Effect of high-multiple water injection on rock pore structure and oil displacement efficiency

Experimental methods,including mercury pressure,nuclear magnetic resonance(NMR)and core(wateroil)displacement,are used to examine the effects of high-multiple water injection(i.e.water injection with high injected pore volume)on rock properties,pore structure and oil displacement efficiency of an oilfield in the western South China Sea.The results show an increase in the permeability of rocks along with particle migration,an increase in the pore volume and the average pore throat radius,and enhanced heterogeneity after high-multiple water injection.Compared with normal water injection methods,a high-multiple water injection is more effective in improving the oil displacement efficiency.The degree of recovery increases faster in the early stage due to the expansion of the swept area,and the transition from oil-wet to water-wet.The degree of recovery increases less in the late stage due to various factors,including the enhancement of heterogeneity in the rocks.Considering both the economic aspect and the production limit of water flooding,it is recommended to adopt other technologies to further enhance oil recovery after 300 PV water injection.

Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

Organic matter transformation ratio, hydrocarbon expulsion efficiency and shale oil enrichment type in Chang 7_(3) shale of Upper Triassic Yanchang Formation in Ordos Basin, NW China

The major enrichment type of shale oil in the Chang 7_(3) shale of Upper Triassic Yanchang Formation in the Ordos Basin is unknown.This paper analyzes the organic matter transformation ratio,hydrocarbon expulsion efficiency and roof/floor sealing conditions of the Chang 7_(3) shale,and evaluates the major enrichment type of shale oil in this interval.The average organic matter transformation ratio of the Chang 7_(3) shale is about 45%;in other words,more than 50%of the organic matters have not transformed to hydrocarbons,and the lower the maturity,the greater the proportion of untransformed organic matters.The cumulative hydrocarbon expulsion efficiency of the transformed hydrocarbon is 27.5% on average,and the total proportion of untransformed organic matters plus retained hydrocarbons is greater than 70%.The relative hydrocarbon expulsion efficiency of the Chang 7_(3) shale is 60%on average,that is,about 40% of hydrocarbons retain in the shale.The Chang 7_(3) shale corresponds to Chang 7_(1+2) and Chang 8 sandstones as the roof and floor,respectively,and is further overlaid by Chang 6 shale,where extensive low porosity and low permeability–tight oil reservoirs have formed in the parts with relatively good porosity and permeability.Moreover,the Chang 7_(3) shale is tested to be in a negative pressure system(the pressure coefficient of 0.80–0.85).Therefore,the roof/floor sealing conditions of the Chang 7_(3) shale are poor.The retained hydrocarbons appear mostly in absorbed status,with low mobility.It is concluded that the medium–high mature shale oil is not the major enrichment type of shale oil in the Chang 7_(3) shale,but there may be enrichment opportunity for shale oil with good mobility in the areas where the sealing conditions are good without faults and fractures and oil reservoirs are formed off Chang 7_(1+2),Chang 6 and Chang 8.Furthermore,low–medium mature shale oil is believed to have great potential and is the major enrichment type of shale oil in the Chang 7_(3) shale.It is recommended to prepare relevant in-situ conversion technologies by pilot test and figure out the resource availability and distribution.

Study on Oil Displacement Efficiency of Binary Compound Flooding in Heterogeneous Reservoir

Heterogeneous reservoir characteristics for oilfield, choose HS-1 non-ionic surfactant and polymer formation in binary combination flooding system can significantly improve the rate of production of low permeability reservoir in heterogeneous reservoir. According to the core flooding experiment analyzed longitudinal heterogeneous models, single surfactant and a single polymer and polymer flooding of table binary complex drive effect. Studies show that binary combination flooding recovery effect is best, followed by polymer flooding, minimum of surfactant flooding, in heterogeneous reservoir.

Ridge-furrow rainwater harvesting with supplemental irrigation to improve seed yield and water use efficiency of winter oilseed rape(Brassica napus L.)

Ridge-furrow rainwater harvesting （RFRH） planting pattern can lessen the effect of water deficits throughout all crop growth stages, but water shortage would remain unavoidable during some stages of crop growth in arid and semiarid areas. Supplemental irrigation would still be needed to achieve a higher production. Field experiments were conducted for two growing seasons （2012-2013 and 2013-2014）to determine an appropriate amount of supplemental irrigation to be applied to winter oilseed rape at the stem-elongation stage with RFRH planting pattern. Four treatments, including supplemental irrigation amount of 0 （I1）, 60 mm （I2） and 120 mm （I3） with RFRH planting pattern and a control （CK） irrigated with 120 mm with flat planting pattern, were set up to evaluate the effects of supplemental irrigation on aboveground dry matter （ADM）, nitrogen nutrition index （NNI）, radiation use efficiency （RUE）, water use efficiency （WUE）, and seed yield and oil content of the oilseed rape. Results showed that supplemental irrigation improved NNI, RUE, seed yield and oil content, and WUE. However, the NNI, RUE, seed yield and oil content, and WUE did not increase significantly or even showed a downward trend with excessive irrigation. Seed yield was the highest in 13 for both growing seasons. Seed yield and WUE in 13 averaged 3235 kg ha^-1 and 8.85 kg ha^-1 mm-1, respectively. The highest WUE was occurred in 12 for both growing seasons. Seed yield and WUE in 12 averaged 3089 kg ha^-1 and 9.63 kg ha^-1 mm^-1, respectively. Compared to 13, 12 used 60 mm less irrigation amount, had an 8.9% higher WUE, but only 4.5 and 0.4% lower seed yield and oil content, respectively. 12 saved water without substantially sacrificing yield or oil content, so it is recommended as an appropriate cultivation and irrigation schedule for winter oilseed rape at the stem-elongation stage.

Design and application of electric oil pump in automatic transmission for efficiency improvement and start–stop function

For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function.

Discussion on the sweep efficiency of hybrid steam-chemical process in heavy oil reservoirs: An experimental study

Non-condensable gas(NCG),foam and surfactant are the three commonly-used additives in hybrid steam-chemical processes for heavy oil reservoirs.Their application can effectively control the steam injection profile and increase the sweep efficiency.In this paper,the methods of microscale visualized experiment and macroscale 3D experiment are applied to systematically evaluate the areal and vertical sweep efficiencies of different hybrid steam-chemical processes.First,a series of static tests are performed to evaluate the effect of different additives on heavy oil properties.Then,by a series of tests on the microscale visualized model,the areal sweep efficiencies of a baseline steam flooding process and different follow-up hybrid EOR processes are obtained from the collected 2D images.Specifically,they include the hybrid steam-N_(2)process,hybrid steam-N2/foam process,hybrid steam-surfactant process and hybrid steam-N2/foam/surfactant process(N2/foam slug first and steam-surfactant co-injection then).From the results of static tests and visualized micromodels,the pore scale EOR mechanisms and the difference between them can be discussed.For the vertical sweep efficiencies,a macroscale 3D experiment of steam flooding process and a follow-up hybrid EOR process is conducted.Thereafter,combing the macroscale 3D experiment and laboratory-scaled numerical simulation,the vertical and overall sweep efficiencies of different hybrid steam-chemical processes are evaluated.Results indicate that compared with a steam flooding process,the areal sweep efficiency of a hybrid steam-N2process is lower.It is caused by the high mobility ratio in a steam-N2-heavy oil system.By contrast,the enhancement of sweep efficiency by a hybrid steam-N2/foam/surfactant process is the highest.It is because of the high resistance capacity of NCG foam system and the performance of surfactant.Specifically,a surfactant can interact with the oil film in chief zone and reduce the interfacial energy,and thus the oil droplets/films formed during steam injection stage are unlocked.For NCG foam,it can plug the chief steam flow zone and thus the subsequent injected steam is re-directed.Simultaneously,from the collected 2D images,it is also observed that the reservoir microscopic heterogeneity can have an important effect on their sweep efficiencies.From the 3D experiment and laboratory-scaled numerical simulation,it is found that a N2/foam slug can increase the thermal front angle by about 150 and increase the vertical sweep efficiency by about 26%.Among the four processes,a multiple hybrid EOR process(steam-N2/foam/surfactant process) is recommended than the other ones.This paper provides a novel method to systematically evaluate the sweep efficiency of hybrid steam-chemical process and some new insights on the mechanisms of sweep efficiency enhancement are also addressed.It can benefit the expansion of hybrid steam-chemical processes in the post steamed heavy oil reservoirs.

Shale oil recovery by CO_(2)injection in Jiyang Depression,Bohai Bay Basin,East China

Laboratory experiments,numerical simulations and fracturing technology were combined to address the problems in shale oil recovery by CO_(2)injection.The laboratory experiments were conducted to investigate the displacement mechanisms of shale oil extraction by CO_(2)injection,and the influences of CO_(2)pre-pad on shale mechanical properties.Numerical simulations were performed about influences of CO_(2)pre-pad fracturing and puff-n-huff for energy replenishment on the recovery efficiency.The findings obtained were applied to the field tests of CO_(2)pre-pad fracturing and single well puff-n-huff.The results show that the efficiency of CO_(2)puff-n-huff is affected by micro-and nano-scale effect,kerogen,adsorbed oil and so on,and a longer soaking time in a reasonable range leads to a higher exploitation degree of shale oil.In the"injection+soaking"stage,the exploitation degree of heavy hydrocarbons is enhanced by CO_(2)through its effects of solubility-diffusion and mass-transfer.In the"huff"stage,crude oil in large pores is displaced by CO_(2)to surrounding larger pores or bedding fractures and finally flows to the production well.The injection of CO_(2)pre-pad is conducive to keeping the rock brittle and reducing the fracture breakdown pressure,and the CO_(2)is liable to filter along the bedding surface,thereby creating a more complex fracture.Increasing the volume of CO_(2)pre-pad can improve the energizing effect,and enhance the replenishment of formation energy.Moreover,the oil recovery is more enhanced by CO_(2)huff-n-puff with the lower shale matrix permeability,the lower formation pressure,and the larger heavy hydrocarbon content.The field tests demonstrate a good performance with the pressure maintained well after CO_(2)pre-pad fracturing,the formation energy replenished effectively after CO_(2)huff-n-puff in a single well,and the well productivity improved.

Effect of pulse drip irrigation and mulching systems on yield, quality traits and irrigation water use efficiency of soybean under sandy soil conditions

Two field experiments were carried out during growing seasons 2010 and 2011, it executed in research farm of national research center in Nubaryia region, Egypt to study the effect of pulse drip irrigation and mulching systems for saving water, increasing and improving yield of soybean. The study factors were, pulse drip irrigation technology (adding of daily water requirements on 4 times, 8 times, 12 times compared with adding of daily water requirements on 1 time) and mulching systems (covering the soil with black plastic mulch “BPM”, rice straw mulch “RSM” and the control treatment was soil surface without mulch “WM”). The following parameters were studied to evaluate the effect of pulse drip irrigation and mulching systems: 1) Soil moisture distribution in root zone, 2) Growth characters of soybean plant, 3) Yield of soybean, 4) Irrigation water use efficiency of soybean “IWUE soybean”, and 5) Oil content and oil yield, 6) Protein content and protein yield, 7) Economical parameter. According to the economical view and the results of statistical analysis for effect of pulse drip irrigation and mulching systems on yield, quality traits and IWUE soybean indicated that, applying the irrigation requirements on 8 pulses/day with using BPM is the best conditions because under these conditions was occurred the highest value of yield, quality traits and IWUE soybean and there was significant deference between this case and other treatments. Where, pulse irrigation technique increase from water movement in horizontal direction than vertical direction hence improve from soil moisture distribution and wetted soil volume in root zone and using BPM decrease from evaporation process rate from soil surface hence decreasing of salts accumulation in addition to decreasing of weed growth in the root zone. All traits at AIR on 12 pulses/ day are decreased by increasing of pulses, this may be due to irrigation water was very small with every pulse at AIR on 12 pulses/day in addition increasing the total time of time-off, this mean, un-sufficient application for irrigation water to remove water stress in the root zone.

Achieving High Soil Fertility, Efficient Fruit Harvesting and Low Carbon Footprint Palm Oil Production in Malaysia

The current palm oil harvesting process removes the whole fruit bunch from the palm with most of the fruit unripe, and takes the whole fruit bunch from the plantation to a processing mill. There are two consequences. This robs the symbiotic palm/soil eco-system of important nutrients and steadily reduces soil fertility. Poor soil fertility is now the limit to palm oil production in peninsular Malaysia despite much use of expensive fertiliser, and weak palms in unhealthy soil are prone to the fungus Ganoderma. Secondly, it takes much energy to remove the fruit from the bunch and the quantity and quality of the oil is less than that of ripe fruit. All this is because ripe fruit—which naturally becomes loose—has been defined as “a problem” in harvesting. This paper proposes covering the fruit bunch in a mesh sack whilst ripening, which prevents ripe fruit naturally from becoming loose being a problem and transforms the whole harvesting process. This allows efficient fruit separation and fruit pressing to be done at the foot of the palm tree with only the oil being removed from the plantation, both simplifying and improving the harvesting process and maintaining the organic fertility cycle, adding value in every respect.

Mechanism and reservoir simulation study of the autothermic pyrolysis in-situ conversion process for oil shale recovery

The autothermic pyrolysis in-situ conversion process (ATS) consumes latent heat of residual organic matter after kerogen pyrolysis by oxidation reaction, and it has the advantages of low development cost and exploitation of deep oil shale resources. However, the heating mechanism and the characteristic of different reaction zones are still unclear. In this study, an ATS numerical simulation model was proposed for the development of oil shale, which considers the pyrolysis of kerogen, high-temperature oxidation, and low-temperature oxidation. Based on the above model, the mechanism of the ATS was analyzed and the effects of preheating temperature, O_(2) content, and injection rate on recovery factor and energy efficiency were studied. The results showed that the ATS in the formation can be divided into five characteristic zones by evolution of the oil and O_(2) distribution, and the solid organic matter, including residue zone, autothermic zone, pyrolysis zone, preheating zone, and original zone. Energy efficiency was much higher for the ATS than for the high-temperature nitrogen injection in-situ conversion process (HNICP). There is a threshold value of the preheating temperature, the oil content, and the injection rate during the ATS, which is 400 °C, 0.18, and 1100 m3/day, respectively, in this study.

Material-Efficient Utilization of Waste Oils—Biodegradability and Other Chemical Properties of Vegetable Recycling Oils

Material efficiency is nowadays an essential topic to promote the sustainable use of natural resources, waste materials and industrial by-products, in agreement with the principle of sustainable development and LCA (life cycle assessment). In this research it was determined the biodegradation of used vegetable oil based products and their important physico- chemical properties for their suitability in different applications such as chain oil in the forestry equipment and mold oil in concrete casting etc. Biodegradability is a measure of the ecological nature of products, and thus from an environ- mental point of view, is the most important evaluated property in this research. As a result, all measured properties of the studied recycled vegetable oils show that the products are environmentally friendly. Two types of vegetable oil were studied;three chain oils and two mold oils. The degree of biodegradation (BOD28) of the mold oils, was about 77 % and the biodegradation of chain oils was about 60% - 62%. In addition, this paper also presents a process outline for manu- facturing recycling vegetable oils.

Exergetic Efficiencies Evaluation of Flows and Operations on the Mechanical Extraction Process of <i>Jatropha curcas</i>Oil

Jatropha curcas oil is one of the most promising renewable energy sources for rural areas due to its ease of production, which can be used as an alternative to diesel and fuel oil. The development of sustainable energy has been the issue of the discussion about biofuel production given the considerable consumption amount of fossil fuel during the transformation process. And any production process that consumes a lot of energy records a significant destruction of useful energy, which leads to thermodynamic inefficiencies of the process. Besides, the focus on environmental safety is gradually shifting towards energy efficiency in industrial processing. Exergetic analysis is an effective tool for measuring the performance of a production process since exergy is a quantity that measures energy quality. This study assesses the scale of resource degradation in Jatropha oil mechanical extraction processes and finds improving possible pretreatments options for more efficient production. Data from experiments combined with existing databases have permitted to establish the exergy flow balance at each stage of production. The process exergetic yield varies from 29.85% to 35.41% according to the chosen pretreatment process. Mass exergy accounts for 67% of incoming flows and, for outgoing flows, more than 60% is associated with the mass exergy generated by the process waste. The uncertainties analysis on the results was used to validate model results, and to visualize the minimum values for the most unfavorable cases and the maximum values when all the parameters are at their optimum values.

Investigation of feasibility of alkali-cosolvent flooding in heavy oil reservoirs

Cold production is a challenge in the case of heavy oil because of its high viscosity and poor fluidity in reservoir conditions.Alkali-cosolvent-polymer flooding is a type of microemulsion flooding with low costs and possible potential for heavy oil reservoirs.However,the addition of polymer may cause problems with injection in the case of highly viscous oil.Hence,in this study the feasibility of alkali-cosolvent(AC)flooding in heavy oil reservoirs was investigated via several groups of experiments.The interfacial tension between various AC formulations and heavy crude oil was measured to select appropriate formulations.Phase behavior tests were performed to determine the most appropriate formulation and conditions for the generation of a microemulsion.Sandpack flooding experiments were carried out to investigate the displacement efficiency of the selected Ac formulation.The results showed that the interfacial tension between an AC formulation and heavy oil could be reduced to below 1o-3 mN/m but differed greatly between different types of cosolvent.A butanol random polyether series displayed good performance in reducing the water-oil interfacial tension,which made it possible to form a Type Il microemulsion in reservoir conditions.According to the results of the phase behavior tests,the optimal salinity for different formulations with four cosolvent concentrations(0.5 wt%,1 wt%,2 wt%,and 3 wt%)was 4000,8000,14000,and 20000 ppm,respectively.The results of rheological measurements showed that Type Ill microemulsion had a viscosity that was ten times that of water.The results of sandpack flooding experiments showed that,in comparison with waterflooding,the injection of a certain Ac formulation slug could reduce the injection pressure.The pressure gradient during waterflooding and AC flooding was around 870 and 30-57 kPa/m,respectively.With the addition of an AC slug,the displacement efficiency was 30%-50%higher than in the case of waterflooding.

Effects of cosolvents on CO_(2) displacement of shale oil and carbon storage

Molecular dynamics method was used to establish composite wall/inorganic nanopores of three pore sizes, three shale oil systems, five CO_(2)-cosolvent systems, and pure CO_(2) system. The process of CO_(2)-cosolvent displacement of crude oil in shale nanopores and carbon storage was simulated and the influencing factors of displacement and storage were analyzed. It is shown that the attraction of the quartz wall to shale oil increases with the degree of hydroxylation. The higher the degree of quartz hydroxylation, the more difficult it is to extract the polar components of shale oil. Nanopore size also has a great impact on shale oil displacement efficiency. The larger the pore size, the higher the shale oil displacement efficiency. The closer the cosolvent molecules are to the polarity of the shale oil, the higher the mutual solubility of CO_(2) and shale oil. The more the non-polar components of shale oil, the lower the mutual solubility of CO_(2) and shale oil with highly polar cosolvent. Ethyl acetate is more effective in stripping relatively high polar shale oil, while dimethyl ether is more effective in stripping relatively low polar shale oil. Kerogen is highly adsorptive, especially to CO_(2). The CO_(2) inside the kerogen is not easy to diffuse and leak, thus allowing for a stable carbon storage. The highest CO_(2) storage rate is observed when dimethyl ether is used as a cosolvent, and the best storage stability is observed when ethyl acetate is used as a cosolvent.

A novel nanofluid of modified carbon black nanoparticles for enhanced oil recovery in low permeability reservoirs

A novel nanofluid of modified carbon black(MCB)nanoparticles was initially developed for enhanced oil recovery(EOR)in low permeability reservoirs.The MCB nanoparticles were obtained via a three-step reaction involving modification by oxidation,acyl chlorination,and activated grafting.MCB nano-particles were spherically dispersed,with an average size of 72.3 nm.Compared with carbon black(CB)nanoparticles,dispersed MCB nanoparticles can effectively reduce the oil-water interfacial tension(IFT)to 10^(-2)mN/m and change the surface wettability of sand particles.Based on the results of core flooding experiments,the MCB nanoparticles exhibited a better EOR capacity than surfactants and CB nano-particles,and the final oil recovery was significantly increased by 27.27%.The core scanning test showed that the MCB nanoparticles could plug high permeability channels by adsorbing onto the surfaces of sand particles and forming larger aggregates that bridge across pores or throats,resulting in a higher swept volume.The synergistic effects of improved swept volume and oil displacement efficiency were the EOR mechanisms of the MCB nanoparticles.The studies indicate that these MCB nanoparticles have excellent potential for EOR in low permeability reservoirs.

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

基于改进NSGA-Ⅱ算法的间歇采油制度优化

对于低渗透率油井,采用间歇采油制度能有效避免空抽磨损,并减少电能消耗量。为此通过分析沉没度和地层流压随抽油机井生产时间变化的规律,从系统节能的角度出发,建立以采油总产量最大、能耗最低为目标的间歇采油制度多目标优化模型。引入NSGA-Ⅱ并改进该算法对间歇采油制度多目标优化模型求解,运用改进算法得到的Pareto最优解的多样性和收敛性,合理优化抽油机的最优停机时间,最大效率地提升采油效率的同时,最小化电能消耗量。试验结果表明,基于Pareto多目标遗传算法的间歇采油机制优化具有明显的优势,在优化系统效率的同时能够有效减少电能消耗。研究结果可为油井间歇采油机制的改进和优化提供有力的技术支持。

老油田“3+2”大幅度提高采收率技术内涵、机理及实践

传统方式的化学驱项目一般采取“2+3”的协同方式,也就是先通过水驱井网调整一次到位,再实施化学驱,受剩余油认识和预测精度的影响,会出现部分低产低效井,化学驱含水谷底平台期短,提高采收率幅度有限。为此,胜利油田通过基础攻关和探索实践,创新提出了化学驱与动态优化调整加合增效的“3+2”大幅度提高采收率技术,该技术是指在化学驱过程中,充分发挥和利用驱油体系扩大波及体积、提高驱油效率、调整动态非均质性的特点,主动培育、壮大动态剩余油富集区(“油墙”),适时井网调整、重构流场、均衡注采,高效动用、采出“油墙”,最大程度延长化学驱含水谷底平台期,实现三次采油和二次采油(“3+2”)适配优化、大幅度提高采收率的目的。通过大量物理模拟和数值模拟研究,明确了“井网-驱油剂-剩余油”适配优化提高采收率的机理。该技术在胜坨油田二区东三段5砂组进行了应用,通过优化“3+2”井网调整方式、驱油体系和注入参数等,预计区块含水谷底平台期从3 a延长至8 a,最终采收率为60.5%,比原方案采收率再提高7.5百分点。该技术是老油田大幅度提高采收率的关键技术,可以为中外同类型油藏延长化学驱见效高峰期提供指导和借鉴。

庆城页岩油泵入式光纤监测技术实践

庆城油田页岩油水平井主体采用分段多簇细分切割体积压裂技术,但目前仍存在多簇起裂效率不清晰的问题。为了评价多簇起裂有效性及裂缝延伸规律,开展了水平井泵入式光纤测试技术先导性试验,该技术具有工艺灵活、便捷高效及成本低的独特优势。测试结果表明,水平井分段多簇细分切割体积压裂通过射孔限流+颗粒暂堵方式,能够实现100%多簇完全起裂,但各簇进砂(液)量差异明显,各簇裂缝延伸不均衡。该项研究初步回答了多簇起裂有效性问题,并验证了水平井套管内泵入式光纤监测技术的可行性,丰富了水平井体积压裂效果评估测试手段,同时为鄂尔多斯盆地页岩油水平井压裂工艺及参数优化提供了重要依据。