Potential Deformation and Its Application to the Diagnosis of Heavy Precipitation in Mesoscale Convective Systems

Many observational studies have shown that deformation, like vertical vorticity and divergence, is closely related to the occurrence and distribution of strong precipitation. In this paper, to involve deformation in precipitation diagnosis, a new parameter called potential deformation（PD） is derived and then applied to precipitation detection within a simulated mesoscale convective system（MCS）. It is shown that PD includes both stretching deformation and shearing deformation and shares similar characteristics with deformation insofar as it does not change with the rotating coordinate. Diagnosis of the simulated MCS reveals that PD performs well in tracing the MCS＇ precipitation. In terms of their distributional pattern, the large-value areas of PD are similar to the precipitation in the different development stages of the MCS. A detailed analysis of the physical processes contained within the PD shows that it can reflect the three-dimensional moisture variation,vertical wind shear and wind deformation within the MCS. These structures are usually a comprehensive reflection of the characteristics of the surface cold pool, rear inflow jet, downward cold air flow and upward warm moist flow within the precipitating convective cells. For this reason, the PD shows much stronger anomalies in the precipitating atmosphere than the non-precipitating atmosphere, which implies considerable potential for its application in detecting heavy precipitation within MCSs.

Testing the transfer functions for the Geonor T-200B and Chinese standard precipitation gauge in the central Qinghai-Tibet Plateau

Accurately measuring precipitation is integral for understanding water cycle processes and assessing climate change in the Qinghai–Tibet Plateau(QTP).The Geonor T-200B weighing precipitation gauge with a single Alter shield(Geonor)and the Chinese standard precipitation gauge(CSPG)are widely used for measuring precipitation in the QTP.However,their measurements need to be adjusted for wetting loss,evaporation loss and windinduced undercatch.Four existing transfer functions for adjusting the Geonor-recorded and three transfer functions for adjusting the CSPG-recorded precipitation at hourly,daily or event scale has been proposed based on the precipitation intercomparison experiments conducted at a single site in different regions.Two latest transfer functions for the Geonor(which are referred to as K2017a and K2017b)at the half-hour time scale based on the precipitation intercomparison experiments at multiple stations in the northern hemisphere were provided in the World Meteorological Organization Solid Precipitation Intercomparison Experiment.However,the applicability of these transfer functions in the QTP has not been evaluated.Therefore,the current study carried out a precipitation measurement intercomparison experiment between August 2018 and September 2020 at a site in Beiluhe in central QTP.The performance of these transfer functions at this site was also evaluated on the basis of mean bias(MB),root mean squared error(RMSE)and relative total catch(RTC).The results are as follows:First,the unadjusted RTC values of the Geonor for rain,mixed(snow mixed with rain),snow and hail are 92.06%,85.35%,64.11% and 91.82%,respectively,and the unadjusted RTC values of the CSPG for the same precipitation types are 92.59%,81.32%,46.43% and 95.56%,respectively.Second,K2017a has the most accurate adjustment results for the Geonor-recorded snow and mixed precipitation at the half-hour time scale,and the post-adjustment RTC values increased to 98.25% and 98.23%,respectively.M2007e,an event-based transfer function,was found to have the most accurate adjustment results for the Geonorrecorded snow precipitation at the event scale,and the post-adjustment RTC value increased to 96.36%.Third,the existing transfer functions for CSPG underestimate snowfall,while overestimating rainfall.Fourth,hail is a significant precipitation type in central QTP.The catch efficiency of hail precipitation and the temperature when hail precipitation occurs are close to those of rain;moreover,the transfer functions for rain are suitable for hail as well.

Comparative Analysis of Automatic Observation Data of DSG3 Precipitation Phenomenon Instrument and Manual Observation Data

The observation data collected by DSG3 precipitation phenomenon observation instrument and the manual parallel observation data in 5 stations of Gansu Province from January 2018 to December 2019 were compared and analyzed.The results show that the missing observation rate of the observation instrument was 0%,and the performance of the equipment was good;the empty forecast rate of drizzle was the highest;the false forecast rate of hail was the highest,and the accuracy of automatic observation records was relatively poor;the capture rate and empty forecast rate of rain and snow were higher,while their false forecast rate and missing forecast rate were lower.The capture rate and missing forecast rate of sleet were higher,and its missing forecast rate was low;the accuracy of automatic observation was better.It shows that the empty forecast and false forecast of DSG3 precipitation phenomenon observation instrument mainly occurred in weak precipitation phenomena,and the recognition of drizzle and hail was poor.

Precipitation behavior of titanium nitride on a primary inclusion particle during solidification of bearing steel

Titanium nitride precipitation on a primary inclusion particle during solidification of bearing steel has been tracked by varying temperature in a confocal scanning violet laser microscope.Upon precipitation,an obvious growth of titanium nitride on a primary inclusion particle was observed due to the rapid solute diffusion in liquid steel.The onset of titanium nitride precipitation did not change with primary inclusion particle size,but the time of growth was greater for a smaller primary inclusion particle.Meanwhile,the particle size displayed little influence on the total precipitated amount of titanium nitride on it under the same conditions.At the later period of solidification,almost no change occurred in inclusion size,but the inclusion shape varied from circle to almost square in two-dimension,or cubic in three-dimension,to attain the equilibrium with steel.

The dynamic forecast method of convective vorticity vector

In this paper we introduce the convective vorticity vector and its application in the forecast and diagnosis of rainstorm.Convective vorticity vector is a parameter of vector field,different from scalar field,it contains more important information of physical quantities,so it could not be replaced.Considering the irresistible importance of vector field we will introduce the theory of vector field and its dynamic forecast method.With the convective vorticity vector and its vertical component's tendency equation,diagnostic analysis on the heavy-rainfall event caused by landfall typhoon“Morakot”in the year 2009 is conducted.The result shows that,the abnormal values of convective vorticity vector always changes with the development of the observed precipitation region,and their horizontal distribution is quite similar.Analysis reveals a certain correspondence between the convective vorticity vector and the observed 6-h accumulated surface rainfall,they are significantly related.The convective vorticity vector is capable of describing the typical vertical structure of dynamical and thermodynamic fields of precipitation system,so it is closely related to the occurrence and development of precipitation system and could have certain relation with the surface rainfall regions.