期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
A Method to Obtain Auger Recombination Coefficient in an InGaN-Based Blue Light-Emitting Diode
1
作者 汪莱 孟骁 +9 位作者 Jung-Hoon Song Tae-Soo Kim Seung-Young Lim 郝智彪 罗毅 孙长征 韩彦军 熊兵 王健 李洪涛 《Chinese Physics Letters》 SCIE CAS CSCD 2017年第1期107-109,共3页
We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obt... We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obtained Auger recombination coefficient is 1.0x10(-31) cm(6)s(-1) in the present sample, which contributes slightly to efficiency droop effect. 展开更多
关键词 InGaN A method to Obtain Auger Recombination Coefficient in an InGaN-Based Blue Light-Emitting Diode CIE
下载PDF
Comparison of K_(IC) Values for SiC Whisker Reinforced Ceramic Composites Obtained by Using Various Methods
2
作者 Tingquan LEI Guangyong LIN +1 位作者 Shuangxi WANG and Yu ZHOU (Dept. of Metals and Technology, Harbin Institute of Technology, Harbin, 150001, China)(To whom correspondence should be addressed) 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1994年第5期331-340,共10页
The fracture toughness (KIC) values determined by indentation microfracture method (IM ) for SiC whisker reinforced Al2O3 and ZrO2 based composites were calculated with different IM equations and compared with those o... The fracture toughness (KIC) values determined by indentation microfracture method (IM ) for SiC whisker reinforced Al2O3 and ZrO2 based composites were calculated with different IM equations and compared with those obtained by singte edge notched beam (SENB) technique. Experimental results show that the KIC (IM) values calculated with different equations are quite different one from another. For composites without phase transformable components the KIC (IM) and KIC (SENB) values are practically on the same level, but for composites with phase transformable components (partially stabilized zirconia) the KIC (SENB) values are always higher than KIC (IM). This is because that the IM method can not reveal sensitively the toughening effect due to dynamic t-m transformation of ZrO2 as the SENB method does. The accuracy of the IM method depends on the Suitability of the IM equations and was evaluated for the materials used in this investigation. Two new IM equations are suggested with which the KIC (IM ) values can be obtained very close to KIC (SENB) values for composites having phase transformable components. 展开更多
关键词 SiC Values for SiC Whisker Reinforced Ceramic Composites Obtained by Using Various methods Comparison of K IC
下载PDF
A new method for obtaining three-dimensional eigenrays
3
作者 DavidFarmer 《Chinese Journal of Acoustics》 1992年第4期317-320,共4页
This report describes a new method, the self-searching method, to find cigenrays in an ocean where there is a three-dimensional sound speed perturbation blob on a uniform sound speed background. Compared with the trad... This report describes a new method, the self-searching method, to find cigenrays in an ocean where there is a three-dimensional sound speed perturbation blob on a uniform sound speed background. Compared with the traditional shooting method, this method can reduce the number of ray calculations by about two orders of magnitude, and an eigcnray can be found by computer program without manual intervention. 展开更多
关键词 A new method for obtaining three-dimensional eigenrays
原文传递
AN INVERSION METHOD FOR OBTAINING BOTTOM REFLECTION LOSS
4
作者 WANG Qin And ZHANG Renhe(Shanghai Acoustics Laboratory, Acadenia Sinica) 《Chinese Journal of Acoustics》 1989年第1期57-64,共8页
A method for the inversion of the transmission losses for the bottom reflection loss is proposed on the basis of the theory of the smooth- averaged sound field. The procedure of the inversion is based on the criterion... A method for the inversion of the transmission losses for the bottom reflection loss is proposed on the basis of the theory of the smooth- averaged sound field. The procedure of the inversion is based on the criterion of the least square error in the transmission losses between calculation and measurement. By using the Gauss - Newton iterative approach, the non - linear least square aloqrithm is equivalent to solving a sequence of lineared least square problems. The physical causes of the instability of the inversion problem are discussed and the stability is improved by means of the Levenberg- Marquardt method. Both numerical simulations with noise and experimental results show that the inversion for the bottom reflection loss of small grazing angle has high precision and the certain perturbation in the measured transmission losses does not lead to serious deviation in the inversion result of the bottom reflection loss. 展开更多
关键词 AN INVERSION method FOR obtaining BOTTOM REFLECTION LOSS
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部