Problems due to the taste and odor in drinking water are common in treatment facilities around the world. Taste and odor are perceived by the public as the primary indicators of the safely and acceptability of drinkin...Problems due to the taste and odor in drinking water are common in treatment facilities around the world. Taste and odor are perceived by the public as the primary indicators of the safely and acceptability of drinking water and are mainly caused by the presence of two semi-volatile compounds - 2-methyl isobomeol （MIB） and geosmin. A review of these two taste and odor causing compounds in drinking water is presented. The sources for the formation of these compounds in water are discussed alongwith the health and regulatory implications. The recent developments in the analysis of MIB/geosmin in water which have allowed for rapid measurements in the nanogram per liter concentrations are also discussed. This review focuses on the relevant treatment alternatives, that are described in detail with emphasis on their respective advantages and problems associated with their implementation in a full- scale facility. Conventional treatment processes in water treatment plants, such as coagulation, sedimentation and chlorination have been found to be ineffective for removal of M1B/geosmin. Studies have shown powdered activated carbon, ozonation and biofiltration to be effective in treatment of these two compounds. Although some of these technologies are more effective and show more promise than the others, much work remains to be done to optimize these technologies so that they can be retrofitted or installed with minimal impact on the overall operation and effectiveness of the treatment system.展开更多
Taste and odor （T＆O） problems in drinking water frequently occur because of many compounds present in the water, of which trans-1,10-dimethyl-trans-9-decalol （geosrnin） and 2-methylisoborneol （MIB） are well-kno...Taste and odor （T＆O） problems in drinking water frequently occur because of many compounds present in the water, of which trans-1,10-dimethyl-trans-9-decalol （geosrnin） and 2-methylisoborneol （MIB） are well-known. In this study, a fast and effective method was established for simultaneous determination of 10 T＆O compounds, including geosmin, MIB, 2,4,6-trichloroanisole （TCA）, 2-methylbenzofuran, 2-isopropyl-3-methoxypyrazine （IPMP）, 2-isobutyl-3-methoxypyrazine （IBMP）, cis-3-hexenyl acetate, trans,trans-2,4-heptadienal, trans, cis-2,6-nonadienal, and trans-2-decenal in water samples by headspace solid-phase microextraction （SPME） coupled with gas chromatography-mass spectrometry. An orthogonal array experimental design was used to optimize the effects of SPME fiber, extraction temperature, stirring rate, NaC1 content, extraction time, and desorption time. The limits of detection ranged from 0.1 to 73 ng/L were lower than or close to the odor threshold concentrations （OTCs）. All the 10 T＆O compounds were detected in the 14 water samples including surface water, treatment process water and tap water, taken from a waterworks in Lianyungang City, China. MIB and geosmin were detected in most samples at low concentration. Six T＆O compounds （IPMP, IBMP, trans,cis-2,6-nonadienal, 2-methylbenzofuran, trans-2-decenal, and TCA） were effectively decreased in water treatment process （sedimentation and filtration） that is different from cis-3-hexenyl acetate, MIB and geosmin. It is noted that the TCA concentrations at 15.9-122.3 ng/L and the trans,cis-2,6-nonadienal concentrations at 79.9-190.1 ng/L were over 10 times higher than their OTCs in tap water. The variation of the analytes in the all water samples, especially distribution system indicated that distribution system cannot be ignored as a T＆O compounds source.展开更多
In this paper, a method using solid-phase extraction （SPE） and gas chromatography-mass spectro- metry （GC-MS） was developed to simultaneously analyze five taste and odor compounds in surface water, i.e., 2- methyl...In this paper, a method using solid-phase extraction （SPE） and gas chromatography-mass spectro- metry （GC-MS） was developed to simultaneously analyze five taste and odor compounds in surface water, i.e., 2- methylisoborneol （2-MIB）, 2,4,6-trichloroanisole （TCA）, 2-isopropyl-3-methoxy pyrazine （IPMP）, 2-isobutyl-3- methoxy pyrazine （IBMP）, and trans-l,lO-dimethyl- trans-9-decalol （geosmin, GSM）. The mass spectrometry was operated in selective ion monitoring （SIM） mode. Three kinds of SPE columns and three eluting solvents were compared, the C 18 column was chosen as optimum SPE column, and methanol was chosen as the optimum eluting solvent. It was found that the method showed good linearity in the range of 1-200 ng.L^-1 and gave detection limits of 0.5 1.5 ng.L^-1 for individual compounds. Good recoveries （93.5%-108%） and relative standard deviations （1.58%-7.31%） were also obtained. Additionally, concentrations of these taste and odor compounds in Jinan＇s surface and drinking water were analyzed by applying this method, and the results showed that GSM and 2-MIB were the dominant taste and odor compounds in Jinan＇s raw water.展开更多
文摘Problems due to the taste and odor in drinking water are common in treatment facilities around the world. Taste and odor are perceived by the public as the primary indicators of the safely and acceptability of drinking water and are mainly caused by the presence of two semi-volatile compounds - 2-methyl isobomeol （MIB） and geosmin. A review of these two taste and odor causing compounds in drinking water is presented. The sources for the formation of these compounds in water are discussed alongwith the health and regulatory implications. The recent developments in the analysis of MIB/geosmin in water which have allowed for rapid measurements in the nanogram per liter concentrations are also discussed. This review focuses on the relevant treatment alternatives, that are described in detail with emphasis on their respective advantages and problems associated with their implementation in a full- scale facility. Conventional treatment processes in water treatment plants, such as coagulation, sedimentation and chlorination have been found to be ineffective for removal of M1B/geosmin. Studies have shown powdered activated carbon, ozonation and biofiltration to be effective in treatment of these two compounds. Although some of these technologies are more effective and show more promise than the others, much work remains to be done to optimize these technologies so that they can be retrofitted or installed with minimal impact on the overall operation and effectiveness of the treatment system.
基金supported by the National Natural Science Foundation of China(No.21007077,51290283)the Ministry of Water Resources’ Special Funds for Scientific Research on Public Causes(No.201201032)
文摘Taste and odor （T＆O） problems in drinking water frequently occur because of many compounds present in the water, of which trans-1,10-dimethyl-trans-9-decalol （geosrnin） and 2-methylisoborneol （MIB） are well-known. In this study, a fast and effective method was established for simultaneous determination of 10 T＆O compounds, including geosmin, MIB, 2,4,6-trichloroanisole （TCA）, 2-methylbenzofuran, 2-isopropyl-3-methoxypyrazine （IPMP）, 2-isobutyl-3-methoxypyrazine （IBMP）, cis-3-hexenyl acetate, trans,trans-2,4-heptadienal, trans, cis-2,6-nonadienal, and trans-2-decenal in water samples by headspace solid-phase microextraction （SPME） coupled with gas chromatography-mass spectrometry. An orthogonal array experimental design was used to optimize the effects of SPME fiber, extraction temperature, stirring rate, NaC1 content, extraction time, and desorption time. The limits of detection ranged from 0.1 to 73 ng/L were lower than or close to the odor threshold concentrations （OTCs）. All the 10 T＆O compounds were detected in the 14 water samples including surface water, treatment process water and tap water, taken from a waterworks in Lianyungang City, China. MIB and geosmin were detected in most samples at low concentration. Six T＆O compounds （IPMP, IBMP, trans,cis-2,6-nonadienal, 2-methylbenzofuran, trans-2-decenal, and TCA） were effectively decreased in water treatment process （sedimentation and filtration） that is different from cis-3-hexenyl acetate, MIB and geosmin. It is noted that the TCA concentrations at 15.9-122.3 ng/L and the trans,cis-2,6-nonadienal concentrations at 79.9-190.1 ng/L were over 10 times higher than their OTCs in tap water. The variation of the analytes in the all water samples, especially distribution system indicated that distribution system cannot be ignored as a T＆O compounds source.
文摘In this paper, a method using solid-phase extraction （SPE） and gas chromatography-mass spectro- metry （GC-MS） was developed to simultaneously analyze five taste and odor compounds in surface water, i.e., 2- methylisoborneol （2-MIB）, 2,4,6-trichloroanisole （TCA）, 2-isopropyl-3-methoxy pyrazine （IPMP）, 2-isobutyl-3- methoxy pyrazine （IBMP）, and trans-l,lO-dimethyl- trans-9-decalol （geosmin, GSM）. The mass spectrometry was operated in selective ion monitoring （SIM） mode. Three kinds of SPE columns and three eluting solvents were compared, the C 18 column was chosen as optimum SPE column, and methanol was chosen as the optimum eluting solvent. It was found that the method showed good linearity in the range of 1-200 ng.L^-1 and gave detection limits of 0.5 1.5 ng.L^-1 for individual compounds. Good recoveries （93.5%-108%） and relative standard deviations （1.58%-7.31%） were also obtained. Additionally, concentrations of these taste and odor compounds in Jinan＇s surface and drinking water were analyzed by applying this method, and the results showed that GSM and 2-MIB were the dominant taste and odor compounds in Jinan＇s raw water.
