Numerical simulation study of gob air leakage field and gas migration regularity in downlink ventilation

Aiming at the issue that mass of gas emission from mining gob and the gas exceeded in working face, gob air leakage field and gas migration regularity in downlink ventilation was studied. In consideration of the influence of natural wind pressure to analyze the stope face differential pressure, gob air leakage field distribution and gas migration regularity theoretically. Established a two-dimensional physical model with one source and one doab, and applied computational fluid dynamics analysis software Fluent to do numerical simulation, analyzed and contrasted to the areas of gob air leakage on size and gas emission from gob to working face on strength when using the downlink ventilation and uplink ventilation. When applied downward ventilation in stope face, the air leakage field of gob nearly working face, and the air leakage intensity were smaller than uplink, this can effectively reduce the gas emission from gob to working face; when used downlink ventilation, the air leakage airflow carry the lower amount of gas to doab than uplink ventilation, and more easily to mix the gas, reduced the possibility of gas accumulation in upper comer and the stratified flows, it can provide protection to mine with safe and effective production.

PARALLEL ARITHMETIC NUMERICAL SIMULATION AND APPLICATION OF SECONDARY MIGRATION- ACCUMULATION OF OIL RESOURCES

From such actual conditions as the effects of characteristics of miltilayer petroleum geology and permeation fluid mechanics, a new numerical model is put forward and coupling splitting-up implicit interactive scheme is formed. For the actual situation of Dongying hollow (four-layer) and Tanhai region (three-layer) of Shengli Petroleum Field, the numerical simulation test results and the actual conditions are coincident.

Oil/Gas Migration and Aggregation in Intra-Continental Orogen Based on Numerical Simulation: A Case Study from the Dabashan Orocline, Central China

Geofluid, driven by tectonic stress, can migrate and aggregate in geological body. Thus, numerical simulation has been widely used to rebuild paleo-tectonic stress field and probe oil/gas （one type of geofluid） migration and aggregation. Based on geological mapping, structural data, and mechanical parameters of rocks, we reconstruct the traces for gas/oil migration and aggregation in Dabashan intra-continental orogen using numerical simulation. The study shows that gas/oil, obviously dominated by late Middle Jurassic-Early Cretaceous paleo-tectonic stress field that is characterized by NE-SW shortening in the Dabashan thrust belt and SW-emanating shortening in its foreland belt, massively migrate from the Dabashan thrust belt to its foreland belt, that is, NE to SW, resulting in the formation of some probable favorable areas for oil/gas mainly along the Tiexi -Wuxi fault, in some superposed structure （e.g., Zhenba , Wanyuan , Huangjinkou , and Tongnanba areas）, and in the Zigui Basin. Thus, our study shows that numerical simulation can be effectively applied to study oil/gas migration and aggregation in intra-continental orogen and provided some significant evidences for oil/gas exploration.

Coupling mechanism of THM fields and SLG phases during the gas extraction process and its application in numerical analysis of gas occurrence regularity and effective extraction radius

The analysis of the coupling mechanism of thermal-hydraulic-mechanical(THM)fields,and solid-liquidgas(SLG)phases during gas extraction process is of profound significance to explore its numerical application in the gas occurrence regularity and its effective extraction radius.In this study,the Hudi coal mine in Qinshui basin is taken as the research area,the influencing factors of gas occurrence were analyzed,the differences in overburden load for gas pressure distribution and the factors influencing the effective extraction radius were further discussed by using the COMSOL software.The results show that the derivation of mathematical model in gas extraction shows that the process is a process the THM fields restrict each other,and the SLG phases influence each other.The longer the extraction time,the larger the influencing range of borehole,and the better the extraction effect.The larger the diameter of borehole,the larger the effective extraction radius,and the influence on gas extraction effect is smaller in the early stage and larger in the late stage.The borehole arrangement should be flexibly arranged according to the actual extraction situation.The higher the porosity,the higher the permeability,the better the gas extraction effect.The larger the overburden load of reservoir,the stronger the effective stress,which will result in the more severe the strain,and the closure of pore and fracture,which in turn will lead to the decrease of permeability and slow down the gas extraction.The relationship among extraction time,borehole diameter,negative pressure of gas extraction,permeability with effective extraction radius is exponential.This study has important theoretical and practical significance for clarifying and summarizing the gas occurrence regularity and its engineering practice.

Numerical simulation for erosion effects of three-phase flow containing sulfur particles on elbows in high sour gas fields

Sulfur particles carried by high-speed flow impact pipelines,which may cause equipment malfunctions and even failure.This paper investigates the scouring effect of mist gas containing sulfur particles on elbows in highly sour gas fields.The multiphase-flow hydrodynamic model of the 90
elbow was established by using the computational fluid dynamics(CFD)method.The scouring effects of the gasliquid mist fluid with the water-liquid fraction of 20%and particles with the diameter of 0.01 e0.05mm on elbows were explored within the flow velocity range of 0e20 m/s.In addition,the influences of secondary collision,mean curvature radius to diameter(R/D)ratio,inertial force,drag force,and Stokes number on trajectories of sulfur particles were studied.Moreover,the influences of hydrodynamic parameters of multiphase flow on corrosion inhibitor film were analyzed with the wall shear stress as the reference value.Serious erosion mainly occurred in the extrados of elbow as well as the junction between downstream pipeline and the intrados of elbow,the maximum erosion area occurs at 61.9
.When the incident position of the particle was far away from the top of the inlet plane,the probability of secondary collision became smaller.Furthermore,the erosion rate decreased with the rise in the R/D radio.The maximum erosion rate of elbow increased with the increase in the Stoke number.The maximum erosion rate reached 0.428 mm/a at 0.05mm particle diameter and 20 m/s fluid velocity.The wall shear stress increased with the increase in fluid velocity and mass flow rate of particle,the fitting function of the wall shear stress curve was the Fourier type.The results indicated that highvelocity particles had a serious erosion effect on elbows and affected the stability of the corrosion inhibitor film.The erosion effect could be retarded by controlling the velocity and diameter of particles.The results provided technical supports for the safe production in highly sour gas fields.

Development characteristics and quantitative prediction of reservoir fractures in the Chaoyanggou oil field

The Chaoyanggou oil field is a fractured low-permeability reservoir, where the distribution of oil and gas is controlled by the distribution and development of fractures.Based on outcrop, drilling core, thin section and log data, the development characteristics of fractures in this area are described.On this basis, the degree of fracture development was predicted by quantitative analysis of fracture strength and numerical simulation.The result shows that four groups of structural fractures, i.e., in near NS, and EW directions and in due NW and NE directions, were developed in the reservoir, with the nearly NS and EW fractures dominant, which are the along bedding decollement fractures formed by compressive folding action, while low angle shear fractures are related to thrusts.These fractures are mainly formed in the reversed tectonic stage at the end of the Mingshui formation during the Cretaceous period.The degree of fracture development is controlled by such factors as lithology, stratum thickness, faults, folds and depth.The fractures are developed with a clear zonation and are best developed in the northern zone, moderately developed towards the south and poorly developed in the middle zone.These prediction results are in good agreement with interpretation results from logs.

Influence of gas flow on thermal field and stress during growth of sapphire single crystal using Kyropoulos method

The professional modeling software package CrysVUn was employed to study the process of a large sapphire single crystal growth using Kyropoulos method.The influence of gas pressure on thermal field,solid-liquid interface shape,gas velocity field and von Mises stress were studied for the first time.It is found that the root of the seed melt when gas pressure equals to one atmosphere or more than one atmosphere,especially during the seeding period,this result is consistent with the experimental observation,and this paper presents three ways to solve this problem.The temperature gradient and stress decreases significantly as the gas pressure increases.The convexity of the solid-liquid interface slightly increases when the gas pressure increases.Numerical analysis was used to optimize the hot zone design.

Numerical Study on the Gas Leakage and Dispersion at the Street Intersection of a Building Group

Accidents involving natural gas leakage and dispersion pose a significant threat to human life and property.This threat is especially relevant at the street intersection at which dense buildings,heavy traffic flow,and complex underground pipe networks meet.Scholars have conducted numerous studies on gas leakage and dispersion,but investigations of natural gas leakage and dispersion at the street intersection of a building group are not in-depth.In this paper,we presented a three-dimensional(3D)physical model based on the Computational Fluid Dynamic(CFD)methodology to study the natural gas leakage and dispersion at the street intersection of a building group.We validated the CFD methodology applied in the research based on the data from the field tests and wind tunnel experiments.Then,we simulated and analyzed the pressure,wind,and concentration of natural gas dispersion at the street intersection.The simulation results showed that vortex regions,low-pressure zones,and a building group effect could cause a build-up of natural gas concentration under perpendicular wind direction conditions.In addition,the area of hazardous region tended to increase first and then drop with the dispersion height.In the case of this study,the maximum area of hazardous region is 200 m2 located in the height of 55 m,which is the middle plane in the computational domain.The results in the paper can provide scientific references for the safe operation and emergency-management decisions of municipal gas.

Application of deviation rate in oil and gas reservoir exploration

Three dimensional geophysical models were abstracted and established according to characteristics of oil and gas reservoir.Then direct current fields for different models were simulated with finite element software(finite element program generator) by hole-to-surface resistivity method.Numerical solution was compared with analytical one for the homogeneity earth model.And a new parameter of deviation rate was proposed by analyzing different plot curves.The results show that the relative error of solution for homogeneity earth model may attain to 0.043%.And deviation rate decreases from 18% to 1% and its anomaly range becomes wide gradually when the depth of oil and gas reservoir increases from 200 to 1 500 m.If resistivity ratio of oil and gas reservoir to sur-rounding rock decreases from 100 to 10 for the resistive oil and gas reservoir,the amplitude attenuation of deviation rate nearly reaches 8%.When there exists stratum above oil and gas reservoir,and influence of resistive stratum may be eliminated or weakened and anomaly of oil and gas reservoir can be strengthened.

Numerical simulation of combustion characteristics at different coal concentrations in bituminous coal ignition in a tiny-oil ignition burner

With the objective of producing a full-scale tiny-oil ignition burner, identical to the burner used in an 800 MWe utility boiler, numerical simulations were performed using Fluent 6.3.26 to study the progress of ignition for four coal concentration settings covering sub- operation conditions prevailing during the experiments performed with the burner. The numerical simulations conformed to the experimental results, demonstrating the suitability of the model used in the calculations. Simula- tions for a coal concentration of 0.40 kg/kg corresponding to a single burner operating at its rated output were also conducted, which indicated that gas temperatures along the burner centerline were high. As gas flowed to the burner nozzle, the high-temperature region expanded, ensuring a successful pulverized-coal ignition. With increasing coal concentration （0.08-0.40 kg/kg）, the gas temperature along the burner centerline and at the first and second combustion chamber exits decreased at the equivalent radial points. At the center of the second combustion chamber exit, the O2 concentrations were almost depleted for the five coal concentrations, while the CO concentrations peaked.

Numerical simulation of bituminous coal combustion in a fullscale tiny-oil ignition burner： Influence of excess air ratio

The progression of ignition was numerically simulated with the aim of realizing a full-scale tiny-oil ignition burner that is identical to the burner used in an 800 MWe utility boiler. The numerical simulations were conducted for four excess air ratios, 0.56, 0.75, 0.98 and 1.14 （corresponding to primary air velocities of 17, 23, 30 and 35 m/s, respectively）, which were chosen because they had been used previously in practical experiments. The numerical simulations agreed well with the experimental results, which demonstrate the suitability of the model used in the calculations. The gas temperatures were high along the center line of the burner for the four excess air ratios. The flame spread to the bumer wall and the high- temperature region was enlarged in the radial direction along the primary air flow direction. The O2 concentrations for the four excess air ratios were 0.5%, 1.1%, 0.9% and 3.0% at the exit of the second combustion chamber. The CO peak concentration was very high with values of 7.9%, 9.9%, 11.3% and 10.6% for the four excess air ratios at the exit of the second combustion chamber.

OIL AND GAS TRANSPORTATION AND STORAGE

Relative literatures and accident statistics published at home and abroad in recent years show that in addition to the natural disasters such as earthquakes, landslides, etc., events closely relative to such human activities as wars, terrorist attacks and blasting construction have become important reasons of oil and gas pipeline damage and failure. Conducted are 3D dynamic numerical simulation on spread of blasting seismic waves and dynamic response of vibration process of buried oil and gas pipelines after accidental explosion of explosive storage and numerical analysis on simulation results and obtained are vibration speed response characteristics of the pipelines. Based on calculation results obtained in a number of different conditions, such as dynamite inventories of explosive storage, site media properties, materials and sizes of buried pipelines, etc., combined with quantitative analysis on vibration safety criterion, safety distances of buried pipelines are obtained in different conditions, which has important theoretical significance and application value for safe and proper operation of buried oil and gas pipelines.

Numerical Study of Gas Production from a Methane Hydrate Reservoir Using Depressurization with Multi-wells

With the implementation of the production tests in permafrost and offshore regions in Canada,US,Japan,and China,the study of natural gas hydrate has progressed into the stage of technology development for industrial exploitation.The depressurization method is considered as a better strategy to produce gas from hydrate reservoirs based on production tests and laboratory experiments.Multi-well production is proposed to improve gas production efficiency,to meet the requirement for industrial production.For evaluating the applicability of multi-well production to hydrate exploitation,a 2D model is established,with numerical simulations of the performance of the multi-well pattern carried out.To understand the dissociation behavior of gas hydrate,the pressure and temperature distributions in the hydrate reservoir are specified,and the change in permeability of reservoir sediments is investigated.The results obtained indicate that multi-well production can improve the well connectivity,accelerate hydrate dissociation,enhance gas production rate and reduce water production as compared with single-well production.

Effect of electromagnetic force and anode gas on electrolyte flow in aluminum electrolysis cell

Based on the commercial computational fluid dynamics software CFX-4.3, electrolyte flow fields in a 156 kA pre-baked anode aluminum electrolysis cell were investigated in three different cases where the electrolyte melt was driven by different kinds of force, i.e. electromagnetic force only, the anode gas drag force only and both of the former two forces. The results show that when electromagnetic force was introduced only, most of the electrolyte moves horizontally; when anode gas drag force was introduced only, the electrolyte flows mainly around each anode with small circulation; when electromagnetic force and anode gas drag force were both introduced together, the structure of the electrolyte flow fields and the velocity of electrolyte are similar to that of the case where only anode gas drag force is used. The electrolyte flow fields are mainly determined by the anode gas drag force.

Effects of Gas Flow Field on Clogging Phenomenon in Close-Coupled Vortical Loop Slit Gas Atomization

In order to study the basic characteristics of gas flow field in the atomizing chamber near the nozzle outlet of the vortical loop slit atomizer and its influence mechanism on clogging phenomenon,the computational fluid dynamics(CFD)software Fluent is used to conduct a numerical simulation of the gas flow field in the atomizing chamber near the nozzle outlet of this atomizer under different annular slit widths,different atomization gas pressures and different protrusion lengths of the melt delivery tube. The results show that under atomization gas pressure p=4.5 MPa,the greater the annular slit width D,the lower the static temperature near the central hole outlet at the front end of the melt delivery tube,and the smaller the aspirating pressure at the front end of the melt delivery tube. These features can effectively prevent the occurrence of the clogging phenomenon of metallic melt. Under an annular slit width of D=1.2 mm,when the atomization gas pressure satisfies 1 MPa ≤ p ≤ 2 MPa and increases gradually,the aspirating pressure at the front end of the melt delivery tube will decline rapidly. This can prevent the clogging phenomenon of metallic melt. However,when the atomization gas pressure p >2 MPa,the greater the atomization gas pressure,the lower the static temperature near the central hole outlet at the front end of the melt delivery tube,and the greater the aspirating pressure at the front end of the melt delivery tube. Hence,the effect of preventing the solidification-induced clogging phenomenon of metallic melt is restricted. When atomization gas pressure is p =4.5 MPa and annular slit width is D=1.2 mm,the greater the protrusion length H of the melt delivery tube,and the smaller the aspirating pressure at its front end. The static temperature near the central hole that can be observed in its front end is approximate to effectively prevent the occurrence of clogging phenomenon of metallic melt. However,because of the small aspirating pressure,the metallic melt flows into the atomizing chamber from the central hole at the front end of the melt delivery tube at an increasing speed and the gas-melt ratio in the mass flow rate is reduced,which is not conducive to the improvement of atomization performance.

Hydrocarbon gas huff-n-puff optimization of multiple horizontal wells with complex fracture networks in the M unconventional reservoir

The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective method to improve oil recovery factor from unconventional oil reservoirs. Hydrocarbon gas huff-n-puff becomes preferable when the CO_(2) source is limited. However, the impact of complex fracture networks and well interference on the EOR performance of multiple MFHWs is still unclear. The optimal gas huff-n-puff parameters are significant for enhancing oil recovery. This work aims to optimize the hydrocarbon gas injection and production parameters for multiple MFHWs with complex fracture networks in unconventional oil reservoirs. Firstly, the numerical model based on unstructured grids is developed to characterize the complex fracture networks and capture the dynamic fracture features.Secondly, the PVT phase behavior simulation was carried out to provide the fluid model for numerical simulation. Thirdly, the optimal parameters for hydrocarbon gas huff-n-puff were obtained. Finally, the dominant factors of hydrocarbon gas huff-n-puff under complex fracture networks are obtained by fuzzy mathematical method. Results reveal that the current pressure of hydrocarbon gas injection can achieve miscible displacement. The optimal injection and production parameters are obtained by single-factor analysis to analyze the effect of individual parameter. Gas injection time is the dominant factor of hydrocarbon gas huff-n-puff in unconventional oil reservoirs with complex fracture networks. This work can offer engineers guidance for hydrocarbon gas huff-n-puff of multiple MFHWs considering the complex fracture networks.

Simulation of Gas Flow Field in Laval Nozzle and Straight Nozzle for Powder Metallurgy and Spray Forming

Gas flow field in nozzles and out of nozzles was calculated for Laval orifice and straight orifice nozzles. The results showed that the flow generated by the Laval nozzle had a higher exit velocity in the vicinity of the nozzle, in comparison with that of the straight nozzle, that is to say, a Laval nozzle was more efficient than a straight one in disintegrating the melt stream and was apt to produce finer powders. The flow generated by the Laval nozzle was less convergent and the velocity gradient along the radial direction was more moderate than that of a straight nozzle, which could contribute to a broad distribution of melt particles. According to their flow characteristics, the Laval nozzle was reckoned as a better choice of producing larger spray-formed billets.

Modeling underwater transport of oil spilled from deepwater area in the South China Sea

Based on a Lagrangian integral technique and Lagrangian particle-tracking technique,a numerical model was developed to simulate the underwater transport of oil from a deepwater spill. This model comprises two submodels: a plume dynamics model and an advection-diffusion model. The former is used to simulate the stages dominated by the initial jet momentum and plume buoyancy of the spilled oil,while the latter is used to simulate the stage dominated by the ambient current and turbulence. The model validity was verified through comparisons of the model predictions with experimental data from several laboratory flume experiments and a field experiment. To demonstrate the capability of the model further,it was applied to the simulation of a hypothetical oil spill occurring at the seabed of a deepwater oil/gas field in the South China Sea. The results of the simulation would be useful for contingency planning with regard to the emergency response to an underwater oil spill.

Coal Seam Permeability Improvement and CBM Production Enhancement by Enlarged Borehole: Mechanism and Application

The permeability is a key factor to determine the efficiency of coalbed methane(CBM)production.The borehole enlargement technology using hydraulic and mechanical measures to cut coal is an effective method to increase the coal seam permeability and improve the efficiency of gas drainage.Reasonable design of the layout of boreholes is the prerequisite for efficient and economical gas drainage.In this paper,based on the strain-softening model,the stress and permeability model of the coal seam around the enlarged borehole was built,and based on the dual-medium model,the gas migration model in the coal seam was established.Then the borehole enlargement gas drainage engineering of E9/10 coal seam in Pingdingshan No.8 coal mine was simulated by using COMSOL Multiphysics software.The distribution of stress and permeability in the coal seam around a borehole was analyzed,and the reasonable borehole radius of 0.25 m and reasonable borehole spacing of 6 m were determined.Finally,in Pingdingshan No.8 coal mine,field application was carried out in E9/10 coal seam-21070 working face from the high-level gas drainage roadway.The results show that the actual average coal slag discharge rate is 77.82%,which achieved borehole enlargement.The natural gas flow rate from an enlarged borehole is 2.3–7.3 times that of a normal borehole,and the influence range of enlarged boreholes is more than 6 m.The average gas drainage concentration of a group of enlarged boreholes is about 42%,and the average gas drainage amount is about 0.53 m3/min.After two months of gas extraction,the outburst risk in this area was eliminated,which provides a guarantee for safe coal mining.

Effectiveness and sensitivity analysis of solution gas re-injection in Baikouquan tight formation,Mahu sag for enhanced oil recovery

To address the fast productivity decline of the horizontal wells and low oil recovery during natural depletion in Baikouquan formation,the approach of solution gas re-injection was proposed with the primary objective of further developing this formation.Herein,a field-scale numerical compositional reservoir model was built up based on the formation properties and then the effects of permeability,fractures and formation stress on the production dynamics were thoroughly investigated.A sensitivity analysis,which can correlate the oil recovery with these parameters,was also performed.The results showed that the re-injection of solution gas could remarkably retard the production depletion of the horizontal wells thereby improving the oil production.The oil recovery rate increased with permeability,fracture half-length,fracture conductivity,and formation dip.With regard to the fracture distribution,it was found that the interlaced fracture outperformed the aligned fracture for the solution gas re-injection.The influence of the formation stress should be carefully considered in the production process.Sensitivity analysis indicated that the formation dip was the paramount parameter,and the permeability,fracture half-length,and fracture conductivity also played central roles.The results of this study supplement earlier observations and provide constructive envision for enhanced oil recovery of tight reservoirs.