了密封环及副密封材料、端面热变形对摩擦学性能的影响,概述了端面形状的动压润滑机理及波度面、槽型结构和加工方法等因素对摩擦磨损的影响,为核主泵密封性能的提高和可靠运行提供理论基础。 展开更多
关键词 核主泵 动压型机械密封 摩擦特性 液膜特性 端面形状
下载PDF
基于溶液实验的堆芯物理多群常数库临界基准检验方法
9
作者 陈莹 吴海成 +3 位作者 温丽丽 吴小飞 肖越 唐辉 《原子能科学技术》 EI CAS CSCD 北大核心 2024年第5期1069-1075,共7页
堆芯物理多群常数库为反应堆计算程序的中子学计算提供多群截面数据以及燃耗数据,是反应堆物理计算的重要前提。目前国际上对多群数据库的验证通常将待验证的多群数据库耦合组件计算程序通过对临界基准实验进行模拟计算的方式来进行,各... 堆芯物理多群常数库为反应堆计算程序的中子学计算提供多群截面数据以及燃耗数据,是反应堆物理计算的重要前提。目前国际上对多群数据库的验证通常将待验证的多群数据库耦合组件计算程序通过对临界基准实验进行模拟计算的方式来进行,各组件计算程序由于几何处理方法的局限无法对球形装置进行建模,因此尚未有基于球形临界基准实验对多群常数库进行基准检验的方法。本文提出了一种裸球形实验装置的模型建立方法,大幅增加临界基准检验使用的基准实验选择范围,同时基于国际核临界安全手册(ICSBEP2006)挑选了不同能谱指标下的49个铀、钚溶液实验对中国核数据中心研制的堆芯物理多群常数库进行临界基准检验,并给出了不同能谱指标下基准实验的参考结果范围。本文结果可扩大堆芯物理多群常数库基准检验规模和覆盖范围,有助于高保真堆芯物理计算程序准确性的进一步提升。 展开更多
关键词 多群常数库 国际核临界安全手册 溶液实验 临界基准检验
下载PDF
台式小核磁共振波谱法测定聚乙烯密度
10
作者 张强 李虞 +2 位作者 张仲明 杨利娟 孙惠 《石油化工》 CAS CSCD 北大核心 2024年第1期84-89,共6页
以密度梯度柱法测得的线型低密度聚乙烯(LLDPE)试样的密度为标准,建立了台式小核磁共振波谱法(简称小核磁法)测试LLDPE密度的标准曲线,分析了试样存放时间、恒温测试温度、存放温度对小核磁法准确度和重复性的影响。实验结果表明,存放时... 以密度梯度柱法测得的线型低密度聚乙烯(LLDPE)试样的密度为标准,建立了台式小核磁共振波谱法(简称小核磁法)测试LLDPE密度的标准曲线,分析了试样存放时间、恒温测试温度、存放温度对小核磁法准确度和重复性的影响。实验结果表明,存放时间60~120 d的LLDPE试样可用作标准试样;恒温温度分别为35.0℃和34.5℃时,小核磁法测得的密度与密度梯度柱法得到的密度较吻合。造粒后LLDPE立即在-23℃下冷冻后可用于建立标准曲线。利用标准曲线,对生产装置取出的试样立刻用小核磁法测试密度,结果满足重复性与准确度的要求。小核磁法测密度快速且可批量测试,节省人力和时间,维护简单,健康环保。利用LLDPE粒料存放时间与小核磁法密度的关系表,可通过小核磁法快速准确测定已知生产时间的LLDPE的密度。 展开更多
关键词 小核磁共振波谱法 密度 恒温温度 重复性
下载PDF
核安全级DCS设备危险频率下的电接触摩擦学特性
11
作者 王东伟 李发强 +3 位作者 赵阳 黄起昌 汪凡雨 刘滨 《中国机械工程》 EI CAS CSCD 北大核心 2024年第11期2063-2070,共8页
为研究核安全级分布式控制系统(DCS)设备中的电接触摩擦学特性,对核安全级DCS设备的危险频率进行了评估。建立了一套球面电接触摩擦学试验装置,在危险频率下进行了一系列载流摩擦学试验,探索不同电流作用下界面摩擦磨损特性。研究结果表... 为研究核安全级分布式控制系统(DCS)设备中的电接触摩擦学特性,对核安全级DCS设备的危险频率进行了评估。建立了一套球面电接触摩擦学试验装置,在危险频率下进行了一系列载流摩擦学试验,探索不同电流作用下界面摩擦磨损特性。研究结果表明,核安全级DCS设备的危险频率为12 Hz;在该频率下,随着输入电流从1 A增大至3 A,摩擦因数呈现先减小后增大的趋势;在大电流作用下,电接触达到失效的时长显著增长;电接触界面表现出划痕、颗粒、微裂纹、磨屑堆积和磨屑飞溅等5种特征;虽然接触区域存在一定的氧化产物,但是只要有足够多的接触区域实现导电通路,界面依然能够保持良好的电接触状态。 展开更多
关键词 核安全级DCS 电接触 摩擦磨损 表面分析
下载PDF
基于摩擦摆支座的核安全壳结构隔震效果研究
12
作者 祁鹏飞 裴强 +2 位作者 谯裕豪 鲁蕴华 夏超南 《工程抗震与加固改造》 北大核心 2024年第4期120-127,共8页
核安全壳是防止核裂变产物泄漏的最后一道屏障,属于I类抗震物项,但近些年以日本福岛地震为代表性的超设计基准地震频发,故安全壳的抗震性能值得关注。基底隔震可以有效降低结构的地震响应,摩擦摆隔震支座因其优良的隔震性能已被广泛应... 核安全壳是防止核裂变产物泄漏的最后一道屏障,属于I类抗震物项,但近些年以日本福岛地震为代表性的超设计基准地震频发,故安全壳的抗震性能值得关注。基底隔震可以有效降低结构的地震响应,摩擦摆隔震支座因其优良的隔震性能已被广泛应用于桥梁、房屋建筑中,但目前尚未有核安全壳的应用实例。为此本文基于ANSYS有限元软件建立摩擦摆支座隔震和非隔震安全壳结构整体模型,通过输入相同地震动对比分析核安全壳结构的频率、位移、加速度以及剪力等指标,研究摩擦摆支座在核安全壳结构隔震中的应用可行性。分析结果表明:隔震结构基本周期相比不隔震结构显著提高,且隔震结构的层间相对位移、加速度和剪力值等指标均小于非隔震结构,进一步说明隔震支座有利于提高核安全壳的抗震性能。 展开更多
关键词 核安全壳 摩擦摆支座 基础隔震 时程分析
下载PDF
某核电厂汽轮发电机组末级叶片拉筋凸台的断裂原因
13
作者 闵济东 罗贤龙 +4 位作者 文学 李祥奎 张寅 王方方 陈碧强 《机械工程材料》 CAS CSCD 北大核心 2024年第7期114-118,共5页
某核电厂汽轮发电机组低压缸末级叶片在累积运行约72个月后,在拉筋凸台处发生了断裂,通过宏观形貌观察、化学成分分析、显微组织观察以及硬度测试等方法分析了拉筋凸台的断裂原因。结果表明:末级叶片拉筋凸台断裂性质为疲劳断裂,发生断... 某核电厂汽轮发电机组低压缸末级叶片在累积运行约72个月后,在拉筋凸台处发生了断裂,通过宏观形貌观察、化学成分分析、显微组织观察以及硬度测试等方法分析了拉筋凸台的断裂原因。结果表明:末级叶片拉筋凸台断裂性质为疲劳断裂,发生断裂的原因是相邻叶片拉筋凸台的实际配合状态不佳,造成拉筋凸台表面受力不均匀,局部承受的挤压力过大,使得拉筋凸台在汽轮发电机轴转动时承受不均匀的接触摩擦,在交变载荷的作用下,疲劳裂纹在接触面受力最大的粗糙表面处萌生并逐渐扩展,最终导致拉筋凸台的局部断裂。 展开更多
关键词 核电机组 末级叶片 拉筋凸台 疲劳断裂 接触摩擦
下载PDF
Determination of the constant m_(i) in the Hoek-Brown criterion of rock based on drilling parameters 被引量:8
14
作者 Haoteng Wang Mingming He +1 位作者 Zhiqiang Zhang Jiwei Zhu 《International Journal of Mining Science and Technology》 SCIE EI CAS CSCD 2022年第4期747-759,共13页
The constant m_(i) in the Hoek-Brown(H-B) criterion is a fundamental parameter required for determining the compressive strength of rock. In this paper, drilling parameters provide a new basis for determining the cons... The constant m_(i) in the Hoek-Brown(H-B) criterion is a fundamental parameter required for determining the compressive strength of rock. In this paper, drilling parameters provide a new basis for determining the constant mi. An analytical relationship between the drilling parameters and constant miis established in consideration of the contact response between the drilling bit and the cut rock in the crushed zone.New models are developed to predict the triaxial compressive strength(TCS), internal friction angle φand cohesion c of rock. Drilling tests are carried out on 6 rock types to study the correlation between φ and m_(i). A comparison between the predicted values of rock mechanical properties and the measured values from the laboratory is performed to verify the accuracy of the proposed model(yielding an error less than 10%). The TCSs and constant m_(i) values of fifteen rocks are cited to validate the accuracy of the proposed model. The result shows that the proposed model predicts the TCS and constant m_(i) within a maximum error of 20%. The method can be conveniently applied to the rock mechanical properties. 展开更多
关键词 constant miin the H-B criterion Analytical model friction angle Drilling parameters Triaxial compressive strength
下载PDF
Large Capacity Constant Spring Support Hanger Design Optimization 被引量:1
15
作者 HU Xian-wei 《International Journal of Plant Engineering and Management》 2012年第3期182-186,共5页
This article discussed how to improve constant force performance of the large capacity constant spring support hangers. Large deviations have been found between product testing results and theoretical calculations aft... This article discussed how to improve constant force performance of the large capacity constant spring support hangers. Large deviations have been found between product testing results and theoretical calculations after years of research and testing. The deviations mainly are caused by internal frictions inside the constant spring support hangers. By reducing or properly using internal frictions, consistent results between testing and theoretical calculation have been achieved. Based on product performance testing results recently, constant force performance of hangers has been improved greatly by adopting new methodology. 展开更多
关键词 constant hanger friction SPRING
下载PDF
INTERNAL FRICTION STUDY ON STRUCTURAL RELAXATION OF METALLIC GLASSES
16
作者 LI Xiaoguang HE Yizhen 《Chinese Physics Letters》 SCIE CAS 1988年第6期273-276,共4页
During structural relaxation of a glassy matrix,the apparent internal friction(Q^(-1))decreased with the increase of annealing time(t).The dependence of Q^(-1) on t can be shown as Q^(-1)=At^(-β)+B,where A,B andβare... During structural relaxation of a glassy matrix,the apparent internal friction(Q^(-1))decreased with the increase of annealing time(t).The dependence of Q^(-1) on t can be shown as Q^(-1)=At^(-β)+B,where A,B andβare constants. 展开更多
关键词 friction constantS RELAXATION
下载PDF
Micellar Exchange Kinetics of Quaternary Ammonium Type Gemini Surfactants Monitored by Nuclear Magnetic Resonance
17
作者 Jun Liu You-ru Du +1 位作者 Shi-zhen Mao Mai-li Liu 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2018年第2期159-164,245,共7页
The dynamic NMR (DNMR) method was used to detect kinetic parameters of the molecular exchange process between monomers in bulk solution and those in the micelle for Gemini surfactants, 12-s-12 and 14-s-14 (s 2, 3 a... The dynamic NMR (DNMR) method was used to detect kinetic parameters of the molecular exchange process between monomers in bulk solution and those in the micelle for Gemini surfactants, 12-s-12 and 14-s-14 (s 2, 3 and 4). The escape rate constant, k^- , was derived based on the simplified equations of DNMR theory, and the apparent activation energy of escape, Ea^- , was obtained based on the Arrhenius equation through temperature variation experiments. Results show that the orders of magnitude of k^- for 14-s-14 and 12-s-12 are respectively 10 and 103 s-1, Ea^- of 14-s-14 and 12-s-12 are respectively 54.04-73.64 and 33.42-47.09 kJ/rnol. Furthermore, k increases and Ea^- decreases with the spacer length growing. In combination with the rnicro-polarity measurements, it was revealed that molecules of 14-s-14 and 12-s-12 have to experience conformation changes when escaping from the rnicelles. The two-step molecular exchange mechanism for Gemini surfactants was therefore supported. 展开更多
关键词 Gemini surfactants Dynamic nuclear magnetic resonance Molecular exchange Exchange rate constant Apparent activation energy Two-step exchange mechanism
下载PDF
Mechanism of Hetero-nuclear β-type Chelates Formed by Rare Earths with p-sulphoaminobromophosphonazo
18
作者 袁莉 查飞 +1 位作者 高锦章 陈慧 《Rare Metals》 SCIE EI CAS CSCD 2000年第4期269-274,共6页
The reaction behavior of forming the hetero-nuclear β-type chelates of rare earth ions (RE 3+) with p-sulphoaminobromophosphonazo(BPA-pSN) in ClCH_2COOH-CH_3COONa buffer solutions were studied by a spectrophotometri... The reaction behavior of forming the hetero-nuclear β-type chelates of rare earth ions (RE 3+) with p-sulphoaminobromophosphonazo(BPA-pSN) in ClCH_2COOH-CH_3COONa buffer solutions were studied by a spectrophotometric method. The interaction of RE 3+ with BPA-pSN, which can forms hetero-nuclear β-type chelates having composition ratio of RE_1 (light rare earth):BPA-pSN:RE_2(heavy rare earth ion)=1∶3∶1, is a first-order reaction. Meanwhile, BPA-pSN can only forms homo-nuclear β-type chelates with heavy rare earth ions, having a composition ratio of RE∶BPA-pSN=1∶2 and being a second-order reaction. The rate constants of forming homo-and hetero-nuclear β-type chelates were obtained and the mechanism of forming hetero-nuclear β-type chelates was proposed. 展开更多
关键词 Rate constant Reaction mechanism Hetero-nuclear β-type chelates
下载PDF
Chinese Evaluated Nuclear Parameter Library(CENPL)(Ⅰ)
19
作者 Su Zong-di Ge Zig-gang Zhang Li-min Ma Li-zhen Sun Zheng-jun Wang Chen-xiang Chinese Nuclear Data Centre,China Institute of Atomic Energy,P.O.Box 275(41),Beijing 102413Huang Zhong-fu Guangxi University,Nanning 530004Liu Jian-feng Zhengzhou University,Zhengzhou 450052Yu Zi-qiang Zuo Yi-xin Nankai University,Tianjin 300071Ma Gong-gui Sichuan University,Chengdu 610064 《Chinese journal of nuclear physics》 1995年第3期271-276,共6页
As a library of nuclear basic data and nuclear model parameters for nuclear model calculations,Chinese Evaluated Nuclear Parameter Library(CENPL)at Chinese Nuclear Data Center(CNDC)consists of six sub-libraries and is... As a library of nuclear basic data and nuclear model parameters for nuclear model calculations,Chinese Evaluated Nuclear Parameter Library(CENPL)at Chinese Nuclear Data Center(CNDC)consists of six sub-libraries and is still under development.Most of the data fries for this library have beenset up.These sub-libraries have been used to retrieve the data required for nuclear model calculations andother purposes. 展开更多
关键词 nuclear MODEL parameter library Atomic mass and characteristic constantS Discrete LEVEL scheme LEVEL density PARAMETERS Giant dipole resonance PARAMETERS FISSION barrier PARAMETERS Optical MODEL PARAMETERS
下载PDF
Complex FEM Based System of Computer Codes to Model Nuclear Fuel Rod Thermo-Mechanical Behavior
20
作者 Martin Dostal Mojmir Valach Jiri Zymak 《材料科学与工程(中英文B版)》 2011年第3期323-331,共9页
关键词 热机械行为 计算机代码 核燃料棒 有限元法 代码系统 子模型 基础 行为建模
下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部