Synthesis and Characterization of Phenyl Camellia oleifera Seed Oil Ester Plasticizing PVC

Plasticizers are essential additives in the processing of polyvinyl chloride(PVC),with phthalate plasticizers being widely used.However,these conventional plasticizers have been shown to be harmful to human health and environmentally unfriendly,necessitating the exploration of eco-friendly bio-based alternatives.In this study,Camellia oleifera seed oil,a specialty resource in China,was utilized as a raw material and reacted with 4,4′-Methylenebis(N,N-diglycidylaniline)(AG-80)to synthesize Phenyl Camellia seed Oil Ester(PCSOE).PCSOE was employed as a plasticizer to prepare modified PVC films with varying concentrations,with the conventional plasticizer dioctyl phthalate(DOP)serving as a control.Experimental results demonstrate that PSCOE-plasticized PVC films exhibit enhanced hydrophilicity,tensile strength,and thermal stability compared to DOP-modified PVC films.The contact angle of PSCOE-plasticized PVC films ranges from 66.26°to 78.48°,which is generally lower than the contact angle of DOP-modified PVC films at 78.40°,indicating improved hydrophilicity due to the modification with PCSOE.The tensile strength of PSCOE-plasticized PVC films ranges from 17.73 to 20.17 MPa,all surpassing the value of 16.41 MPa for DOP-modified PVC films.Moreover,the temperatures corresponding to 5%,10%,and 50%weight loss for PVC samples modified with PCSOE are higher than those for DOP.Hence,PCSOE presents a viable alternative to DOP as a plasticizer for PVC materials.

Development of a KASP Marker on Chromosome A05 for Seed Oil Content of Brassica napus

In order to identify the molecular markers that can be widely used in the breeding of Brassica napus L.varieties with high seed oil content under different genetic backgrounds,we developed a Kompetitive Allele Specific PCR(KASP)marker for seed oil content on the basis of the results from available studies.The verification in the F2 population showed that the marker was closely linked to the quantitative trait locus(QTL)for oil content on chromosome A05.The findings helped to breed the‘Fengyou’varieties with high seed oil content in the middle reaches of the Yangtze River.

Design and Production of Infant Flours Based on Pumpkin Pulp Enriched with Cakes Extracted from Its Seeds

The inclusion of composite flours in infant food at weaning time should be a priority for mothers. The aim of this project is to formulate infant flour based on pulp flour enriched with oilcake from these grains after extraction of the oil. To do this, the elements were combined to obtain a regulatory formulation. Micro- and macronutrients, minerals, vitamins and tasting of the prepared porridge were determined. The results obtained were satisfactory. The moisture content of the fruit pulp was determined using oven-drying techniques: 92.2%, carbohydrates 6.00%, lipids 0.3%, ash 0.80%, proteins 1.10%, calcium 19.8%, phosphorus 42.6% and iron 0.4%. Furthermore, the carbohydrate content of flours composed of 5% insertion is 62.9 g to 48.8 g per 100 g, and the protein content of compound flours with 5% insertion is 15.9 g to 28.25 g per 100 g. On the other hand, the vitamin C and E contents of fresh pulp and oilcake are 25 mg, 13 mg and 21 mg respectively. However, only copper and β-carotene from 5% to 30% insertion remain invariant to the different insertion rates, with a value of 25 mg for copper and 0 µg for β-carotene. In addition, a variation in the degree of swelling of weaning flours compared with the standard from 3.95% at 5% insertion to 3.58 at 30% insertion was observed. The solubility of flours increases on the one hand with increases in the degree of insertion of the cakes. Flour formulated so many toward basicity. But the presence of traces of oil containing fatty acids can reduce this basicity. This study may be an alternative of industrial flours in infant nutrition.

The molecular mechanism of WRINKLED1 transcription factor regulating oil accumulation in developing seeds of castor bean

The transcription factor WRINKLED1(WRI1),a member of AP2 gene family that contain typical AP2 domains,has been considered as a master regulator regulating oil biosynthesis in oilseeds.However,the regulatory mechanism of RcWRI1 in regulating oil accumulation during seed development has not been clearly addressed.Castor bean(Ricinus communis)is one of the most important non-edible oil crops and its seed oils are rich in hydroxy fatty acids,widely applied in industry.In this study,based on castor bean reference genome,three RcWRIs genes(RcWRI1,RcWRI2 and RcWRI3)were identified and the expressed association of RcWRI1 with oil accumulation were determined.Heterologous transformation of RcWRI1 significantly increased oil content in tobacco leaf,confirming that RcWRI1 activate lipid biosynthesis pathway.Using DNA Affinity Purification sequencing(DAP-seq)technology,we confirmed RcWRI1 binding with Transcription Start Site of genes and identified 7961 WRI1-binding candidate genes.Functionally,these identified genes were mainly involved in diverse metabolism pathways(including lipid biosynthesis).Three cis-elements AW-box([CnTnG](n)7[CG])and AW-boxes like([GnAnC](n)6[GC]/[GnAnC](n)7[G])bound with RcWRI1 were identified.Co-expression network analysis of RcWRI1 further found that RcWRI1 might be widely involved in biosynthesis of storage materials during seed development.In particular,yeast one hybrid experiments found that both AP2 domains within RcWRI1 were required in binding targeted genes.These results not only provide new evidence to understand the regulatory mechanism of RcWRI1 in regulation of oil accumulation during castor bean seed development,but also give candidate gene resource for subsequent genetic improvement toward increasing oil content in oilseed crops.

Interactive effect of hot air roasting processes on the sensory property,allergenicity,and oil extraction of sesame(Sesamum indicum L.)seeds

Sesame seeds are a healthy food ingredient and an oil crop for sesame oil production;however,it has recently been recognized as an essential allergenic food by FAO/WHO.This research investigated the relationship between the hot air roasting process(at 120,150,and 180℃ for 10,20,and 30 min)and several quality attributes of sesame seeds since roasting is the key process for preparing sesame seeds for both consumption and oil production.The hot air process followed the central composite design.The changes of sesame in terms of color,sensory properties(odor,texture,color,and taste),allergenicity caused by oleosins(ses i 4 and ses i 5),as well as oil extraction and quality were monitored using a colorimeter,sensory evaluation panelists,ELISA,as well as oil yield and acid value,respectively.Roasting temperature influenced the product quality more than roasting time,although the two processing parameters significantly interacted with each other(P<0.001).Sensory evaluation indicated medium roasting generated attractive flavor,order,appearance,and crispy texture.Allergenicity was high in sesame seeds after high-temperature roasting,according to IgE binding capacity test.Sesame oil extraction was favored by high-temperature roasting,which,however,adversely affected the oil quality.The optimal roasting conditions were 150.5℃ for 15 min for optimized sesame seeds quality in terms of sensory properties and allergenicity,while roasting at 158℃ for 10 min was optimal for sesame oil production.The finding will benefit the sesame seed industry.

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

New Process for Extracting Oil and Starch from Tea Seeds

A new process for extracting oil and starch from tea seed was introduced. The new process included one special link compared with all of the processes used now for tea seed oil and starch production. The link was static fermentation by which oil bodies and starch were separated naturally from tea seeds. By the process, tea seed oil and starch which were in conformity with government standards about edible oil and starch were successfully produced with 16% and 8% of production rate, respectively. The new process has many advantages, such as more simple equipments, lower production cost and whole natural products, etc..

Phosphorus Containing Rubber Seed oil as a Flame Retardant Plasticizer for Polyvinyl Chloride

The application of phthalate plasticizers has been restricted around the world due to their poor migration and potential harm to the human body.Hence,producing functional bio-based plasticizers via exploiting clean and reusable resources meets the satisfaction of current demands.In this study,flame-retardant rubber seed oil-based plasticize(FRP)was prepared via epoxidation reaction and ring opening addition reactions,which was used as a flame-resistant plasticizer for polyvinyl chloride to replace petroleum-based phthalate plasticizer.When DOP was replaced with FRP,the torque of PVC blends increased from 11.4 to 18.4 N⋅m,the LOI value increased from 24.3%for PVC-FRP-0%to 33.1%for PVC-FRP-20.The THR value diminished from 39 MJ/m^(2)(pertaining to PVC-FRC-0)to 22 MJ/m^(2)Tg increased from 23°C to 47°C,the weight loss of plasticized PVC blends significantly reduced from 22.6%to 2.8%in leaching tests.The study provided a new way to prepare flame retardant plasticizer using rubber seed oil as raw material.

Anti-lipid-oxidation effects and edible safety evaluation of the oil extracted by a supercritical CO_(2) process from coix seed fermented by Monascus purpureus

The physicochemical properties and composition of coix seed oil produced by Monascus purpureus fermentation and supercritical CO_(2)extraction were determined.Anti-lipid-oxidation and edible safety were evaluated using a cholesterol-fish oil model,acute oral toxicity assay,and genetic toxicity assay in vitro and in vivo,respectively.The results show that the extraction oil from fermented coix seed(FCS-O)had good physicochemical quality and abundant active components with physiological function.In particular,γ-tocotrienol,γ-oryzanol,coixenolide and oleic acid concentrations reached 72.83μg/g,745.96μg/g,9.65 mg/g and 316.58 mg/100 g DW,respectively.The FCS-O exhibited higher antioxidant capability in inhibiting lipid oxidation and peroxidation.Compared to the blank control,the concentrations of 7-ketocholestreol and peroxide only were 8.42μg/mL and 16.16 mmol/kg at 168 h of oxidation(P<0.01).In addition,the FCS-O has been confirmed to be a very safe edible oil,with no acute toxicity(LD50>10 g/kg bw,considered actually non-toxic)and no induced mutagenicity,cytotoxicity or genotoxicity.These results serve as a good safety reference for future application of the oil from fermented coix seed.The development and utilization of this kind of oil will be beneficial as a food,food ingredient,nutritional supplement,or natural food antioxidant to promote good health function.

Physicochemical and Biochemical Composition of Balanites aegyptiaca Seed and Seed Oil from Burkina Faso

In Burkina Faso, the seeds of Balanites aegyptiaca have been considered to be potentially high lipid, protein and mineral sources but seem to be neglected and sometimes unknown by communities. This study aims to complete data on seed oil and detail on amino acids and minerals composition of the seed of B. aegyptiaca for better use. Physicochemical parameters such as moisture and ash content, saponification index, iodine, acid value, peroxide value and the melting point were determined. Seed oil triglycerides, fatty acids and amino acids have been estimated throughout this study. The moisture and ash content were 3.70% ± 0.1% and 2.90% ± 0.2%, respectively. The saponification and iodine values were respectively 181.96 ± 0.4 mg KOH/g of oil and 104.86 ± 0.6 g of iodine/100 g of oil. Polyunsaturated fatty acid content (50.94%) was the most important. Triglyceride (LLO, 22.4%) was the major triglyceride. 9 essential amino acids and 9 non-essential amino acids were identified. Phenylalanine (11697.82 ± 0.00 mg/kg) was the most important essential amino acid. The content of 21 minerals was determined and the most important was potassium (9323.13 ± 0.01 mg/kg). Ca/P, Ca/Mg, Ca/Mg and Na/K ratios were 0.34;1.18;0.04 and 0.19 respectively. B. aegyptiaca seed oil is a source of multiple nutritional values and can be used by the population for multipurpose.

Profiling and geographical distribution of seed oil content of sunflower in Ukraine

The sunflower has the potential to be a highly competitive crop owing to its diversity market and the valuable oil it produces.Nevertheless,the amount of sunflower seed oil-a key factor for the crushing industry-is affected by genotype and environment,which sometimes is difficult to predict.The paper analyzes the theoretical principles of sunflower growth in Ukraine,highlights the current trends in the sowing of this crop,the influence of climatic factors of the environment on the prospects of the oilseed sunflower yield.The results of the research are presented for 3 years(2014-2016),during the authors conducted a grain quality observatory at the regional level,taking into account the climatic conditions of sunflower growth in different natural zones of Ukraine(from 45
to 51
north latitude and from 22
to 37
east longitude).Additionally,the research includes the coefficient of significance of the deviation from long-term climatic indicators,which makes it possible to forecast sunflower yield in the future.The analyzed data was obtained from the commercial fields with a minimum area of 40 ha in all Ukrainian regions except Crimea peninsula,Donetsk and Luhansk regions.The results obtained in research show the great diversity of oil content index as per both latitude and longitude meaning.If we consider the entire country,this survey shows that the seed oil content can change dramatically from year to year:e.g.47.5%in one year versus 45.7%in another year.Regionally,these changes have a completely different dynamic with a gradual decrease in seed oil content in the southern part of the country.The main goal of the research was to identify the best sunflower growing areas in Ukraine according to the oil content index.

Plasticizing Effect of Camellia oleifera Seed-Oil-Based Plasticizer on PVC Material Modification

In this study,as the plasticizer,Camellia oleifera seed-oil-based cyclohexyl ester(COSOCE)was prepared by the reaction of cyclohexene oxide and refined C.oleifera seed oil(RCOSO)obtained by acidification hydrolysis after saponification.In addition,the structure of the target product was confirmed by Fourier transform infrared(FTIR)spectroscopy,nuclear magnetic resonance(NMR)spectroscopy,and Raman spectroscopy.COSOCE was used as plasticizer-modified polyvinyl chloride(PVC)membranes.The structure of the COSOCE-modified PVC membranes were characterized by Raman spectroscopy and scanning electron microscopy(SEM).The properties of the COSOCE-modified PVC membrane were characterized by contact angle measurements,universal testing machine,thermogravimetric analysis(TGA),and differential scanning calorimetry(DSC).The results revealed that(1)The COSOCE-modified PVC membranes exhibit a good microscopic morphology.Combined with energy-dispersive X-ray spectroscopy(EDS)and contact angle measurement results,the COSOCE-modified PVC membranes are confirmed to be a hydrophilic material.(2)The modified PVC membrane with 60%COSOCE exhibited the best mechanical properties.The tensile strength reached 23.56±2.94 MPa.(3)COSOCE-modified PVC material exhibited better thermal stability,with a loss rate of less than 75%at the end of the first decomposition stage.Compared with that of the dioctyl-phthalate(DOP)-modified PVC membrane,the initial decomposition temperature of PVC was increased by 1.17°C–8.17°C,and the residual rate was increased by 0.67%–5.75%.The carbon–carbon double bond in the COSOCE molecular structure can remove the free radicals generated during the degradation of PVC material and slow down the decomposition rate of PVC.In addition,the double bond can be cross-linked partially with the PVC molecular chain containing the conjugated polyene structure,thereby increasing the movement resistance of the PVC molecular chain segment.Hence,COSOCE can replace DOP as a PVC plasticizer.

Effects of Heat Stress during Seed Filling Stage on Brassica napus Seed Oil Accumulation and Chlorophyll Fluorescence Characteristics

As global temperature rise,the threat of heat stress to rapeseed production is becoming more obvious.Exploring the response characteristics of two important biological pathways,oil accumulation and photosynthesis,to heat stress during B.napus seed filling is helpful in the genetic improvement of heat-tolerant rapeseed.The effects of heat stress on seed oil accumulation and chlorophyll fluorescence characteristics of 29 B.napus germplasms with different oil content and environmental sensitivity,including 6 rapeseed varieties which exhibited environmentsensitive/insensitive and with high,medium or low oil content,were tested by whole plant heat stress or the in vitro silique culture system.Both assay exhibited similar trend on oil content of the rapeseed germplasms.The heat effect on the chlorophyll fluorescence kinetic parameters F_(v)/F_(m),ETR and Y(Ⅱ)were also consistent.Heat stress significantly decreased oil content,although there was abundant genetic variation on heat tolerance among the genotypes.Correlation analysis showed that the decrease rate of F_(v)/F_(m) of silique heat-stressed B.napus developing seed was positive correlative to the decrease rate of mature seed oil content of the whole plant heat-stressed rapeseed(R=0.9214,P-value<0.01).Overall,the results indicated that heat stress inhibited oil accumulation and photosynthesis in B.napus developing seed.The decrease rate of chlorophyll fluorescence parameter F_(v)/F_(m) of heat-stressed developing seed could be used as the index of heat tolerant rapeseed identification.Further,two heat insensitive rapeseed varieties with high oil content were identified.

Optimization of Oil Extraction Conditions from Watermelon Seeds by Response Surface Methodology

Response surface methodology was used to optimize the extraction conditions of oil from watermelon seeds. Based on single factor experiments, the material to liquid ratio, extraction time and extraction solvent exhibited the highest effects on oil extraction. The mathematical model was established according to the Box-Behnken central composite design. The optimal extraction conditions consisted of a material to liquid ratio of 1：16.3 （g/ml）, an extraction time of 45.4 min, and petroleum ether as the organic solvent. The predicted and actual yields of watermelon seed oil were 27.92% and 28.04%, respectively. The extracted oil was analyzed by GC-MS. The results revealed that watermelon seed oil contained several types of acids and esters ; the relative percentages of the components were determined by a normalization method. The main fatty acids included linoleic acid, palmitic acid, oleic acid, and stearic acid, which accounted for 91.24% of the total components.

Valorization of Griffonia simplicifolia Seed Oil for Biodiesel Production: A Sustainable Alternative

Bio-derived oxygenated hydrocarbons, such as mixtures of fatty acid methyl esters (biodiesel), are promising alternatives for alleviating the adverse effects of fossil fuel consumption on climate change and preventing petroleum resource depletion. However, the selection of a viable feedstock for competitive biodiesel production remains challenging. Recent studies focusing on Griffonia simplicifolia seeds, the sole plant industrially exploited for 5-hydroxy- tryptophan (5-HTP) extraction, have shown that G. simplicifolia seed oil (GSO) can be solvent-extracted directly from ground seeds or the remaining seed cakes obtained after 5-HTP extraction with quantitative yields. This work documents the conversion of GSO into biodiesel through homogeneous base-catalyzed transesterification. The refractive index and density of the obtained methyl ester mixtures decreased with increasing oil-to-methanol molar ratio, reaction temperature, and time. Under specific conditions, 1.43 wt% FFA oil, 63.5C, 60 min, and 1:9 oil/MeOH molar ratio with 1.2 wt% NaOH or 1.3 wt% KOH as catalysts, optimal reaction conditions were reached. There were no significant differences in the potential for diminution of the refractive index and density between the NaOH and KOH catalysts. The predicted fuel properties based on the fatty acid composition determined by GC-MS showed that G. simplicifolia biodiesel exhibited a cetane index of 50.29, volumetric energy density of 34.97 MJ/L, cloud point of -1.03°C, kinematic viscosity of 4.07 mm2/s, and oxidative stability of 0.65 h. Apart from its unfavorable oxidative stability and slightly lower energy density compared to petrodiesel, all other calculated parameters met the current standards. The valorization concept proposed in this study should be integrated into the 5-HTP extraction process, preferably using the remaining dry seed cakes as raw materials to maximize revenue in a bioeconomic and sustainable approach.

Fatty Acid Composition of Hazelnut Kernel Oil from Coula edulis Collected in the Republic of Congo

Coula edulis is non-timber forest product (NTFP) used in Africa for its hazelnuts, which contain edible seeds with a demonstrated nutritional potential. However, there have been very few scientific studies of this species in the Republic of Congo. Thus, the aim of the current study was therefore to determine the fatty acid composition of the oil extracted from Coula edulis hazelnut seeds collected at random in the Republic of Congo. The oil was extracted using the Soxhlet method and its fatty acid composition was determined by gas chromatography. The extracted oil from Coula edulis hazelnut kernels is rich in monounsaturated fatty acids (95.28%), particularly oleic acid (94.5%), which classifies it as an oleic oil and gives it interesting nutritional and therapeutic properties. On the other hand, saturated fatty acids (4.15%) and polyunsaturated fatty acids (0.35%) are not well represented. Its low poly-unsaturated fatty acid content makes it more stable when stored at room temperature.

Antioxidant Enrichment of Baobab Fruit Pulp Treated with Oil Extracted from the Seeds

The effect of the application of oil from baobab seeds on the antioxidant capacity and stability of ascorbic acid in the fruit pulp at varying temperature were evaluated. Ascorbic acid analysis of the fruit pulp revealed that the concentration in the raw extract of the pulp sullied rapidly matched with the extract treated with the seed oil. Compared with the raw extracts the formulated fruit pulp presented the highest concentration of the total ascorbic acid when both samples were subjected to varying temperatures at extended time periods. The results clearly indicated the antioxidant enrichment property of the baobab seed oil. This study demonstrates the potential of oil derived from baobab seed as having antioxidant enrichment capacity and might be a potential ingredient in pharmaceutical cosmetics formulations and food preparations.

Ultrasound-Assisted Aqueous Enzymatic Extraction of Oil from Perilla(Perilla frutescens L.)Seeds

In the present study the effects of ultrasonic pretreatment and the types of enzyme on oil yield were investigated.The optimum ultrasonic pretreatment parameters were found to be 250 W of ultrasonic power,30 min of ultrasonic time,and 50℃of ultrasonic temperature.Five types of enzyme,Cellulase,Viscozyme L,Alcalase 2.4L,Protex 6L,and Protex 7L,were evaluated for their effectiveness in releasing oil from ultrasonic pretreated perilla seeds.The highest oil yield of 81.74%was observed in cellulase treated perilla seed samples.The physicochemical properties of the control,hexane,and enzyme extracted perilla seed oils were compared.No significant(P>0.05)differences were observed in iodine value,refractive index,unsaponifiable matter,saponification value,peroxide value,and acid value.

A Comparative Study of Transesterification of Hydnocapus weightiana Seed Oil Using Calcined and Acid Activated Natural Heterogeneous Catalyst and Its Kinetic Study

The world’s total fossil fuel consumption has been significantly increasing with consequential increased environmental catastrophes. A hunt for an alternate energy source was stimulated. Biofuel is a plausible option in this pursuit due to its ideal qualities which included but are not limited to renewability and environmental friendliness. However, the pump price of biodiesel is still very high due mainly to the high cost of the production of the commodity which is influenced by the feedstock and the homogeneous nature of catalyst used. Heterogeneous catalyst was prepared by using Pila globosa sea snail shells prepared by calcination (CP8) and by acid activation (PTW1M). Hydnocapus weightiana seed oil (Non-edible feedstock) was extracted using the soxhlet extraction method and was used for biofuel production with a methanol oil ratio of 3:1. Agitation speed 800, 600 rmp, reaction temperatures of 70°C, 60°C, catalyst concentration (3.00, 2.00 wt%) and reaction time (70 and 60 min) was maintained for CP8 and PTW1M respectively. The rate of the reaction followed a reversible second-order reaction rate. Re-usability accessed. From TGA analysis, the best calcination temperature was 800°C. SEM results showed improved surface morphology after calcination, especially for CP8. FTIR analysis showed the elimination of volatiles and formation of CaO and CaO4Te after calcination. The reaction rate constant at different temperatures was 0.0287 at 30°C, 0.1200 at 50°C and 0.1142 at 70°C and activation energy of the ethyl ester was 49.49 KJ/mol. Using CP8. Most of the fuel properties met with ASTM 6751 standard. The result of the re-usability showed that the biodiesel yield declined as follows: 92, 86, 80, 73 and 69 % for CP8 and 85, 84, 81, 76, 65. For PTW1M. After the fifth regeneration cycle, both CP8 and PTW1M samples of Pila globosa sea snail shell catalyst proved effective in transesterification reaction of Hydnocapus weightiana seed oil using ethanol. It was observed that the calcined catalyst (CP8) showed a superior catalytic performance.