Geochemical and Isotopic Techniques Constraints on the Origin,Evolution,and Residence Time of Low-enthalpy Geothermal Water in Western Wugongshan,SE China

Geothermal resources are increasingly gaining attention as a competitive,clean energy source to address the energy crisis and mitigate climate change.The Wugongshan area,situated in the southeast coast geothermal belt of China,is a typical geothermal anomaly and contains abundant medium-and low-temperature geothermal resources.This study employed hydrogeochemical and isotopic techniques to explore the cyclic evolution of geothermal water in the western Wugongshan region,encompassing the recharge origin,water-rock interaction mechanisms,and residence time.The results show that the geothermal water in the western region of Wugongshan is weakly alkaline,with low enthalpy and mineralization levels.The hydrochemistry of geothermal waters is dominated by Na-HCO_(3)and Na-SO_(4),while the hydrochemistry types of cold springs are all Na-HCO_(3).The hydrochemistry types of surface waters and rain waters are NaHCO_(3)or Ca-HCO_(3).The δD and δ^(18)O values reveal that the geothermal waters are recharged by atmospheric precipitation at an altitude between 550.0 and 1218.6 m.Molar ratios of maj or solutes and isotopic compositions of^(87)Sr/^(86)Sr underscore the significant role of silicate weathering,dissolution,and cation exchange in controlling geothermal water chemistry.Additionally,geothermal waters experienced varying degrees of mixing with cold water during their ascent.Theδ^(13)C values suggest that the primary sources of carbon in the geothermal waters were biogenic and organic.Theδ^(34)S value suggests that the sulfates in geothermal water originate from sulfide minerals in the surrounding rock.Age dating using 3H and^(14)C isotopes suggests that geothermal waters have a residence time exceeding 1 kaBP and undergo a long-distance cycling process.

Particle residence time distribution and axial dispersion coefficient in a pressurized circulating fluidized bed by using multiphase particle-in-cell simulation

The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.

Associations between residence and cognitive function among Chinese older adults: the mediating role of leisure activity

Background:Cognitive function is a current research hotspot,residence may be related to differences in cognitive function,and the mediating role of leisure activities are limited in Chinese research.This study used leisure activities as a mediating variable to investigate the mediating role of leisure activity between place of residence(city-town-rural)and cognitive function among Chinese older,this is where the innovation of the article comes in.Methods:Using cross-sectional data from the 2018 Chinese Longitudinal Healthy Longevity Survey,Pearson correlation analyses were employed to examine the relationships among various indicators.Mediation analyses were conducted using the SPSS PROCESS macro program,version 3.5,written by Hayes,to explore the mediating effects of leisure activity between place of residence and cognitive function in older adults.Results:A total of 10955 older adults were included in this study,with a mean age of(84.23±11.57)years.Among them,2739(24.8%)lived in the city,3627(33.1%)in town,and 4615(42.1%)in rural areas;their leisure activity score was(5.34±3.77),and their cognitive function score was(24.69±6.65).Place of residence,leisure activities,and cognitive function were significantly correlated(P<0.01).Using city as a reference,place of residence is negatively associated with cognitive function,and place of residence not only had a direct effect on cognitive function in older adults:town-cognitive function(effect=–0.399;95%confidence interval(CI)=(–0.685,–0.113));rural-cognitive function(effect=–0.42;95%CI=(–0.698,–0.141)).There were also indirect effects on cognitive function through the pathway of leisure activity:town-leisure activity-cognitive function(effect=–0.17;95%CI=(–0.246,–0.1)),rural-leisure activity-cognitive function(effect=–0.199;95%CI=(–0.272,–0.13)).Conclusion:Leisure activities play a partially mediating role between the impact of place of residence and cognitive function in Chinese older adults,and it is vital to pay attention to the impact of place of residence on the cognitive function of older adults in various aspects,and to increase the participation rate of older adults in leisure activities,which is beneficial to the prevention of cognitive decline and the protection of older adult’s physical and mental health.

Study on Plants Selection and Disposition in High-grade Residences

With rapid development of economy and emergence of more and more high-grade residences,it had highlighted that high-grade residence was the inevitable tendency of economic development and urban construction.Based on the fact that high-grade residences paid more attention to harmony of human and architecture with nature and required higher for landscaping,the paper emphasized that landscape quality of high-grade residences was the key factor deciding quality of the residence.In view of insufficiencies of plant landscaping planning in high-grade residences at home and abroad,by taking high-grade residences in Hangzhou City for example,analysis had been conducted by selecting typical cases.It pointed out that plants disposition in high-grade residences was unreasonable,architectures and landscapes were isolated,and greening ratio was stressed while design was neglected.And then,corresponding solutions had been proposed.In terms of plants selection,it should reasonably utilize native tree species,and properly select new and high-quality plant species.In terms of harmonious unity between plant landscape and architecture,it should lay stress on unity between sensory design and comfort design.In terms of plant design and disposition,it should stick to the theme of "residential environment",so as to rationalize plant design and disposition,and create more comfortable residential environment.

Mathematical model for precursor gas residence time in isothermal CVD process of C/C composites

In the chemical vapor deposition（CVD） process of C/C composites,the dynamics and mechanism of precursor gas flowing behavior were analyzed mathematically,in which the precursor gas was infiltrated by the pressure difference of the gas flowing through felt.Differential equations were educed which characterized the relations among the pressure inside the felt,the pressure outside the felt of the precursor gas and the porosity of the felt as a function of CVD duration.The gas residence time during the infiltration process through the felt was obtained from the differential equations.The numerical verification is in good agreement with the practical process,indicating the good reliability of the current mathematical model.

Research on Aesthetic Implication of Seaweed Residence in Jiaodong

Starting from the analysis on aesthetic implication of seaweed residence in Jiaodong,field study was conducted.With existing residence as the case study,the pervasive and simple ecological value,practical significance and sustainability of traditional residences were explored,so as to provide a theoretical basis and practical reference for new residential design of ecological value.

Responsive Design of Eco-residence in New Countryside

Considering the construction of rural residence as a significant content of constructing the new socialist countryside,problems of present rural housing in energy conservation and comfort level are analyzed.To develop eco-residence in new countryside,improve living conditions of local residents,save energy and reduce carbon emission,responsive capability of natural organisms to climate is introduced into architectural design,and concept of responsive design is analyzed.In view of actual regional and climatic characteristics,it is proposed that responsive design is able to solve many problems of present rural housing,then responsive structures in traditional Chinese dwellings are introduced,such as removable window,latticed wooden ventilation door,courtyard with hinged cover,transom and so on.On this basis,a dwelling unit of row house on suburban plains of Zhengzhou City is taken for a living example of responsive design from the perspectives of flexible corridor and courtyard,controllable natural wind channel,application of plant's responsive characteristics,flexible close building and controllable cavity space,to build comfortable living environments.

Effects of Temperature and Hydraulic Residence Time (HRT) on Treatment of Dilute Wastewater in a Carrier Anaerobic Baffled Reactor

Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.

Analysis of Traditional Residential Roof Language——A Case Study of Roof Decoration of Leichang Former Residence

The paper has analyzed decorative characteristics and architectural style of Leichang Former Residence which have been summarized as precise axial space sequence that can be divided into dragon gate, central room and drawing room. It has explained the spatial-temporal view of "the unity between heaven and human" and human's subjective ideological connotation in Leichang Former Residence. From the perspectives of the spiritual connotation of roof decorations, grading system of roofing tiles and manifestation form, it has deeply revealed the important expressive force and representativeness of roofs in architectural group, pointed out its aesthetic feature and spiritual restriction to architectures even human's behavior, and showed that the roof is the architectural factor directly manifesting "rituality" and "the unity between human and heaven" in Chinese traditional culture.

Residence time distribution of high viscosity fluids falling film flow down outside of industrial-scale vertical wavy wall: Experimental investigation and CFD prediction

The flow behavior of gravity-driven falling film of non-conductive high viscosity polymer fluids on an industrial-scale vertical wavy wall was investigated in terms of film thickness and residence time distribution by numerical simulation and experiment.Falling film flow of high viscosity fluids was found to be steady on a vertical wavy wall in the presence of the large film thickness.The comparison between numerical simulation and experiment for the film thickness both in crest and trough of wavy wall showed good agreement.The simulation results of average residence time of falling film flow with different viscous fluids were also consistent with the experimental results.This work provides the initial insights of how to evaluate and optimize the falling film flow system of polymer fluid.

Estimation of groundwater residence time and recession rate in watershed of the Loess Plateau

Groundwater residence time is an important indicator of hydrological cycle and essential for water resources development and utilization. In this paper, groundwater residence time in non-flood season, flood season and water year has been determined from daily streamflow hydrograph of ten hydrological stations in Wudinghe River Basin located in the middle reaches of the Yellow River Basin. Results have showed that： baseflow recession constant in Wudinghe River Basin ranges from 0.72 to 0.94 with a larger recession rate in flood season than that in non-flood season. Spatially, the recession rate of baseflow in loess area is the biggest, but is the smallest in the sandy area. The half-residence time of groundwater varies from 1.8 to 45.5 days while overall residence time of groundwater is between 34 and 342 days in different sub-basins of the Wudinghe River Basin. The annual average overall residence time of groundwater decreases from 117 days in the upper reaches to 73 days in the lower reaches.

Case Study of Low-carbon Rural Residences and Building Materials

Driven by the policy of "balancing urban and rural development", urbanization in China has been accelerated and agricultural population transferred to urban areas, which guarantees the improvement of life quality and living environment of rural and agricultural population. The urbanization has always been accompanied by national economic development and social progress, relocation and development of rural areas have become a social issue for a certain time. Therefore, it is imperative to explore a series of concrete, well-timed and practical measures for settling rural population, figure out proper modes, materials and methods for rural residence planning and construction under the new conditions, and provide relevant operation and theoretical support. Problems in mountainous rural areas of China were proposed as great population but limited land resources, backward construction techniques, and residences not valuing low carbon or environment protection. In view of these problems, construction techniques suitable for actual conditions of rural areas were explored, energy-saving building materials combined, the style of "dragon sucking water" for mountainous rural areas was proposed, design advantages and details of this architectural model were analyzed.

Particle Residence Time in Column Flotation Based on Cyclonic Separation

The cyclonic static micro-bubble column flotation (FCSMC) is an effective separation device for fine particle treatment. The high mineralization rate and short flotation time of this equipment can be attributed to its unique cyclonic force field. It also has been observed that the presence of a cyclonic force field leads to a lower bottom separation size limit and a reduction of unselective entrainment. The collection zone of the column is considered to consist of two parts,a column separation zone and a cyclonic zone. Total recovery of the collection zone was developed. For our study,we analyzed the particle movement in the cyclonic zone. Particle residence time equations for the cyclonic zone were de-rived by force analysis. Results obtained in this study provide a theoretical foundation for the design and scale-up of the FCSMC.

Modeling on Residence Time Distribution in Subsurface Flow Constructed Wetlands by Multi Flow Dispersion Model

As an important design factor for constructed wetlands,hydraulic retention time and its distribution will affect the treatment performance.Instantaneously injected sodium chloride tracers were used to obtain residence time distributions of the lab scale subsurface flow constructed wetland.Considering the presence of trailing and multiple peaks of the tracer breakthrough curve,the multi flow dispersion model(MFDM)was used to fit the experimental tracer breakthrough curves.According to the residual sum of squares and comparison between the experimental values and simulated values of the tracer concentration,MFDM could fit the residence time distribution(RTD)curve satisfactorily,the results of which also reflected the layered structure of wetland cells,thus to give reference for application of MFDM to the same kind of subsurface flow constructed wetlands.

Distribution, residence time, autotrophic production, and heterotrophic removal of DOP in the Mirs Bay, northern South China Sea

The importance of dissolved organic phosphorus(DOP) as a potential nutrient source for primary producers in marine systems has been recognized for up to eight decades, but currently, the understanding of the biogeochemistry of DOP is in its infancy. In the present study, monthly data between 2000 and 2014 were used to analyze the temporal and spatial distributions of DOP in the Mir Bay, the northern South China Sea. The DOP residence time(TDOP) was also investigated using a simple regression analysis in combination with chlorophyll a(Chl a) measurements while excess DOP(ΔDOP), produced by the biogeochemical processes of autotrophic production and heterotrophic removal, was determined using a two-component mixing mass-balance model in combination with salinity measurements. The results showed that the DOP concentration was(0.017±0.010) mg/L higher in the surface-water compared with the bottom-water and higher in the inner Tolo Harbour and waters adjacent to Shatoujiao compared with the main zone of the bay. Although seasonal changes and annual variability in the DOP were small, the surface DOP concentration was higher in the wet season(April–September)than in the dry season(October–March) due to the impacts of seaward discharges and atmospheric deposition into the bay. Measurement and regression results showed that the DOP release rate from phytoplankton production was about 1.83(gP)/(gChl a) and the TDOP was about 7 d, which implied that the DOP cycle in the bay was rapid. The ΔDOP was calculated from the model to be about 0.000 mg/L in the main zone of the bay and about 0.002 mg/L in the inner Tolo Harbour and waters adjacent to Shaotoujiao, suggesting that the autotrophic production of DOP was almost balanced by the heterotrophic removal in the main zone of the bay and dominated in the inner Tolo Harbour and waters adjacent to Shaotoujiao. In conclusion, the Mirs Bay is very productive and fairly heterotrophic.

Spatial Pattern of Long-term Residence in the Urban Floating Population of China and its Influencing Factors

Exploring long-term residence among the urban floating population is crucial to understanding urban growth in China,particularly since the 2008 financial crisis.By using China Migrants Dynamic Survey data for 2012–2014,China Labor-force Dynamics Survey data for 2014–2016,and macroscale urban matched data,we analyzed the spatial pattern of long-term residential behavior in China’s urban floating population in 2012–2016 and developed an urban spatial utility equilibrium model containing‘macro’urban factors and‘micro’individual and household factors to explain the pattern.The results first revealed that long-term residence is defined as≥6 yr for the urban floating population in China.Second,members of this population are more likely to be long-term residents of the megacities in the three urban agglomerations in eastern China as well as of small and medium-sized cities in western and northeastern China,whereas short-term residence is more likely in cities in central China and near the three urban agglomerations.Third,urban population density and housing prices,both have a significant U-shaped effect,are main factors affecting the spatial pattern of long-term residence.

Research on Model of Guiding Rural Residents' Relatively Centralized Residence——A Case Study of Chongqing City

On the basis of expounding the status quo of rural residents' residence, the thesis notes that influenced by the weak foundation of rural economy, the characteristic of mountain landscape, smallholder consciousness, shortage of capital and other factors, the rural residents in Chongqing City mainly live scattered. In addition to opportunities of the expansion and drive of city, rural market development, rural resources development, rural industrial development, and rural ecological migration, the model of urban development promotion, the model of market development drive, the model of land development drive, the model of rural industry construction and the model of resettlement and reconstruction are advocated in order to guide the rural residents to adopt relative centralized residence. The suggestions concerning guiding rural residents' relative centralized residence are put forward as follows: firstly, act according to circumstances and conduct scientific planning and design; secondly, propagate extensively and activate famers' willingness; thirdly, first experiment and exert the exemplary guide; fourthly, perfect policy and guarantee farmers' benefit; fifthly, strengthen leadership and decrease the risk of centralized residence; sixthly, boost gradually and realize moderate centralized residence.

Application of Variable Strategies in the Low-cost and Energy-saving Rural Residences in Transitional Areas

Changeful and complex rural family structure and climatic features of transitional areas in China make the application of variable strategy in energy-saving rural residence designs possible.Aiming at the low cost,several effective and reasonable variable strategies were proposed for the design of interior spaces,main bedroom,sunshine room,staircase,west wall,door and window design to satisfy changing structure of a family during different periods and their different thermo-technical requirements in winter and summer.In this way,thermal comfort of rural indoor spaces will be improved,more energy saved,useful experience and thoughts provided for the energy-saving residence design in cold regions and regions hot in summer and cold in winter.

Research on Current Situation and Thermal Performance of Rural Residences in Chaoshan Area in China (I)——Typical House Structure, Material Structure and Energy Consumption

Based on the field study and site test, the development and evolution of rural residence in Chaoshan Area have been illustrated. Two types of residences, that is, tradition-inheriting type and city-imitating type, have been classified. Furthermore, residences of tradition-inheriting type have been divided into four types. Then, the construction materials, structure and energy-saving facilities of rural residences in Chaoshan have been analyzed, aiming to provide a foundation for thermal performance and energy saving design of rural residences in Chaoshan Area.

Comparative analysis of residence and diffusion times in rotating bed used for biogas upgrading

Rotating bed can be used in desorption operation of biogas upgrading as a new technology. For enough time to desorb, it is important to study the relationship between the residence time of liquid in rotating bed and the material diffusion time of liquid droplet in desorption process. By theoretical deduction, the exponential relation between residence time and liquid flow rate and rotational speed and kinematic viscosity is obtained. By analyzing the solution of nonlinear partial differential equation, the time law of material diffusion in the droplet is obtained. Moreover, by comparing the residence and diffusion times, the diffusion time can be within or out of residence time range, which has a direct relationship to rotational speed and liquid flow. By experiment, the comparison between residence and diffusion times is more realistic when the rotational speed is higher.