Numerical parametric study on the influence of location and inclination of large-scale asperities on the shear strength of concreterock interfaces of small buttress dams

When assessing the sliding stability of a concrete dam,the influence of large-scale asperities in the sliding plane is often ignored due to limitations of the analytical rigid body assessment methods provided by current dam assessment guidelines.However,these asperities can potentially improve the load capacity of a concrete dam in terms of sliding stability.Although their influence in a sliding plane has been thoroughly studied for direct shear,their influence under eccentric loading,as in the case of dams,is unknown.This paper presents the results of a parametric study that used finite element analysis(FEA)to investigate the influence of large-scale asperities on the load capacity of small buttress dams.By varying the inclination and location of an asperity located in the concrete-rock interface along with the strength of the rock foundation material,transitions between different failure modes and correlations between the load capacity and the varied parameters were observed.The results indicated that the inclination of the asperity had a significant impact on the failure mode.When the inclinationwas 30and greater,interlocking occurred between the dam and foundation and the governing failure modes were either rupture of the dam body or asperity.When the asperity inclination was significant enough to provide interlocking,the load capacity of the dam was impacted by the strength of the rock in the foundation through influencing the load capacity of the asperity.The location of the asperity along the concrete-rock interface did not affect the failure mode,except for when the asperity was located at the toe of the dam,but had an influence on the load capacity when the failure occurred by rupture of the buttress or by sliding.By accounting for a single large-scale asperity in the concrete-rock interface of the analysed dam,a horizontal load capacity increase of 30%e160%was obtained,depending on the inclination and location of the asperity and the strength of the foundation material.

Microseismic source location using deep learning:A coal mine case study in China

Microseismic source location is crucial for the early warning of rockburst risks.However,the conventional methods face challenges in terms of the microseismic wave velocity and arrival time accuracy.Intelligent techniques,such as the full convolutional neural network(FCNN),can capture spatial information but struggle with complex microseismic sequence.Combining the FCNN with the long shortterm memory(LSTM)network enables better time-series signal classification by integrating multiscale information and is therefore suitable for waveform location.The LSTM-FCNN model does not require extensive data preprocessing and it simplifies the microseismic source location through feature extraction.In this study,we utilized the LSTM-FCNN as a regression learning model to locate the seismic focus.Initially,the method of short-time-average/long-time-average(STA/LTA)arrival time picking was employed to augment spatiotemporal information.Subsequently,oversampling the on-site data was performed to address the issue of data imbalance,and finally,the performance of LSTM-FCNN was tested.Meanwhile,we compared the LSTM-FCNN model with previous deep-learning models.Our results demonstrated remarkable location capabilities with a mean absolute error(MAE)of only 7.16 m.The model can realize swift training and high accuracy,thereby significantly improving risk warning of rockbursts.

A Secure Device Management Scheme with Audio-Based Location Distinction in IoT

Identifying a device and detecting a change in its position is critical for secure devices management in the Internet of Things(IoT).In this paper,a device management system is proposed to track the devices by using audio-based location distinction techniques.In the proposed scheme,traditional cryptographic techniques,such as symmetric encryption algorithm,RSA-based signcryption scheme,and audio-based secure transmission,are utilized to provide authentication,non-repudiation,and confidentiality in the information interaction of the management system.Moreover,an audio-based location distinction method is designed to detect the position change of the devices.Specifically,the audio frequency response(AFR)of several frequency points is utilized as a device signature.The device signature has the features as follows.(1)Hardware Signature:different pairs of speaker and microphone have different signatures;(2)Distance Signature:in the same direction,the signatures are different at different distances;and(3)Direction Signature:at the same distance,the signatures are different in different directions.Based on the features above,amovement detection algorithmfor device identification and location distinction is designed.Moreover,a secure communication protocol is also proposed by using traditional cryptographic techniques to provide integrity,authentication,and non-repudiation in the process of information interaction between devices,Access Points(APs),and Severs.Extensive experiments are conducted to evaluate the performance of the proposed method.The experimental results show that the proposedmethod has a good performance in accuracy and energy consumption.

Using Improved Particle Swarm Optimization Algorithm for Location Problem of Drone Logistics Hub

Drone logistics is a novel method of distribution that will become prevalent.The advantageous location of the logistics hub enables quicker customer deliveries and lower fuel consumption,resulting in cost savings for the company’s transportation operations.Logistics firms must discern the ideal location for establishing a logistics hub,which is challenging due to the simplicity of existing models and the intricate delivery factors.To simulate the drone logistics environment,this study presents a new mathematical model.The model not only retains the aspects of the current models,but also considers the degree of transportation difficulty from the logistics hub to the village,the capacity of drones for transportation,and the distribution of logistics hub locations.Moreover,this paper proposes an improved particle swarm optimization(PSO)algorithm which is a diversity-based hybrid PSO(DHPSO)algorithm to solve this model.In DHPSO,the Gaussian random walk can enhance global search in the model space,while the bubble-net attacking strategy can speed convergence.Besides,Archimedes spiral strategy is employed to overcome the local optima trap in the model and improve the exploitation of the algorithm.DHPSO maintains a balance between exploration and exploitation while better defining the distribution of logistics hub locations Numerical experiments show that the newly proposed model always achieves better locations than the current model.Comparing DHPSO with other state-of-the-art intelligent algorithms,the efficiency of the scheme can be improved by 42.58%.This means that logistics companies can reduce distribution costs and consumers can enjoy a more enjoyable shopping experience by using DHPSO’s location selection.All the results show the location of the drone logistics hub is solved by DHPSO effectively.

Prognostic impact and reasons for variability by tumor location in gastric cancer

BACKGROUND Gastric cancer(GC)is a highly prevalent gastrointestinal tract tumor.Several trials have demonstrated that the location of GC can affect patient prognosis.However,the factors determining tumor location remain unclear.AIM To investigate the tumor location of patients,we went on to study the influencing factors that lead to changes in the location of GC.METHODS A retrospective evaluation was carried out on 3287 patients who underwent gastrectomy for GC in Zhejiang Cancer Hospital.The patients were followed up post-diagnosis and post-gastrectomy.The clinicopathological variables and overall survival of the patients were recorded.By analyzing the location of GC,the tumor location was divided into four categories:“Upper”,“middle”,“lower”,and“total”.Statistical software was utilized to analyze the relationship of each variable with the location of GC.RESULTS A total of 3287 patients were included in this study.The clinicopathological indices of gender,age,serum levels of carcinoembryonic antigen(CEA),carbohydrate antigen(CA19-9)and CA72-4 levels,were significantly associated with tumor location in patients with GC.In addition,there was a strong correlation between GC location and the prognosis of postoperative patients.Specifically,patients with“lower”and“middle”GC demonstrated a better prognosis than those with tumors in other categories.CONCLUSION The five clinicopathological indices of gender,age,CEA,CA19-9 and CA72-4 levels exhibit varying degrees of influence on the tumor location.The tumor location correlates with patient prognosis following surgery.

Dynamic Location Method for Shallow Ocean Bottom Nodes Using the Levenberg-Marquart Algorithm

Ocean bottom node(OBN)data acquisition is the main development direction of marine seismic exploration;it is widely promoted,especially in shallow sea environments.However,the OBN receivers may move several times because they are easily affected by tides,currents,and other factors in the shallow sea environment during long-term acquisition.If uncorrected,then the imaging quality of subsequent processing will be affected.The conventional secondary positioning does not consider the case of multiple movements of the receivers,and the accuracy of secondary positioning is insufficient.The first arrival wave of OBN seismic data in shallow ocean mainly comprises refracted waves.In this study,a nonlinear model is established in accordance with the propagation mechanism of a refracted wave and its relationship with the time interval curve to realize the accurate location of multiple receiver movements.In addition,the Levenberg-Marquart algorithm is used to reduce the influence of the first arrival pickup error and to automatically detect the receiver movements,identifying the accurate dynamic relocation of the receivers.The simulation and field data show that the proposed method can realize the dynamic location of multiple receiver movements,thereby improving the accuracy of seismic imaging and achieving high practical value.

Earthquake relocation using a 3D velocity model and implications on seismogenic faults in the Beijing-Tianjin-Hebei region

To enhance the understanding of the geometry and characteristics of seismogenic faults in the Beijing-Tianjin-Hebei region,we relocated 14805 out of 16063 earthquakes(113°E-120°E,36°N-43°N)that occurred between January 2008 and December 2020 using the double-difference tomography method.Based on the spatial variation in seismicity after relocation,the Beijing-Tianjin-Hebei region can be divided into three seismic zones:Xingtai-Wen'an,Zhangbei-Ninghexi,and Tangshan.(1)The Xingtai-Wen'an Seismic Zone has a northeastsouthwest strike.The depth profile of earthquakes perpendicular to the strike reveals three northeast-striking,southeast-dipping,high-angle deep faults(>10 km depth),including one below the shallow(<10 km depth)listric,northwest-dipping Xinghe fault in the Xingtai region.Two additional deep faults in the Wen'an region are suggested to be associated with the 2006 M 5.1 Wen'an Earthquake and the 1967 M 6.3 Dacheng earthquake;(2)The Zhangbei-Ninghexi Seismic Zone is oriented north-northwest.Multiple northeast-striking faults(10-20 km depth),inferred from the earthquake-intensive zones,exist beneath the shallow(<10 km depth)Xiandian Fault,Xiaotangshan Fault,Huailai-Zhuolu Basin North Fault,Yangyuan Basin Fault and Yanggao Basin North Fault;(3)In the Tangshan Seismic Zone,earthquakes are mainly concentrated near the northeast-striking Tangshan-Guye Fault,Lulong Fault,and northwest-striking Luanxian-Laoting Fault.An inferred north-south-oriented blind fault is present to the north of the Tangshan-Guye Fault.The 1976 M 7.8 Tangshan earthquake occurred at the junction of a shallow northwest-dipping fault and a deep southeast-dipping fault.This study emphasizes that earthquakes in the region are primarily associated with deep blind faults.Some deep blind faults have different geometries compared to shallow faults,suggesting a complex fault system in the region.Overall,this research provides valuable insights into the seismogenic faults in the Beijing–Tianjin–Hebei region.Further studies and monitoring of these faults are essential for earthquake mitigation efforts in this region.

A Simple and Effective Surface Defect Detection Method of Power Line Insulators for Difficult Small Objects

Insulator defect detection plays a vital role in maintaining the secure operation of power systems.To address the issues of the difficulty of detecting small objects and missing objects due to the small scale,variable scale,and fuzzy edge morphology of insulator defects,we construct an insulator dataset with 1600 samples containing flashovers and breakages.Then a simple and effective surface defect detection method of power line insulators for difficult small objects is proposed.Firstly,a high-resolution featuremap is introduced and a small object prediction layer is added so that the model can detect tiny objects.Secondly,a simplified adaptive spatial feature fusion(SASFF)module is introduced to perform cross-scale spatial fusion to improve adaptability to variable multi-scale features.Finally,we propose an enhanced deformable attention mechanism(EDAM)module.By integrating a gating activation function,the model is further inspired to learn a small number of critical sampling points near reference points.And the module can improve the perception of object morphology.The experimental results indicate that concerning the dataset of flashover and breakage defects,this method improves the performance of YOLOv5,YOLOv7,and YOLOv8.In practical application,it can simply and effectively improve the precision of power line insulator defect detection and reduce missing detection for difficult small objects.

Location Prediction from Social Media Contents using Location Aware Attention LSTM Network

Location prediction in social media,a growing research field,employs machine learning to identify users' locations from their online activities.This technology,useful in targeted advertising and urban planning,relies on natural language processing to analyze social media content and understand the temporal dynamics and structures of social networks.A key application is predicting a Twitter user's location from their tweets,which can be challenging due to the short and unstructured nature of tweet text.To address this challenge,the research introduces a novel machine learning model called the location-aware attention LSTM(LAA-LSTM).This hybrid model combines a Long Short-Term Memory(LSTM) network with an attention mechanism.The LSTM is trained on a dataset of tweets,and the attention network focuses on extracting features related to latitude and longitude,which are crucial for pinpointing the location of a user's tweet.The result analysis shows approx.10% improvement in accuracy over other existing machine learning approaches.

A Multi-Objective Optimization for Locating Maintenance Stations and Operator Dispatching of Corrective Maintenance

In this study,we introduce a novel multi-objective optimization model tailored for modern manufacturing,aiming to mitigate the cost impacts of operational disruptions through optimized corrective maintenance.Central to our approach is the strategic placement of maintenance stations and the efficient allocation of personnel,addressing a crucial gap in the integration of maintenance personnel dispatching and station selection.Our model uniquely combines the spatial distribution of machinery with the expertise of operators to achieve a harmonious balance between maintenance efficiency and cost-effectiveness.The core of our methodology is the NSGA Ⅲ+Dispatch,an advanced adaptation of the Non-Dominated Sorting Genetic Algorithm Ⅲ(NSGA-Ⅲ),meticulously designed for the selection of maintenance stations and effective operator dispatching.This method integrates a comprehensive coding process,crossover operator,and mutation operator to efficiently manage multiple objectives.Rigorous empirical testing,including a detailed analysis from a taiwan region electronic equipment manufacturer,validated the effectiveness of our approach across various scenarios of machine failure frequencies and operator configurations.The findings reveal that the proposed model significantly outperforms current practices by reducing response times by up to 23%in low-frequency and 28.23%in high-frequency machine failure scenarios,leading to notable improvements in efficiency and cost reduction.Additionally,it demonstrates significant improvements in oper-ational efficiency,particularly in selective high-frequency failure contexts,while ensuring substantial manpower cost savings without compromising on operational effectiveness.This research significantly advances maintenance strategies in production environments,providing the manufacturing industry with practical,optimized solutions for diverse machine malfunction situations.Furthermore,the methodologies and principles developed in this study have potential applications in various other sectors,including healthcare,transportation,and energy,where maintenance efficiency and resource optimization are equally critical.

Optimal Configuration of Fault Location Measurement Points in DC Distribution Networks Based on Improved Particle Swarm Optimization Algorithm

The escalating deployment of distributed power sources and random loads in DC distribution networks hasamplified the potential consequences of faults if left uncontrolled. To expedite the process of achieving an optimalconfiguration of measurement points, this paper presents an optimal configuration scheme for fault locationmeasurement points in DC distribution networks based on an improved particle swarm optimization algorithm.Initially, a measurement point distribution optimization model is formulated, leveraging compressive sensing.The model aims to achieve the minimum number of measurement points while attaining the best compressivesensing reconstruction effect. It incorporates constraints from the compressive sensing algorithm and networkwide viewability. Subsequently, the traditional particle swarm algorithm is enhanced by utilizing the Haltonsequence for population initialization, generating uniformly distributed individuals. This enhancement reducesindividual search blindness and overlap probability, thereby promoting population diversity. Furthermore, anadaptive t-distribution perturbation strategy is introduced during the particle update process to enhance the globalsearch capability and search speed. The established model for the optimal configuration of measurement points issolved, and the results demonstrate the efficacy and practicality of the proposed method. The optimal configurationreduces the number of measurement points, enhances localization accuracy, and improves the convergence speedof the algorithm. These findings validate the effectiveness and utility of the proposed approach.

Multi-Branch Fault Line Location Method Based on Time Difference Matrix Fitting

The distribution network exhibits complex structural characteristics,which makes fault localization a challenging task.Especially when a branch of the multi-branch distribution network fails,the traditional multi-branch fault location algorithm makes it difficult to meet the demands of high-precision fault localization in the multi-branch distribution network system.In this paper,the multi-branch mainline is decomposed into single branch lines,transforming the complex multi-branch fault location problem into a double-ended fault location problem.Based on the different transmission characteristics of the fault-traveling wave in fault lines and non-fault lines,the endpoint reference time difference matrix S and the fault time difference matrix G were established.The time variation rule of the fault-traveling wave arriving at each endpoint before and after a fault was comprehensively utilized.To realize the fault segment location,the least square method was introduced.It was used to find the first-order fitting relation that satisfies the matching relationship between the corresponding row vector and the first-order function in the two matrices,to realize the fault segment location.Then,the time difference matrix is used to determine the traveling wave velocity,which,combined with the double-ended traveling wave location,enables accurate fault location.

Adaptive Resource Allocation Algorithm for 5G Vehicular Cloud Communication

The current resource allocation in 5G vehicular networks for mobile cloud communication faces several challenges,such as low user utilization,unbalanced resource allocation,and extended adaptive allocation time.We propose an adaptive allocation algorithm for mobile cloud communication resources in 5G vehicular networks to address these issues.This study analyzes the components of the 5G vehicular network architecture to determine the performance of different components.It is ascertained that the communication modes in 5G vehicular networks for mobile cloud communication include in-band and out-of-band modes.Furthermore,this study analyzes the single-hop and multi-hop modes in mobile cloud communication and calculates the resource transmission rate and bandwidth in different communication modes.The study also determines the scenario of one-way and two-way vehicle lane cloud communication network connectivity,calculates the probability of vehicle network connectivity under different mobile cloud communication radii,and determines the amount of cloud communication resources required by vehicles in different lane scenarios.Based on the communication status of users in 5G vehicular networks,this study calculates the bandwidth and transmission rate of the allocated channels using Shannon’s formula.It determines the adaptive allocation of cloud communication resources,introduces an objective function to obtain the optimal solution after allocation,and completes the adaptive allocation process.The experimental results demonstrate that,with the application of the proposed method,the maximum utilization of user communication resources reaches approximately 99%.The balance coefficient curve approaches 1,and the allocation time remains under 2 s.This indicates that the proposed method has higher adaptive allocation efficiency.

How Does a University’s Computer Science Strength and Location Impact Its Total ChatGPT News?

As AI, starting with ChatGPT has become increasingly prevalent in academic discussions, school especially, colleges have become hotspots of AI activities and debates. Colleges have the responsibility of addressing not only the academic, integrity-based concerns of students using AI for their homework, but also as the forebearers of new learning and technology, how AI will change their students’ futures and careers. In this study, we will explore the different factors, such as Computer Science Score and location, that might affect how much a college discusses AI, ChatGPT specifically. To demonstrate the validity of our research, we used self-collected data with our methods detailed below.

A Novel Tensor Decomposition-Based Efficient Detector for Low-Altitude Aerial Objects With Knowledge Distillation Scheme

Unmanned aerial vehicles(UAVs) have gained significant attention in practical applications, especially the low-altitude aerial(LAA) object detection imposes stringent requirements on recognition accuracy and computational resources. In this paper, the LAA images-oriented tensor decomposition and knowledge distillation-based network(TDKD-Net) is proposed,where the TT-format TD(tensor decomposition) and equalweighted response-based KD(knowledge distillation) methods are designed to minimize redundant parameters while ensuring comparable performance. Moreover, some robust network structures are developed, including the small object detection head and the dual-domain attention mechanism, which enable the model to leverage the learned knowledge from small-scale targets and selectively focus on salient features. Considering the imbalance of bounding box regression samples and the inaccuracy of regression geometric factors, the focal and efficient IoU(intersection of union) loss with optimal transport assignment(F-EIoU-OTA)mechanism is proposed to improve the detection accuracy. The proposed TDKD-Net is comprehensively evaluated through extensive experiments, and the results have demonstrated the effectiveness and superiority of the developed methods in comparison to other advanced detection algorithms, which also present high generalization and strong robustness. As a resource-efficient precise network, the complex detection of small and occluded LAA objects is also well addressed by TDKD-Net, which provides useful insights on handling imbalanced issues and realizing domain adaptation.

Management of Penetrating Cranioencephalic Trauma Caused by Sharp Metal Objects—Therapeutic and Evolutionary Aspects: 12 Cases at the Renaissance University Hospital in N’Djamena

Introduction: Cranioencephalic trauma caused by bladed weapons is rare, and that caused by sharp objects is exceptional. The aim of our study was to describe the clinical, therapeutic and evolutionary aspects. Materials and method: This was a descriptive and analytical study over a 48-month period at CHU la Renaissance from January 1, 2018 to December 31, 2021, concerning patients admitted for penetrating cranioencephalic trauma by pointed object. Results: Twelve cases, all male, of penetrating cranioencephalic sharp-force trauma were identified. The mean age was 34 ± 7 years, with extremes of 11 and 60 years. Farmers and herders accounted for 31% and 25% of cases respectively. The average admission time was 47 hours. Brawls were the circumstances of occurrence in 81.2% of cases. Knives (33%), arrows (25%) and iron bars (16.6%) were the objects used. Altered consciousness was present in 43.8% of cases, and focal deficit in 50%. Scannographic lesions were fracture and/or embarrhment (12 cases), intra-parenchymal haematomas (6 cases) and presence of object in place (4 cases). Surgery was performed in 11 patients. Postoperative outcome was favorable in 9 patients. After 12 months, 2 patients were declared unfit. Conclusion: Penetrating head injuries caused by sharp objects are common in Chad. Urgent surgery can prevent disabling after-effects.

Unknown DDoS Attack Detection with Fuzzy C-Means Clustering and Spatial Location Constraint Prototype Loss

Since its inception,the Internet has been rapidly evolving.With the advancement of science and technology and the explosive growth of the population,the demand for the Internet has been on the rise.Many applications in education,healthcare,entertainment,science,and more are being increasingly deployed based on the internet.Concurrently,malicious threats on the internet are on the rise as well.Distributed Denial of Service(DDoS)attacks are among the most common and dangerous threats on the internet today.The scale and complexity of DDoS attacks are constantly growing.Intrusion Detection Systems(IDS)have been deployed and have demonstrated their effectiveness in defense against those threats.In addition,the research of Machine Learning(ML)and Deep Learning(DL)in IDS has gained effective results and significant attention.However,one of the challenges when applying ML and DL techniques in intrusion detection is the identification of unknown attacks.These attacks,which are not encountered during the system’s training,can lead to misclassification with significant errors.In this research,we focused on addressing the issue of Unknown Attack Detection,combining two methods:Spatial Location Constraint Prototype Loss(SLCPL)and Fuzzy C-Means(FCM).With the proposed method,we achieved promising results compared to traditional methods.The proposed method demonstrates a very high accuracy of up to 99.8%with a low false positive rate for known attacks on the Intrusion Detection Evaluation Dataset(CICIDS2017)dataset.Particularly,the accuracy is also very high,reaching 99.7%,and the precision goes up to 99.9%for unknown DDoS attacks on the DDoS Evaluation Dataset(CICDDoS2019)dataset.The success of the proposed method is due to the combination of SLCPL,an advanced Open-Set Recognition(OSR)technique,and FCM,a traditional yet highly applicable clustering technique.This has yielded a novel method in the field of unknown attack detection.This further expands the trend of applying DL and ML techniques in the development of intrusion detection systems and cybersecurity.Finally,implementing the proposed method in real-world systems can enhance the security capabilities against increasingly complex threats on computer networks.

Patterns of Interactions of the Complex City System:Emotional Urban Objects as Triggering Agents-A Secondary Publication

This article presents an analysis of the patterns of interactions resulting from the positive and negative emotional events that occur in cities,considering them as complex systems.It explores,from the imaginaries,how certain urban objects can act as emotional agents and how these events affect the urban system as a whole.An adaptive complex systems perspective is used to analyze these patterns.The results show patterns in the processes and dynamics that occur in cities based on the objects that affect the emotions of the people who live there.These patterns depend on the characteristics of the emotional charge of urban objects,but they can be generalized in the following process:(1)immediate reaction by some individuals;(2)emotions are generated at the individual level which begins to generalize,permuting to a collective emotion;(3)a process of reflection is detonated in some individuals from the reading of collective emotions;(4)integration/significance in the community both at the individual and collective level,on the concepts,roles and/or functions that give rise to the process in the system.Therefore,it is clear that emotions play a significant role in the development of cities and these aspects should be considered in the design strategies of all kinds of projects for the city.Future extensions of this work could include a deeper analysis of specific emotional events in urban environments,as well as possible implications for urban policy and decision making.

Wireless Location Determination for Mobile Objects Based on GSM in Intelligent Transportation Systems

The mobile object (MO) location determination technologies which can be used in intelligent transportation system (ITS) are studied in this paper. The principles and characteristics of wireless location determination technologies are introduced and the characteristics of GSM useful for location determination are also summarized. An experimental positioning system based on GSM is proposed, and the architecture is described. TOA method based on GSM signals and TDOA method are used in the experimental system. Moreover, the methods are simulated. The performance of the positioning methods is assessed in the simulation environment, and the accuracy for 67% mobile stations (MS) is 70m in urban areas.

Real-Time Recognition and Location of Indoor Objects

Object recognition and location has always been one of the research hotspots in machine vision.It is of great value and significance to the development and application of current service robots,industrial automation,unmanned driving and other fields.In order to realize the real-time recognition and location of indoor scene objects,this article proposes an improved YOLOv3 neural network model,which combines densely connected networks and residual networks to construct a new YOLOv3 backbone network,which is applied to the detection and recognition of objects in indoor scenes.In this article,RealSense D415 RGB-D camera is used to obtain the RGB map and depth map,the actual distance value is calculated after each pixel in the scene image is mapped to the real scene.Experiment results proved that the detection and recognition accuracy and real-time performance by the new network are obviously improved compared with the previous YOLOV3 neural network model in the same scene.More objects can be detected after the improvement of network which cannot be detected with the YOLOv3 network before the improvement.The running time of objects detection and recognition is reduced to less than half of the original.This improved network has a certain reference value for practical engineering application.