The present work investigates the effect of filler metals and heat input on weld bead geometry and mechanical properties of alloy316 welded by using GTAW.ER309 L,ER316 L and ERNi Cr Mo-3 filler metals,are applied to s...The present work investigates the effect of filler metals and heat input on weld bead geometry and mechanical properties of alloy316 welded by using GTAW.ER309 L,ER316 L and ERNi Cr Mo-3 filler metals,are applied to study their effect on the weldment.Weld defects are examined using radiographic testing.The mechanical properties of welds are evaluated through uniaxial testing,hardness measuring,and bending test.The mechanical properties and cooling rate decrease with increasing heat input.Tensile strength,yield stress and percentage elongation of weldments using three fillers are determined.Best results are obtained using ERNi Cr Mo-3.Besides,weld nugget area,cooling time and solidification time increases with increasing heat input.Finally,applying bending test on weld samples,cracks,tearing and surface defects are not observed.展开更多
The modeling control method based on the dynamic resistance characteristics of good nuggets, that is the DRC method, is an improvement on the dynamic resistance threshold method for the quality control of resistance s...The modeling control method based on the dynamic resistance characteristics of good nuggets, that is the DRC method, is an improvement on the dynamic resistance threshold method for the quality control of resistance spot welding. But there is still a control blind area in the initial four cycles. For this reason, the quality of every weld nugget could not be fully ensured. Thus a new fuzzy cooperative control method is put forward. It uses a multi-information time-control mechanism by combining the constant current control technology with the DRC method in a relay way. This whole-process control strategy has led to a good control effect and produced the dual-identical results in the weld nugget quality and the welding time.展开更多
文摘The present work investigates the effect of filler metals and heat input on weld bead geometry and mechanical properties of alloy316 welded by using GTAW.ER309 L,ER316 L and ERNi Cr Mo-3 filler metals,are applied to study their effect on the weldment.Weld defects are examined using radiographic testing.The mechanical properties of welds are evaluated through uniaxial testing,hardness measuring,and bending test.The mechanical properties and cooling rate decrease with increasing heat input.Tensile strength,yield stress and percentage elongation of weldments using three fillers are determined.Best results are obtained using ERNi Cr Mo-3.Besides,weld nugget area,cooling time and solidification time increases with increasing heat input.Finally,applying bending test on weld samples,cracks,tearing and surface defects are not observed.
文摘The modeling control method based on the dynamic resistance characteristics of good nuggets, that is the DRC method, is an improvement on the dynamic resistance threshold method for the quality control of resistance spot welding. But there is still a control blind area in the initial four cycles. For this reason, the quality of every weld nugget could not be fully ensured. Thus a new fuzzy cooperative control method is put forward. It uses a multi-information time-control mechanism by combining the constant current control technology with the DRC method in a relay way. This whole-process control strategy has led to a good control effect and produced the dual-identical results in the weld nugget quality and the welding time.
