Stochastic sampled-data multi-objective control of active suspension systems for in-wheel motor driven electric vehicles

This paper addresses the sampled-data multi-objective active suspension control problem for an in-wheel motor driven electric vehicle subject to stochastic sampling periods and asynchronous premise variables.The focus is placed on the scenario that the dynamical state of the half-vehicle active suspension system is transmitted over an in-vehicle controller area network that only permits the transmission of sampled data packets.For this purpose,a stochastic sampling mechanism is developed such that the sampling periods can randomly switch among different values with certain mathematical probabilities.Then,an asynchronous fuzzy sampled-data controller,featuring distinct premise variables from the active suspension system,is constructed to eliminate the stringent requirement that the sampled-data controller has to share the same grades of membership.Furthermore,novel criteria for both stability analysis and controller design are derived in order to guarantee that the resultant closed-loop active suspension system is stochastically stable with simultaneous𝐻2 and𝐻∞performance requirements.Finally,the effectiveness of the proposed stochastic sampled-data multi-objective control method is verified via several numerical cases studies in both time domain and frequency domain under various road disturbance profiles.

Effect of low-degree astigmatism on the objective visual quality

AIM:To evaluate the effect of low-degree astigmatism on objective visual quality through the Optical Quality Analysis System(OQAS).METHODS:This study enrolled 46 participants(aged 23 to 30y,90 eyes)with normal or corrected-to-normal vision.The cylindrical lenses(0,0.5,0.75,1.0,and 1.25 D)were placed at the axial direction(180°,45°,90°,and 135°)in front of the eyes with the best correction to form 16 types of regular low-degree astigmatism.OQAS was used to detect the objective visual quality,recorded as the objective scattering index(OSI),OQAS values at contrasts of 100%,20%,and 9%predictive visual acuity(OV100%,OV20%,and OV9%),modulation transfer function cut-off(MTFcut-off)and Strehl ratio(SR).The mixed effect linear model was used to compare objective visual quality differences between groups and examine associations between astigmatic magnitude and objective visual quality parameters.RESULTS:Apparent negative relationships between the magnitude of low astigmatism and objective visual quality were observed.The increase of OSI per degree of astigmatism at 180°,45°,90°,and 135°axis were 0.38(95%CI:0.35,0.42),0.50(95%CI:0.46,0.53),0.49(95%CI:0.45,0.54)and 0.37(95%CI:0.34,0.41),respectively.The decrease of MTFcut-off per degree of astigmatism at 180°,45°,90°,and 135°axis were-10.30(95%CI:-11.43,-9.16),-12.73(95%CI:-13.62,-11.86),-12.75(95%CI:-13.79,-11.70),and-9.97(95%CI:-10.92,-9.03),respectively.At the same astigmatism degree,OSI at 45°and 90°axis were higher than that at 0°and 135°axis,while MTFcut-off were lower.CONCLUSION:Low astigmatism of only 0.50 D can significantly reduce the objective visual quality.

Distributed Stochastic Optimization with Compression for Non-Strongly Convex Objectives

We are investigating the distributed optimization problem,where a network of nodes works together to minimize a global objective that is a finite sum of their stored local functions.Since nodes exchange optimization parameters through the wireless network,large-scale training models can create communication bottlenecks,resulting in slower training times.To address this issue,CHOCO-SGD was proposed,which allows compressing information with arbitrary precision without reducing the convergence rate for strongly convex objective functions.Nevertheless,most convex functions are not strongly convex(such as logistic regression or Lasso),which raises the question of whether this algorithm can be applied to non-strongly convex functions.In this paper,we provide the first theoretical analysis of the convergence rate of CHOCO-SGD on non-strongly convex objectives.We derive a sufficient condition,which limits the fidelity of compression,to guarantee convergence.Moreover,our analysis demonstrates that within the fidelity threshold,this algorithm can significantly reduce transmission burden while maintaining the same convergence rate order as its no-compression equivalent.Numerical experiments further validate the theoretical findings by demonstrating that CHOCO-SGD improves communication efficiency and keeps the same convergence rate order simultaneously.And experiments also show that the algorithm fails to converge with low compression fidelity and in time-varying topologies.Overall,our study offers valuable insights into the potential applicability of CHOCO-SGD for non-strongly convex objectives.Additionally,we provide practical guidelines for researchers seeking to utilize this algorithm in real-world scenarios.

An Optimal Control-Based Distributed Reinforcement Learning Framework for A Class of Non-Convex Objective Functionals of the Multi-Agent Network

This paper studies a novel distributed optimization problem that aims to minimize the sum of the non-convex objective functionals of the multi-agent network under privacy protection, which means that the local objective of each agent is unknown to others. The above problem involves complexity simultaneously in the time and space aspects. Yet existing works about distributed optimization mainly consider privacy protection in the space aspect where the decision variable is a vector with finite dimensions. In contrast, when the time aspect is considered in this paper, the decision variable is a continuous function concerning time. Hence, the minimization of the overall functional belongs to the calculus of variations. Traditional works usually aim to seek the optimal decision function. Due to privacy protection and non-convexity, the Euler-Lagrange equation of the proposed problem is a complicated partial differential equation.Hence, we seek the optimal decision derivative function rather than the decision function. This manner can be regarded as seeking the control input for an optimal control problem, for which we propose a centralized reinforcement learning(RL) framework. In the space aspect, we further present a distributed reinforcement learning framework to deal with the impact of privacy protection. Finally, rigorous theoretical analysis and simulation validate the effectiveness of our framework.

Multiobjective economic model predictive control using utopia-tracking for the wet flue gas desulphurization system

Efficient control of the desulphurization system is challenging in maximizing the economic objective while reducing the SO_(2) emission concentration. The conventional optimization method is generally based on a hierarchical structure in which the upper optimization layer calculates the steady-state results and the lower control layer is responsible to drive the process to the target point. However, the conventional hierarchical structure does not take the economic performance of the dynamic tracking process into account. To this end, multi-objective economic model predictive control(MOEMPC) is introduced in this paper, which unifies the optimization and control layers in a single stage. The objective functions are formulated in terms of a dynamic horizon and to balance the stability and economic performance. In the MOEMPC scheme, economic performance and SO_(2) emission performance are guaranteed by tracking a set of utopia points during dynamic transitions. The terminal penalty function and stabilizing constraint conditions are designed to ensure the stability of the system. Finally, an optimized control method for the stable operation of the complex desulfurization system has been established. Simulation results demonstrate that MOEMPC is superior over another control strategy in terms of economic performance and emission reduction, especially when the desulphurization system suffers from frequent flue gas disturbances.

Objective Model Selection in Physics: Exploring the Finite Information Quantity Approach

Traditional methods for selecting models in experimental data analysis are susceptible to researcher bias, hindering exploration of alternative explanations and potentially leading to overfitting. The Finite Information Quantity (FIQ) approach offers a novel solution by acknowledging the inherent limitations in information processing capacity of physical systems. This framework facilitates the development of objective criteria for model selection (comparative uncertainty) and paves the way for a more comprehensive understanding of phenomena through exploring diverse explanations. This work presents a detailed comparison of the FIQ approach with ten established model selection methods, highlighting the advantages and limitations of each. We demonstrate the potential of FIQ to enhance the objectivity and robustness of scientific inquiry through three practical examples: selecting appropriate models for measuring fundamental constants, sound velocity, and underwater electrical discharges. Further research is warranted to explore the full applicability of FIQ across various scientific disciplines.

Multi-Objective Adaptive Optimization Model Predictive Control:Decreasing Carbon Emissions from a Zinc Oxide Rotary Kiln

The zinc oxide rotary kiln,as an essential piece of equipment in the zinc smelting industrial process,is presenting new challenges in process control.China’s strategy of achieving a carbon peak and carbon neutrality is putting new demands on the industry,including green production and the use of fewer resources;thus,traditional stability control is no longer suitable for multi-objective control tasks.Although researchers have revealed the principle of the rotary kiln and set up computational fluid dynamics(CFD)simulation models to study its dynamics,these models cannot be directly applied to process control due to their high computational complexity.To address these issues,this paper proposes a multi-objective adaptive optimization model predictive control(MAO-MPC)method based on sparse identification.More specifically,with a large amount of data collected from a CFD model,a sparse regression problem is first formulated and solved to obtain a reduction model.Then,a two-layered control framework including real-time optimization(RTO)and model predictive control(MPC)is designed.In the RTO layer,an optimization problem with the goal of achieving optimal operation performance and the lowest possible resource consumption is set up.By solving the optimization problem in real time,a suitable setting value is sent to the MPC layer to ensure that the zinc oxide rotary kiln always functions in an optimal state.Our experiments show the strength and reliability of the proposed method,which reduces the usage of coal while maintaining high profits.

Determination of AVR System PID Controller Parameters Using Improved Variants of Reptile Search Algorithm and a Novel Objective Function

Two novel improved variants of reptile search algorithm(RSA),RSA with opposition-based learning(ORSA)and hybrid ORSA with pattern search(ORSAPS),are proposed to determine the proportional,integral,and derivative(PID)controller parameters of an automatic voltage regulator(AVR)system using a novel objective function with augmented flexibility.In the proposed algorithms,the opposition-based learning technique improves the global search abilities of the original RSA algorithm,while the hybridization with the pattern search(PS)algorithm improves the local search abilities.Both algorithms are compared with the original RSA algorithm and have shown to be highly effective algorithms for tuning the PID controller parameters of an AVR system by getting superior results.Several analyses such as transient,stability,robustness,disturbance rejection,and trajectory tracking are conducted to test the performance of the proposed algorithms,which have validated the good promise of the proposed methods for controller designs.The performances of the proposed design approaches are also compared with the previously reported PID controller parameter tuning approaches to assess their success.It is shown that both proposed approaches obtain excellent and robust results among all compared ones.That is,with the adjustment of the weight factorα,which is introduced by the proposed objective function,for a system with high bandwitdh(α=1),the proposed ORSAPS-PID system has 2.08%more bandwidth than the proposed ORSA-PID system and 5.1%faster than the fastest algorithm from the literature.On the other hand,for a system where high phase and gain margins are desired(α=10),the proposed ORSA-PID system has 0.53%more phase margin and 2.18%more gain margin than the proposed ORSAPS-PID system and has 0.71%more phase margin and 2.25%more gain margin than the best performing algorithm from the literature.

Eclipse计划系统MU Objective工具在鼻咽癌容积调强放射治疗计划中的应用研究

目的:探讨Varian Eclipse计划系统MU Objective工具在鼻咽癌容积调强放射治疗(VMAT)计划中的应用,旨在保证治疗计划质量的同时降低治疗计划的机器跳数(MU)。方法:选取已接受容积调强放射治疗技术的21例鼻咽癌患者,在未使用MU Objective工具的情况下给每例患者设计治疗参考计划(MU_(ref));将使用MU Objective工具对MU_(ref)进行重新优化,分别设置MU_(ref)的MU的30%、50%、70%、90%和120%,分别命名为MU_(30%)、MU_(50%)、MU_(70%)、MU_(90%)和MU_(120%)。将治疗计划MU_(30%)、MU_(50%)、MU_(70%)、MU_(90%)和MU_(120%)分别与MU_(ref)进行配对t检验统计分析,比较两种治疗计划的靶区、危及器官(OAR)剂量分布和计划的MU。结果:使用MU Objective工具对参考计划优化MU后,与参考计划相比部分靶区和OAR剂量体积参数差异虽有统计学意义,但无临床意义。治疗计划参数为MU_(30%)、MU_(50%)、MU_(70%)和MU_(90%)时,与MU_(ref)比较计划MU平均分别减少21.5%、19.5%、16.6%和8%,差异有统计学意义(t=9.652,t=8.843,t=8.963,t=11.323;P<0.05)。在MU_(120%)时,治疗计划MU平均增加1.7%,但未显著提高靶区剂量覆盖。结论:对于鼻咽癌VMAT计划,使用Eclipse计划系统的MU Objective工具在减少计划MU的同时可获得与参考计划相似的剂量分布。MU Objective工具可作为鼻咽癌或其他部位VMAT计划的常规使用工具,以保证计划质量同时减少放射治疗计划的MU。

Multi-objective Stability Control Algorithm of Heavy Tractor Semi-trailer Based on Differential Braking

Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.

Aircraft Landing Gear Control with Multi-Objective Optimization Using Generalized Cell Mapping

This paper presents a numerical algorithm tuning aircraft landing gear control system with three objectives,including reducing relative vibration, reducing hydraulic strut force and controlling energy consumption. Sliding mode control is applied to the vibration control of a simplified landing gear model with uncertainty. A two-stage generalized cell mapping algorithm is applied to search the Pareto set with gradient-free scheme. Drop test simulations over uneven runway show that the vibration and force interaction can be considerably reduced, and the Pareto optimum form a tight range in time domain.

Modelling and Multi-Objective Optimal Control of Batch Processes Using Recurrent Neuro-fuzzy Networks

In this paper, the modelling and multi-objective optimal control of batch processes, using a recurrent neuro-fuzzy network, are presented. The recurrent neuro-fuzzy network, forms a ＂global＂ nonlinear long-range prediction model through the fuzzy conjunction of a number of ＂local＂ linear dynamic models. Network output is fed back to network input through one or more time delay units, which ensure that predictions from the recurrent neuro-fuzzy network are long-range. In building a recurrent neural network model, process knowledge is used initially to partition the processes non-linear characteristics into several local operating regions, and to aid in the initialisation of corresponding network weights. Process operational data is then used to train the network. Membership functions of the local regimes are identified, and local models are discovered via network training. Based on a recurrent neuro-fuzzy network model, a multi-objective optimal control policy can be obtained. The proposed technique is applied to a fed-batch reactor.

Recent Progress in Reinforcement Learning and Adaptive Dynamic Programming for Advanced Control Applications

Reinforcement learning(RL) has roots in dynamic programming and it is called adaptive/approximate dynamic programming(ADP) within the control community. This paper reviews recent developments in ADP along with RL and its applications to various advanced control fields. First, the background of the development of ADP is described, emphasizing the significance of regulation and tracking control problems. Some effective offline and online algorithms for ADP/adaptive critic control are displayed, where the main results towards discrete-time systems and continuous-time systems are surveyed, respectively.Then, the research progress on adaptive critic control based on the event-triggered framework and under uncertain environment is discussed, respectively, where event-based design, robust stabilization, and game design are reviewed. Moreover, the extensions of ADP for addressing control problems under complex environment attract enormous attention. The ADP architecture is revisited under the perspective of data-driven and RL frameworks,showing how they promote ADP formulation significantly.Finally, several typical control applications with respect to RL and ADP are summarized, particularly in the fields of wastewater treatment processes and power systems, followed by some general prospects for future research. Overall, the comprehensive survey on ADP and RL for advanced control applications has d emonstrated its remarkable potential within the artificial intelligence era. In addition, it also plays a vital role in promoting environmental protection and industrial intelligence.

Multi-objective optimization for voltage and frequency control of smart grids based on controllable loads

The output uncertainty of high-proportion distributed power generation severely affects the system voltage and frequency.Simultaneously,controllable loads have also annually increased,which markedly improve the capability for nodal-power control.To maintain the system frequency and voltage magnitude around rated values,a new multi-objective optimization model for both voltage and frequency control is proposed.Moreover,a great similarity between the multiobjective optimization and game problems appears.To reduce the strong subjectivity of the traditional methods,the idea and method of the game theory are introduced into the solution.According to the present situational data and analysis of the voltage and frequency sensitivities to nodal-power variations,the design variables involved in the voltage and frequency control are classified into two strategy spaces for players using hierarchical clustering.Finally,the effectiveness and rationality of the proposed control are verified in MATLAB.

Design andtwo-objective simultaneous optimization of torque controller for switched reluctance motor in electric vehicle

In order to reduce the torque ripple,increase the average torque and optimize the drive performance of the switched reluctance motor (SRM),the nonlinear dynamic model of SRM is established in the MATLAB /Simulink environment.The effects of the turn-on and turn-off angles are investigated by the simulation results of the dynamic model,and the function is made among the rotor speed,turn-on angle and turn-off angle.To optimize the torque dynamic performance,the two-objective simultaneous optimization function is proposed by two weight factors.And the optimized turn-on and turn-off angles as functions of rotor speed are developed by using the simultaneous optimization method.Then the optimized torque controller is designed based on the optimized turn-on and turn-off angles.The simulation results show that the optimized torque controller designed in this paper can effectively reduce the torque ripple and increase the average torque,and optimize the torque dynamic performance of the SRM.

A multi-objective optimal PID control for a nonlinear system with time delay

It is generally difficult to design feedback controls of nonlinear systems with time delay to meet time domain specifications such as rise time, overshoot, and tracking error. Furthermore, these time domain specifications tend to be conflicting to each other to make the control design even more challenging. This paper presents a cell mapping method for multi-objective optimal feedback control design in time domain for a nonlinear Duffing system with time delay. We first review the multi-objective optimization problem and its formulation for control design. We then introduce the cell mapping method and a hybrid algorithm for global optimal solutions. Numerical simulations of the PID control are presented to show the features of the multi-objective optimal design. @ 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi：10.1063/2.1306306]

Objective Identification and Climatic Characteristics of Heavy-Precipitation Northeastern China Cold Vortexes

The northeastern China cold vortex(NCCV)plays an important role in regional rainstorms over East Asia.Using the National Centers for Environmental Prediction Final reanalysis dataset and the Global Precipitation Measurement product,an objective algorithm for identifying heavy-precipitation NCCV(HPCV)events was designed,and the climatological features of 164 HPCV events from 2001 to 2019 were investigated.The number of HPCV events showed an upward linear trend,with the highest frequency of occurrence in summer.The most active region of HPCV samples was the Northeast China Plain between 40°–55°N.Most HPCV events lasted 3–5 days and had radii ranging from 250 to 1000 km.The duration of HPCV events with larger sizes was longer.About half of the HPCV events moved into(moved out of)the definition region(35°–60°N,115°–145°E),and half initiated(dissipated)within the region.The initial position was close to the western boundary of the definition region,and the final position was mainly near the eastern boundary.The locations associated with the precipitation were mostly concentrated within 2000 km southeast of the HPCV systems,and they were farther from the center in the cold season than in the warm season.

Multi‐objective particle swarm optimisation of complex product change plan considering service performance

Design change is an inevitable part of the product development process.This study proposes an improved binary multi‐objective PSO algorithm guided by problem char-acteristics(P‐BMOPSO)to solve the optimisation problem of complex product change plan considering service performance.Firstly,a complex product multi‐layer network with service performance is established for the first time to reveal the impact of change effect propagation on the product service performance.Secondly,the concept of service performance impact(SPI)is defined by decoupling the impact of strongly associated nodes on the service performance in the process of change affect propagation.Then,a triple‐objective selection model of change nodes is established,which includes the three indicators:SPI degree,change cost,and change time.Furthermore,an integer multi‐objective particle swarm optimisation algorithm guided by problem characteristics is developed to solve the model above.Experimental results on the design change problem of a certain type of Skyworth TV verify the effectiveness of the established optimisation model and the proposed P‐BMOPSO algorithm.

Multi-Objective Optimization with Artificial Neural Network Based Robust Paddy Yield Prediction Model

Agriculture plays a vital role in the food production process that occupies nearly one-third of the total surface of the earth.Rice is propagated from the seeds of paddy and it is a stable food almost used byfifty percent of the total world population.The extensive growth of the human population alarms us to ensure food security and the country should take proper food steps to improve the yield of food grains.This paper concentrates on improving the yield of paddy by predicting the factors that influence the growth of paddy with the help of Evolutionary Computation Techniques.Most of the researchers used to relay on historical records of meteorological parameters to predict the yield of paddy.There is a lack in analyzing the day to day impact of meteorological parameters such as direction of wind,relative humidity,Instant Wind Speed in paddy cultivation.The real time meteorological data collected and analysis the impact of weather parameters from the day of paddy sowing to till the last day of paddy harvesting with regular time series.A Robust Optimized Artificial Neural Network(ROANN)Algorithm with Genetic Algorithm(GA)and Multi Objective Particle Swarm Optimization Algorithm(MOPSO)proposed to predict the factors that to be concentrated by farmers to improve the paddy yield in cultivation.A real time paddy data collected from farmers of Tamilnadu and the meteorological parameters were matched with the cropping pattern of the farmers to construct the database.The input parameters were optimized either by using GA or MOPSO optimization algorithms to reconstruct the database.Reconstructed database optimized by using Artificial Neural Network Back Propagation Algorithm.The reason for improving the growth of paddy was identified using the output of the Neural Network.Performance metrics such as Accuracy,Error Rate etc were used to measure the performance of the proposed algorithm.Comparative analysis made between ANN with GA and ANN with MOPSO to identify the recommendations for improving the paddy yield.

Salient Object Detection Based on a Novel Combination Framework Using the Perceptual Matching and Subjective-Objective Mapping Technologies

The integrity and fineness characterization of non-connected regions and contours is a major challenge for existing salient object detection.The key to address is how to make full use of the subjective and objective structural information obtained in different steps.Therefore,by simulating the human visual mechanism,this paper proposes a novel multi-decoder matching correction network and subjective structural loss.Specifically,the loss pays different attentions to the foreground,boundary,and background of ground truth map in a top-down structure.And the perceived saliency is mapped to the corresponding objective structure of the prediction map,which is extracted in a bottom-up manner.Thus,multi-level salient features can be effectively detected with the loss as constraint.And then,through the mapping of improved binary cross entropy loss,the differences between salient regions and objects are checked to pay attention to the error prone region to achieve excellent error sensitivity.Finally,through tracking the identifying feature horizontally and vertically,the subjective and objective interaction is maximized.Extensive experiments on five benchmark datasets demonstrate that compared with 12 state-of-the-art methods,the algorithm has higher recall and precision,less error and strong robustness and generalization ability,and can predict complete and refined saliency maps.