A robust & weak-nucleophilicity electrocatalyst with an inert response for chlorine ion oxidation in large-current seawater electrolysis

Seawater splitting into hydrogen,a promising technology,is seriously limited by the durability and tolerance of electrocatalysts for chlorine ions in seawater at large current densities due to chloride oxidation and corrosion.Here,we present a robust and weak-nucleophilicity nickel-iron hydroxide electrocatalyst with excellent selectivity for oxygen evolution and an inert response for chlorine ion oxidation which are key and highly desired for efficient seawater electrolysis.Such a weak-nucleophilicity electrocatalyst can well match with strong-nucleophilicity OH-compared with the weak-nucleophilicity Cl^(-),resultantly,the oxidation of OH-in electrolyte can be more easily achieved relative to chlorine ion oxidation,confirmed by ethylenediaminetetraacetic acid disodium probing test.Further,no strongly corrosive hypochlorite is produced when the operating voltage reaches about 2.1 V vs.RHE,a potential that is far beyond the thermodynamic potential of chlorine ion oxidatio n.This concept and approach to reasonably designing weaknucleophilicity electrocatalysts that can greatly avoid chlorine ion oxidation under alkaline seawater environments can push forward the seawater electrolysis technology and also accelerate the development of green hydrogen technique.

Carbon enhanced nucleophilicity of Na_(3)V_(2)(PO_(4))_(3):A general approach for dendrite-free zinc metal anodes

Zincophilic property and high electrical conductivity are both very important parameters to design novel Zn anode for aqueous Zn-ion batteries(AZIBs).However,single material is difficult to exhibit zincophilic property and high electrical conductivity at the same time.Herein,originating from theoretical calculation,a zincophilic particle regulation strategy is proposed to address these limitations and carbon coated Na_(3)V_(2)(PO_(4))_(3)is taken as an example to be a protective layer on zinc metal(NVPC@Zn).Na_(3)V_(2)(PO_(4))_(3)(NVP)is a common cathode material for Zn-ion batteries,which is zincophilic.Carbon materials not only offer an electron pathway to help Zn deposition onto NVPC surface,but also enhance the zinc nucleophilicity of Na_(3)V_(2)(PO_(4))_(3).Hence,this hybrid coating layer can tune zinc deposition and resist side reactions such as hydrogen generation and Zn metal corrosion.Experimentally,a symmetrical battery with NVPC@Zn electrode displays highly reversible plating/stripping behavior with a long cycle lifespan over 1800 h at2 mA cm^(-2),much better than carbon and Na_(3)V_(2)(PO_(4))_(3)solely modified Zn electrodes.When the Na_(3)V_(2)(PO_(4))_(3)is replaced with zincophobic Al2O3or zincophilic V2O3,the stability of the modified zinc anodes is also prolonged.This strategy expands the option of zincophilic materials and provides a general and effective way to stabilize the Zn electrode.

HIGH NUCLEOPHILICITY OF FORMATE TOWARD POLYHALOFLUOROALKENES

High nucleophilicity of formate toward polyhalofluoroalkenes under acidic condition is described. This reaction offers a convenient method for the synthesis of E-α,β-unsaturated polyhalofluorocarboxylic acids.

Application of the HSAB principle for the quantitative analysis of nucleophilicity/basicity of organic compounds with lone-pair electrons

Based on the density functional theory,we described here a method to investigate the quantitative relationship between nucleophilicity/basicity and HSAB-theory-based properties of compounds with lone-pair electrons.Descriptors including global softness,Fukui function,local softness and local mulliken charge were calculated at SVWN/DN~* level of DFT with PC Spartan Pro.Nucleophilicity and basicity of 28 selected compounds were classified based on intensity.BP algorithm of artificial neural network(ANN) was employed to study the relationship between the descriptors and nucleophilicity/basicity.Cross-validation was carried out to avoid the over-fitting in training of ANN.A BP network was trained to quantify the relationship between HSAB-theory-based properties and nucleophilicity/basicity of compounds with lone-pair electrons.The results show that the prediction based on the network matches with the experimental results well.The local softness and Fukui function have a better relationship with nucleophilicity and local mulliken charge than with the basicity.The trained BP network could be utilized for predicting the nucleophilicity/basicity of compounds or functional groups with lone-pair electrons.

Application of the HSAB principle for the quantitative analysis of nucleophilicity/basicity of organic compounds with lone-pair electrons

Based on the density functional theory, we described here a method to investigate the quantitative relationship between nucleophilicity/basicity and HSAB-theory-based properties of compounds with lone-pair electrons. Descriptors including global softness, Fukui function, local softness and local mulliken charge were calculated at SVWN/DN＊ level of DFT with PC Spartan Pro. Nucleophilicity and basicity of 28 selected compounds were classified based on intensity. BP algorithm of artificial neural network （ANN） was employed to study the relationship between the descriptors and nucleophilicity/basicity. Cross-validation was carried out to avoid the over-fitting in training of ANN. A BP network was trained to quantify the relationship between HSAB-theory-based properties and nucleophilicity/basicity of compounds with lone-pair electrons. The results show that the prediction based on the network matches with the experimental results well. The local softness and Fukui function have a better relationship with nucleophilicity and local mulliken charge than with the basicity. The trained BP network could be utilized for predicting the nucleophilicity/basicity of compounds or functional groups with lone-pair electrons.

Prediction of the Photofading of Selected Derivatives of 5-(4-X-Phenylazo)-3-Cyano-1-(H or Ethyl)-6-Hydroxy-4-Methyl-2-Pyridone: Theoretical Studies, Comparison of AM1 and PM3 Methods

We analysed the photooxidation reaction in the electro-(1O2) and nucleophilic (O2•−) reaction of 2-pyridone azo derivatives. First, we calculated the energy (enthalpies) of tautomers formation, which is a measure of durability and the probability of their formation. We performed the light fastness calculations of the monoazopyridone dyes. Using the semi-empirical methods of quantum chemistry AM1 and PM3, the reactivity indicators of superdelocalisability (SrE(N)) and the electron density distribution in ground state on the highest occupied HOMO orbital and the lowest unoccupied excited state LUMO in 2-pyridone phenylazo derivatives were calculated. Superdelocalisability coefficients enable the stability to oxidising agents of various chemical molecules depending on the tautomeric forms in which they may occur. The results of the electron density calculations at the HOMO and LUMO boundary orbitals allow to determine the tendency to electrophilic attack with singlet oxygen 1O2 or nucleophilic attack of the superoxide anion O2•−on a specific atom in the molecule. The structure of the dyes was optimised with MM+, MD and AM1 or PM3 until a constant energy value was achieved with a convergence criterion of 0.01 kcal/mol.

Mesoporous poly(ionic liquid)s with dual active sites for highly efficient CO_(2)conversion

Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture and conversion of CO_(2)into value-added products,such as cyclic carbonates,is booming.While CO_(2)is an abundant,cheap,non-toxic,and readily accessible Cl feedstock,its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions.In this work,a novel mesoporous poly(ionic liquid)with dual active sites was synthesized through a facile method that involves co-polymerization,post-synthetic metalation,and supercritical CO_(2)drying.Due to a high density of nucleophilic and electrophilic sites,the as-prepared poly(ionic liquid),denoted as P2D-4BrBQA-Zn,offers excellent performance in a CO_(2)cycloaddition reaction using epichlorohydrin as the substrate(98.9%conversion and 96.9%selectivity).Moreover the reaction is carried out under mild,solvent-free,and additive-free conditions.Notably,P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates.Overall,the catalyst is found to have excellent substrate compatibility,stability,and recyclability.

2,4-Dinitrophenyl Ether of Polyvinyl Alcohol and Polymer Bound Anionic SIGMA Complexes

A new electrophilic polymer, 2,4-dinitrophenyl ether of polyvinyl alcohol (PVA-DNP), having a degree of substitution of 0.5 was prepared from polyvinyl alcohol (PVA) and 1-fluro-2,4-dinitrobenzene (DNFB). The PVA-DNP polymer was characterized by NMR, IR, and UV-visible spectroscopy. The reaction of PVA-DNP with sodium methoxide was followed by NMR and UV-visible spectroscopy. Evidence of polymer bound spirocyclic SIGMA complex, C-1 and C-3 polymer bound DNP-methoxy SIGMA complexes and the formation and C-1 methoxy complex of 2,4-dinitroanisole was observed.

Reactivity of Indoles through the Eyes of a Charge-Transfer Partitioning Analysis

A global and local charge transfer partitioning model,based on the cornerstone theory developed by Robert G.Parr and Robert G.Pearson,which introduces two charge transfer channels(one for accepting electrons(electrophilic) and another for donating(nucleophilic)),is applied to the reaction of a set of indoles with 4,6-dinitrobenzofuroxan.The global analysis indicates that the prevalent electron transfer mechanism in the reaction is a nucleophilic one on the indoles,i.e.,the indoles under consideration transfer electrons to 4,6-dinitrobenzofuroxan.Evaluating the reactivity descriptorswith exchange-correlation functionals including exact exchange(global hybrids) yields slightly better correlations than those obtained with generalized gradient-approximated functionals;however,the trends are preserved.Comparing the trend obtained with the number of electrons donated by the indoles,and predicted by the partitioning model,with that observed experimentally based on the measured rate constants,we propose that the number of electrons transferred through this channel can be used as a nucleophilicity scale to order the reactivity of indoles towards 4,6-dinitrobenzofuroxan.This approach to obtain reactivity scales has the advantage of depending on the intrinsic properties of the two reacting species;therefore,it opens the possibility that the same group of molecules may show different reactivity trends depending on the species with which they are reacting.The local model allows systematic incorporation of the reactive atoms based on the their decreasing condensed Fukui functions,and the correlations obtained by increasing the number of reactive atoms participating in the local analysis of the transferred nucleophilic charge improve,reaching an optimal correlation,which in the present case indicates keeping three atoms from the indoles and two from 4,6-dinitrobenzofuroxan.The atoms selected by this procedure provide valuable information about the local reactivity of the indoles.We further show that this information about the most reactive atoms on each reactant,combined with the spatial distribution of the nucleophilic and electrophilic Fukui functions of both reactants,allows one to propose non-trivial candidates of starting geometries for the search of the transition state structures present in these reactions.

Ionic Liquid Solvent Based on Cyclic Guanidinium Cation for Nucleophilic Displacement Reactions

The nucleophilic displacement reaction of n-bromooctane and potassium iodide in ionic liquid based on cyclic guanidinium cation(2) was investigated. The kinetic reasult shows that the rate of the reaction is enhanced in ionic liquid (2). The same reaction in [bmim][PF6](1)(where bmim=1-butyl-3-methylimidazolium) was also studied. It was found that as a reaction medium ionic liquid (2) is better than (1) for nucelophilic displacement reactions.

Predicting Rate Constants for Nucleophilic Reactions of Amines with Diarylcarbenium Ions Using an ONIOM Method

The rate constants of the nucleophilic reactions between amines and benzhydrylium ions were calculated using first-principles theoretical methods. Solvation models including PCM, CPCM, and COSMORS, as well as different types of atomic radii including UA0, UAKS, UAHF, Bondi, and UFF, and several single-point energy calculation methods （B3LYP, B3P86, B3PW91, BHANDH, PBEPBE, BMK, M06, MP2, and ONIOM method） were examined. By comparing the correlation between experimental rate constants and the calculated values, the ONIOM（CCSD（T）/6-311＋＋G（2df,2p）：B3LYP/6-311＋＋G（2df,2p））//B3LYP/6- 31G（d）/PCM/UFF） method was found to perform the best. This method was then employed to calculate the rate constants of the reactions between diverse amines and diarylcarbenium ions. The calculated rate constants for 65 reactions of amines with diarylcarbenium ions are in agreement with the experimental values, indicating that it is feasible to predict the rate constant of a reaction between an amine and a diarylcarbenium ion through ab initio calculation.

A flexible design strategy to modify Ti3C2Tx MXene surface terminations via nucleophilic substitution for long-life Li-S batteries

MXene-based materials have gained considerable attention for lithium-sulfur(Li-S)batteries cathode materials due to their superior electric conductivity and high affinitive to polysulfides.However,there are still challenges in modifying the surface functional groups of MXene to further improve the electrochemical performance and increase the structure variety for MXene-based sulfur host.Herein,we report an efficient and flexible nucleophilic substitution(S_(N))strategy to modify the Ti_(3)C_(2)T_(x) surface terminations and purposefully designed Magnolol-modified Ti_(3)C_(2)T_(x)(M-Ti_(3)C_(2)T_(x))as powerful cathode host materials.Benefiting from more C-Ti-O bonds forming and diallyl groups terminations reducing after the dehalogenation and nucleophilic addition reactions,the given M-Ti_(3)C_(2)T_(x) electrode could effectively suppress the lithium polysulfides shuttling via chemisorption and C—S covalent bond formation.Besides,the Magnolol-modified Ti_(3)C_(2)T_(x) significantly accelerates polysulfide redox reaction and reduces the activation energy of Li_(2) S decomposition.As a result,the as-prepared M-Ti_(3)C_(2)T_(x) electrode displays an excellent rate capability and a high reversible capacity of 7.68 mAh cm^(-2)even under 7.2 mg cm^(-2)S-loaded with a low decay rate of 0.07%(from 2 nd cycle).This flexible surface-modified strategy for MXene terminations is expected to be extended to other diverse MXene applications.

Regio-and Diasteroselectivity of Rhodium-catalyzed Ring Opening Reaction of Oxabenzonorbornadienes with Heteroatom Nucleophiles

A new rhodium catalyzed ring opening reaction of oxabenzonorbornadienes and its derivatives was described. This reaction forms a new carbon-nitrogen bond via an intermolecular allylic displacement of the bridgehead oxygen with a piperazine's derivatives, which proceeds with very high regioselectivity.

(Et_4N)_2[Fe_4(SPh)_10] Stimulated S_(RN)1 Reactions of α-Bromonaphth-alene with Pinacolone Carbanion

The (Et_4N)_2[Fe_4(SPh)_10] stimulated reaction of α-bromonaphthalene with pinacolone carbanion in DMSO leads to the formation of 1-(α-naphthyl)pinacolone. The reaction is suggested in terms of SRN1 mechanism of aromatic nucleophillic substitution and has potential value in synthesis to obtain (-substituted naphthalene derivaties.

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4'-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer,4,4'-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA),wassynthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4'-biphenol.The monomer wasreacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series ofpolyimides.The polyimides,PI-1 to PI-4,show good solubility not only in aprotic solvents,such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide,but also in many common solvents,such as m-cresol,chloroform andcyclopentanone.PI-4,derived from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA,was even soluble intoluene.Moreover,PI films exhibit good thermal stability,outstanding transparency in the visible light region and acceptablemechanical and electrical properties.The excellent combined properties of the polyimides make them as a good candidate forfabricating microelectronics.

Theoretical Insights into the Inhibition Performance of Three Neonicotine Derivatives as Novel Type of Inhibitors on Carbon Steel

The adsorption process of new nicotinic derivatives on Fe(110)surface and diffusion of corrosive particles in inhibition film were studied by quantum chemistry and molecular dynamics simulation,and inhibition mechanism of inhibitor was discussed.The results indicated that the main active sites of three inhibitors are located in N atoms on the five membered ring.The inhibitor YM-1 has the strongest activity of electrophilic reaction,and the adsorption process of inhibitor molecules is polycentric chemisorption.The adsorption energy for inhibitors followed the order of YM-1>YM-2>YM-3.The adsorption film YM-1 more effectively impedes the diffusion and migration of the corrosive particles,and also has the best inhibitory effect on Cl-.In addition,the bond energy of chemical bond formed between inhibitor and Fe atom increases as the increase of temperature.The interaction between corrosive particles and inhibitors is dominated by Van der Waals force.

A reaction density functional theory study of solvent effect in the nucleophilic addition reactions in aqueous solution

Whereas the proper choice of reaction solvent constitutes the cornerstone of the green solvent concept,solvent effects on chemical reactions are not mechanistically well understood due to the lack of feasible molecular models.Herein,by taking the case study of nucleophilic addition reaction in aqueous solution,we extend the proposed multiscale reaction density functional theory(RxDFT)method to investigate the intrinsic free energy profile and total free energy profile,and study the solvent effect on the activation and reaction free energy for the nucleophilic addition reactions of hydroxide anion with methanal and carbon dioxide in aqueous solution.The predictions of the free energy profile in aqueous solution for these two nucleophilic addition reactions from RxDFT have a satisfactory agreement with the results from the RISM and MD-FEP simulation.Meanwhile,the solvent effect is successfully addressed by examining the difference of the free energy profile between the gas phase and aqueous phase.In addition,we investigate the solvent effect on the reactions occurred near solid-liquid interfaces.It is shown that the activation free energy is significantly depressed when reaction takes place in the region within 10A distance to the substrate surface owing to the decrease of hydration free energy at the solid-liquid interface.

A Novel Nucleophilic Substitution of 3-Halo-6-phenoxypyridazines

A novel nucleophilic substitution of pyridazines is found, in which phenoxy group is dislodged rather than the halogen atom, on treating 3-halo-6-phenoxypyridazines with alkoxy anion. The reactivity of substituents on benzene ring and the halogen atom of pyridazines are studied. Reasonable explanation based on the quantum chemical calculations are given.

^(31)P NMR Study on Some Phosphorus-Containing Compounds

31P NMR has become a widely applied spectroscopic probe of the structure of phosphorus-containing compounds. Meanwhile, the application of 31P NMR has been rapidly expanded to biochemistry and medicinal chemistry of phosphorus-containing compounds because the growing importance of the phosphorus compounds is now widely realized. We report here the results of 31P NMR study on some phosphorus-containing compounds, namely, O-alkyl O-4-nitrophenyl methyl phosphonates with different alkyl chain-length (MePO-n), 4-nitrophenyl alkylphenylphosphinates with different alkyl chain-length (PhP-n), diethyl phosphono- acetonitrile anion and diethyl phosphite anion . Our results indicate that 31P NMR can not only be applied to not only the study of the hydrolytic reactions of MePO-8 and PhP-8 but also be applied to the study of the presence of the anions of diethylphosphonoacetonitrile and diethyl phosphite in nucleophilic reactions.

STRUCTURE AND PROPERTIES OF PHOSPHROUS-CONTAINING POLY(ARYLETHER KETONE)WITH BISPHENOL-A MOIETY

A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature （Tg） of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer＇s CH2Cl2 solution. The limiting oxygen index （LOI） of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.